UIQ to Series 60 software

I went with Nokia N70 on orange because of various features including quickword. I have purchased UIQ software that does the same thing including editing etc for my previous phone. On getting the phone a few things were not as I expected including the Quickword etc being read only. Is there anyway of converting UIQ software to series 60?

You can't convert ready-made UIQ apps for S60. The original developer can rewrite the UIQ specific bits for S60.
There is a QuickOffice Premier for S60 that allows editing (whereas the default "non-Premier" version is only good for viewing).
http://www.quickoffice.com/

Similar Messages

Deskjet 3510 series [C1181] software?

Hi everyone, I have been having a problem with my printer; HP Deskjet Ink Advantage 3515 especially with the scanning and wireless printing. So today I opted to uninstall the software and reinstall the software from the internet. All was going well until I reached a point where I was to add the printer as the default one and it was to get the software for a "HP Deskjet 3510 [C1181] series" for which the error message was that it could not be found. I unfortunately cannot find the installation CD and as such cannot install manually. Any chance I can get this software through some link?

For a mac
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=4158&product=5157483&softw...
go to the link choose the version of OSX and install it
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

C310 series scanner software unavailable for Maverick

Since I upgraded my OS to Maverick the past spring, I haven't been able to use the HP scan application that came with the all-in-one printer. After waiting for so long, I checked it again this afternoon and thought that that should be updated after such a long period. However, the HP scan application just crashed and displayed a message that the old version didn't work with the current OS. Therefore I followed the instructions of "Installing Your HP Printer Driver and Software for Mac OS X" to uninstall the old version and add the printer to the list. While I'm able to print, but I still CANNOT scan.
I tried to solve the issue by following this page: Scan from OS X v10.9 Mavericks Without HP Software for HP Multifunction Printers, but none of the three options worked for me. Indeed I was told that the scanner software is not installed, but that software is NOT available for download. Remember, the original HP scan application that came from the package doesn't work with the current OS.
It's very frustrating at this point. Do I need to purchase another scanner at this point? If I do, I know I will NOT choose HP any more.
Thanks for the help!

Hello @WantToScan,
I would like to assist you further with the scan issue you're experiencing on your Mac OS X 10.9 Operating System when trying to scan to your HP Photosmart Premium e-All-in-One Printer. Now I understand by your prior post, that you have already ran through the standard troubleshooting steps to no avail. At this point I will be offering additional troubleshooting steps for you to run through to resolve this issue. Now, HP has not released a downloadable Full Feature Software and Driver for your printer since Mac OS X 10.8. There will not be a downloadable Full Feature Software and Driver download for Mac OS X 10.9, nor Mac OS X 10.10. However, the HP drivers are available for your HP Printer via the Apple Updates and you should still have full product functionality. With that being said, please run through the steps below to resolve your issue.
If using a USB Cable connection, please disconnect that cable now.
Step 1: Uninstall Drivers and Software:
In order for us to have a nice clean slate to work with, I am going to start by having you Reset the Print System on your Mac and uninstall every trace of your HP printer from your computer.
First, please click here and run through the steps provided on how to Reset the Print System. When the page opens just run the steps for 'Resetting the printing system in OS X Lion' as they are the same for Mac OS X 10.9. Resetting the Print System will remove every printer from your Mac computer. However, it does not uninstall the printers. Therefore, should you use other printers on your Mac simply ensure that they are plugged in with a USB Cable or Network connected and (+) Add them back in. Do not add your HP Photosmart back in at this time.
Once the Reset is complete, please click here to run through the uninstall steps. When the page opens, select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9'. Next, click on Method two. Run through the steps to complete the uninstall of your device. Once the uninstall is complete, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
If using a USB Cable connection, please connect that cable now. If your device is Networked, ensure your printer is ON.
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Add your Printer:
1. Click the Apple menu, and then click System Preferences.
2. Click Print & Scan, check if the name of your printer displays in the Printers list.
3. Do the following, depending on if the printer is listed or not:
If your printer is listed, remove and re-add the printer to confirm communication with the Mac. Click the name of your printer, click the minus sign (), and then delete the printer. Once the printer is removed, click the plus sign (), click Add Printer or Scanner, click the name of your printer
If your printer is not listed, click the plus sign (), click Add Printer or Scanner, click the name of your printer
4. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that you select the appropriate Photosmart driver and not the AirPrint driver as the AirPrint driver is just a generic print driver.
5. Click Add to add the printer to the list.
6. Close Print & Scan
Now, please try to print and scan again to verify if your issue is resolved.
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Is "slick" series of software for iMovie 06 compatible with leopard

I'm running Leopard 10.5.2 on a Mac Pro 1,1 but still using iLife 06. Can I use the iMovie 06 special effects software put out by Gee Three called "Slick" starter kit, filmmaker kit, and transition kit (three dvd's) with Leopard? I just resolved several hard drive and Leopard issues and don't want to install a potential troublemaker.

sorry for posting dumb questions folks. i actually went to the slick web site and got all the data i needed. again, sorry for cluttering the forum. i'm a true dummy.

Upgrading 4700 Series ACE Software from Appendix A of Admin Guide

We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and got as far as the software is loaded on the device, but when I enter a reload command, it doesn't come up with the new software. A "Show Bootvar" command shows the updated software is there but it has the old software also, see the following:
Boot Variable "image:/c4710ace-mz.3.0.0_A1_7a.bin;image:/c4710ace-mz.A1_8_0a.bin"
Config register is 0x1
I entered the "No boot system image:" command thinking that this would unset the previously configured boot variable, but it didn't seem too.
Any insight? Thanks, Chris.

Hopefully this is something simple and someone will respond...We have an ACE 4710 device and want to update the software to the latest version (c4710ace-mz.A1_8_0a). We are following the instructions on the Upgrading Your ACE Software document and got as far as the software is loaded on the device, but when I enter a reload command, it doesn't come up with the new software. A "Show Bootvar" command shows the updated software is there but it has the old software also, see the following:
Boot Variable "image:/c4710ace-mz.3.0.0_A1_7a.bin;image:/c4710ace-mz.A1_8_0a.bin"
Config register is 0x1
I entered the "No boot system image:" command thinking that this would unset the previously configured boot variable, but it didn't seem too.
Any insight? Thanks, Chris.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Computer will not boot up after recent software install

I recently tried to install a series of software updates. Not all were successful. Soon therafter the computer froze up while in safari. I turned it off and the computer would not boot up on restart, and instead sent me to the darwin login screen. I rebooted in safe mode per these forums, and turned off an itunes startup function, and then rebooted. That seemed to do the trick as I could now get back into the OS, but the computer was dreadfully slow. It froze up again in Safari and I turned it off again, and this time it would not go past the grey startup screen with the apple. I tried safe mode again, but the computer would shut down around 30 seconds after the wheel below the grey apple started turning. I Was able to get my Tiger Install DVD in the drive, and turned the computer back on, but now just get the grey apple screen and the wheel spinning indefinitely. I cannot do an erase and install because my photos are not backed up. Please help!
Thanks

Hi, Deaton41. Welcome to the Discussions.
You wrote: "I recently tried to install a series of software updates. Not all were successful."I suspect the only way you are going to resolve this is by performing an Archive and Install. For important tips on this process, see my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order. If you follow my FAQ's steps to the letter, then your photos should be AOK, assuming directory corruption hasn't damaged them. I suspect directory corruption is the root cause of the unsuccessful software updates, which that then led to your current problem re: start up.
Before installing future software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Using oracle procedural gateway to connect to mq series

Hi,
I am working on setting up my connection to export data from oracle database to db2 using mq-series.
MQ-Series client software and oracle procedural gateway v9 are installed on HP-UX .
initsid.ora & initsid.gtwboot file for the gateway are configured. listener.ora and tnsnames.ora are also configured and running.
I created a dblink and then tried to test my connection using the test scripts given by IBM.
I got the following error,
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from DCY3
I generated a trace and I got the following information from listener.trc
nsopen: opening transport...
nttcnp: Validnode Table IN use; err 0x0
nttcnp: getting sockname
nttcnr: waiting to accept a connection.
nttcnr: getting sockname
nttvlser: valid node check on incoming node 172.25.228.7
nttvlser: Accepted Entry: 172.25.228.7
nttcon: set TCP_NODELAY on 11
nsopen: transport is open
nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
nsopen: global context check-in (to slot 4) complete
nsanswer: deferring connect attempt; at stage 5
nscon: doing connect handshake...
nscon: got NSPTCN packet
nsevdansw: exit
nsbeqaddr: connecting...
sntpcall: About to exec /u46/oracle/app/oracle/product/bin/pg4mqc90drv
sntpcall: detaching from parent with additional fork
sntpcall: only 0 bytes read
sntpcall: Can't read from pipe; err[1] = 32
nserror: nsres: id=4, op=72, ns=12547, ns2=12560; nt[0]=517, nt[1]=32, nt[2]=0;
ora[0]=0, ora[1]=0, ora[2]=0
nscon: sending NSPTRF packet
nstimarmed: no timer allocated
nsclose: closing transport
nsclose: global context check-out (from slot 4) complete
nsglecmd: Deallocating cxd 0x40045ef0.
Listener.log gave me the following information,
12-JAN-2010 14:47:34 * (CONNECT_DATA=(SID=dcy3)) * (ADDRESS=(PROTOCOL=tcp)(HOST=
172.25.228.7)(PORT=59501)) * establish * dcy3 * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
HPUX Error: 32: Broken pipe
I researched online and made sure that I have enough swap,memory on my OS.I increased the value for processes in init.ora file.
My log files have not exceeded the maximum limit.
The trace shows that my listener is loosing contact when it is trying to read the driver from /u46/oracle/app/oracle/product/bin/pg4mqc90drv.
I am not sure how to proceed from this point,though I have a thought of relinking my libraries in oracle.
Can anyone give any information on this.

Hi,
listener.ora,
DCY3LSNR =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL=IPC)
(KEY=ORAIPC)
(ADDRESS =
(PROTOCOL=TCP)
(HOST=fngtest)
(PORT=1414)
SID_LIST_DCY3LSNR =
(SID_LIST =
(SID_DESC =
(SID_NAME=DCY3)
(ORACLE_HOME=/u46/oracle/app/oracle/product)
(PROGRAM=pg4mqc90drv)
STARTUP_WAIT_TIME_DCY3LSNR=0
CONNECT_TIMEOUT_DCY3LSNR=1000
TRACE_LEVEL_DCY3LSNR=4
TRACE_DIRECTORY_DCY3LSNR=/u46/oracle/app/oracle/product/network/trace
TRACE_FILE_DCY3LSNR=listener
LOG_DIRECTORY_DCY3LSNR=/u46/oracle/app/oracle/product/network/log
LOG_FILE_DCY3LSNR=listener
$ cat initDCY3.ora
#===========================================================================
# GATEWAY INITIALIZATION FILE:
# Oracle Procedural Gateway for IBM MQSeries Client (pg4mqc90).
#===========================================================================
SET HS_DB_NAME=
SET HS_DB_DOMAIN=
SET LOG_DESTINATION=/u46/oracle/app/oracle/product/pg4mqseries/log/DCY3.log
SET QUEUE_MANAGER=DCY3
SET AUTHORIZATION_MODEL=RELAXED
SET TRANSACTION_MODEL=SINGLE_SITE
SET TRANSACTION_LOG_QUEUE=tx_queue_name
SET TRANSACTION_RECOVERY_USER=rec_user
SET TRANSACTION_RECOVERY_PASSWORD=rec_password
SET TRACE_LEVEL=0
$ cat initDCY3.gtwboot
#============================================================================
# GATEWAY BOOT FILE:
# Oracle Procedural Gateway for IBM MQSeries Client (pg4mqc90).
#============================================================================
GATEWAY_SID=DCY3
SERVER_PATH=/u46/oracle/app/oracle/product/bin/pg4mqc90
LOG_DESTINATION=/u46/oracle/app/oracle/product/pg4mqseries/log/DCY3boot.log
LD_LIBRARY_PATH=/usr/lib:/opt/mqm/lib:/u46/oracle/app/oracle/product/lib
MQSERVER=FNGTEST.DCY3/TCP/TCPIP03
#MQCCSID=850
#MODE=DEBUG
I have pasted my listener.ora and init files.
Can anyone pls give me more information on this.

Cannot install the software for my new printer

I just purchased this printer yesterday and have been working all this time trying to get the software installed. I've used the CD that comes with the printer. I've used the online software and used the assistant to download and install. I've gone through many of the forums here and troubleshooted with all I've seen. I keep getting the error message cannot install. I'm getting frustrated at something so simple in the past has become a chore. I have only used HP products for my scanners/printers and I'm afraid my next step may be to pack this unit up and take it back to the store for a different brand. Please help.

Hello , Welcome to the HP Forums, and thanks for posting. I understand you are having an issue installing your new HP LaserJet Pro M177fw MFP on a Windows 7 computer. I'd love to help you with this. I would recommend first clearing the temp files on your computer to make sure there isn't anything there that is preventing the installation. Here are the instructions: Restart your computer.Click on your Start Menu.In the Search bar, type in %temp%, then press enter. Your Temp folder will open.On your keyboard. Select Ctrl + A (this will select all files)Hit the delete button on your keyboard to remove all temp files.Then I would recommend doing a clean boot of your computer. This will turn off any non-microsoft programs that are loading when you start your computer, to avoid any conflicts with the installer. You can follow the steps here to do a cleanboot: How to perform a clean boot in Windows Once the computer has started up again, try downloading and installing from the HP website: HP Color LaserJet Pro MFP M177 Series Full Software and Drivers If you are still unable to install the printer, try running the MS Fix It tool. This is a tool supplied by Microsoft to resolve Operating System issues, and this version is specific to issues when installing or uninstalling: Fix problems that programs cannot be installed or uninstalled Please respond to let me know if this helped to resolve your issue!Good luck.

TC Software Now in Maintenance Mode

FYI, I noticed the below statement at the bottom of the MX800 Dual announcement, appears the TC software for C/EX/older MX series is now in maintenance mode, and only be updated with security and bug fixes which means the last major release of TC software is most likely TC7. It also means that the endpoints noted in the statement will have a new series of software with an abbreviation of "CE" starting with version 8 instead of continuing to use TC as it currently is now. In that announcement there is some information regarding the Collaboration Endpoint Software and it's features, also including full Proximity support.
*Products supporting the Collaboration Endpoint Software 8.0 platform include the SX10, SX20, SX80, MX200 G2, MX300 G2, MX700, MX800 Single and MX800 Dual. The TC platform will now be on maintenance mode for security and bug fixes only.

Not surprising considering all of the C-series are now EOS/EOL, anyways, what really caught my attention was this one: "Intelligent Proximity will also enable wireless content sharing from Macs and PCs" - which is absolutely brilliant - or, it would be if they got rid of, or somehow restricted call control access. Having said that, they might have dealt with that as well in CE8.
/jens

Error Adding Printer Samsung CLX-3180 Series OSX 10.9

MacBook Pro Retinta Display OS X 10.9.4 8 G RAM; 2 GHz Intel Core
I am having troubling adding a printer to my recently purchased Macbook
I downloaded the drivers from the Samsung website for the CLX-3180 Series, the software installs (at least it says it did).
I then go to add printer under printers/scanners and select Samsung CLX-3180 Series from the window. Messages indicate that the software was downloaded and updated and then I get the message "An error occurred while trying to add the selected device; Unable to find an appropriate software on your system after running software update."
I then reset the printer system, update the system software, restarted the laptop and tried again; still get the same error message.
No clue what to do next.

OS X Mavericks: Reset the printing system

Software updates - client behaviour

I deployed SUP role and clients in test collection I deployed updates to got their updates. However I noticed two "weird" things on client machines (I am talking about test environment since I am learning SCCM 2012 R2):
Update settings in Control Panel - Windows Update are not grayed-out (in production I have WSUS server and GPO pointing clients to WSUS and these settings are grayed-out - I do not have SCCM in production)
In Software Center user has complete look at update process but e.g. if user picks some update that has been installed and requires restart, in lower-right corner there is button RESTART - I did not try but I assume user (me) could have pressed this
button and in doing so installation of remaining updates would have been interrupted
How to troubleshoot this? I took a look at software updates client settings and I did not notice any settings related to problems I depicted above. In my opinion update settings should have been grayed-out and RESTART button should not have been available before
all updates are installed - then RESTART is inevitable action.

Changes to those settings won't prevent the ConfigMgr client from triggering the WUA agent for the configured scans and installations. If you want to prevent access to those features you can use GPOs.
For a nice blog series about software updates and GPOs, see the following links (it's written for ConfigMgr 2007, but still works the same in ConfigMgr 2012):
http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Upgrade 5800 xm software or not ?

Hi there,
I have a brand new 5800xm blue serie with software 10.0.010.blue.01 The question is should I upgrade it to version 20 ......or wait for new release ?? I learned so many problems updating the phone that now I am confuse.!!!!
Why nokia is selling phone not properly operating ????? we pay the phone to be new operating properly not garbages !!!
It seems to me that without upgrade the software the front camera of the phone will never work !!!! HOW IS THIS POSSIBLE ??
In my life I got only nokia cells but this is really the worst one

yes it is always advisible to update the firmware to the latest version. these are just some improvements over the previous firmware versions.
Faster operation, speed improvements for Java apps as well. - Geo-Tagging support for both camera and the video recorder.
- Tabs on messaging application are bigger and has animation when selecting next set of tabs.
- Secondary Camera can be used to take pictures
- Gallery loads much faster.
- Improvements to the camera.
- New music and download icons
- Better touch sensitivity.
- Flash applications now have a D-pad, like the java ones.
- Improvements to Mass Storage profile stability.
- 3 new application have been added. “app.update” (in the application menu), “Dictionary” and Search (for files and media in storage and web).
- Better bass reproduction.
- Ability to edit the Artist, Album, Genre etc in the Music Player.
- Zoom, Full Screen and Pan options for Flash video.
- Much faster screen rotation.
- Voice recorded files now show up in the Sounds folder in the Gallery.
** source shayesta
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
Is there a DVD i could download or be sent for Win 7.
Whats the best way to proceed...
Thanks
red

OK I got it!!
I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
thanks for any suggestions.

Uninstalling audio software? k8n neo2.

how do you unistall the msi audio software? its not listed in add/remove software.
sorry about the noob question.

Download this :
http://ftp://210.51.181.211/pc/ac97/alc650/wdm_a365.exe
From here:
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
This is realtek's latest (A3.65) software package for the neo ALC sound chip .
(Msi use 3.59 i think)
Install it (full all default choices) .
This would clear up the install/uninstall info .
Reboot .
If you want it uninstalled it should be in the add remove (also mark add/remove to show updates so you don't miss anything)

UIQ to Series 60 software

Similar Messages

Maybe you are looking for