Find edit timing of clips with offline media?

Adobe Premiere Pro CS3 version 3.2.0 (374)
I was working on a project when one day the source video files were not supported.
The program would be unable to find the source file and ask where it was. When I selected it, a "File Import Failure" dialogue box came up and simply stated "Unsupported format or damaged file."
This is the type of video file I was working with:
Video: MPEG4 Video (H264) 640x362 (40:17) 25.00fps [Video]
Audio: AAC 48000Hz stereo 1536kbps [Audio]
So now I can only open the project with the source media offline. Is there any way to show info on an edited clip? I want to re-import the videos in a supported format and re-edit them, but I need the exact timing info of the cuts based on the source file.
Thanks!

You've lost the ability to work with MPEG here. The only solution is to deactivate PP, uninstall it, run the Adobe Clean Script, reboot, reinstall the software, then reactivate it.

Similar Messages

Imovie 08 glitches - can't select/edit/or modify clips with

I have used imovie 08 for multiple projects with no problems. My HD has plenty of space, and imovie is the only application open.
I can download video and audio from a camera in the events pane. Here are the problems:
1. Can skim the event video, but can't see where I am at or control the vertical line that runs left to right.
2. I can't select a specific piece of video out of the events pane to put in the project pane unless it is pre-cut/already there.
3. Once the video clip goes from event into project pane, I cannot trim it in any way.
4. I can get it to pull up cropping and audio.
Basically, I can't tell where I am at in the events pane while skimming, and I also cannot select peices of clips in the events pane. I also can't trim video in the project pane once some video goes in there.
Any help would be appreciated. It has worked great for three months of several projects, and now it is really acting up.
KP

Have the exact same problem, up till now everything worked fine. Not sure when it started, various OS - iApps - QT updates recently, but here it is. I dragged a 90 minute .mov file to the clips pane, 55 minutes of importing (including the 5 minute beach ball at the end) and although the drop down finder bar menus work I can't select anything in the window including the clip itself, timeline/clip viewer switch, or the red-yellow-green buttons at the top left corner. Although "select all" is available in the edit drop down menu nothing selects. Tried tossing the com.apple.imovie.plist with no change. Opened a new movie with nothing imported same thing.
Any ideas?
Thanks

Opening an iMovie Clip with Windows media player

Is it possible to convert a clip created in iMovie to be opened in a PC (windows Media Player)
Thanks

RobbieSnr wrote:
AppleMan1958 wrote:
You will need [Flip4Mac|http://www.telestream.net/flip4mac-wmv/overview.htm]
I have a similar problem, which is that I want a Windows user to be able to view my iMovie file using Windows Media Player. I have Flip4Mac on my Mac but isn't that for converting the other way around - for viewing a Windows Media Player file on a Mac?
Sorry, I see that there is a Studio version that allows conversion to wmv - I only had the free basic version for Flip4Mac - should have looked more closely at the website!

Office365(Click to Run) Deployment with MDT Offline Media

Hi,
I have a scenario where i have to deploy Office365 using click to run with MDT offline media. Now the problem is with configuration.xml file in which we specify the source path of office files.
Here in this scenario as i have to deploy client machines with offline media, so in this case what will be the path in the config.xml file?
For testing purpose, after downloading the office source files, placed the setup.exe,config.xml file and office source folder in a same folder. Here is the config.xml file that i am using
<Configuration>
<Add SourcePath=" " OfficeClientEdition="32" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
</Configuration>
In source path, i leave it blank,so that it will use the office source files which was saved in the same folder.
Then in MDT server, created a new application for Office365.In command line used the command :- setup.exe /config configuration.xml
Created a new task sequence for OS deployment and added the step install application for installation of Office365.
After creating a selection profile for the deployment, created a offline media for deployment of client machine.
Now while i am running the offline media on the bare-metal machine, after OS installation the deployment got stuck at step install Office 365. Got error message pop up, according to which internet connection needed during installation process so that the
click to run set-up will download the office source files, It means this will not use the previously downloaded file which was saved in the same folder.
So this is what my problem is.. How can i customize the configuration.xml file so that i can install office 365 with offline media.
Regards
Pallavi

<Add SourcePath=" "
....In source path, i leave it blank,so that it will use the office source files which was saved in the same folder.
As per
https://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_AddElement
SourcePath indicates the installation source path from which to install Office when you run the Office Deployment Tool in
configure mode. If you don’t specify SourcePath in
configure mode, Setup will look in the current folder for the Office source files. If the Office source files aren’t found in the current folder, Setup will look on Office 365 for them
So, for the /configure mode, you should remove the Sourcepath element completely - do not specify as <space>
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Reconnecting offline media issues after moving files

Hi I am having a bit of a headache with offline media files in final cut. Our data requirements have recently outgrown the internal drives on our mac pro so we have switched to keeping all of our footage/projects etc on an external network raid (freenas). After moving all the footage over to the new drive final cut understandably asks to reconnect media so I point it in the direction of the new location and click search.... It searches through but finds nothing so I hit locate and manually point it to one of the offline files. It finds maybe 2or3 (out of over 2500) of the files then asks to locate more and so on. I spent an afternoon reconnecting all the offline media and all was fine until today when half the files showed as offline as final cut decided to start looking for them in their old location and not the new location I specified previously so I had to spend hours reconnecting them manually a few at a time again.
I'm worried that I would needto make a quick change to the edit and when I open a project final cut has a tantrum and says stuff is offline then won't let me quickly reconnect everything at once, instead making me do it one or two clips at a time
Does anyone know why it's doing this and what I need to do to make it stop???
Many thanks in advance!

I hate to say 'you built this house' but you might have. Although FCP's media manager has been crap since it came into being in v2... it still is the best way to move media around. BUT - THAT said, if you at least kept the CAPTURE SCRATCH folders intact it shouldn't have been that much of a problem to get stuff loaded back in.
I'd say... keep plugging away, bit by bit.
Good luck,
CaptM

Importing Final Cut Pro 10.1 clips to the Media Browser

I am trying to use my video in my iBook story and I can't find how to share my Final Cut Pro 10.1 clips with the Media Browsers. Has anyone run into this problem? I was at a One to One today and it stumped us all. Sharon

I am trying to use my video in my iBook
From the help files....
Video and audio files: M4V, M4ANote: For the Media widget, you can add a video file or an audio file (in a format QuickTime supports) to your book. You can convert other types of files using iMovie, QuickTime Player, or Compressor. For the HTML widget, the suggested file formats are MP4 video files and M4A audio files.

Audigy ls and no sound with Windows media playe

I have an audigy ls and can play music with winamp, and dvd's with power dvd. However, when i receive audio/video clips via email, i am not able to get audio when i play the clips with windows media player 9. The video works fine. the trouble shooter tells me taht there is no hard ware installed or the device is being used by another program or the device is not functioning properly. i get error codes 0xC00DBA: Cannot play the file and Condition ID = 0x00000000. Anyone have any suggestions? Thank you, Sid

Thanks Jeremy,
However, when i try to play MP3's that i can play on winamp, I receive the same error messages as I mentioned above. I know that the MP3's are good... I can play them on winamp without problems. And I've been able to convert them ot WAV files and burned them on CD-R's and they ahve worked fine. the problems seems to be between media player and the sound card/drivers.
Sid

How do I find the "Offline Media" or otherwise fix this?

When I try to encode a particular 30 minute timeline (I have successfully encoded other shorter timelines for Blu-ray before, in between, and after getting errors on this timeline) I get this error message - "Offline material is present in this export and will be encoded using the Offline Media graphic". I have spent hours going through the timeline frame by frame and cannot find any "offline material." As far as I can tell nothing is offline.
Presumably, Premiere Pro "knows" what is offline. Is there any way to get Premiere Pro to indicate to me WHAT it "believes" is offline and WHERE on the timeline it believes that material is?
Yesterday, even though this error appeared, I successfully encoded this timeline for DVD. It encoded fine and a frame by frame examination of the encoded video by two people did not find any sign of "the Offline Media graphic" or any sound problem.
I decided the error message was itself an error and have spent nearly all day yesterday and today trying to encode the timeline for Blu-Ray. I have tried the unmodified AME presets "H.264 Blu-ray" and "MPEG2 Blu-ray". Both generate the same error message -- "Error compiling file. Unknown error."
I have tried to EXPORT it directly from Premiere Pro and from an AME QUEUE. The result are exactly the same either way.
The encode appears to proceed normally, but after about
I am working on a 2 x 2.4 Ghz Quad-Core Intel Xeon MAC running with a OSx (10.8.5) with 28 GB of 1066 MHz DDR3 RAM. It has an nVidia graphics card, but at the moment I can't get this box to show me which one, so I will send this message now and update that bit of info if someone requires it.

WELL... that was weird. Thank you all for your advise, but it seems I was mislead by Premiere Pro, so I must apologize for unintentionally misleading you.
I STILL get the error message - "Offline material is present in this export and will be encoded using the Offline Media graphic".
And after following the advice I got from Michael MTT and checking every single one of the dozen of offline clips in the project... I know absolutely that there is not a single offline clip in the timeline I'm working on and that the error message is indeed a mistake by Premiere Pro.
But the solution to the "Error compiling file. Unknown error." message turned out to be truly weird. It was generated by a corrupted video effect (color correction) on a 2 second clip.
As I mentioned, I also work on an Avid system and when a timeline on the Avid has this sort of problem I do a "video mixdown" which PP calls "nesting". Based on the success of that procedure I decided to try nesting all the video tracks in this troublesome PP timeline. That turned the render line above of the timeline entirely RED. So I did a RENDER ALL (is that what it's called?) and about a quarter of the way through the timeline, up popped "Error compiling file. Unknown error." The rendered line was green up to a point and then red. Finally, I had a place to look and what I discovered when I did was that when I played through that part of the timeline it was holding the previous graphic as a still through the clip with the corrupted effect on it, but the criminal clip was not being played. I dug around, found the corrupted effect, which was the third of three identical color corrections applied to that clip. I deleted it and POP the everything displayed and rendered and encoded perfectly.
Thanks again all.

How to work with low quality offline media efficiently?

I have a late 2013 rMBP with an NVIDA GPU that is a fantastic platform for editing when I am travelling. The downside is that it doesn't have allot of storage and when I have high bit rate material it can struggle. I often shoot DNxHD 220 on an Atomos Ninja 2 and for a recent project I used AME to convert all of this to DNxHD 36. I then kept the original files on my NAS and copied the low quality files to my laptop to edit while travelling. This worked really nicely, but when it comes to rendering out the finished project it can be laborious to switch the media files. I have numerous clips and I had to go to each one and follow these steps: Adobe Premiere Pro Help | Create clips for offline editing
Is there a way of replacing all clips in a bin rather than doing it one by one? This time I had 30 clips which was annoying but not the end of the world. For future projects this could be many more clips and currently the process documented in the Premier help is going to be time consuming and annoying. Does anyone have any tips or are there new features in the latest CC updates which allow this type of functionality to be done in bulk?

shooternz uses a LOT of digital intermediate workflow ... he might have ideas on this, hope he chimes in ...
Neil

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Media Encoder saying .mov clip is offline during export whn it isn't

Premiere Pro CC user here. Sorry for the lack of detail. I'm on break at work on a different computer and unable access the project until tonight but need an answer asap.
I'm trying to export a H264 video which renders and plays fine on the timeline in Premiere, only, when I queue the content on Media Encoder, I get a message saying that there is some offline content in the sequence, If I go ahead with the export, the said clip is displayed with a 'Media Offline' card.
The actual clip is .mov lower third graphic downloaded from a graphics site that I've never experienced problems with before and, as I said, it renders and plays fine on the timeline. Premiere never seems to have any problem locating it as it's stored in the same place as everything else. The only indication I have that there's anything at all different about the clip is that it appears purple on the timeline.
This might be something obvious but it's nothing I've ever come across and google isn't yielding any answers so I was hoping somebody might have a solution.

I have the same problem, it happens to me only with mpeg from captured the sony hvr and h.264 in mp4 format. Looks and plays fine in premiere pro, can export straight from premiere but when loaded into AME shows media offline.
Yesterday I tried this and it worked:
deleted media cache both ame and premiere pro
un-ticked "enable native premiere pro sequence import"
closed ame
closed premiere
restarted premiere and sent sequence to ame, everything works fine.
Notice: it only seems to happen when importing a set of large files, and trying to export while premiere is still conforming. maybe.

Finding all clips with a specific effect applied? (CS6)

I'm just wrapping up a long (2-hour) multi-cam edit and applied the warp stabilizer effect on several clips in the project. As I was skimming the video marking chapters, I discovered some of the clips with that effect had the blue "Analyzing (Step 1)" bar across the clip. Not sure why it didn't complete the analysis and stabilization on those clips originally, but I reran the analysis/stabilization effect and those clips are clean now.
However, I'm worried I might have missed other instances of the "blue bar" in my skimming. Is there a way to search and find all clips in my timeline that I applied the warp stabilizer effect to so I can check them all?
Thanks.
roorider

Not exactly.
Any clips with an effect applied have a purple line through them. But you'll have to click the clip to see which effects are used.

Timed out error with Fp-2000 while find devices

When I try to Find Devices in MAX (version 3.1) I get the error "The connection to a remote device timed out". With the File Transfer and the Install Software I don't have the problem. I tried to use a different Workstation, different IP Address but the problem persists. Do you have a solution?
Vincenzo Pascariello

Hi,
the 2 flashes of the Status led are indicating that the software is not properly installed.
As for the Devices not found problem, I don't think the problem has to do with MAX, FP software or LabVIEW 7.1.
When devices are not found, generally there is a communication problem.
This can be possibly due to 2 situations:
1) There is a bent Pin on one of the FP-TB which is making the Fieldpoint bus not to work properly.
2) There are network problems. One way to workaround this might be to connect to the FP-2000 using a crossover cable and link directly to the PC. This avoids any network connection problems.
The last thing you need to take into account is that the FP-2000 module might be damaged and need repair.
If you are unable to get to a solution, contact NI Tech Support at
02.41.30.92.17 and ask for support with an Engineer
Regards,
AlessioD
National Instruments

Adobe Acrobat Pro cannot find moved files or files with edited names

Adobe Acrobat X Pro 10.1 cannot find recent files or files with edited names.
For instance, if a PDF file is moved in the hard disk from one foder to another, Acrobat cannot find it when trying to open it via "File - Open Recent File".
Likewise, if the name of the file is changed in the Finder.
Similarly, if a PDF file is open, it is marked with the yellow fluorescent marker of Acrobat, its name is then changed in the Finder and later on you try to save it, Acrobat says that it cannot find such file.
Yet, applications like Microsoft Word do not have any of the above problems. It would be great if Adobe could fix these serious productivity issues, which have plagued Acrobat for many years now.
How to send such feedback to Adobe?

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

Find edit timing of clips with offline media?

Similar Messages

Maybe you are looking for