Find Group counter for an insp. characteristics

Hi Friends,
I have a information of inspection characteristics that is PLMK-VERWMERKM. Now how do I find out what is group counter(PLNAL) associated for this insp. characteristics.
As we don't have PLNAL in PLMK to match it with MAPL-PLNAL I am getting multiple entries based on PLNNR condition in MAPL and not able to find which group counter is associated with which characteristics.
Please can anyone tell me how to link these QM tables?
Thanks,
Meenu.

Use FM    QPAX_PLMKB_READ_FROM_PLKO

Similar Messages

  • How to find MATCH count for #  in a String

    Hi all,
    How to find MATCH count for #  in a String.
    Ex:  6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20
    Regards,
    Balavardhan.K

    >
    balavardhan k wrote:
    > I have used below syntax to find count but it is not returning the value and SY-SUBRC  = 4.
    >
    >
    > Data : l_text type string.
    >
    > l_text = '6170#0400-0002-00#API3PT#AL#AUST#DEVE#KG#100.00#100.00#100.00#0.00##10.20'.
    >
    >
    > FIND ALL OCCURRENCES OF '#' IN L_TEXT MATCH COUNT mcnt .
    Then it's not a # but possible a horizontal tab-sign.
    Do a find on cl_abap_char_utilities=>horizontal_tab instead.
    Edited by: Maen Anachronos on Nov 23, 2010 2:48 PM

  • Find total count for Address Book?

    In Snow Leopard it was easy to find the "Total Count" for ALL CONTACTS. As soon as you clicked on ALL CONTACTS or even a GROUP in all contacts the amount showed at the bottom of the screen. LION appears to be different. I know you can click on ALL CONTACTS, scroll all the way down to find the total number of contacts (a lot of trouble). However, if you click on a GROUP the total does not show "at the bottom"??? You can go to Address Book > Edit > Edit Dirtribution List and see the totals of individual groups but ALL CONTACTS is not shown because it is a "distribution" of all contacts. Question is: Is there an easy way to find the total count not only for ALL CONTACTS but including GROUPS with out having to go to so much trouble?

    I find that if you have a critical number of cards in a group it will show the total number at the bottom of the list when you scroll down (I agree, a real nuisance!). I'm not sure what the critical number is, but I have lists with 20 cards and it doesn't show, while a list of 40 does show the total.
    I am not able to choose Edit > Edit Distribution List, since it is always greyed out. Is there are trick?
    I really find that Address Book in Lion has lost functionality – don't understand the change to a "book" format where you have to flip back and forth – would much prefer a 3 column format.

  • Where to find Shutter Count for Nikon Camera?

    Is this part of the EXIF data that Aperture displays?

    I just tried Cena's method of Exporting the file to the desktop. When I click on it and press Command - I, the shutter count doesn't show up.
    Please read my instructions ;-)
    In Aperture: show in finder (if you don't have referenced files export the file to desktop(export as original file!), open with preview app.
    Then bring up the info dialog (press Command-i) klick on the i-icon/tab, this will bring up a nikon-tab. Here you can find the shuttercount.
    You must first open the image with preview.app! before you press command-i. Then click on "i-icon".

  • Group counter

    Gurus,
    I am having 2 inspection plan for the same material with usage for first one as 3(universal) which i want to use for 89 inspetion type.
    For the same matl i have inspection plan with usage 6(goods issue) for 06 inspection type.
    Will there be conflict of interest if i have 2 inspection plan for the same material
    How should i give a group & counter for the the inspection plan

    Yes,If you want to have different usage then you have to define a plan which is having same group number but different counter(usage 3 & usage 6).And in material assignment give different counter against the materail as per usage.
    Let make me it simple...
    Say u have 2 different inspection plan for usage 3 & 6.
    So create one inspection plan group 1 Counter 1 usage 3
    Create another plan Group 1 counter 2 usage 6
    Now u have to assign the plan to same material A (but different usage).
    So when you go to header screen of inspection plan1 then in material assignment screen there you have to enter group counter 1 & 2 both for material A & plant.so when lot have origin 89 plan group 1 & counter1 get assign & when origin 06 then plan group 1 & counter 2 will get assign for the same material A.
    Cheers,
    Tushar

  • CR - giving total transaction count for few groups and 0 for few groups.

    For the column "No of First Call Resolution" I have to count no of interactions based on the Interaction Result, the formula is
    COUNT(Interaction_ID) WHERE INTERACTION_RESULT = 'FCR'
    For which, I wrote the below formula
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then Count ({14CICustomerInteractions_query.Interaction_ID})
    I have 33,232 interactions on the particular day I selected. When I try to group up and do the calculations it is giving total transaction count for few groups and 0 for few groups.
    Need Solution

    Hi,
    What field is the report grouped on?
    If you wish to find the no of interactions based on some condition and display it for every group, then here's what you need to do:
    1) Create this formula and place this on the details section:
    whileprintingrecords;
    numbervar c;
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then
    c := c + 1;
    2) Create another formula and place this one on the Group Footer:
    whileprintingrecords;
    numbervar c;
    3) Create this formula to reset the variable and place this on the Group Header:
    whileprintingrecords;
    numbervar c := 0;
    Let me know how this goes!
    -Abhilash

  • Table for finding GROUP or WEBGROUP

    Experts, does anybody know where can I find GROUP/WEBGROUP name in the database. Is there any OOTB table provided by OBIEE. My group information is coming from Siebel.I want to know where is the group information present in OBIEE datamart?
    thx,
    parag

    Hi,
    Check the below link-
    http://obieeblog.wordpress.com/2009/06/18/obiee-security-enforcement-%e2%80%93-external-database-table-authorization/
    You can see that GROUP is assigned from some table used for authorization. Similarily you too might have tables used to assign the variable.
    Refer-
    http://www.rittmanmead.com/2012/03/obiee-11g-security-week-connecting-to-active-directory-and-obtaining-group-membership-from-database-tables/
    Hope this helped/ answered
    Regards
    MuRam

  • I am trying to set up a group contact for my golf league, but can't find a way to do this on the iphone

    I am trying to set up a group contact for my golf league, but can't find a way to do this on the iphone

    That's because you can't.  You make the contact group on the computer application with which you're synching your contacts.  Or you can find an app in the app store.

  • How to find the count of tables going for fts(full table scan in oracle 10g

    HI
    how to find the count of tables going for fts(full table scan) in oracle 10g
    regards

    Hi,
    Why do you want to 'find' those tables?
    Do you want to 'avoid FTS' on those tables?
    You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
    FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
    There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'.

  • How to find the group name for a section programatically?

    I have these display formulas that are being repeated in each group footer.  The only thing that changes are the group names.
    How can I find the group name for the current section?
    The bolded(or starred) items are what I'm trying to create a generic function for.
    Ontario
         Bob
                   1000     Sales     Other
                   2000     Random     Billing
                   200     Phone     Billing
         *Total for Bob*      3200
         Sally
                   2000     Sales     Client
                   1000     Random     Billing
                    300     Cell     Billing
         *Total for Sally* 3300
    *Total for Ontario*       6500
    Thanks in advance,
    J

    I'm not sure if the GroupingLevel or GroupNumber fuctions will help.  (There description in the on-line help leaves much to be desired, IMHO...)
    If not, you could try adding formula fields to each level that sets a global variable to tell your other formula fields what level it is on.  If you only have one or two other formulas, and only one or two groups, this really wouldn't be a whole lot easier.  But if you had a lot of groups or a lot of formula fields that you want to make "group independent" it could help.
    So for each footer, create a formula field like (basic syntax):
    WhilePrintingRecords
    global geoupLevel as String
    groupLevel = "Province"
    formula = ""
    (changing the name given to groupLevel for each footer).  Then in your "generic" formula you could put something like:
    WhilePrintingRecords
    global groupLevel as string
    select case groupLevel
      case "Province"
        formula = "Total for " + {Province}
      case "Name"
        formula = "Total for " + {Name}
      else
        Formula = "Totals"
    end select
    HTH,
    Carl

  • Count() for each group, but only groups having 1+ element like... AND all elements like...

    There are tables(and columns) like:
    'Clients'(clientID)
    'Houses' (houseID)
    'Visits' (clientID, houseID, visit_date)
    'Contracts'(contractID, houseID, clientID, rentDate_from, rentDate_end)
    I have problem with writing MS SQL query of this kind:
    how many visits to houses did each client, before renting one of them?
    Its easy to count total number of Visits for each client, listing all visits + group by clientID and selecting count(*) for each group.
    Lets say this is select_1, and select_2 is listing all Contracts for all clients.
    Select_1 is not answer, because count must be performed only on groups, which:
    -have at least 1 row "like" row in select_2 (it means that at least one of visited houses was rented, because it can happen that client visited few houses, but rented other, not visited house). my idea for this is comparing select_1 and select_2 with:
    "where s1.clientID=s2.clientID and s1.houseID=s2.houseID"
    -each group must have all rows(visits) with date of same day or earlier than contract date
     maybe: "datediff(day, s1.visit_date, s2.rentDate_from) >= 0"

    In future, please provide proper DML, DDL and example data, like I have for you below.
    DECLARE @clients TABLE (clientID INT, name VARCHAR(20))
    INSERT INTO @clients (clientID, name)
    VALUES (1, 'Jonathan'),(2, 'Christopher'),(3, 'James'),(4, 'Jean-Luc'),(5, 'William')
    DECLARE @houses TABLE (houseID INT, address VARCHAR(20))
    INSERT INTO @houses (houseID, address)
    VALUES (1, 'NX01'),(2, 'NCC 1701'),(3, 'NCC 1071A'),(4, 'NCC 1701D'),(5, 'NCC 1701E')
    DECLARE @visits TABLE (clientID INT, houseID INT, visitDateTime DATETIME)
    INSERT INTO @visits (clientID, houseID, visitDateTime)
    VALUES (1,1,'2001-01-01 12:13:14'),
    (2,2,'2001-01-02 12:13:14'),
    (3,2,'2001-01-01 12:13:14'),(3,3,'2001-01-01 12:13:14'),
    (4,4,'2001-01-01 12:13:14'),(4,5,'2001-01-01 12:13:14'),
    (5,4,'2001-01-01 12:13:14'),(5,5,'2001-01-01 12:13:14')
    DECLARE @contracts TABLE (contractID INT IDENTITY, houseID INT, clientID INT, rentStartDate date, rentEndDate date)
    INSERT INTO @contracts (houseID, clientID, rentStartDate, rentEndDate)
    VALUES (1,1,'2001-01-02',NULL),(2,2,'2001-01-02',NULL),(3,3,'2001-01-02',NULL),(4,4,'2001-01-02',NULL),(5,5,'2001-01-02',NULL)
    SELECT contractID, c.houseID, c.clientID, rentStartDate, rentEndDate, cl.clientID, name, h.houseID, address, COUNT(v.clientID) AS visits
    FROM @contracts c
    LEFT OUTER JOIN @clients cl
    ON c.clientID = cl.clientID
    LEFT OUTER JOIN @houses h
    ON c.houseID = h.houseID
    LEFT OUTER JOIN @visits v
    ON c.clientID = v.clientID
    AND c.rentStartDate >= v.visitDateTime
    GROUP BY contractID, c.houseID, c.clientID, rentStartDate, rentEndDate, cl.clientID, name, h.houseID, address

  • SNMP query for multicast group count

    I want to get the total number of multicast groups on a switch. Is there an oid that will give me the info (ie. the number that's given by "show ip igmp snooping groups count")? If there is no oid, is there a way query the  groups (show ip igmp snooping groups)? I'm thinking with the 2nd option I might be able to count the number of entries returned by an snmpwalk or something and turn that into a number.
    Right now i'm logging into the switch with a script and running the command but that might be a problem with all those logins (only every 5 minutes though) so I'd like to do this via SNMP if possible.
    Any ideas?
    Thanks

    Works just fine!!!
    Thanks!
    LA$$E
    Hi,
    Well, at the very least, you can create a formula
    column in your break group using a combination of the
    same where clause as your original query and the
    break values for the group so that you are getting
    the correct records. If you have it in the break
    group, then it will execute for each record in that
    group.
    Hope that helps,
    Toby

  • Help in finding the total count for each month

    Hello everyone,
    Sometime back I had posted about the date function. I have that problem solved now my problem is that after finding all records which against each record I need to find the total count for that month if no records than I have to set it to a 0.
    Here is how my program has been written.
    PROCEDURE extract_materials
    IS
    CURSOR xyz
    BEGIN
    FOR xyz1 IN xyz LOOP
    -- once inside the loop for each of the record from
    the cursor I need to find a total count for that record for everymonth in the year.
    All these records will be instered in to a staging table
    Can you please help me out with this. I really appreciate this.
    Thanks in advance.
    -Vani

    Andrew - you missed the tricky bit of the spec - include missing months with a zero.
    You need to do an outer join to a select from any big table with a function involving rownum and add_months to generate all the possible months. However, its time to go home and I can't be bothered to work out the finer details.

  • Rows count for repetitive groups in tablix.

    Hi All,
    To make the story cut short, i will going to explain my scenario:
    i have a tablis contro and i garoup it by a field say "Field1" which contains A and B values,
    in my case we divide groups in two parts if it has rows more then 200.
    so, my report output and my required is below :
    Current Output -------------------------- Required layout
    here 200, 20, 30 are number of rows per group.
    now my requirement is if a group is repetitive
    i need the all rows count for that value like in above case :
    Header text of  Group A should be like : A(220) i.e 200 +20
    please help me on this...
    it is very urgent for me
    shashank

    hi Simon,
    thanks for reply, sorry, i skipped to mentioned that i have to provide multilevel grouping also, like 
    Group By: Field 1 -> Field 2 -> field3
    so, to achieve my requirement by Sql as solution has no problem if i do not have multilevel grouping, but i have to provide that and in that case the query will be like,
    “select distinct [column1],[Column2],[Column3],count(*) as rn from [table] group by [column1],[Column2],[Column3]”
    which is problematic in my case.
    so for doing this i need a solution apart from sql but by using SSRS Report end.
    Thanks again.
    Shashank

  • How to find out Max threads count for Custom Work Manager??

    Hi All,
    How to find out Max threads count for Custom Work Manager??
    I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
    I need to check how many threads maximum were created by my WM after lets say 1 completed day.
    The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
    Any Idea?
    regards,
    Tanmay

    Hi Ashish,
    Thanks for your response.
    The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
    For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
    Any pointers in this regard are appreciated.
    Thanks,
    Tanmay

Maybe you are looking for