Find technical name of receiving query in RSBBS assignment

Dear Experts,
under transaction RSBBS one can assign sender/receiver details. While the technical name of both sender and receiver are entered when createing the RRI, one can only retrieve a compressed ID (i.e. 46F28FNV1L4H1QENI1KKEKWUCAZPAOPRD) for the receiver in transaction RSBBS.
We would like to find a way to determine the technical name of that particular compressed ID. I have already searched the RSBBS* tables, but I cannot get past the compressed ID (field RONAM) in i.e. table RSBBSQUERY
My question:
- Can you provide me a table/view/program/transaction/... that shows the relationship between senders and receivers by means of technical query names (not ID's)?
- Or can you provide me (step-by-step) the relation between different tables and fields that would allow me to do so?
Kind regards,
PJ

Hi Simon,
thank you for your reply. I have researched your proposal, and I can indeed find the relation between my sender query's technical name ZSENDERQUERY_Q001 and the field RSBBSQUERY-RONAM that looks like this: 46U5CEI2BU3U8P8GZOFWWN3GKAZSD_C03 (Mind the name of the infoprovider at the end!).
This information can also be retrieved from transaction RSBBS, where I can enter 1 senderquery's technical name, and which returns me the associated RSBBSQUERY-RONAM values in the column "Receiver Object". Your contribution allows me to create a view to get this information for multiple sender queries from different cubes.
However, I would like to go one step further. From this RSBBSQUERY-RONAM value I would like to get the target/receiving query's technical name that looks like this "ZRECEIVERQUERY_Q002".
This is my ultimate goal as I need to delete all obsolete queries from the BI system, and the associated jumpqueries. Creating a single list by means of a view would help me a lot.
Kind regards,
Pieter-Jan

Similar Messages

While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

Identifying Technical name of a query through a portal link

Hi,
If from a portal link I see a BW report, how can I know its technical name so that I can access it in BEx to see the query definition. The title on the portal appears not to be helping.
Thanks

In the future, please do not post the same question more than once:
Identifying Technical name of a query through a portal link
Thanks!

How to change Query Description/Technical name of a query

Hi I have couple of questions with Query name changing.
1)Is it possible to change the Technical name of a query?
If Yes how?
2)I could change the description of a query but when the same query is saved in a role how to change its description?
Thanks
Ajay

hi,
open your query in query designer and use button 'save as' then you can change name description.
Remember that when you change technical name it will be completely new query and you will have to add it to your role.
Regards,
Andrzej

Find technical name of query if only internal is given (and delete it)

Hello,
a query has a readable name like "Invoice for north pole customers", a technical name like "Z_MM_CUST_NPOLE" and an generated internal name like "4BUI9VVDT8A057L8G3BQ4IN4G".
When I search which queries belong to an old multiprovider, I only get the internal query names like "4BUI9VVDT8A057L8G3BQ4IN4G". I cannot search with this internal name in the BEx Query Designer nor can I search there using the InfoArea folder (I can only find one query instead of two queries).
How do I find the technical name like "Z_MM_CUST_NPOLE"?
Apart from that, I cannot delete the query in the BEx Query Designer ("Delete" is inacitve (gray)).
The query seems corrupt. Can I delete a query in the SAP GUI (rsa1 or something like this)?
Best regards
Thomas

Hi Thomas,
You can delete the Query in BIW GUI by using T Code RSZDELETE.
After that u get a screen where u enter the
Type :- REP
Object Version :-A
Technical Name as :-"The Tech name of the Query"
Leave the other Rows Blank.
Rgds
SVU123
Edited by: svu123 on Apr 3, 2009 1:07 PM

How can i find technical name of varaibles in query 0T_FYEAR

Hi all,
I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
Can some one help out.
Thanks in advance

Hi Raj,
You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
Hope this helps...

Data target technical name for a query

Hi
Can some one tell me how to find the respective data target technical name for a report (query)?
Thanks
Abhi

Hi,
Create a View on tables RSZCOMPDIR and RSZCOMPIC and take fields INFOCUBE,COMPID and keep join condition
1) RSZCOMPDIR-COMPUID = RSZCOMPIC-COMPUID.
2) RSZCOMPDIR-COMPUID = RSZELTDIR-ELTUID.
and keep condition RSZELTDIR-DEFTP = 'REP'.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma
Message was edited by: Anil Kumar Sharma

How to check a query element based on the technical name of a query builde?

We often see, e.g., 401OQ2EEM5EJH4GQ5N2HFNE7P as a query element of a query builder. How to know what kind of InfoObj. or R2R link it would be base on the long technical name? We remember there is a table to look these up, what's the table name and how to look for it's description name?
Thanks

hi Ari,
The table you recommend seems to only work for Report to Report link, but not for query element, is there any other table that we can find which InfoObj. is used for this long technical name in query?
Thanks and we have given you rewards points.

Function module to create query view from technical name of the query ?

Hi Experts,
I am trying to create webservice definition using function module.
In this code, I am calling function module 'RSCRMBW_REPORT' which requires query view name ( we can see this in RSCRM_BAPI) as a value for parameter i_reportuid.
For the time being I am hardcoding the value but I need to use a function module which will convert techincal name of query into query view.
Can anyone have any idea about the above requirement? Or is there any other way to solve the problem?
Thanks in advance
Shamkant
Edited by: SHAMKANT SONAWANE on Apr 7, 2009 5:38 AM

Hi,
You can use FMs CONVERSION_EXIT_GENID_INPUT and CONVERSION_EXIT_GENID_OUTPUT to get query view.
First call FM CONVERSION_EXIT_GENID_INPUT with parameter input as query technical name then it will return Output in the form of GENID .
Pass this GENID as input parameter to FM CONVERSION_EXIT_GENID_OUTPUT to get query view as output.
Eg :
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_INPUT
Uppercase/Lowercase
Runtime:        6,652 Microseconds
Import parameters               Value
INPUT                           Y0IC_C03_Q0018_2
Export parameters               Value
OUTPUT                          4D1I916ID7TWS1CK27154WYZ8
Test for function group      RRI5
Function module              CONVERSION_EXIT_GENID_OUTPUT
Uppercase/Lowercase
Runtime:        2,818 Microseconds
Import parameters               Value
INPUT                           4D1I916ID7TWS1CK27154WYZ8
Export parameters               Value
OUTPUT                          0IC_C03/Y0IC_C03_Q0018_2
0IC_C03/Y0IC_C03_Q0018_2 is expected query view.
Hope it helps...
regards,
Raju

To find Role Name for a Query

Hi,
I want to find the Role Name associated with a given query. Can you please help me out, how can i find it?
Best Regards,
Venkata C

Hi,
in the QueryDesigner, press the "Where used button" (a little square with three arrows - or: seventh button from the right.) This should provide (among others) the roles.
Hi
sorry,
I checked it myself. Doesn't work. Sorry again, no other idea
cheers
sven
hth
sven
Message was edited by: Sven Muntermann

Make appear technical name and name of a query in separates columns

Hello everybody,
I have a question about menus of the Bex explorer (but maybe it's related to any menus of SAP).
I would like to show the technical name of a query or a workbook in a single column, something like :
Technical name | Name of the query/workbook | Last modification
For now, I can only the technical name or the name (or both side by side) but I can't have three separated columns.
Is there any mean you know to do this ?
Regards,
Julien DERIOT

Thanks for your quick answer but it's not exactly what I'm looking for.
When I speak about the bex, I mean when you click on the icon to open a query/workbook, you see all of them inside a window.
Actually, I can see :
Name workbook | Last changed on
And I would like to see :
Technical name | Name workbook | Last changed on

Is It POSSIBLE to change the Technical Name of Z-version Query

Hi Friends ,
I was changed all quereis and cube from standard version to Z version.
For queries, by using rszc , i was changed to Zversion,Now again is it
possible to change the Technical Name of Zversion Query ?
If possible , can you please tell me the process ?

Hi Hameed,
This may be the reason you are getting an error.
The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
It's better to approach the Bex Query designer.
Hope you understood..
Check the link below for more information:
Re: How to copy query elements without Bex
http://www.bi-expertonline.com/article.cfm?session=&id=2055
Re: copy queries + variants + workbooks -- RSZC ?
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jun 10, 2009 10:03 AM

How to find name of the Query in SE09

Hi Experts,
Can anyone tell me how do find the name of the Query which is not released.
Like for example:
When I try to open the modified requests of all the users It displays me the names of the Tables, WEB templates etc. But for Query it only shows the Elements of Query Builder only some junk data.
Please help me understand which query request that is.
Thanks

Do you have the TR no. which is released for the query.
if you go there and check in SE09, it would show you the query name i guess which are the objects included in the request.
Try this and hope this would help you.

BW 7.0 - Technical names in query designer

Hi colleagues,
is there any possibility to set an default value for the technical names in the query designer. Every time I open the query designer, the system shows me only the "text" for the query elements and not the key.
regards
Dieter Gerl

The "functional enhancement schedule" document now describe the single query refresh within a workbook to be available in Stack 14.
The link also need to be check very often. (I got a version 12.3 from 08/06/2007 which planned enhancement to SPS13 whereas version 12.5 from 28/06/2007 plan it to SPS14)
https://websmp201.sap-ag.de/~sapidb/011000358700004483762006E
Best Regards,
Davy

Find technical name of receiving query in RSBBS assignment

Similar Messages

Maybe you are looking for