FInder Dates missing

When I view a folder in finder I see all the files no problem. The date modified column only shows comma+time i.e: ,12:47
The d/m/y info is missing although it is used in the sort by date, the times are not in sequence so I am assuming the d/m/y is used in sorting.
How do I get my d/m/y to show as well? I can't find any setup option that is relevant.
TIA

That doesn't sound good. Try booting from your install disk and check the hard drive for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Message was edited by: Carolyn Samit

Similar Messages

Help me find my missing "CashFlow HD" data from my ipad!

I turned on my ipad this afternoon and found 12 months of data missing from CashFlow HD. My husband transfered some music from the imac to the ipad today and he says the data was there this morning when he put in today's purchases. Can anyone help me find my data?

Chris,
Don't quote me on this but here is a possible solution to your problem.
First get all your music files from your usb data stick or external hard drive and copy/cut (your choice) and paste the songs into your itunes music folder.
Once thier in your itunes music folder drag and drop them into your itunes library.
If that doesn't work
Take all your songs off of your usb data or your external hard drive stick and place them on your desktop.
Once the songs are on your desktop, drag and drop them into iTunes.
Once the songs are in iTunes go to Advanced> Consolidate Libary
(this takes all of your music files and places them into the iTunes music folder.)
Then you can take all of your music files and place them in a folder in your my music folder.
Again I cant guarantee this will work if it doesn't you will just have to import your songs the long way.
Also when all your music works you should make a back-up disc in iTunes that way if your computer crashes you can just insert the backup disc and it will restore all of your iTunes music, podcasts, games for your iPod, and movies.
To learn how to do this see this link:
http://docs.info.apple.com/article.html?path=iTunesWin/7.5/en/15337.html
Hope this Helps,
DJFX

Since mountain lion Find in Numbers 3-4 columns of data missing and some columns in the wrong order. Fortunately I have a back up on my iPad and was able to put that version in as a new file. Why has this happened ?

Since mountain lion I have noticed 3-4 columns of data missing from a Numbers file. I have fortunately been able to replace the total file from my iPad version but why has this happened. Makes me lose trust in Numbers

That would be strange.

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Master Data missing

Hi
I have created a report over Vendor Master Data. The problem what I am facing is I am unable to find data for some attibutes (that too for some Vendors particularly) and also there are no conditions or restricitions in the Query.
Can anybody tell whats the problem.
regards
Mahi

Hi,
Check if you have loaded the data for those missing attributes as well in the system.
Amit

Posting Document not created (export data missing)

We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
Can any one suggest the solution for this?
Thanks.

Hello Mohammad,
About this issue, the incompletion of this cancellation document
arises might because the reference delivery has been archived/deleted.
This is likely due to your current copy control settings (VTFL).
If you have set ' ', in the export determination field this means that
there is a common 'exnum' key between the delivery and billing documents
LIKP-EXNUM & VBRK-EXNUM are the same.
The result of deleting the delivery is that you also delete the FT data
for the delivery, Because the billing document and delivery share the
same foreign trade table entries, you have in effect deleted the FT data
of the billing document too. This would most likely go unnoticed but if
you then cancel the invoice the system has no FT to copy into the new
cancellation billing document, which leads to this issue.
Firstly you should set the export determination flag in the copy control
of the delivery & billing documents. This will avoid this issue in the
future. Set it to to 'A' or 'B' depending on your requirements.
For the incomplete cancellation billing document, you could use userexit to
set it as complete:
You can use transaction CMOD.
Create a project for example FT project button create short text: ....
drop button Enhancement assignment & save use for example local object.
Use the F4-help for Enhancement and look for V50EPROP.
Drop button Components:
here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
The coding in the userexits should be: C_COMPLETE = 'X'.
Afterwards activate generate ... and save.
The development class is VEI.
Please also check note 118573 which explains the FT user exits.
Regards,
Alex

Database exceptions data missing in SMD 7.1

Hello all,
I have configured SMD on SolMan 7.1 SP03. I successfully connected 2 systems (ABAP single and JAVA single) to technical monitoring. Also SolMan self-monitoring was configured successfully. I can see some monitoring data in solman_workcenter, but I don't see any data in section Database Exceptions and Database performance like e.g. tablespace usage, last successful backup, reads per usercall etc... I can see current data in Database availability section - archiver status, instance status etc... There are obviously some data missing in BI as I get an info message : "No data has been transferred to BI system up to now for metric .....". Unfortunately I can't find out where is the problem so far. I can see SMD agents are connected and pushing other data (ABAP and host related) to SMD w/o any problems. Any hint is appreciated.
Thanks.

Hi,
Check this: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/f7/51b87f807344eba0ddca2d2174cbee/frameset.htm
"A remote database connection between the DBA Cockpit and the remote database is configured and available, to gather the data for tablespaces, availability, backup status, etc. remotely. The prerequisites for database administration and monitoring are described in SAP note 1027146."
Cheers,
Diego.

PSE10 Organizer crashes when using the "find a missing person" button

I have been using PSE10 for about six months and have about 10500 images in the catalog, mostly digital but also some scanned slides I have been gradually adding. All images have been added using the "find files" button. I have been making use of tagging by using the people recognition routine and have reached the point where PSE10 says all people have been found. Since then I have gone through about 1000 individual images using the "find a missing person" button with good success until recently. Now when I try to save the tag after using the button Organizer crashes with the message "Elements 10 Organizer has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and will notify you if a solution is available". I have tried optimizing and repairing the catalog without sucess. I have also tried uninstalling and reinstalling PSE10, also without success. The catalog is in a custom location but has been since shortly after I started using PSE10 and well before this problem started. With the amount of time and effort spent doing this tagging I would not like to have to start over with a new catalog if a solution can be found. My computer is Vista 64-bit with 8GB memory. This problem is driving me nuts!! HELP!!

Log Name:
Application
Source:
Application Error
Date:
6/17/2012 2:43:28 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
KenMary-office
Description:
Faulting application PhotoshopElementsOrganizer.exe, version 10.0.0.0, time stamp 0x4e5e9821, faulting module BreezeDB.dll, version 2.0.1.1, time stamp 0x4c7c52ec, exception code 0xc0000005, fault offset 0x00023fa6, process id 0x1318, application start time 0x01cd4cd20c7d9d2c.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-17T21:43:28.000Z" />
<EventRecordID>93684</EventRecordID>
<Channel>Application</Channel>
<Computer>KenMary-office</Computer>
<Security />
</System>
<EventData>
<Data>PhotoshopElementsOrganizer.exe</Data>
<Data>10.0.0.0</Data>
<Data>4e5e9821</Data>
<Data>BreezeDB.dll</Data>
<Data>2.0.1.1</Data>
<Data>4c7c52ec</Data>
<Data>c0000005</Data>
<Data>00023fa6</Data>
<Data>1318</Data>
<Data>01cd4cd20c7d9d2c</Data>
</EventData>
</Event>
Thanks in advance for any help you can give me. There were several error entries for PSE all of which had the same description up to but not including "process ID". This was the result of restarting PSE10 several times. Information above is from the last restart.

FAGLFLEXA and BKPF data missing

Hi ,
End user unable to print the accounting document since data missing in FAGLFLEXA and BKPF table for the ledger type OL.
Transaction code "/SOL/FI_CN_VOUCHER", I guess it is an program issue we have to include the OL .
Please advise how to fix this issue.
Regards,
Udaya Kumar.K

Dear Udaya,
Check whether scenario has been transported to the system properly. If you have scenarion missing in the configuration, you will have data inconsistencies. It is depending upon your Document Spiliting conditin and no of parallel ledger etc.
If all customization are correct, then I don't know if it is usefull for you or not but it may be correct all data.
FAGL_DELETE_RELOAD_LEDGERS, run it in SA38 and everything will be all right.
There are other programs you can find usefull RGURECGLFLEX and FAGL_DELETE_DOCUMENT.
I hope it helps you.
With regards,
Uttam Maity

Find multiple missing files

I've spent the last few days trying to clean up my music collection (get rid of duplicates, consolidate everything, etc) and I now have a lot of missing files in my iTunes library. I was able to retrieve my complete library from my iPhone via PhoneTrans, but reading them into the library only gives me new duplicates (most of which lack any information, since PhoneTrans doesn't seem to grab any of the data other than the title). A little bit of Googling tells me that previous versions of iTunes had an option to find other missing songs based on the location of another one, but that doesn't seem to be in existence anymore. Any advice?

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
Consolidating and deduplicating by hand are also likely to have caused problems. If you still have duplicates in the library along with matching tracks that can be located then see Re: How to delete multiple duplicates of multiple songs?
If you have to resort to trying to pull back the library from your device see Recover your iTunes library from your iPod or iOS device.
Note that files in .wav form don't carry a tag. Most recovery processes will only get a track name derived from the filename if .wav files are reimported to the library.
tt2

BP data missing in some Lead transactions of MSA.(Data Inconsistency)

The BP information(Company name & Contact person) is NOT getting displayed on some of the Lead transactions on MSA. Although,it is displayed on most of the Lead transaction on MSA.
1) If I download say 20 Leads from CRM Server to MSA, the BP data is missing only on some 4-5 Leads. All other Lead have the correct BP information.
2) And, if 2 Leads are downloaded for the same BP, 1 Lead has the BP data whereas the other does NOT have it.
-This shows that the BP data is available in MSA database but it is NOT displayed on the MSA tileset.
-Also, we are able to pull the BP (Activity Partner & Contact person) under the respective BP search on MSA.
We checked the Client SQL database table and all the data (Master & Transaction) are present there.
However, when we check the tables for the Lead where BP is missing, the BP information is NOT available. i.e, the BP information is not available at the table level for that particular transaction.
In spite of all the Master data available in database level.
Can anyone please help us with this?
Thanks in advance.
Jags.

Hi there,
Yes.We are able to reproduce it as and when we want the "error samples".
One more finding, we DON'T see this issue on DEV setup. It is working fine.
However, when we try to upload the same flat file containing 24 Leads on Testing environment, invariably we get the "BP data missing" at least for 3 Lead transactions.
This is the case on Production environment as well.
We are already contemplating on OSS ticket.
Thanks for your help.
Jags.

How to find number missing

Hi,
How to find the missing number(not number range) .Is there any functional module is there for missing nos.
ex: i have nos. from 50 to 100 & no.79 is missed.
For this issue if any functional module is there pls let me Know.
Thanks & Regards
Venkat

Not sure about a function, but you could create your own function and use this logic.
REPORT zrich_0001.
TYPES: BEGIN OF ttab,
       number TYPE i,
       END OF ttab.
DATA: itab TYPE TABLE OF ttab.
DATA: wa LIKE LINE OF itab.
DATA: tmp LIKE LINE OF itab.
DATA: diff TYPE i.
DATA: rows TYPE i.
DATA: low_number TYPE i.
DATA: high_number TYPE i.
DATA: tmp_number TYPE i.
* Build an internal table with all the numbers
wa-number = 50. APPEND wa TO itab.
DO 50 TIMES.
wa-number = wa-number + 1. APPEND wa TO itab.
ENDDO.
* Create some missing numbers in the table
DELETE itab WHERE number = 63.
DELETE itab WHERE number = 64.
DELETE itab WHERE number = 65.
DELETE itab WHERE number = 79.
sort itab ASCENDING .
* find the low value.
clear wa.
READ TABLE itab INTO wa INDEX 1.
IF sy-subrc = 0.
low_number = wa-number.
ENDIF.
* Get the high value
rows = LINES( itab ).
clear wa.
READ TABLE itab INTO wa INDEX rows.
IF sy-subrc = 0.
high_number = wa-number.
ENDIF.
* Now find the missing numbers.
tmp_number = low_number.
DO.
IF tmp_number = high_number.
    EXIT.
ENDIF.
READ TABLE itab INTO wa with key number = tmp_number.
IF sy-subrc <> 0.
    WRITE:/ tmp_number.
ENDIF.
tmp_number = tmp_number + 1.
ENDDO.
Regards,
Rich Heilman

Lacie finder.dat and resource.frk files

Sorry if this is not the place to post.
Recently I used my new lacie firewire drive to transfer files from my G4 to a PC laptop. Now the files on the Lacie (when I work on the G4) are missing their icons and their tag .ai, .m4a etc. and I can't open many of them. Some files will open via right click and choose the program.
In every folder there is now a finder.dat file and resource.frk
I read in a recent post about the finder.dat. And now understand the relationship to the PC. Although, this has never happened on my older Lacie drive.
Can I fix what I've done to my files? What is the Graphics Converter?
I do have all recent updates for the Lacie applied.

FINDER.DAT and RESOURCE.FRK would be the product of AppleDouble Format in other words files transfered from the HFS filesystem to a foreign filesystem. FINDER.DAT can be translated as finderinfo which can contain creator codes and file types. Most OS X application can do fine without this info. RESOURCE.FRK is the resource fork. Both the finderinfo and resource fork have been split from the data fork- I see no use for this info since I can't think of a way to rejoin this info with the data fork. Wait and see if someone has another opinion before removing the files.

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Unable to find data source

Hi All,
we have installed standard cubes and ODS from Business content. Now we want to load standard ODS but we are unable to identify standard data source.
0CPR_C03 - Infocube.
We have already checked in BI Content and help.sap.com but it doesnot display any data source name.
Kindly give input to find data source.
Regards,
Sathvik

Hi,
Now you got some clue, i.e. some datasource names supports the cube.So in that you need to analyze what feilds you want to and in which datasource you have all that feilds in that way you need to use the DS. For any other information you need to check in sap help sites, here I'm giving some tables in BW, so it will help you.
RSISOSMAP Mapping Between InfoSources and DataSources (=OLTP Sources)
RSOSFIELDMAP Mapping Between DataSource Fields and InfoObjects
RSTS Transfer Structure in SAP BW
ROOSGEN Generated Objects for a DataSource
ROOSOURCE Header Table for SAP BW DataSources (SAP Source System/BW System)
RODELTAM BW Delta Procedure (SAP Source System)
RSOLTPSOURCE Replication Table for DataSources in BW
Thanks
Reddy

FInder Dates missing

Similar Messages

Maybe you are looking for