Finder extremely slow, trash takes ages and some USB-devices don't work
My MacPro is lightning fast when booted without extensions (shift down), but when I boot normally some apps work fine, but the Eye TV usb receiver won't work.
Emptying trash might take hours for 1 or 2 files.
Copying files from one HDD to another takes ages
Finder is extremely slow (takes forever to show contents of a mounted DMG).
installing software will often not work.
awkwardly enough FCP seems to work fine while simple use of the finder is nerve wrecking.
iTunes won't launch.
I've tried adding extra memory (got screwed into buying 4GB at extorniate price at the Apple retaier), cleaning up cache, flushing pram, removing Norton AV, removing all old Adobe apps, all tools I never use...
I tried booting without USB and firewire devices.
now the pc HDD connected show full size empty disks where one cannot write...
I already learned to live with the fact that Snow leopard makes my HP Designjet and all my labelprinters from Brother useless, but I need to work. Does someone have an idea on how to get Snow Laggard to become a Snow Leopard?
See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.
Similar Messages
-
Some USB devices don't work with MacBook (Unibody)
Hi everybody,
I've just bought a new MacBook and I'm experiencing a few problems with some USB devices like USB memory sticks and USB hard disks.
Whenever I plug in one of these devices I undergo one of the following:
- Copy operations get stuck
- Time Machine backups get stuck
- Finder freezes or crashes
- Disk Utility freezes or crashes
Can someone report the same behavior?
Thanks for any hint
PS: this is what Console reports
+11/24/08 22:50:01 kernel USBF: 22875.305 AppleUSBEHCI[0x6d6e800]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 2, EP: 1)+Hello together,
i also have seen some USB problems with the new MacBook and just checked a bit deeper.
I have no problems with my USB sticks, the USB hard drive, the MIDI interface - most stuff works. But there still is some special stuff i use for my embedded projects.
One is the USBprog, a universal AVR-based USB device with open source firmware, where i used a programmer emulation. I patched the firmware a bit, as it had problems with the OSX USB stack (was something with OSX sending a NACK and the device doing nothing on this - which is perfectly legal according to the specs). After this patch, the programmer works fine with my Mac Pro (Early 2008). But if i connect it to the MacBook, i get error messages in system.log about this device.
The funny thing - if i connect it via an USB hub to the MacBook, it seems to work fine.
The other device is an Olimex AT91SAM7 development board, which also works fine on the Mac Pro as a CDC device (/dev/cu.usbmodem*), but doesn't on the MacBook. Can be seen with cu - the first connection works fine, the second connection hangs the MacBook, you can log off, but it is impossible to shut it down cleanly. This problem can't even be removed by using a hub. On the Mac Pro, i can use several separate cu sessions on this device without any problems.
Comparing the hardware reveals that the Mac Pro uses an Intel USB chipset and the MacBook used an nVidia chipset. So there is a difference, and this difference might also reflect in which driver is used by the OS for the USB subsystem. The Mac Pro uses OHCI/EHCI, the MacBook used UHCI/EHCI. So the Hardware differs definitely, USB might really get through different software parts.
Besides this, the USBprog problem is a violation of the specs by Apple, so the USB stack in general needs some improvement. The nVidia USB drivers also might need further improvement due to the added problems of the MacBook.
I know, this doesn't help too much, but at least it could be a hint on what goes wrong. I hope, Apple will fix this with one of the next Leopard updates.
...Michael -
[Usb] Weird dmesg output and some usb devices work randomly [solved]
I tried multiples times my devices, new cables, all items works well alone, never add this trouble before ...
[ 1.920414] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[ 2.032096] usb 1-1.4: configuration #1 chosen from 1 choice
[ 2.032527] hub 1-1.4:1.0: USB hub found
[ 2.032905] hub 1-1.4:1.0: 4 ports detected
[ 2.130125] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.265398] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 2.269525] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.273636] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.277906] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.283054] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.283064] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 2.287140] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 2.291265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.502404] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 2.670413] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 2.705384] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 2.709519] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.713646] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.717752] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.721891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.721901] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 2.726035] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 2.754275] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 2.758389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.762532] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.766642] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.770766] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.770776] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 2.774902] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 2.779016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.783154] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.787272] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.791388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.795502] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.795508] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 2.815380] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 2.819502] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 2.823639] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.031147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 3.325397] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 3.329500] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.333629] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.337764] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.341894] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.341902] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 3.346006] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 3.350128] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.354265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.358395] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.362504] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 3.572405] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 3.834148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 4.041147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 4.225161] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 4.604135] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 4.811158] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 5.124148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 5.128260] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.341030] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 5.524159] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 5.528261] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.532402] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.536510] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.540635] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.540641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 5.544776] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 5.548923] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.553034] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.557136] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.762414] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 5.944142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 5.948279] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.952386] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.956511] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.960635] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 5.960641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 5.964779] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 5.968888] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.181040] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 6.394141] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 6.398258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.402387] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.406514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.410636] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.410642] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 6.434138] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 6.438262] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.442386] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.446507] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.450637] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.450643] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 6.454765] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 6.458886] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.671163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 6.854135] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 6.858258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.862388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.866513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.870653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.870663] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 6.874764] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 6.878889] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.883014] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 6.887139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.101019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 7.284137] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 7.288259] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.292389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.296513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.501164] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 7.684161] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 7.688266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.692390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.696514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 7.901042] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 8.084157] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.088266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.092384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.096527] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.100639] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.100645] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.104776] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.124156] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.128265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.132389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.136515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.140640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.140646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.144766] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.148891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.153016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.157139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.161263] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.165390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.165396] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.169511] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.173640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.177765] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.181891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.186041] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.190139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.190145] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.190528] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 8.444154] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.448266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.452388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.456516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.460640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.460646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.464765] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.484142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.488266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.492405] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.496516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.500641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.500646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.504781] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.524141] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.528265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.532388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.536515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.540641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.540647] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.544778] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.564142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.568266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.572385] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.576517] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.580641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.580646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.584762] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.584772] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 8.764160] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 8.768266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.772392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.776516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.780640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.780646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.784766] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.788888] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.793017] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.797141] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.801266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.805392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.805397] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 8.809528] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 8.813644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 8.817767] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.031041] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 9.211034] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 9.464146] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 9.468267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.472390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.476528] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.480642] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.480648] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 9.484767] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 9.488893] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.493016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.497142] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 9.711044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 9.891164] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 10.231292] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 10.493788] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 10.740912] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 11.004160] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 11.008270] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 11.012394] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 11.016519] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 11.020644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 11.020650] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 11.024784] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 11.028894] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 11.231046] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 11.411038] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 11.770918] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 12.025397] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 12.029516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.033645] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.037771] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.041897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.041903] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 12.046021] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 12.050147] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.054271] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.058397] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.062536] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.066647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.066653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 12.070785] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 12.074897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.079021] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.083142] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.087271] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.091390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.091396] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 12.114146] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 12.118284] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.122396] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.126521] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.130647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.130653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 12.134772] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 12.134783] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 12.138908] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 12.143017] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 12.534153] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 12.538267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.542392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.546522] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.550647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.550653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 12.554786] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 12.558897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.563046] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 12.771044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 13.054145] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 13.058272] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 13.062397] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 13.066522] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 13.271044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 13.484653] Adding 2000888k swap on /dev/sda1. Priority:-1 extents:1 across:2000888k
[ 13.547246] udev: starting version 151
[ 13.565404] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 13.569523] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 13.573656] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 13.648934] lp: driver loaded but no devices found
[ 13.791014] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 14.081019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 14.324129] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 14.324473] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 14.335417] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 14.339843] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 14.339861] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.339885] atl1c 0000:01:00.0: setting latency timer to 64
[ 14.343912] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 14.392534] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 14.452279] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 14.552406] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 14.633372] [drm] Initialized drm 1.1.0 20060810
[ 14.711101] Linux video capture interface: v2.00
[ 14.754166] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 14.756184] type=1505 audit(1322362365.376:2): operation="profile_load" pid=547 name="/sbin/dhclient3"
[ 14.756987] type=1505 audit(1322362365.376:3): operation="profile_load" pid=547 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.757478] type=1505 audit(1322362365.376:4): operation="profile_load" pid=547 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.761330] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 14.763344] cfg80211: Calling CRDA to update world regulatory domain
[ 14.765513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 14.769663] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 14.784905] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 14.793038] cfg80211: World regulatory domain updated:
[ 14.793048] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.793059] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.793068] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.793077] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.793085] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.793094] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.795609] type=1505 audit(1322362365.416:5): operation="profile_load" pid=560 name="/usr/sbin/ntpd"
[ 14.882025] uvcvideo: Found UVC 1.00 device WebCam (0402:7675)
[ 14.887671] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6
[ 14.888353] usbcore: registered new interface driver uvcvideo
[ 14.889105] USB Video Class driver (v0.1.0)
[ 14.940790] acer-wmi: Unable to detect available WMID devices
[ 14.990212] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 15.054215] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.054230] i915 0000:00:02.0: setting latency timer to 64
[ 15.092402] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.092425] ath9k 0000:02:00.0: setting latency timer to 64
[ 15.101858] alloc irq_desc for 27 on node -1
[ 15.101868] alloc kstat_irqs on node -1
[ 15.101887] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 15.101905] [drm] set up 7M of stolen space
[ 15.142616] ath: EEPROM regdomain: 0x65
[ 15.142624] ath: EEPROM indicates we should expect a direct regpair map
[ 15.142634] ath: Country alpha2 being used: 00
[ 15.142640] ath: Regpair used: 0x65
[ 15.208295] [drm] initialized overlay support
[ 15.233223] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.234991] Registered led device: ath9k-phy0::radio
[ 15.235042] Registered led device: ath9k-phy0::assoc
[ 15.235103] Registered led device: ath9k-phy0::tx
[ 15.235151] Registered led device: ath9k-phy0::rx
[ 15.235182] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc90010ba0000, irq=17
[ 15.246026] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 15.250140] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.254267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.258379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.262608] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.262696] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 15.266767] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 15.270901] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.275040] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.284136] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.360881] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 15.557431] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 15.572272] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 15.661452] fb0: inteldrmfb frame buffer device
[ 15.661460] registered panic notifier
[ 15.763678] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 15.790306] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 15.857619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 15.861307] acpi device:24: registered as cooling_device3
[ 15.862608] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 15.862804] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 15.862873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.863199] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.863264] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.869348] vga16fb: initializing
[ 15.869358] vga16fb: mapped to 0xffff8800000a0000
[ 15.869370] vga16fb: not registering due to another framebuffer present
[ 15.991336] [drm] Big FIFO is enabled
[ 15.991362] [drm] Big FIFO is enabled
[ 15.997989] Console: switching to colour frame buffer device 128x37
[ 16.027811] hda_codec: ALC272: BIOS auto-probing.
[ 16.029372] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 16.200901] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 16.384155] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 16.388287] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.392400] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.396536] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.400653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.400787] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 16.405041] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 16.409289] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.413406] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.417535] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.421664] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.425780] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.426408] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 16.444174] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 16.449027] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.453907] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.458795] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.671050] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 16.895409] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 16.900421] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.905530] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 16.910540] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 17.121051] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 17.305540] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 17.309552] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 17.313643] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 17.318033] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 17.531030] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 17.537507] type=1505 audit(1322362368.154:6): operation="profile_load" pid=768 name="/usr/share/gdm/guest-session/Xsession"
[ 17.556042] type=1505 audit(1322362368.174:7): operation="profile_replace" pid=769 name="/sbin/dhclient3"
[ 17.556829] type=1505 audit(1322362368.174:8): operation="profile_replace" pid=769 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.557298] type=1505 audit(1322362368.174:9): operation="profile_replace" pid=769 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.590216] type=1505 audit(1322362368.214:10): operation="profile_load" pid=774 name="/usr/lib/cups/backend/cups-pdf"
[ 17.591206] type=1505 audit(1322362368.214:11): operation="profile_load" pid=774 name="/usr/sbin/cupsd"
[ 17.717821] alloc irq_desc for 28 on node -1
[ 17.717832] alloc kstat_irqs on node -1
[ 17.717869] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 17.718163] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 17.719432] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.791653] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.932273] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 18.254175] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 18.258278] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 18.262411] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 18.273277] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[ 18.474912] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 18.551727] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 18.551739] vboxdrv: Successfully done.
[ 18.551745] vboxdrv: Found 2 processor cores.
[ 18.552078] VBoxDrv: dbg - g_abExecMemory=ffffffffa0334a20
[ 18.552126] vboxdrv: fAsync=0 offMin=0x15e offMax=0x9e2
[ 18.553753] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 18.553763] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 18.685461] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 18.853354] ppdev: user-space parallel port driver
[ 18.891055] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 19.195420] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 19.199562] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.203665] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.207800] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.211931] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.211943] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 19.216037] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 19.220168] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.224300] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.228412] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.232535] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.415152] CPU0 attaching NULL sched-domain.
[ 19.415171] CPU1 attaching NULL sched-domain.
[ 19.442301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 19.470525] CPU0 attaching sched-domain:
[ 19.470540] domain 0: span 0-1 level SIBLING
[ 19.470553] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 19.470619] domain 1: span 0-1 level MC
[ 19.470632] groups: 0-1 (cpu_power = 1178)
[ 19.470656] CPU1 attaching sched-domain:
[ 19.470668] domain 0: span 0-1 level SIBLING
[ 19.470679] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 19.470699] domain 1: span 0-1 level MC
[ 19.470708] groups: 0-1 (cpu_power = 1178)
[ 19.624177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 19.628289] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 19.832297] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 20.014177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 20.018295] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.022419] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.026534] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.030667] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.030679] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 20.034788] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 20.038909] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.043038] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.047158] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.051314] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.055411] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.055422] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 20.059533] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 20.063670] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.067784] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.071914] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.282421] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 20.473171] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 20.740898] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 20.985407] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 20.989518] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.993650] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 20.997778] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.001910] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.001925] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.006017] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 21.010153] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.014282] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.018392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.022521] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.026651] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.026665] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.054148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 21.058276] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.062407] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.066534] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.070667] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.070681] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.074780] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 21.095406] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 21.099529] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.103656] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.107777] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.322153] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 21.504148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 21.508287] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.711020] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 21.896037] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 21.900695] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.904767] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.908896] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.913021] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.913033] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.917139] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 21.921349] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.925406] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.929563] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.933645] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.939095] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.939108] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.964186] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 21.968298] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.972413] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.976565] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.980640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 21.980652] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 21.984770] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 21.988920] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 22.202393] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 22.382762] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 22.774151] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 22.778267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 22.991156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 23.172147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 23.399069] CPU0 attaching NULL sched-domain.
[ 23.399084] CPU1 attaching NULL sched-domain.
[ 23.450299] CPU0 attaching sched-domain:
[ 23.450310] domain 0: span 0-1 level SIBLING
[ 23.450319] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 23.450386] domain 1: span 0-1 level MC
[ 23.450395] groups: 0-1 (cpu_power = 1178)
[ 23.450412] CPU1 attaching sched-domain:
[ 23.450420] domain 0: span 0-1 level SIBLING
[ 23.450427] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 23.450445] domain 1: span 0-1 level MC
[ 23.450452] groups: 0-1 (cpu_power = 1178)
[ 23.554128] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 23.558830] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.562880] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.567006] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.781149] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 23.964268] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 23.968382] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.972515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.976641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.980766] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 23.980778] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 23.984896] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 24.004297] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 24.008422] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.012529] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.016644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.222380] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 24.405642] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 24.409756] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.413896] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.418003] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.422137] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.422154] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 24.427164] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 24.431327] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.435379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.439514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.443762] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.651151] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 24.834138] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 24.838258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 24.842392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.051144] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 25.234134] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 25.238248] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.242385] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.246507] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.250630] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.250641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 25.254752] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 25.258879] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.471299] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 25.651010] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 25.854132] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 25.858251] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.862384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.866500] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.870625] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.870636] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 25.874748] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 25.894130] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 25.898252] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 25.902379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 26.111134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 26.364124] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 26.571128] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 26.774122] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 26.778246] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 26.782376] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 26.786497] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 26.790621] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 26.790632] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 26.794742] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
[ 26.814125] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 27.021129] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 27.204247] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 27.208367] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 27.422506] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 27.642224] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 27.894242] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 27.898361] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 28.101247] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 28.284231] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 28.288352] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 28.292491] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 28.296611] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 28.502497] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 28.681247] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 28.922372] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 29.171120] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 29.432353] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 29.691106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 29.941230] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 30.202348] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 30.450975] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 30.714724] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 30.974221] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 31.181103] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 31.360970] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 31.732478] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 31.992647] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 32.250964] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 32.501211] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 32.760963] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 33.011084] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 33.271208] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 33.532460] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 33.783079] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 34.042829] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 34.291076] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 34.550949] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 34.811073] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 35.062196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 35.321069] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 35.574188] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 35.578304] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 35.781196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 35.965440] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 36.171196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 36.350937] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 36.601060] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 36.854182] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 37.061188] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 37.244177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 37.451185] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 37.630930] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 37.881053] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 38.131052] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 38.392298] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 38.651427] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 38.902424] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 39.161052] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 39.415422] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 39.419528] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 39.622417] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 39.802407] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 40.181163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 40.444773] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 40.692279] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 40.955411] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 40.959540] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 40.963653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 41.172279] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 41.352269] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 41.725408] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 41.729531] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 41.941022] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 42.122136] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 42.502127] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 42.743002] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 43.002261] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 43.252253] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 43.521765] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 43.772418] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 44.030863] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 44.282506] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 44.582250] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 44.792248] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 45.053275] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 45.305374] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 45.512683] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 45.692626] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 46.072229] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 46.334003] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 46.584095] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 46.842495] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 47.092239] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 47.352219] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 47.611113] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 47.884591] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 48.121232] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 48.370978] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 48.642356] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 48.891730] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 49.141104] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 49.401106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 49.654104] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 49.911350] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 50.171347] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 50.424218] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 50.685470] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 50.690037] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 50.902345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 51.083968] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 51.451345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 51.704344] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 51.912337] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 52.091342] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 52.476082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 52.736313] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 52.941208] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 53.122330] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 53.495445] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 53.499572] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 53.711202] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 53.893448] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 54.262319] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 54.522318] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 54.772186] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 55.035438] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 55.039547] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.043688] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.047810] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.051938] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.051950] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 55.075436] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 55.079558] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.291067] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 55.544188] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 55.548296] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 55.752311] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 55.935432] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 55.939542] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 56.151185] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 56.332431] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 56.574180] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 56.782431] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 56.961301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 57.331174] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 57.594172] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 57.598292] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 57.602433] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 57.812293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 57.991171] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 58.362542] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 58.611167] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 58.871162] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 59.131161] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 59.381033] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 59.641159] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 59.891156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 60.156036] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 60.160168] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 60.371156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 60.551027] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 60.922399] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 61.171147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 61.431145] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 61.694130] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 61.901148] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 62.081015] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 62.451137] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 62.711252] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 62.964252] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 62.968371] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 62.972506] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 62.976621] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 62.980744] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 62.980754] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 63.004128] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 63.211895] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 63.392882] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 63.735373] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 63.941133] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 64.121126] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 64.504126] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 64.762367] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 65.011121] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 65.270994] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 65.531117] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 65.782235] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 66.040989] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 66.294233] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 66.298349] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 66.501242] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 66.680985] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 67.061107] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 67.320980] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 67.571604] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 67.835476] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 68.042480] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 68.224228] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 68.602474] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 68.851096] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 69.112723] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 69.374212] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 69.581221] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 69.761087] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 70.131212] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 70.391084] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 70.651343] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 70.900957] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 71.161079] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 71.410954] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 71.674215] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 71.931075] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 72.180947] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 72.442322] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 72.691071] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 72.954578] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 73.214219] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 73.421065] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 73.605435] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 73.609585] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 73.613693] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 73.617800] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 73.832437] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 74.011386] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 74.231060] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 74.492307] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 74.743553] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 75.002573] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 75.252300] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 75.511051] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 75.772294] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 76.021047] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 76.280921] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 76.530919] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 76.793795] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 77.053670] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 77.301163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 77.561289] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 77.811287] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 78.071158] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 78.335403] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 78.541162] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 78.724655] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 79.091777] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 79.351288] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 79.612267] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 79.862528] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 80.124145] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 80.371306] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 80.631019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 80.891285] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 81.141138] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 81.401287] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 81.651640] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 81.914257] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 81.918370] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 81.922510] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 82.131293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 82.314252] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 82.521134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 82.701127] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 82.931002] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 83.191124] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 83.454502] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 83.701121] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 83.964239] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 84.171248] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 84.351116] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 84.731114] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 84.981112] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 85.244232] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 85.451115] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 85.630983] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 86.010980] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 86.262357] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 86.524603] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 86.771095] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 87.034222] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 87.241227] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 87.422350] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 87.801225] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 88.061098] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 88.312346] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 88.573346] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 88.821341] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 89.080963] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 89.331211] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 89.590957] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 89.851075] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 90.103083] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 90.364198] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 90.571082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 90.755448] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 90.961203] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 91.143823] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 91.384192] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 91.591199] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 91.775434] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 91.981197] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 92.166067] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 92.414191] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 92.621210] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 92.801323] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 93.172438] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 93.431189] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 93.692309] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 93.943552] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 94.200927] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 94.450923] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 94.710922] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 94.972293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 95.221044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 95.481678] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 95.733789] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 95.991667] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 96.251305] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 96.504167] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 96.508276] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 96.721039] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 96.901296] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 97.271159] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 97.534149] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 97.741284] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 97.924032] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 98.294277] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 98.298384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 98.511329] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 98.691150] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 99.061304] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 99.321397] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 99.572256] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 99.832267] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 100.091134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 100.341139] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 100.601391] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 100.854010] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 101.111747] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 101.365381] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 101.369511] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 101.582382] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 101.762383] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 102.131255] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 102.394258] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 102.398379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 102.402498] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 102.612376] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 102.792726] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 103.161133] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 103.411301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 103.685109] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 103.922485] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 104.191109] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 104.445830] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 104.692230] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 104.951106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 105.204217] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 105.208351] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 105.421080] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 105.602349] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 105.972486] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 106.235499] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 106.239611] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 106.243736] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 106.452335] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 106.635459] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 106.639593] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 106.643720] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 106.861082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 107.045500] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 107.252602] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 107.435490] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 107.439594] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 107.658475] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 107.844976] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 108.022596] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 108.282345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 108.545484] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 108.549584] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
[ 108.762596] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 108.945458] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 109.151201] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 109.333948] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 109.562581] hub 1-1.4:1.0: unable to enumerate USB device on port 4
[ 109.815469] hub 1-1.4:1.0: hub_port_status failed (err = -71)
[ 110.022326] hub 1-1.4:1.Anyone?
-
Myspace and some Youtube videos don't work
This problem must've been posted here before. I am using the
newest version of flash and have java-scripting turned on but when
I try to watch videos on Myspace and a few of the newer ones on
Youtube i get this message: Hello, you either have JavaScript
turned off or an old version of Adobe's Flash Player. Get the
latest Flash player.
If the the video is embedded on another page I can see it
fine. I have tried all the full downloads at softwarepatch.com etc.
Has anyone figured out why this happens on some PCs?Ok guys, I think I have figured out a way to watch the vids
with the ad-blocker turned on! (it worked for me!)
First open-up the Norton Security Centre then click on:
options > Web Content > Add Site > then type 'youtube.com'
and/or 'vids.myspace.com'.
Now click on that website (you've just inputted) and click
on: Ad Blocking > Add > then type 'ad' and click permit. If
that doesn't work try typing in: '
http://youtube-' or '
http://myspace-' then clicking
'permit'.
If you stil can't see em try doing what I did and checking
out the logs in Norton by clicking on 'Statistics' in the security
centre and then 'View Logs'. You should be able to see the html
string that Norton is blocking from youtube and then tell it to
allow it, using the steps mentioned above. -
my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is laggingmy new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging -
CS5 Extremely Slow to Open, Save and Print
We have recently installed InDesign CS5. We are experiencing extreme slowness when open, saving and printing documents. We have installed on Windows XP Service Pack 3. I have upgrade to 7.0.3 to no avail. Has anyone else experienced this? If so, were you able to resolve it?
pooh071567 wrote:
I can create and save new CS5 files fine both to the desktop and the network. I tried copying our existing files to the desktop to see if there was a network issue. It is also extremely slow to open from the desktop. I'm beginning to wonder if it is our documents. They were created in CS3. I tested one that was 2 pages of text with a few graphics. It took a considerable amout of time to open. I made some edits to it and saved it to the desktop. I would have thought that saving it in the new CS5 format would have improved the slowness. It did not.
I was on a support call with Adobe yesterday for 2 1/2 hours. To say it was extremely frustrating is an understatement. They have asked me to re-download the install, uninstall and reinstall. I did not re-download, but did uninstall and reinstall from the EXE we have. Slowness is still an issue. I'm inquiring regarding our antivirus, however, I don't think that is the issue. We were able to open files in CS3 just fine. It seems to be since the upgrade to CS5 that we are having issues.
Whenever you contact anybody's tech support:
* Get the name of the tech, and any other identifying info
* Get a case number
* Explain your question/problem briefly; begin by saying, "I'm going to explain my problem briefly. Before we spend lots of time on it, I'll ask you if you have expertise in this particular area. I don't mean to be rude, but if you don't have sufficient expertise here, we'll both waste our time. If this isn't OK with you, I understand; we all have strong and less-strong areas. If you don't have the expertise, please give me the name of someone who has the the greatest amount of the expertise needed to solve the problem, and then transfer me to that person. If you can't do this, please give me your supervisor or manager's name, and transfer me to that person. Would you like me to state my problem briefly, now, so that we can go ahead?"
* If you have the slightest inkling that you're being told to do wasteful things like re-download, uninstall and reinstall, ask the tech, "Is this a known fix for my problem? If it's not, why are you asking me to do this?" (Some techs suggest these steps to get you off the line and move on to another call, either because their call clearance rate is slipping, and that's how many are paid. Others suggest them because they don't have the expertise to solve the problem.)
* If you're transferred to a manager or supervisor, summarize why you asked for him or her. Then, ask the manager to transfer you to the highest-skilled person for the problem you'll now explain briefly. If the manager/supervisor balks, ask for the highest-level person in the department, or the division. IOW, ESCALATE (use that word, when asking to change people.)
It's not the customer's job to teach customer service folks to serve customers, but we're the best ones to teach them now NOT to do it.
Now, if you don't have the expertise to do these things, please give me the name of your superior, so I can escalate this matter, and then connect me to that person!
Seriously,
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
a) Am having problems emptying my trash.
Takes forever and then the contents don't delete.
What must i do? My trash box is full and it's affecting my operating system?
b) Does the items in trash slow down my operating system?Abu,
There may be something going on with your ownership if the Trash if the files aren't deleting. OK, let's try this:
Launch Terminal (found in Applications>Utilities folder). At the $ prompt, type (or paste):
ls -la
and hit Return. In the right hand column, you should see .Trash listed and to the left, you will see the "owners" name (in my case, clintondyches). If the owners name shows as root then the following will fix the problem. At the same $ prompt enter
sudo chown yourusername .Trash
(replace yourusername with your actual user name - such as mine being clintondyches).
At the prompt $ again, type or paste:
ls -la
If this was successful, you should see yourusername instead of root.
You should be in business now. You should have ownership of .Trash and be able to empty your Trash, drag items to it and empty it, etc.
Call back and let me know...
Clinton -
my notes were coming in double so I deleted on and then they all deleted and I can't find them in trash or anywhere and there was a lot of important information on them. Any idea where they might be -----very very frustrated
Welcome to the Apple Community.
Use your Time Machine (or other) back up to return to the point before you deleted them. -
My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!
I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off? -
I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.
**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone. -
My
Toshiba 1TB 2.5 inch External StorE Art HDD doesn't show up in Finder.
The light is on and it hums. Has always worked perfectly and now this. Using it on a 2010 Mac with Snow Leopard 10.6.8tried another cable (from a camera) with no joy. However after turning off TM and searching for the EHD and not finding it, I revisited Disk Utility and can 'see' it there. The bad news is that it says,
Verifying volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Toshiba 1TB”
Checking Journaled HFS Plus volume.
Invalid extent entry
The volume could not be verified completely.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files." -
my iphone 4 cant find wifi. i have reseted wifi and iphone, but it still isnt working! it just stopped yesterday. please help!
You could try syncing the contacts with yahoo or google contacts, then sync them to the iPhone. Or, export the contacts and then import them into one of the aforementioned servicse, or iCloud, then sync to the phone.
-
HP 15-d041tu Notebook Some USB Stuff is not working?
I have bought this Notebook computer which is model HP 15-D041TU which has a Celeron N2810 / 2GB / 500GB HDD and having trouble with it ever since i bought it. First there were issues with finding correct drivers for the sytem which took me nearly 3 days to solve. The drivers that was provided in the website didn't work with the system plus automatic drivers detection software does not detect the system. Now i got everything installed and running perfectly well with windows 7 64BIT Version. Another problem arises,
My iPhone doesn't work, it tries to connects but breaks in the middle with blimb blimb sound coming repetitiously until USB Device gives a error
Next problem is i use to have Virus mouse ( Some cheap chinese bran Je-Way or something ). It works perfectly with all computers except for this one, driver doesn't install on this.
What's happening with this computer? is there something i don't know about USB 3.0 and windows 7? some old devices doesn't work? my iPhone works perfectly with all other computers with same cable and same itunes and same windows 7 64.Hello nofacemonster, welcome to the HP Forums.
I see that you're having an issue with a mouse and iPhone connect them to the usb 3.0 port on your notebook. I will try to help you with this.
The first thing I'd like to provide you is this document: Troubleshooting USB Connections (Windows 8).
The issue you may be having, is with backwards compatibility. The document may be able to help you with that. Some older device just may not work with usb 3.0 though. It does depend on the device.
In regards to the iPhone, this post on the Apple Forums should answer your questions: Re: Simple. Does the iPhone 5s have usb 3?
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Structured Frame 7.2, Acrobat 8.1.2
Some of my Frame xrefs work as links in PDF, some don't. All xref formats use elem rather than para, the jumps work in FrameMaker. These are the first PDFs we've created after moving to structured Frame. Any suggestions? Help please!Teresa,
This sounds like a long-time known bug in structured Frame which I think may carry over into unstructured Frame, I'm not sure. The bug is that some PDF hyperlinks don't work if you don't include the target in the PDF bookmarks. For example, if your xrefs target a Heading3 element, but you don't include Heading3 elements in your bookmarks, Frame may fail to create named destinations for those elements and your links won't work.
There is a workaround to this bug in my shareware XRef Wizard plugin, available at www.weststreetconsulting.com. It might be able to help... look in the documentation for "named destinations."
Russ -
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore
Maybe you are looking for
-
In the current project my exception handling implementation is as follows : Exception Handling Layer wise : DL layer : catch (Exception ex) bool rethrow = ExceptionPolicy.HandleException(ex, "Ui Policy"); if (rethrow) throw; BL Layer catch (Exception
-
Hi all, In my report i need to show one chart view. I'm having one prompt. There the user is asked to select a no. for eg. say 10. and a date eg. 10-JAN-09. So my report should show the data from 10-JAN-09 and go backwards to 10 days. if he selects 5
-
Interactive Reporting Migration
Hi, Could any one Please give some details on Interactive Reporting Migration from lower version to higher version(9x) and what are the lower versions. Thanks in advance.
-
hey guys! Im building a page and i have a lide show. I used XML code and the slide show is flash. When i preview it, it works but when I upload it to the site it doesnt work. here is were its located, click on the studio pic for the window with the f
-
UNCAUGHT_EXCEPTION CX_SOCM_NOT_IMPLEMENTED
Hi all, i'm getting Dump error in Solution manager 7.0 while performing maintenance optimizer. Runtime Errors UNCAUGHT_EXCEPTION Except. CX_SOCM_NOT_IMPLEMENTED What happened? The exception 'CX_SOCM_NOT_IMPLEMENTED' was rai