Finding multiple characters with IndexOf.

I was wondering how I could find mutiple characters in a String using IndexOf, or anything else that might work.
An example would be wanting to find the first position of any vowel.
thanks in advance.

ok, heres some code. The whole point of this method is find the first occurence of a,e,i,o, or u. The greater cause is a PigLatin translator.
     public static String findFirstVowel(String input)
          int word;
          word = input.indexOf('a'); //this is where I think the problem lies
          if(word > 0)
               System.out.println(word) //just for debugging purposes
               return word + "";
          return "";
     }//findFirstVowel()

Similar Messages

Finding last characters with grep

I am lousy with grep and didn't find the solution with google, so let's ask here (help me out, please...)
I need to find last 7 characters of a paragraph and assign a character style "no break" to it. I know everything else, but what's the string to find the 7 last characters (incl. white spaces, digits and letters).
Thanks in advance.

try searching for .{7}$

Create a flat file with multiple characters for enclosures

Hello,
we use OWB 11g2 (11.2.02).
Now we try to create a flat file with multiple characters for enclosures. The manual wrote:
"Enclosures (Left and Right): Some delimited files contain enclosures that denote text strings within a field. If the file contains enclosures, enter an enclosure character in the text box or select one from the list. The list displays commonenclosures. However, you may enter any character. The default for both the left and right enclosure is the double quotation mark ("). You can specify multiple characters and hexadecimal characters as field enclosures."
But it will not work. The OWB use the first character from the left enclosure definition as left enclosure and the second one as right enclosure !?!
Did anyone know this behavior? Is there a solution for this problem?
Thanks and regards
Norbert

HI Raghu,
Use the function module 'GUI_UPLOAD'.
In that you have to specify the field_separator value = 'X' in export section.
Regards,
S.C.K

Where i can find multiple confirm qty with multiple schedule line..

Hi Experts,
Is there any BAPI FM or FM for finding multiple schedule line confirmation with some of blocked.
Yusuf

not solved

Finding undisplayable characters in a field with a WHERE clause

Oracle_Rdb7 for_OpenVMS Release 7.0.1. I have a field in my table that has been loaded with data that contains "return/line feed" characters (I'm not sure of the ASCII hex representation) which can't be displayed and show up as "." on my screen. How can I code a WHERE clause that will find these characters, e.g., SELECT * FROM TABLE1 WHERE NAME CONTAINING <here is where I want to put the ASCII hex value for a "return/line feed" character>? Also, how could I get the actual ASCII hex code for these characters to display, e.g., "31" instead of "1"?

a 'return' is CHR(10) So you can:
select * from my_table where text_fld like '%'||CHR(10)||'%'

How to search for multiple values with Bex Prompts

Hi,
I would like to know if it is possible to search for multiple values at the same time with Bex Prompts instead of searching one value at a time (please see the screen shot below). I searched the forum couldn't find any relevant answers. please let me know how to achieve?
Thanks,
Charvi.

Hi Charvi,
You can use wild card search to ensure you get multiple similar values listed as search output.use * for multiple characters and ? for single character.
For Example, Ravi * would result you all employees with first name as Ravi
You can use various search formats such as * Ravi * and * Ravi and Ra?? etc.
Thanks
Mallik

Multiple characters in one slot of an ArrayList?

I am writing a method that extracts words from a string and returns an ArrayList with the given extracted words. I am not allowed to use the method split.
I have managed to get the characters of the input string into an array list, but I can't seem to get multiple characters into one slot of the list. Can you put multiple characters into one slot of an array list?
Here is the code for my method.
import java.util.*;
import java.io.*;
public class PS6
public static ArrayList<Object> extract_words(String string1)
   String s1 = string1;
   char space = ' ';
   int index = 0;
   ArrayList<Object> charArray = new ArrayList<Object>(s1.length());
   for (index = 0; index < s1.length(); index++)
     char current = s1.charAt(index);
     if(current != space)
       charArray.add(current);
   return charArray;
}If I leave it like this, when I write a test program to test this method, my output is:
java ExtractWordsTest
[N, o, w, i, s, t, h, e, t, i, m, e]
Not what I want. I want [Now, is, the, time]
I thought to fix this, I could modify part of the for loop as such
int position = 0;
     if(current != space)
       charArray.add(position, current);
    else
       position++;
     } thinking that this would add all characters to the same slot in the ArrayList until it found a space. If it found a space, it would advance the slot of the ArrayList and start adding characters to that slot until it found another space. It would do this until it reached the end of the string.
But with this code, the output of the test program is
java ExtractWordsTest
[e, m, i, t, e, h, t, s, i, w, o, N]
Am I going about this in the wrong way? Is it not possible to add multiple characters to one slot of an array list?

I've been trying to account for that. I figured that it wasn't giving me the last word because it never finds a final space, which is true. When in my test program, I make the test string "Now is the time " with that extra space, the out put is [Now, is, the, time].
The problem is I don't want to put in that extra space.
I've been trying to put in another else if statement, but I'm not trying things that are correct.
I've tried the above code with
else if (current == finalChar)
     { /*trying to get it to extract the last substring and add it to the array as the last element*/
       newString = s1.substring(s1.lastIndexOf(space), s1.length());
       stringArrayL.add(newString);
     }but even though the method compiles, it makes my test program go crazy and clearly does not work.
I've tried using || in various ways, specifically regarding the second else statement
else if (current == space || current = s1.charAt(s1.length()))
         stringArrayL.add(newString);
         newString = "";
       }but that, as well as other || parameters I have tried keeps spitting out
[Now, is, the]
The only way I've gotten it to give me all four is by putting that extra space in at the end of the test string, which I don't want to have to do.

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Finding multiple characters with IndexOf.

Similar Messages

Maybe you are looking for