Finding the context path or docBase in a backing bean - Howto

How should I go about finding the context path or docBase in a backing bean?
Is there anyway to get this from glassfish or jsf? GlassFish proudly displayed it on the Application Server > Applications > Web Applications > page. It puts it there with an EL for example:
${com.sun.aas.instanceRoot}/applications/j2ee-modules/jsf-witaCan and/or should I try to use it in a backing bean? i.e. can I rely on it to stay defined?
Or should I make a property which I can set for my backing work?

Is this what you want?
FacesContext.getCurrentInstance().getExternalContext().getContext()

Similar Messages

How to find the menu path ?

Hi all,
I have one doubt how do we find out the correct menupath if we know the t-code ?
for example, SE11 -DDIC
we can also obtain the same DDIC screen via menupath from SAP main screen.
if I know only t-code.how can i find out the menupath ?
thnks and rgds,
raghul

Hi Raghul,
You can go to the transaction search_sap_menu
for finding the menu path.
check this link:
http://www.sap-basis-abap.com/sapgeneral/system-path-and-transaction-code-mapping.htm
Hope this helps you.
Regards,
Chandra Sekhar

How to find the absolute path of file which store in KM foler ?

Hello everyone:
     We want to develop an ABAP program which can write files into KM folder directly.
     So I need to find the absolute path of file which store in KM folder first, then we can consider the develop solution.
     Is this issue possbile that an ABAP program write files into KM folder directly ?
     Is there anybody had done this job ?
Best Regards,
Jianguo Chen

Hi,
http://forum.java.sun.com/thread.jsp?forum=34&thread=36
612The methods in the above topic seem to be available when use a DOM parser..

Need Help in finding the Menu Path's for the below topics

Hi,
Where can i get the menu paths for the below topics in SAP syste. I have searched in the system,But couldnot find the Menu Path's for the below topics.Kindly help me in finding the configuration Path for the below...
1)Public tendering process
2)Grants Management
3)Tax & Revenue management
4)Public sector accounting --> Budget formulation, preparation, execution & Monitoring.
Thanks
Rajitha M

Hi,
Check for the relevant path in IMG in Public Sector Management. The prerequisites being configuration of Financial accounting
sub modules.
Best Regards,
Sadashivan

Finding the exact path of a file using a Java program

Can anyone tell me how to find the exact path of a file which is saved in a directory other than the one in which the main file is saved? I know there is a class called File which has many methods like isAbsolutePath() and isPath() but they return the path in which the main class is located

actually i m trying to write a program which will
take a name of a file or a directory from the console
and it should give the entire path of that file or
directory and this file need not be stored in the
path of the main class.....It can be stored in any
drives of my PC....Ok, then the console input needs to be an absolute path or a path relative to some given directory (usually the one from which the application is started). Java cannot magically guess absolute paths if you just provide a file name. E.g. if I'd use your program and would provide as input "build.xml", how should the program know which file by that name I mean (there are lots of build.xml files in different locations on my machine)?

Finding the shortest path

Hey guys,
Im working on a solution to this problem below is a program to allow a user to draw straight line paths. What i'd like to do is allow the user to select two points on the path he has drawn and find the shortest path among all the interesecting lines.....im going crazy thinking of a solution for this.....im thinking bout steeping down a notch and just try to find just any path first.
Will really appreciate any help.
Thnx in advance,
Vikhyat
import java.applet.*;*
*import java.awt.*;
import java.awt.event.*;*
*import javax.swing.*;
import java.awt.geom.*;
public class Lab11 extends Applet implements MouseListener, MouseMotionListener {
int x0, y0, x1, y1;
int mouseRelease=0;
GeneralPath path = new GeneralPath();
public Lab11()
addMouseListener(this);
addMouseMotionListener(this);
public void mouseDragged(MouseEvent e)
x1 = e.getX();
y1 = e.getY();
repaint();
public void mouseMoved(MouseEvent e) { }
public void mouseClicked(MouseEvent e) { }
public void mouseEntered(MouseEvent e) { }
public void mouseExited (MouseEvent e) { }
public void mousePressed(MouseEvent e) {
x0 = e.getX();
y0 = e.getY();
System.out.println("Mouse pressed at: (" +
x0 + ", " + y0 + ")" );
public void mouseReleased(MouseEvent e) {
x1 = e.getX();
y1 = e.getY();
System.out.println("Mouse released at: (" +
x1 + ", " + y1 + ")" );
mouseRelease = 1;
this.repaint();
public void paint(Graphics g)
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
//just for show not concerned with saving paths
if(mouseRelease==1)
path.moveTo(x0,y0);
path.lineTo(x1,y1);
mouseRelease = 0;
g2.setPaint(Color.RED);
g2.draw(path);
g.setColor(Color.BLACK);
g.drawLine(x0, y0, x1, y1);
public static void main(String[] argv)
JFrame f = new JFrame("Test");
f.getContentPane().add(new Lab11());
f.setSize(600,600);
f.setVisible(true);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}Pictorially this is what im trying to do:
User draws a path like so and selects two points as shown in blue
[http://i48.photobucket.com/albums/f236/theforrestgump/select.jpg]
The program should then proceed to highlighting the shortest path
[http://i48.photobucket.com/albums/f236/theforrestgump/sp.jpg]
Edited by: cannonball on Apr 1, 2008 7:58 PM

import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
public class ShortPath extends JPanel {
    Path2D.Double path;
    Path2D.Double shortPath = new Path2D.Double();
    Point p1 = new Point();
    Point p2 = new Point();
    final double PROXIMITY = 5.0;
    public ShortPath() {
        path = new Path2D.Double();
        path.moveTo(145,80);
        path.lineTo(125,170);
        path.lineTo(190,200);
        path.lineTo(240,340);
        path.lineTo(285,220);
        path.lineTo(145,80);
    protected void paintComponent(Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D)g;
        g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                            RenderingHints.VALUE_ANTIALIAS_ON);
        g2.setPaint(Color.blue);
        g2.draw(path);
        g2.setPaint(Color.green);
        g2.setStroke(new BasicStroke(2f));
        g2.draw(shortPath);
        g2.setPaint(Color.red);
        g2.fill(new Ellipse2D.Double(p1.x-2, p1.y-2, 4, 4));
        g2.setPaint(Color.orange);
        g2.fill(new Ellipse2D.Double(p2.x-2, p2.y-2, 4, 4));
    private void findShortPath() {
        if(!isPointOnLine(p1) || !isPointOnLine(p2)) {
            System.out.println("a point is not on the path");
            return;
        double d1 = getDistanceToPoint(p1);
        double d2 = getDistanceToPoint(p2);
        double pathLength = getDistanceToPoint(new Point());
        Point2D.Double start = new Point2D.Double();
        Point2D.Double end   = new Point2D.Double();
        if((d1 < d2 && d2 - d1 < pathLength - d2 + d1) ||
           (d1 > d2 && d1 - d2 > pathLength - d1 + d2)) {
            start.setLocation(p1);
            end.setLocation(p2);
        } else {
            start.setLocation(p2);
            end.setLocation(p1);
        generatePath(start, end);
    //                        145,80
    // leg distance = 92.2    125,170
    // leg distance = 71.6    190,200   163.8
    // leg distance = 148.7   240,340   312.5
    // leg distance = 128.2   285,220   440.7
    // leg distance = 198.0   145,80    638.7
    private double getDistanceToPoint(Point p) {
        PathIterator pit = path.getPathIterator(null);
        double[] coords = new double[2];
        double distance = 0;
        Point2D.Double start = new Point2D.Double();
        Point2D.Double end = new Point2D.Double();
        Line2D.Double line = new Line2D.Double();
        while(!pit.isDone()) {
            int type = pit.currentSegment(coords);
            switch(type) {
                case PathIterator.SEG_MOVETO:
                    start.setLocation(coords[0], coords[1]);
                    pit.next();
                    continue;
                case PathIterator.SEG_LINETO:
                    end.setLocation(coords[0], coords[1]);
            line.setLine(start, end);
            boolean onLine = line.ptSegDist(p) < PROXIMITY;
            if(onLine) { // point is on this line
                distance += start.distance(p);
                break;
            } else {
                distance += start.distance(end);
            start.setLocation(end);
            pit.next();
        return distance;
    private void generatePath(Point2D.Double first, Point2D.Double second) {
        Point2D.Double p = new Point2D.Double(first.x, first.y);
        Point2D.Double start = new Point2D.Double();
        Point2D.Double end = new Point2D.Double();
        Line2D.Double line = new Line2D.Double();
        boolean pathStarted = false;
        for(int j = 0; j < 2; j++) {
            PathIterator pit = path.getPathIterator(null);
            double[] coords = new double[2];
            while(!pit.isDone()) {
                int type = pit.currentSegment(coords);
                switch(type) {
                    case PathIterator.SEG_MOVETO:
                        start.setLocation(coords[0], coords[1]);
                        pit.next();
                        continue;
                    case PathIterator.SEG_LINETO:
                        end.setLocation(coords[0], coords[1]);
                        line.setLine(start, end);
                        boolean onLine = line.ptSegDist(p) < PROXIMITY;
                        if(onLine) {            // found point on line
                            Point2D.Double linePt = getClosestPoint(line, p);
                            Line2D.Double segment;
                            if(!pathStarted) { // found first point
                                                // both points on line
                                if(line.ptSegDist(second) < PROXIMITY) {
                                    Point2D.Double secPt =
                                        getClosestPoint(line, second);
                                    segment = new Line2D.Double(linePt, secPt);
                                    shortPath.append(segment, false);
                                    return;
                                } else {        // first point only
                                    segment = new Line2D.Double(linePt, end);
                                    shortPath.append(segment, false);
                                    p.setLocation(second);
                                    pathStarted = true;
                            } else {            // found second point
                                segment = new Line2D.Double(start, linePt);
                                shortPath.append(segment, false);
                                return;
                        } else if(pathStarted) {
                                                // add intermediate lines
                            Line2D.Double nextLine =
                                new Line2D.Double(start, end);
                            shortPath.append(nextLine, false);
                start.setLocation(end);
                pit.next();
    private Point2D.Double getClosestPoint(Line2D.Double line,
                                           Point2D.Double p) {
        double minDist = Double.MAX_VALUE;
        Point2D.Double closePt = new Point2D.Double();
        double dy = line.getY2() - line.getY1();
        double dx = line.getX2() - line.getX1();
        double theta = Math.atan2(dy, dx);
        double length = line.getP2().distance(line.getP1());
        int limit = (int)(length+.05);
        for(int j = 0; j < limit; j++) {
            double x = line.getX1() + j*Math.cos(theta);
            double y = line.getY1() + j*Math.sin(theta);
            double distance = p.distance(x, y);
            if(distance < minDist) {
                minDist = distance;
                closePt.setLocation(x, y);
        return closePt;
    private boolean isPointOnLine(Point p) {
        Point2D.Double start = new Point2D.Double();
        Point2D.Double end = new Point2D.Double();
        Line2D.Double line = new Line2D.Double();
        PathIterator pit = path.getPathIterator(null);
        double[] coords = new double[2];
        while(!pit.isDone()) {
            int type = pit.currentSegment(coords);
            switch(type) {
                case PathIterator.SEG_MOVETO:
                    start.setLocation(coords[0], coords[1]);
                    pit.next();
                    continue;
                case PathIterator.SEG_LINETO:
                    end.setLocation(coords[0], coords[1]);
                    line.setLine(start, end);
                    if(line.ptSegDist(p) < PROXIMITY) {
                        return true;
            start.setLocation(end);
            pit.next();
        return false;
    public static void main(String[] args) {
        ShortPath test = new ShortPath();
        test.addMouseListener(test.ml);
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.add(test);
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
    private MouseListener ml = new MouseAdapter() {
        boolean oneSet = false;
        public void mousePressed(MouseEvent e) {
            Point p = e.getPoint();
            if(oneSet) {
                p2 = p;
                findShortPath();
            } else {
                p1 = p;
                shortPath.reset();
            oneSet = !oneSet;
            repaint();
}

Find the installation Path of the current running VM on Windows

Hello,
I have a java class started by webstart.
In this class I would like to find the absolute path of the current running vm? This is important to me because I need to start an exe file (using ProcessBuilder) and hand it the path of the java VM,
For example I could try something like this:
private static File findJDK() throws Exception {
String s = System.getProperty("java.home");
File myJRE = new File(s);
if (new File(myJRE, "bin/javac.exe").isFile()) {
return myJRE;
File parent = myJRE.getParentFile();
if (new File(parent, "bin/javac.exe").isFile()) {
return parent;
for (String pathel : System.getenv("PATH").split(File.pathSeparator)) {
File bindir = new File(pathel);
if (new File(bindir, "javac.exe").isFile()) {
return bindir.getParentFile();
return myJRE;
But I would like the above code to be more fool proof!
For example the "java.home" could be wrongly set.
Since java is allready running I would have hopped that I could query the Runtime. But there seems to be no method providing the running java VM path?
I also tried looking at the jnlp services API but no luck.
I would be also interested find the lastest java VM on the client Windows machine....
Many greetings
john

http://docs.oracle.com/javase/7/docs/api/java/lang/System.html#getProperties()
bye
TPD

How can I find the all path available for a MPLS VPN in SP network

How can I find the all path available for a MPLS VPN in SP network between PE to PE and CE to CE?

Hi There
If we need to find all the available paths for a remote CE from a local PE it will depend upon whether its a RR or non-RR design. If the MP-iBGP deisgn is non-RR the below vrf specific command
sh ip bgp vpnv4 vrf "vrf_name" will show us the MP-iBGP RT for that particular VPN. It will show us the next hop. Checking the route for same in the Global RT will show us the path(s) available for same ( load-balancing considered) .Then we can do a trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback to get the physical Hops involved.
However if the design is RR-based there might be complications involved when the RR is in the forwarding path ie we have NHS being set to RR-MP-iBGP loopback and the trace using the Local PE MP-iBGP loopback as source to remote PE's MP-iBGP loopback will get us the physical Hops involved.
If we have redundant RRs being used with NHS being set then the output of sh ip bgp vpnv4 vrf "vrf_name" will show us two different available paths for the remote CE destination but just one being used.
RR-based design with no NHS being used will always to cater to single path for the remote CE detsination.
So in any case the actual path used for the remote CE connectivity would be a single unless we are using load-balancing.
Hope this helps you a bit on your requirement
Thanks & Regards
Vaibhava Varma

After changing the context path, felix console, I can not checkout content via vlt.

Hi everyone,
I have the following issue. After changing the context path, via felix console, I can not checkout the content via vlt. Before that, I could checkout without any problems.
I am using CQ5.5, CRX2.3, context path: /Test
That is what I am trying:
vlt -v --credentials admin:admin co http://localhost:23310/Test/server/crx.default
Connecting via JCR remoting to http://localhost:23310/Test/server
[WARN ] Authentication required to access repository descriptors
[ERROR] checkout: com.day.jcr.vault.vlt.VltException: Unable to mount filesystem
caused by: javax.jcr.ItemNotFoundException: Not Found
caused by: org.apache.jackrabbit.webdav.DavException: Not Found
Other versions I tried:
vlt -v --credentials admin:admin co http://localhost:23310/crx
vlt --credentials admin:admin co http://localhost:23310/Test/server
vlt --credentials admin:admin co http://localhost:23310/Test
vlt --credentials admin:admin co http://localhost:23310/Test/crx
To verify if I could connect to the instance properly I started CRXDE
and try to connect to "http://localhost:23310/Test"
After click the ok button I got that error:
No file system is defined for scheme: jcr
Part of the .log file (.crxde):
eclipse.buildId=unknown
java.version=1.6.0_37
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=de_DE
Framework arguments: -keyring /Users/peterwimsey/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86_64 -keyring /Users/peterwimsey/.eclipse_keyr
ing -showlocation
!ENTRY org.eclipse.core.resources 2 10035 2012-11-25 19:01:19.268
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to
recover changes.
!ENTRY org.eclipse.osgi 4 0 2012-11-25 19:04:14.363
!MESSAGE Application error
!STACK 1
java.lang.reflect.InvocationTargetException
        at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121)
        at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau
ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav
a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
        at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55)
        at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50)
        at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65)
        at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107)
        at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350)
        at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100)
        at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6)
Any tips or hints are welcome.
In the case you need more information, just leave a note.
Thanks in advance for your help.
Best regards,
Peter

The VLT works fine with the above URL change but How to fix "CRXDE" Initialization error if a context path is defined?
I have a context path defined /Test and when I am trying to login to CRXDE with URL as http://localhost:4502/Test, I am getting below Initialization Error.
Any workaround as Which URL should work while logging to repository (with context path) using CRXDE 1.0.1
eclipse.buildId=unknown java.version=1.6.0_06 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US Command-line arguments: -os win32 -ws win32 -arch x86 !ENTRY org.eclipse.osgi 4 0 2013-04-25 17:50:23.802 !MESSAGE Application error !STACK 1 java.lang.reflect.InvocationTargetException at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:121) at com.day.cq.ide.CQDEApplication.start(CQDEApplication.java:62) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Caused by: org.eclipse.core.runtime.CoreException: No file system is defined for scheme: jcr
at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:55) at org.eclipse.core.internal.filesystem.Policy.error(Policy.java:50) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getFileSystem(InternalFileSys temCore.java:65) at org.eclipse.core.internal.filesystem.InternalFileSystemCore.getStore(InternalFileSystemCo re.java:107) at org.eclipse.core.filesystem.EFS.getStore(EFS.java:350) at com.day.cq.ide.fs.JCRFileSystemPlugin.registerExtensions(JCRFileSystemPlugin.java:100) at com.day.cq.ide.init.SetupWorkspaceOperation.initWorkspace(SetupWorkspaceOperation.java:16 6) at com.day.cq.ide.init.SetupWorkspaceOperation.execute(SetupWorkspaceOperation.java:119) at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:106) at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800) at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:118) ... 13 more Root exception:
Thanks.

How to find the tomcat path from registry?

Hi,
How can I find the tomcat path from registry?
please tell me.
Thanks
Gaurav Agrawal

gauravjlj wrote:
listen,
I'm about to create a exe which will do these things.....
1. first install java
2. install tomcat
3. install mysql
4. deploy my web application with out use of tomcat manager
first three steps I have done with the help of installer maker. let assume that my tomcat has been installed. but now please tell me how can I deploy my web application.
that's why I need the tomcat path.
please tell me.Well, if you've just installed Tomcat you do know where it is so what's the problem? Why not, in fact, include your application in the tomcat directories as you install them? That's all there is to installing tomcat, installing the directories, setting %JAVA_HOME% and (possibly) running the service.bat file.

Oracle OAF Find the Document Path Using JDR Tables or JDR_UTILS API

Hi,
I found duplicate records in JDR_PATHS table for a Particular OAF Page. I need to find the complete path of these documents,so that i can delete the one which i don't want
using the jdr_utils.deletedocument.
Appreciate it if anyone can advise on how to identify the paths for the a page so that I can delete the document I do not want. Any other ideas to delete the extra document would be welcome.
Thanks
Sai

Sai,
Duplicate records in JDR_PATHS does not mean they are duplicate records, page names may be same.
But the hierarchy of the page is different, don't be in a hurry to delete the document.
try to find the information from this :
Learn Oracle Applications With Me: MDS in Oracle Applications, OAF
Regards
Sridhar

I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

Hey b.elyse
Check out the following article that will assist with removing iTunes. Make sure to follow the order to ensure that it removed properly.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thanks for using Apple Support Communities.
Regards,
-Norm G.

ERR: This request does not match the context path for any installed web app

We are currently using weblogic 6.1 SP6 and facing "Error 404 Page not found" error very oftenly.
          This error is first encounter while uploading file at File folder, although does not happen at every upload, but was quite consistent always at upload file stage. At this moment, this error can occur at any stage, when ever we run any heavy process on the server (like importing large amount of data or pushing the data to different ERP - system by using custom integration. The system works fine after restarting.
          Please help me out to resolve this issue as this very critcal for our production environment.
          ERROR:
          ####<May 12, 2005 4:17:12 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:15 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:16 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:17 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          ####<May 12, 2005 4:17:18 PM SGT> <Error> <HTTP> <MatrixTransit> <myserver> <ExecuteThread: '13' for queue: 'default'> <> <> <101147> <HttpServer(7105637,null default ctx,myserver) found no context for "/ematrix/emxLogin.jsp". This request does not match the context path for any installed web applications and there is no default web application configured.>
          THANKS
          Rohit

Rohit
          How did you resolve the issue?
          I am facing the same.
          Thanks
          Amit

Get the context path with jspx

How can I get the context path using jspx?
with jsp I get using scriptlet
<%=request.getContextPath()%>but it didn't validate with xhtml
thanks

I'm really unfamiliar with JSP Documents and I don't know if nesting the tags would be valid. Why don't you use EL in that case?
${pageContext.request.contextPath} will print out the value you need.
P.S. In case it just prints out as is without being evaluated, take a look at these:
http://faq.javaranch.com/java/ElOrJstlNotWorkingAsExpected
http://faq.javaranch.com/java/JstlTagLibDefinitions
http://faq.javaranch.com/java/SetupJstlForJsp2
http://faq.javaranch.com/java/ServletsWebXml
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

Function that finds the absolute path of a file

Hi,
I'm creating an application using the SDL framework.
The following code gives me the absolute path for the file "caisse.jpg", which is located in my application bundle. Then, I can use the value of "cstrURL" to load the image with IMG_Load(cstrURL);
#import <CoreFoundation/CoreFoundation.h>
int main(int argc, char *argv[])
CFURLRef url = CFBundleCopyResourceURL( CFBundleGetMainBundle(),
CFSTR("caisse"),
CFSTR("jpg"), //extension du fichier
NULL );
const char* cstrURL = CFStringGetCStringPtr(
CFURLCopyFileSystemPath(url,kCFURLPOSIXPathStyle),
CFStringGetSystemEncoding()
printf("URL: %s", cstrURL);
return EXIT_SUCCESS;
But I have many files to load for my application. I tried to create a function that would take as parameter informations about the image, and then automatically find the absolute path of this image.
( void imgPath(char name[], char ext[], char destination[] ---> name = "image", ext = "jpg", destination is a variable in which the function puts the absolute path of the file)
How can I do that? What bugs me is the use of the CFSTR macro in the code I have...
Thank you very much
FRANKY

The CFSTR macro can only use a constant string as parameter, not a variable one.
You can use instead CFStringCreateWithCString if the parameter is a C String (char *).
Additionaly, I think the input parameters of your imgPath function must be of char* type, not char. And the output parameter char** (but it would be easier to know with the function source code).

Finding the context path or docBase in a backing bean - Howto

Similar Messages

Maybe you are looking for