Finding the Message Category from Message Type ( TXN - NOTIF_CREATE )

Dear All,
According to my requirement , I need to find the Message Category , from the Message Type.
As for Example :
SLF1 is the Message Category for Message Type SLFN .
I have got a F.M "SUP_STSUP_READ_PROCESS_TYPE" which gives the Message Type , now i need the Corresponding
Message Category.
We can also see the Message Type in Transaction : NOTIF_CREATE.
Please Help.
Thanking You All.

Similar Messages

Error: Finding the document specification by message type ... failed.

I'm writing my first BizTalk application base on the EAI Tutorial and getting the error
Finding the document specification by message type "ProductCatalogInformation" failed.
My schema has been deployed and is as follows.
<?xml version="1.0" encoding="utf-16" ?>
- <xs:schema xmlns="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:b="http-colon-backslash-baclslash-schemas.microsoft.com/BizTalk/2003" targetNamespace="http-colon-backslash-baclslash-MondaySchemas.Schema1" xmlns:xs="http-colon-backslash-baclslash-www.w3.org/2001/XMLSchema">
- <xs:element name="ProductCatalogInformation">
- <xs:complexType>
- <xs:sequence>
<xs:element name="GlobalDocumentFunctionCode" type="xs:string" />
<xs:element name="CatalogTypeCode" type="xs:string" />
<xs:element name="GlobalActionCode" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
My XML is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ProductCatalogInformation>
    <GlobalDocumentFunctionCode>Request</GlobalDocumentFunctionCode>
    <CatalogTypeCode>Partial</CatalogTypeCode>
    <GlobalActionCode>Revise</GlobalActionCode>
</ProductCatalogInformation>
The error I get is
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler" Receive
Port: "MondaySolutionRequestPort" URI: "C:\BizTalk\Receive\*.xml" Reason: Finding the document specification by message type "ProductCatalogInformation" failed. Verify the schema deployed properly.
Suggestions please?
Is there a link where I can download the completed solution to the BizTalk Server Tutorial 1 Enterprise Application Integration ?
Thanks in advance..

1) Check the GAC and ensure that the schema is there, be sure the version numbers are the same.
2) You should also restart the host instance and try again.
To check that the schema exists and is deployed properly open the query analyser on your BizTalk Server and
use the BizTalkMgmtDb and run the query below. In the where clause place the correct target namespace and root node name which is being reported in the error log from the Event Viewer.
Select msgtype, assemblyid, clr_namespace, clr_assemblyname
from bt_documentspec
where msgtype = targetnamespace#rootnode;
3) Check the sample XML, its without namespace. Generate instance from the schema and then try.
Should be
<ProductCatalogInformation xmlns="http://MondaySchemas.Schema1"><\ProductCatalogInformation>
What
you need to do to fix "There was a failure executing the receive pipeline… failed to load. Verify the schema for this document specification is deployed and is in the Global Assembly Cache" Error after deploying BizTalk Solution
You can get everything you need to learn about BizTalk here at Learning
about BizTalk Server has never been easier now with the TechNet Wiki
Here is the solution: BizTalk
Server Tutorials--Tutorial 1: Enterprise Application Integration
Video at Biztalk
Server 2010: Enterprise Application Integration (EAI) Video Tutorials
Rachit

How to find the number of pending messages in a Queue

All,
Is there a way to find the number of pending messages in a given QUEUE to be picked by the queue reader?
My reader is not picking all the messages as many sent by my writer, i am not sure where they are getting lost? or if the JMS implementation is buffering them and does not flush until it does not have enough to throw out ( which any way does not make sense!!).
Please help.
Chandra

You're right in thinking that the behaviour you describe looks wrong.
Take a look at the QueueBrowser interface which can be used to inspect a queue. You get one using QueueSession.createBrowser(Queue). The QueueBrowser allows you to scan a queue without consuming the messages. However note that the state of the queue may change while you're observing it through the QueueBrowser so what you see might not always be a 100% accurate representation of the queue at any given time.
Other things to check:
- message selectors - are you setting a message selector on your queue receiver which is resulting in not all of the messages 'matching'.
- expired messages - are you setting a time-to-live on the messages that you publish.
Hope this helps,
David Ingham
http://www.arjuna.com

Find the transaction for an message - M8 - 155

Hi All
Is there is any option available to find the transaction code by messages
Exxample
message id is - M8
Message no is - 155
I found this message triggering in Program name - LMG11U05
Can u help me to find the transaction code of this message triggers.
Cheers
Priyanka

Hi Deekshitha,
NO.
Messages and transaction are not related at all. Transactions are 'entry points' for processing. Usually a transaction code is connected to a program an a screen. Starting there, any functions, programs, methods or transactions can be called. The called objects can do the same.
A message can be called directly in the program (This is what you found in function group MG11) or dynamically, selected via control tables or other methods.
You could check the function name of LMG11U05 and request a where-used-list. Then check transaction table TSTC for the programs found in the where-used-list. If you are lucky, it solves your question - at least partially. Because the message may be called elsewhere, too.
If not solved, please describe the situation in detail.
Regards,
Clemens

Finding the related field for "Leave Type" from the BI content in HR modul

Hi good after-noon!!
Can any one help me out in finding the related field for "Leave Type" from the BI content in HR module?
Regards,
Suman.

Hi Suman ,
U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
Regards
vamsi

HT3529 My iPod doesn't deliver the messages sent from Messages, what do I do?

My iPod doesn't deliver the messages sent from Messages, what do I do? I've tried everything, from restoring it to simply restarting it.

You cannot update your ipod from the ipod itself. This is only possible once you have ios 5.
You update it the you always have. Open itunes, connect ipod. It will prompt you to update, if an update is available.
If you have the 1st gen ipod touch, then you have the latest upate: 3.1.3

Finding the smallest value from an array

Hi there :)
I started learning Java a few days ago and have now run into my first problem :p
I am using Netbeans on Mac OS X.
I need to find the smallest value from an array. So far I've had no luck. Any suggestions would be fantastic.
The code so far:
* Math Problems
* Created on May 4, 2007, 10:54 AM
* PROJECT 1: - IN PROGRESS
* Create a program that allows you to create an integer array of 18 elements with the following values
* 3, 2, 4, 5, 6, 4, 5, 7, 3, 2, 3, 4, 7, 1, 2, 0, 0, 0
* - The program computes the sum of elements 0 to 14 and stores it in element 15                              // COMPLETED
* - The program computes the average and stores it in element 16                                              // COMPLETED
* - The program finds the smallest value from the array and stores it in element 17
* PROJECT 2: - TO DO
* Write a program that accepts from the command line and prints them out. Then use a for loop to print
* the next 13 numbers in the sequence where each number is the sum of the previous two. FOR EXAMPLE:
* - input>java prob2 1 3
* - output>1 3 4 7 11 18 29 47 76 123 322 521 843 1364
* PROJECT 3: - TO DO
* Write a program that accepts from the command line two numbers in the range from 1 to 40. It then
* compares these numbers against a single dimension array of five integer elements ranging in value
* from 1 to 40. The program displays the message BINGO if the two inputted values are found in the array
* element. FOR EXAMPLE:
* - input>java prob3 3 29
* - output>Your first number was 3
* -        Your second number was 29
* -        Its Bingo! // This message if 3 and 29 are found in the array
* -        Bokya!      // This message if 3 and 29 are not found in the array
* -        The array was 7 5 25 5 19 30
* PROJECT 3 EXTENSION: - OPTIONAL
* Generate the array of 5 unique integers using random numbers
package mathproblems;
* @author Mohammad Ali
public class Main {
    /** Creates a new instance of Main */
    public Main() {
     * @param args the command line arguments
    public static void main(String[] args) {
        int A[]={3,2,4,5,6,4,5,7,3,2,3,4,7,1,2,0,0,0};
        int O = A.length - 3;
        int B = A[0] + A[1] + A[2] + A[3] + A[4] + A[5] + A[6] + A[7] + A[8] + A[9] + A[10] + A[11] + A[12] + A[13] + A[14];
        A[15] = B; // Stores the sum of the integers in A[15]
        int C = B / O;
        A[16] = C; // Computes and stores the average in A[16]
        int D = 101;
            if (A[0] < A[1]) { D = A[0]; }
            else { D = A[1]; }
            if (A[1] < A[2]) { D = A[1]; }
            else { D = A[2]; }
        System.out.println("There are " + O + " numbers in the Array");
        System.out.println("Those numbers add up to " + B + ".");
        System.out.println("The average of those numbers is " + C + ".");
        System.out.println("The smallest value in the array is " + D + ".");
}The code is incomplete, but it works so far. The problem is I know there must be an easier way. SAVE ME :)

OK :)
Just thought I should show you the output as to help anyone else with the same problem:
* Math Problems
* Created on May 4, 2007, 10:54 AM
* PROJECT 1: - IN PROGRESS
* Create a program that allows you to create an integer array of 18 elements with the following values
* 3, 2, 4, 5, 6, 4, 5, 7, 3, 2, 3, 4, 7, 1, 2, 0, 0, 0
* - The program computes the sum of elements 0 to 14 and stores it in element 15                              // COMPLETED
* - The program computes the average and stores it in element 16                                              // COMPLETED
* - The program finds the smallest value from the array and stores it in element 17                           // COMPLETED
* PROJECT 2: - TO DO
* Write a program that accepts from the command line and prints them out. Then use a for loop to print
* the next 13 numbers in the sequence where each number is the sum of the previous two. FOR EXAMPLE:
* - input>java prob2 1 3
* - output>1 3 4 7 11 18 29 47 76 123 322 521 843 1364
* PROJECT 3: - TO DO
* Write a program that accepts from the command line two numbers in the range from 1 to 40. It then
* compares these numbers against a single dimension array of five integer elements ranging in value
* from 1 to 40. The program displays the message BINGO if the two inputted values are found in the array
* element. FOR EXAMPLE:
* - input>java prob3 3 29
* - output>Your first number was 3
* -        Your second number was 29
* -        Its Bingo! // This message if 3 and 29 are found in the array
* -        Bokya!      // This message if 3 and 29 are not found in the array
* -        The array was 7 5 25 5 19 30
* PROJECT 3 EXTENSION: - OPTIONAL
* Generate the array of 5 unique integers using random numbers
package mathproblems;
* @author Mohammad Ali
import java.util.Arrays;
public class Main {
    /** Creates a new instance of Main */
    public Main() {
     * @param args the command line arguments
     public static void main(String[] args) {
              int A[]={3,2,4,5,6,4,5,7,3,2,3,4,7,1,2,0,0,0};
          Arrays.sort(A);
          System.out.println("The smallest value in the array is " + A[0] + ".");
          int num = A.length;
          System.out.println("There are " + num + " values in the Array.");
          int sum = 0;
          for (int i = 0; i < A.length; i++) {
               sum+=A;
          System.out.println("Those numbers add up to " + sum + ".");
          double d = (double)sum/num;
          System.out.println("The average value of those numbers is " + d + ".");
What Iearned:
1) How to create for loops properly
2) How to import java.util.Arrays ( =D )
3) How to get a more accurate average using double instead of int
4) This forum is the best and has very helpful people 24/7 ( =D)
Thanks Again,
Mo.

How to find the form name from VA02 T.code

how to find the form name from VA02 T.code

Hi Rajyam,
I guess you are looking out for the formname which prints sales related documents.
If this is what you want,then go to the T-code NACE and select the option K1Sales activities and click on the Output Types button on the top.The new window has all the types of Output types listed.Select the most appropriate and double click on the Processing routines button in the left side screen.
The new window lists the program names and the forms associated with that output type.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Retrive Message ID from MESSAGE ARCHIVE in XI

Hello Experts,
   Can any one tell me how to retrieve or get Message Id from Message Archive in xi. I have gone through the sdn about the Message Archive in xi. I can see the messages in Archive, but i want to get the message id.
So Kindly help me in this regard.
Thanks in advance..
Arjun

Hi
Just try at   SXMB_MONI   ->> MONITORING>
Archived XML Messages (Search Using Archive)   or Archived XML Messages (Search Using ID)
Thanks
Abhishek

I can't find the Layout Category in Insert Panel???

How do I find it? I'm a beginner so I'm kind of new to Dreamweaver. I'm trying to follow a tutorial but I can't find the layout category to "Draw AP Div."

APDivs have been removed from DWCC.
It looks like you are trying to use a tutorial that was designed for a previous version of DW. You can still use position:absolute in your css to create the same kinds of containers as the old APDiv item, you just have to add it in manually.
APDivs (<div> tags with position:absolute in their css) were never designed to be used for the layout of an entire site (no matter what the marketing guys at Adobe said), they do have their uses which are valid and necessary, but primary layout is not one of them. 90%+ of the time that position:absolute is used in a site, static positioning (default) with floats, margins and padding would have been a better choice.
I would suggest getting a handle on html and css before you run tutorials for DW. Dreamweaver really requires you understand the basics of web design to get the most out of it. Try out the html and css tutorials at http://www.w3schools.com as a decent starting point.

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it. I want to come back to the previosu version. why is it so complicated. Why can I not find the instruction strait from apple? This is the worst possible upgrade ever.

I have upgrade ios 6 to ios7 on my iphone 5. I do NOT like it at all. I want to come back to the previous version. why is it so complicated? Why can I not find the instruction strait from apple? This is the worst possible upgrade ever. It make me think of when ericsson got sold to Sony....drastic PC change.
I would like to have simple instruction on how to downgrade.
It feel like a change that I did not ask for , ok I push the upgrade buttom, but really this is the worst update aver!
HELP!

iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

HT201514 i can't see the time capsule from airport utilities. i did follow "From the Apple menu, choose System Preferences. Choose View Time Machine. Set Time Machine to On if it is off. .....but i couldn't find the time capsule from airport utility.....

i did follow "From the Apple menu, choose System Preferences. Choose View > Time Machine. Set Time Machine to On if it is off "
. .....but i couldn't find the time capsule from airport utility..... why?

Are you using a new 802.11ac Time Capsule - the "tall" one - and are you still using Mac OS X 10.6.8?
You need OS X 10.7.5 "Lion" or later, or an iOS device, to configure an 802.11ac Time Capsule:
http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf
See page 12.

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

Where to find the document category in oracle purchasing for existing attachments?

Where to find the document category in oracle purchasing for existing attachments and also how to create a new category?

Hi Sanjay,
We are looking to add the below 3 marked document categories to Purchasing.
But here the application is for order management, how can we use them for purchasing?

Finding the Message Category from Message Type ( TXN - NOTIF_CREATE )

Similar Messages

Maybe you are looking for