Firefox error when opening application

Recently installed latest firefox 3.6.3. Had other issues going on with my computer so am unsure exactly what triggered this event while fixing other issues (checking for virus/malware, updating windows xp). Tried reinstalling but issue still present.
When opening firefox, error message below appears.
Error Message: The instruction at "0x7c884204 referenced memory at "0xffffffff". The memory could not be "read".
Weird thing is, as I have firefox on my quick launch bar, when I double click it, attempting to open the application twice, it works, opening 2 firefox windows with no error. but when firefox is closed and I attempt to open just once, error message above appears.
== This happened ==
Every time Firefox opened
== fixing computer of viruses and malware

If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See [[Troubleshooting extensions and themes]]

Similar Messages

Keep getting application Manager missing or damaged error when opening application

Application missing or damaged error when opening application.
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Just plain frustrated not getting this software to work.

What version of Premiere Elements is involved?
Premiere 12
And, on what computer operating system is it installed?
Windows 8
What are you doing when you get this message about the Adobe Application Manager?
Opening the application (Premiere)
Have you tried in install the Adobe Application Manager from the following link?
for Windows
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Yes
               Tried CC cleaner
               Tried uninstalling and reinstalling
               Tried Short file name
               Tried AAM patch
               Tried installing Creative Cloud
     Thank you for the assistance.

Error when opening application in BAB

Hi all,
I copied the standard opportunity view ACT_LEAN to ZACT_LEAN. When I open the view ACT_LEAN in BAB it opens but the custom view ZACT_LEAN is not opening. The follwong error is displayed.
An error occurred in the BSP application
The following information is available about the error:
Name Value
error-class CX_SY_REF_IS_INITIAL
error-text Dereferencing of the NULL reference.
occurredinprogram(include) CL_CRM_BSP_IL=================CP(CL_CRM_BSP_IL=================CM00Y)
occurredinline 22
Any help with this?
thanks in advance,
Paul.

Hi,
you can do a consistency check for your view. This may provide you with more information.
Best regards
Adrian

Error when opening application developed in jdev11.1.1.5.0 in jdev 11.1.2.0

Dear All,
I have developed an application in jdev11.1.1.5.0 and i am just trying to run it in jdev 11.1.2.0.0, first of all it migrated all files sucessfully to its own new format(it was done automatically).
Now next when i try to run my application it gives me following error and application fails to run i.e it doesnot even goes ahead of compilation means it gives error in compilation.
Error: An unreported error occurred in Appc. No errors were reported, but the tool returned a failure result code: 1.
Warning: <Sep 28, 2011 9:56:56 AM IST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
Warning: There are 1 nested errors:
Warning: weblogic.servlet.internal.dd.compliance.ComplianceException: There is no servlet definition for the servlet-name "SaveAnnotations" specified in the filter element "adfBindings".
Warning: at weblogic.servlet.internal.dd.compliance.BaseComplianceChecker.addDescriptorError(BaseComplianceChecker.java:76)
Warning: at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.checkFilterMapping(FilterComplianceChecker.java:109)
Warning: at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.check(FilterComplianceChecker.java:55)
Warning: at weblogic.servlet.internal.dd.compliance.ComplianceUtils.checkCompliance(ComplianceUtils.java:48)
Warning: at weblogic.servlet.jsp.JspcInvoker.checkCompliance(JspcInvoker.java:145)
Warning: at weblogic.servlet.jsp.JspcInvoker.compile(JspcInvoker.java:198)
Warning: at weblogic.application.compiler.AppcUtils.compileWAR(AppcUtils.java:376)
Warning: at weblogic.application.compiler.WARModule.compile(WARModule.java:245)
Warning: at weblogic.application.compiler.flow.SingleModuleCompileFlow.proecessModule(SingleModuleCompileFlow.java:18)
Warning: at weblogic.application.compiler.flow.SingleModuleFlow.compile(SingleModuleFlow.java:36)
Warning: at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
Warning: at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Warning: at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
Warning: at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)
Warning: at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:29)
Warning: at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:112)
Warning: at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:37)
Warning: at weblogic.application.compiler.Appc.runBody(Appc.java:203)
Warning: at weblogic.utils.compiler.Tool.run(Tool.java:158)
Warning: at weblogic.utils.compiler.Tool.run(Tool.java:115)
Warning: at weblogic.application.compiler.Appc.main(Appc.java:262)
Warning: at weblogic.appc.main(appc.java:14)Thanks & Regards,
Santosh

So what was the problem? How did you resolve it?
--Chris

Error when opening applications

I have been having some problems with my system. when I try to open up any application I get this pop-up stating that the app. cannot be open and I get this number at the bottom:
-10810
i tried repairing permissions and doing a disk repair. yet this did not solve the problem. I have to shut down and reboot to be able to use the applications.
anyone knows what is causing this?

You may be able to repair this with the 10.4.6 Stand Alone Combo Updater.
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions before and after update from /applications/utilities/disk utility.
-mj
[email protected]

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Error when opening User and Group Preferences

After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...

Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar

Error when opening Crystal Reports

Hi
I'm getting an error when opening Crysta R. from SAP 2007. Crystal version is 2008 and the error is something like this: The title of the wirndow is: Microsoft .NET Framework. Message: Exception not controlled in application. If you click continue the applicaction will avoid the error...etc.
Any suggestions?

Have you installed the 1.1, 2.0 and 3.5 Framework?
Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
Thank you
Don

Error when opening iWeb 09

After using iWeb 09 since it was released, I now get this error when opening the app.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Cloud 9.webtheme/Spanish.lproj/Podcast.webtemplate.”
I have tried opening from and external back up hard drive and also use Time Machine to replace the iWeb on my internal hard drive.
What's next?

Hi there. I think I am having a similar problem. I was looking at some files in iWeb, but I don't believe I changed this one. I changed one of the "playtime" theme files, but then I changed it back. Anyway, I did look at the Modern Frame theme files but I didn't change them because I use them for a couple of my sites, and I was afraid to change anything. Maybe I did by accident? Anyway, here is the error I received.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Modern Frame.webtheme/da.lproj/About Me.webtemplate.”
I am unable to open iWeb at all. That'll teach me.
Thanks!

Firefox crashes when opening "Extras Add-ons"

Firefox crashes when opening "Extras>Add-ons" (German user interface - I don't know what the according menu points are labeled in English).
The crash seems to be so severe that no crash ID is created. On every restart after a crash Firefox 4 is in offline mode and has to be switched back to online mode. If needed I could provide a screenshot of the error message shown when firefox crashes.
There were no problems on this machine running firefox 3.xx. The problems occurred after upgrading from firefox 3.6x to firefox 4.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Error when open Resouse Viewer form NEBC

Hi experts,
I facing a error when opening Resouse Viewer from NWBC.
Could you kindy provide some ideas or suggestiongs, Thanks in advance.
Best Regards,
Matthew He

Hello,
the SAP Visual Business frontend component requires the FPM application to run in a browser mode 'standard'. You can press F12 in your browser to adjust this.
Check note 1987004 to adjust the default mode for the application.
In addition, it is important to check the SAP VB installation guide for the right NWBC and browser version.
Hope this helps,
Marcus

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
Error when opening an RFC connection
l_dest = 'SAPHTTP'.
 CALL FUNCTION 'HTTP_POST'
 EXPORTING
 absolute_uri = l_uri
 rfc_destination = l_dest
 user = l_username
 password = l_password
 blankstocrlf = 'Y'
 REQUEST_ENTITY_BODY_LENGTH =
 PROXY =
 PROXY_USER =
 PROXY_PASSWORD =
 IMPORTING
 status_code = l_status
 status_text = l_statustext
 response_entity_body_length = l_rlength
 TABLES
 request_entity_body = req_body
 request_headers = req_headers
 response_entity_body = res_body
 response_headers = res_headers
 EXCEPTIONS
 connect_failed = 1
 timeout = 2
 internal_error = 3
 tcpip_error = 4
 system_failure = 5
 communication_failure = 6
 OTHERS = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Since updating to mac osx10.6.7 firefox crashes when opening google homepage

Firefox crashes when opening home page on google. after clicking restore get this is embarassing note if I click on restore once firefox toolbar comes up. I can than access my bookmarks and browse. however it will still crash at random sites, including any firefox help article. as exampl,e on a comics site doonsberry crashed yesterday opened today and crashed again when I went back to yesterdays site.

* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
The preferences on which Reset is greyed (not available), are they appearing in Bold Text or Normal ??

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Firefox error when opening application

Similar Messages

Maybe you are looking for