More filter criteria while searching !!!

Hi All,
Lets consider a scenario where i am facing a problem while accessing BAPI in WebDynpro.
Before posting the problem i would like to search first . If i give BAPI in WebDynpro forum search then i will return result that matches for BAPI.
How about having one more option like "Topic" where i can select that topic while searching .
Ex : If i want to search in WebDynpro then i should be able to select options like
"General, UIElements,RFC,WebServices...." etc etc in a dropdown .
And one more option is searching for all "Answered Questions" for my question. Do we have this option already ?? If so pl ingone this.
I don't know this use case make sense or not , but i feel this kind of search will reduce duplicate threads in forums.
In future , SDN can give SMART replies based on the question so that you can achieve some kind of automation !!!
Best Regards, Anilkumar
Message was edited by:
Anilkumar Vippagunta

Hi Anilkumar,
You are correct in that using solved as an additional search criteria has already been requested here:
Forum Search - no indication if the thread is solved.
I agree that this is important and have added as a request to changes, thanks.
No promise of how quickly implemented, though .

Similar Messages

Middleware-Filter criteria for Transactions replication.

Hi Experts,
Can we use filter criteria while transferring transactional data from CRM to R/3.
Like i want to restrict the replication of transactions of some BP's who belongs to one particular region. Based on the region field can i put the filter criteria for the transactions.
Points will be rewarded.
Thanks in advance
Nadh.

Hi Nadh,
I dont think if it will work. As this object is used for BulK messaging, hence you will not be able to create filters.
Regards
Keshav
PS: Please reward point if the info is useful.

Issues with Search Filter Criteria Button in Search Help

Hi ,
I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of entries are huge) by clicking the "Search Filter Criteria" button , i dont see any of the four fields using which i can restrict the data . Do we need to do any configuration for this ??
Regards
Mayank

Hi,
in that search help itself you have a option called maximum number of hits, there is a impact if you restricted also.
Thanks & Regards,
Srinivasan.R

Filter Criteria in Value Help for InfoObject

Hi,
Is it possible to remove the value from Filter Criteria. When I use F4 for a Field (in Screen) , its showing a poup window (Value Help for Info Object) with some personal values. When I click "More Values" option its showing the General Value List, where I can see the Filter Criteria. When I click "Show Filter Criteria", its showing the Criteria with a Value (This value is coming from the field(Screen) from where I am coming). is it possible to avoid of passing value from my screen field to Filter Criteria ?
Thanks
Srinivas

Murugan,
I really hope that the moderator do not remove my points for this!
WebDynpro ABAP Select-Options and OVS Help.
How to Achieve OVS Search Help in Select Option in Web Dynpro ABAP
How to Use OVS Help For Multiple Input Fields in Select-Options.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707f0d73-94f0-2d10-97a2-a3776e2118d8?QuickLink=index&…
Using Select Options in a Web Dynpro(ABAP) Application
Regards,
Ashvin

ADR/Software Updates - Filter Criteria on title string

Hello,
i want to filter software updates in the "all software updates" list or in an automatic deployment rule.
let's start with the all software updates list. example, i want all win7 updates 64bit, but no media center updates
a logical query would be:
Product: Windows 7
Title: contains "x64" AND does not contain "Media Center"
this seems to be impossile in the SCCM2012 interface as i can't change "OR" to "AND", so i am stuck with "title contains x64 or does not contain media". naturally, all available updates fall in this search criteria, making it useless.
is there a solution for this?
second try, this time in an automatic deployment rule - here i have more options, as i can add several query strings to the list. the informational message states that strings can be put in quotes for exact matches, and prefixed with
a minus symbol for exclusions. so an example filter criteria to get all x86 windows 7 updates EXCLUDING internet explorer 8 and 9 patches would look like:
again, this does not work - the result includes all x64 updates for win7, completely ignoring my -"x64" statement, it also includes all IE8 updates - no idea how this criteria is translated in the background to an sql query, in any case, it fails to give
me the result i want.
is there any solution for this?

unfortunately, even question 2 is not fully solved.
the filter strings i can put for title filtering are all combined with OR and this is a problem.
e.g. i want to show only .net framework updates for x64 systems.
when i put these filters:
x64
-Beta
Microsoft .NET Framework
i get "x64 OR -Beta OR Microsoft .NET Framework" resulting in a list that contains all x64 .net AND windows 7 updates
when i put these filters:
x64
-Beta
-Microsoft .NET Framework
i get "x64 OR -Beta OR -Microsoft .NET Framework" resulting in only x64 windows 7 updates
when i use these filters:
-Beta
Microsoft .NET Framework % x64
i get "-Beta OR Microsoft .NET Framework % x64" resulting in what i want (all .net updates for x64 systems)
so yes, i found a way to put the filters how i want them, but not beeing able to change the AND and ORs in the query, and the confusing way the negation sign is working in OR statements, make it a bit frustrating. and if the % wildcard wouldn't work i would
be without a solution at all.

Passing Filter criteria parameters to drill-down reports

Hi,
I have a scenario, where my base report prompts a filter criteria for date range (from & to date) based on this criteria, I populate my base report with data's.
Suppose if i have a drill-down, can i make use of the filter criteria value selected in the base report and pass the same value to my next-level drill-down report as criteria.
Please let me know if this is possible. Also, let me know if there is any alternate approach available to achieve the same.
My environment details are provided below.
BAM (11.1.1.3)
Report: Summary crosstab
Any help would be greatly appreciated.
Thanks & regards,
DK

Hi pypawar,
Thanx for ur reply.
We are not using heirarchical drilling in our case, we are using another report for drill-down.
I will give some more background for this issue.
We have a scenario where we used the date filter for getting the from and to dates based on which we display our Master report (cross-tab).
Further, when drilling down from the master report to child report(which uses the same dataobject as master); we are not able to pass the dates input that were provided in master report as filter criteria.
While assigning parameters in the drill-down for the child report, we are not able to find an option to pass the date value selected in the master report to child report for filter criteria.
In an alternate approach, what we did to resolve the above issue was to pass the primary key fields of the data object while drill-down. But while passing primary keys, we realised there are cases where large number of values are getting passed as filter criteria to child reports and in some case it fails since there large number values getting passed as filter criteria.(in our case the chance of this value could be few 100's to 1000's). You can find details for this error in CACHEEXCEPTION during drill-down in BAM reports
Please let me know if this is possible. Also, let me know if there is any alternate approach available to achieve the same.
Any help would be greatly appreciated.
Thanks & regards,
DK

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

Adding "Filter Criteria" to the XSLT List View Web Part impact on "Export to Excel" functionality within Document Library

Hi there,
XSLT List View displaying all the list items within the Document Library. In order to implement the Search functionality within Document library out of box "Text Filter" web part is configured as explained below. The solution is similar to
the one suggested at
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=77
"Text Filter" Web Part added to the page.
Filter Criteria (i.e., XSLT List View columns) added to the XSLT List View where the filter parameters take the input from the "Text Filter" Web Part .
3. Both Web Parts (XSLT List View and the Text Filter) are connected.
When the search criteria is entered into the "Text Filter" Web Part, it is passed to the relevant Columns of the XSLT List View and the documents (List Items) that match the search criteria are shown within XSLT List View.
Search functionality working as expected.
Query: Selecting the "Export to Excel" icon from the ribbon generates the excel spread sheet with no data except Column Titles from the Document library. In the investigation it is
found that adding the 'Filter Criteria' on XSLT List View is causing this bug. When the Filter Criteria is removed, then "Export to Excel" functionality is working as expected.
But it is mandatory to add "Filter Criteria" to implement the search functionality with in the document library.
Help: Help/input appreciated on the work around to get the "Export to Excel" functionality work when the "Filter Criteria"
exist on the XSLT List View.
Regards,

Once again thanks very much for your help Scott. very much appreciated.
In the investigation it is found that removing the 'Filter Criteria' on XSLT List View makes the "Export to Excel" functionality work. But the 'Filter Criteria' is mandatory to get the 'Document Search' functionality.
I think that due to technical limitations it should be concluded that 'only custom development can make all work, no code solutions using the SharePoint Designer can meet all the requirements.
If you can think of any alternative solution that could help in resolving the current issue or fix the issue without any custom implementation please inform. Otherwise this issue would be marked as resolved with your suggested response.
Regards,

Any notes for this issue 2 entries for 1 material while searching material

Hello All
Internal goods and services
search material which has more than one UOMs.
When i search material for internal goods and services i get two entries for one material . i know the reson why it dispalys two same items since it might have alternate UOM but however you select any one of the item it will be order unit only as UOM.
Why SRM system showing two enties for one material with same item . enduser may dismay what item item needs to select.
this must be protected right? Any suggestion not to show tow items while searching one material.
Clue:- MARM - ecc table has Alternate UOMs entries fort he material. Any one is facing this problem ?
br
muthu

Hi. I just tried it on our SRM 4 system (I know it's old, upgrade soon hopefully) and I can see the alternate UOM in MARM and also in SRM in COMMPR01, but I only get 1 hit in the search help.
Are you sure you haven't got the same material replicated twice into SRM from 2 different backends or something? Can you see the logical system in the search? Check table COMM_PRODUCT to see if there is more than 1 entry for the material maybe?
If it is the same system and the UOMs causing the problem It seems a bit odd that SAP would introduce this on a new system, have you tried raising a message with them?
Worst case you always have the BBP_F4_READ_ON_ENTRY / BBP_F4_READ_ON_EXIT BADI's.
Regards,
Dave.

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

QBE filter criteria in adf richtable disappears

Hi,
i use jdeveloper 11g (11.1.1.0.2) with ADF BC and have the following Problem:
I have a table with enabled builtin filtering. The table is contained in a page fragment of a taskflow.
At runtime I am doing the following:
1) I submit a filter criteria and get the right result. (OK)
2) goto different page and back to the page with the filtered table (OK)
3) the table displays the filtered data, but the filter input field is EMPTY (ARGGHHH, very confusing)
If you create the exact table on a simple page (not in page fragment of taskflow) the filter criteria is still shown in the filter input field as expected (and designed I think)
So is it a bug? How to work around?
Thanks,
Andreas.
Edited by: koppy on May 28, 2009 9:15 AM

Hi,
I have not tried this , but it should work
you need to get the value of filterModel attribute of af:table
so, in your backing bean if you can get hold of your table component
store your filterCriteria somewhere while navigating between pages
RichTable myFilterableTable = this.getMyFilterableTable(); //assuming your table component is associated with backing bean
FilterableQueryDescriptor queryDesc = myFilterableTable.getFilterModel();
//get teh filtercriteria from fiterModel
Map<String,Object> filterCriteriaMap = queryDesc.getFilterCriteria();filterCriteriaMap will contain your QBE criteria values , re-set your table filterModel , you can use EL to do that in which case now its binded to your backing bean filterCriteriaMap
hope it helps
Good Luck
regards,

Filter Criteria will not save in SharePoint Designer

I have a web page that contains form webpart (for entering search keywords) and a dataview with successful configuration to sql database table.
In SPD > dataview > Common Tasks:
I have created parameter with control type and texbox control ID. Then setup the web part connection to link both web parts.
In the final step I then try to set the filter criteria and choosing columns with available option of parameter name and click ok. The filter values disappear.
I have followed the steps from the following link:
http://andyparkes.co.uk/blog/index.php/2008/10/31/creating-a-multi-column-search-form-in-sharepoint-v3-with-sharepoint-designer/
Why does the Filter criteria not save?
Thanks in advance.
-- techChirag

Hey, I dont suppose anyone's found a solution to this yet? I've succesfully done this on a few different Site Collections, but for some reason it's not working on my latest one. As above, after setting the Filter Criteria and saving the page in SPD2010,
the filter criteria just dissappears. Random!

Set filter criteria on page 1 for page 2 OData model - "best practice"?

Hello, I have a problem with an app - where I want to filter data on a second page, based on settings from the first page. I use an OData model.
The collections on both pages are not related in terms of "navigation" properties, that is my problem and I can not change the data source...
So I am looking for ideas/best practices to solve this because sometimes my filtering doesn't work... the following problem occurred: Request aborted
I have a page with a sap.m List with items="{/tabWorkPlace}" and and a local JSON model where I store relevant data during the app lifecycle.
handleListSelect - first page
var context = evt.getParameter("listItem").getBindingContext();
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = context.getProperty("WORKPLACE_ID");
dataModel.setProperty("/WORKPLACE_ID", workplace);
this.nav.to("SubMaster", context);
The general App.controller.js handles the nav.to function:
var app = this.getView().app;
var page = app.getPage(pageId);
if(pageId == "secondPage") {
page.getController().filterData();
And the controller of the second page:
filterData: function() {
var oModel = sap.ui.getCore().getModel("odata");
var dataModel = sap.ui.getCore().getModel("dataModel");
var workplace = dataModel.getProperty("/WORKPLACE_ID");
var items = this.getView().byId("list");
var oFilter=new sap.ui.model.Filter("WORKPLACE_ID",sap.ui.model.FilterOperator.EQ,workplace);
items.getBinding("items").filter(oFilter);
I don't write this code into the onInit() or beforeRendering() function, because they are called only once and I am navigating back and forth between the two pages, because the pages are created only once and "just" the data is changed.
The desired page looks like this - with an other collection bound to it:
<List
id="list"
select="handleListSelect"
items="{/tabWorkstep_Status}"
>
But when I call it - then the request gets aborted:
The following problem occurred: Request aborted
But despite the fact the Request is aborted, the list on the second page is filtered!
The filter criteria for the model works when I type it into the browser with URL. Maybe this fails because the data binding for the list didn't took place at this phase?
I have this pattern (filter criteria on one page and result on the second page) more times - (and I think a better data model would be better with navigation properties would be better, but I cannot change it)
But at another constellation the filtering doesn't work - same error... the following problem occurred: Request aborted
I also don't want to change the pattern (page 1 to page 2) into popup lists or this fancy new filtering possibilities because it is not suitable for my use case.
Is there maybe a more elegant solution - because sometimes filtering works, sometimes don't..., do I have an error in my solution (general approach)?
Many thanks for any input!
BR,
Denise

Hello, yeah you are right, but it works without the odata> stuff because of this in App.controller.js:
var uri = "http://localhost:32006/JsonOdataService.svc";
var oModelMS = new sap.ui.model.odata.ODataModel(uri);
sap.ui.getCore().setModel(oModelMS, "odata");
oView.setModel(oModelMS);
So my question is - how to navigate from one page to another - and on the other page first bind a collection to a select and then when selecting bind certain elements (a textfield) to the selected filtered entity.
The stuff with context and binding won't work, because the two Collections don't have a navigation/association property between them...
So for example:
page1
select a list item with property color: red and year 1985. Press one of the buttons and pass this criteria to another page.
page 2:
show a dropdown box with all car names which fullfill this criteria, and when one car is selected, then display the data for THIS car in several text fields.
This is not a master->detail navigation example, because on page 1 i select certain criterias, and then with buttons I navigate to several pages with those criterias.
But since the OData model has no relationships it is really hard to do it manually... With a dummy mock.json like in DJ Adams Fiori like SAPUI5 apps it is no problem... But with OData and no things related to each other it is hard...

Want to add new status while searching PO in EBP

Hi All,
While in EBP, I want to search for POs at link: PURCHASE ORDERS>>PROCESS PURCHASE PRDERS>>FIND.
At this position i want to search for the POs with some statuses like: ordered,awaiting approval,in your inbox etc..
I want to add 2 more statuses while searching POs. These statuses are "Transaction Completed" and "Error in Process".
Please tell me how to add these 2 extra statuses there.
Reg,
Bis

Hello Bis,
You can find PO in status 'Error in process' using status drop-down list with wording 'Transfer Failed': this is standard.
Regarding status 'Transaction completed', why do you want to make a difference with standard status 'Ordered' ?
Regards.
Laurent.

Filter Criteria with where condition in graph api query

Hi
Filter criteria in graph api is working fine through this api
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName eq 'Ashok'&api-version=1.5
Select criteria is also working fine through this api
https://graph.windows.net/ adummydirectory.onmicrosoft.com/users?api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But when I am combining both query that means, I want that select criteria should also apply with filter clause like
https://graph.windows.net/adummydirectory.onmicrosoft.com/users?$filter=displayName
eq 'Ashok'&api-version=1.5&deltaLink=&$select=displayName,accountEnabled
But its generating error
    "odata.error": {
        "code": "Request_UnsupportedQuery",
        "message": {
            "lang": "en",
            "value": "Unsupported expression node type 'Equal' for Where expression."
So please suggest how we can use select clause with filter criteria. our requirement is that we don’t need all attributes .we want selected attributes for filtered users.

Greetings!
The differential query syntax does not allow for a filter other than $filter=isof(<directory entry type>). You are not able to use any other query string for this type of query. Please see the following MSDN link for details:
http://msdn.microsoft.com/en-us/library/azure/jj836245.aspx
I will need to do a bit more research to see if it is possible to request specific attributes for an object query and post back to this thread when I have a response.
Regards,
MaxV ( MSFT )

More filter criteria while searching !!!

Similar Messages

Maybe you are looking for