Firmware Question about WRT54G

I have an iMac G5 and am wondering...on all the forums, it says that 1.0.11 is the latest firmware, but when I got downloads and select the product, it says the latest is version 4.35. Can someone clarify?

nevermind, figured it out.

Similar Messages

Questions about Micro-Firmware (Not 2.x.x

Hi Guys,
i got some questions about the .0.03 firmware.
) What's the difference between the :
ZenMicro_PCFW_LB__0_03_PDE.exe ,57 MB 8 Feb 05.
and the
ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04 ?
Does "US" means that this is the north american version ?
So what is LB ?
2) I've got the "ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04". Is there any use of upgrading to the one from 8 Feb 05 ?
3) ZenMicro_PCFW_US__0_03_PDE.exe
Does the "E" at the end means "european", so the loudness is reduced ? Must be something different because it's also included in the firmware from the american site.Message Edited by Baron on 02-20-2005 09:0 AM

From what I've picked up elsewhere in the forum, the LB version of the .0.03 firmware just includes MORE LANGUAGES (for the user interface, i.e. menus) than the US version of that same firmware. see : http://forums.creative.com/creativel...essage.id=2374 ... which, really, you should have found using the search function, before posting. --Fred.
/edit: linkified.
Message Edited by fred_be9300 on 02-20-2005 06:48 PM

FAQ Broken: How do I upgrade the firmware on a WRT54G Wireless-G Broadband Router?

I tried to view the above question in the FAQ, but it goes to the answer for a different question.
I then tried "How do I upgrade the firmware on my router?" a little further down,
but it acts like I'm not authenticated, and won't accept my Linksys Forums e-mail address
and password. When I try the password recovery, it says my e-mail address is invalid.
Can someone please point me to instructions for upgrading the firmware on my WRT54G?
Specifically, someone told me that the router needs to be listening on the default 192.168.1.1
IP address, but mine is listening on 10.1.1.2. Do I need to change this just to flash new
firmware, because that will be a little painful.
Thanks,

Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - "Default Gateway of Your Router"...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
**To Check the Default Gateway of the router...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
**To all the above setting using the wired computer.

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

Question about Home Hub 3 Noise dB Margins

Hi everyone, I'm due to get BT Infinity on Friday... 1 more sleep
I have a question about the Noise Margins, I can't seem to find them within the Router, I've skimmed some articles and posts, and even tried to use the search feature but can't seem to find how to find this information.
One page actually said about you need to unlock the homehub3, if this is so can someone point me in the right direction it's not something I want to do after install due to the fact your suppose leave the connection left in for 10days etc.
Let's assume I have to unlock it, does this break warranty in anyway or could it cause problems with the install and engineer.
I'm fully conident when it comes to flashing routers done tons, was a DDWRT guru back when I was using Virgin Media
Anyway, if you know point me in the right direction. Thanks
EDIT: I've just read that it requires a firmware can someone point me in the right direction, Yes it's geeky stats but its also useful, last two times I trusted there automated system well Sky, I lost out on 4mb after ringining them they reset the test I know BT / Sky now do it on intervals, but not the point....... This information should be public viewing for spotting protential problems outside the home.

Ok, let me re-phrase that, now that I'm almost awake after a very poor nights sleep.
It's irrelevant on some infinity connections
I was discussing this very subject with an individual in the ELTC team, which could be the same for the OP
I guess some adsl stats prior to Infinity being installed could ascertain the likely hood of a decent speed
-+-No longer a forum member-+-

Question about SUS

Hi, i have a question about SUS update.
I live in a place were internet conection is very limited. During the update procedure, conection droped a few times. Sus told me to retry, and when i got conection, it resumed itself from where it did stop and went on.
My question is , can i have a corrupted firmware? Or does SUS make a checksum before updating the phone?
Phone is fine, but i wonder if i could have problems in the future because of my bad download conection.

your phone should be fine, if anything goes wrong, which I doubt it, you can re-download the update
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

IDRAC 6 Express - Update Firmware Question

Hello,
does anyone know if updating the iDRAC 6 Express firmware via the web gui causes any issues? I know it needs to reset itself. But I am wondering if it requires a full reboot or does the NIC reboot? Thanks.

I posted a more general question about this is this post (http://community.spiceworks.com/topic/1087984-do-i-really-need-workgroup-agent-license-for-shoretel?.... ) , but unfortunately, it kind of went cold. So, I am reposting with a more condensed question. We have a group of employees that will be hot desking on their phones and will also be using Communicator. I want them to always be logged into a workgroup which I understand canbe done fromDirector. My question is,do the users that are logged in via Director stay logged in when they hot desk from phone to phone? Assuming that is the case, do I need workgroup access licenses if they are never going to be logged out of the workgroup?

Question about router WRT54 GL

Good afternoon, I have following problem/question about router: WRT54GL.
I configured the router to operate in my network without any problems except for the following:
When I made tests of speed on computer which is connected directly to the cable from my ISP (ethernet, speed 64 mbit /s during download). When I connected the cable from ISP to the router and router is connected to the PC also using ethernet(from router port 1 to the pc) the speed behind a router decreased to 20 mbit. What I am doing wrong? or is it just a limitation in router's performance?
Thanx for any help
Johny Krekan,
[email protected]

Open the setup page of the router.
Set the MTU to Manual and change the size to 1365.
Save the settings and power cycle the router. Check the speed.
Make sure that firmware on your router is latest.

Question about upgrade and original iPhone

There might be other thread already, but have a question about upgrade to 3G.
I have the original iPhone and have upgraded to iPhone 3G.
The question is whether I can use the original iPhone indefinitely.
People at Apple store was telling me I can use the original iPhone (without the phone functionality) as long as I don't restore the firmware.
Is this true? What happens if Apple releases firmware in the future? Would this mean that I can only use this as long as machine doesn't require restore? I wanted to give it to one of my family members so she can use it as iPod so any info would be helpful ....

My understanding is the same as the Apple Store Employee.
If you try to update the software on an iphone with no service, I believe that it will be rendered useless.
It may be possible to swap the SIM card for software upgrades, etc., not sure.

[Zen Micro]Questions about the Firmw

Hello,
I have some questions about the firmware of the Zen Micro
. Can I use the Zen Micro without any Software (MediaSource?) on my PC (winXP) when im using the Firmware Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 ? This means that i copy my Music only by drag&drop from the Explorer after my Computer has detected the Zen Micro as a Removable Disk!
2. I know that the Zen Micro has two parts with the Normal Firmware. The "Removable Disk" Part and the "Playable" Part which can only used by the Software! But what happens if my . question is right. How can i seperate this two parts?
Thanks for answers

I don't have the 2.x firmware, but I think I'm correct in saying this :
with the 2.x firmware, your Micro becomes an MTP compatible device, which can be recognized on PCs having an MTP compatible OS (operating system). For the moment, the only OS that fits the bill to my knowledge, is Win XP with Windows Media Player 0. In this combination of MTP device + MTP OS, you don't need to install other drivers, and you can do drag and drop
BUT ! The 2.x firmware doesn't make your device a "removable disc" in the traditional sense of the word. It doesn't become a file system, like a USB memory stick.
I hope I was clear enough to see the difference :-)Message Edited by fred_be9300 on 04-03-2005 02:52 AM

ANOTHER Question about my iMac G3. Mac OS X and RAM

Hey, I have ANOTHER question about my iMac G3.
I know that I'm supposed to have the latest firmware updates for my iMac G3 running OS 8.1, which I do, but I read some where these firmware updates could only be updated if you're running OS 9.2. Yet when I run the firmware updater, it says my firmware is up to date. I just wanted to make sure this was correct because I just ordered an OS X 10.2 CD today, and I don't want my mac to be "dead" when I install it.
My next question is how much RAM can my mac hold. It's an iMac G3 with a 233 mhz processor, if that makes a differemce.
Again, thanks to the people who have helped me with my first Mac.

hi there--
unfortunately you require system 9.1 or 9.2 for the required firmware update 1.2 for your computer http://docs.info.apple.com/article.html?artnum=86117. so you'll have to install that if you want to install 10.2. it may work for you for a little while, but then you could possibly lose all your information. so i wouldn't advise attempting installing 10.2 without the correct firmware. [ : ) ]

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about using the Voice Memos app

I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?

You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent.

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Firmware Question about WRT54G

Similar Messages

Maybe you are looking for