First update ok, second not possible...

Hi all,
Got my Nano recently (my first iPod).
I have the latest iTunes (5.0.1) and have the latest Nano firmware (1.0).
I have found when connecting my Nano it updates fine. If I then go to update again (right click and select update) it tries but then I always get the message:
"The disk can not be read from or written to"
If I maually disconnect the Nano and re-connect it it again syncs fine the first time but not the second.
This is both an annoyance and a major problem as if I wish to change the iPod properties - i.e. add a photo dir or change my podcast settings - it looses these changes when I disconnect. The only way around this that I have found is to quickly make the properties changes whilst it is still updating - then it keeps them.
I have reset and restored the Nano, tried different hubbed and non-hubbed USB ports, re-installed iTunes. Nothing works.
Has anyone else had this - can you help?
Rich

You might want to enabling Disk use to see if this acts as a workaround in the short-term. Typically Disk Use requires you to manually eject the iPod prior to disconnecting it from the computer. Perhaps this will keep the connection live for you.
My Shuffle has a very similar behavior since applying the lastest firmware update (iPod Update 2005-09-23).
My hope is that another update is coming soon that will correct the problem.
Best Regards-
Randy

Similar Messages

New notebook HP635, first turn on is not possible because of: "no bootable device"

I have buy new notebook HP 635,
first turn on is not possible, because it write "no bootable device - select one"
hard drive is OK, and it should have sort of Unix on it,
contact support is truly not easy, because it is not able to recognize SN and PN:
PN: LH426EA#BCM
SN: 5CB1191MCH
(normal notebook, physicaly at home, buy 2 days ago)
What should I do to start instalation process?

hello
try press F11 while booting up laptop to force from recovery instaltion. If it not works maybe recovery is damaged or was no preinstalled system on it.
Try bios Hard Drive test to ensure hdd is ok.
If U have OS cd/dvd try from it.
If bios test is failed contact HP for hdd replacement if passed reinstall system.
If it wont be possible contact HP - Ur serial should defined in their system.
let me know.
BTW. heres page with HP warranty check where U can confirm warranty by serial number. If its there it should be also detected in HP data base.:
https://h20565.www2.hp.com/portal/site/hpsc/public/wc/home/
click on Kudos if i helped U

Request does not contain any saved update rules; rollback not possible

Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.

Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan

Updating license data not possible [Maintenance Package]

Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data completed from destination [Maintenance Package]
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished [Maintenance Package]
Refresh sessions from destination SM_KSMCLNT001_BACK started [Maintenance Package]
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
> Logon not possible (error in license check)
> Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan B

Hello Manikandan
The error indicates that there is an issue with the *_back RFC destination
itself.
Have you done an authorisation check within SM59?
Utilities > Authorisation check?
You can also do so by testing the connection in SDCCN.
Goto > Taskspecific settings > RFC destination > Backdestination
This problem is often caused by the user in the RFC connection
being locked in the Solution Manager.
Make sure the RFC user account is a communication user so the password does not expire. Sometimes the password expires and the RFC user locks the account as the old expired password is provided too many times.
The message also indicated "No active master Solution Manager destination maintained"
Please make sure the relevent Solution Manager system has been marked as Master in SDCCN Goto > Taskspecific settings > RFC destination >
These are things you will want to check.
I hope this information helps you resolve this problem.
Regards,
Paul

Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

Apple, Apple, Apple... (again)
Is it so difficult to let things, that are quite good, just there where they are??
After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
Before they were over 2000 songs in it.
And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
And this is not the first time Apple.
It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new - AND "Valuation" - old.
But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
What is that?
I also couldn´t delete the iTunes app from my app-folder.
So, and now?
I had to totally restore my volume !
What is that for a solution?!
So please think before you delete any functions, who is needed by many people.
And if you did, maybe ask some users, that uses for example smart-playlists alot, if there is a problem about some changes, you want to add.
I hope anyone from Apple read this and also answer me. Because I´m upset about that.
In every iTunes-Update I am concerned about what will be after the update.
For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
I was VERY upset.
So after an other update, the opportunity to give half stars are back.
I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
So, have a nice weekend.
Greetings from Germany.
Marco Blum

Hi..
Use Lion Recovery to reinstall the Mac OS X.

Java platform and Java Deployment should be updated but there is no other version, always the warning to update but thats not possible

Java Platform 7u9 and Java Deployment Kit plug-ins are yellow and asked to be updated.
The problem is that there is no other version than I have already installed.
Even if I try to instal this latest version again I've get the message that I already have the latest version.
The same problem was with Flashplayer where I installed the latest version but three days Firefox asked to update the plugin.
The last one is now ok but Java Platform and Java Deployment Kit is hopeless.
Why it ask for an update if there is none?
What should or can I do? I always be careful and patch my pc if necesserry.
All my friends who are working with Firefox have the same problem.
Can anybody tell me whats going on here?
greetings, Mimi321

Hi
There is still an issue for me. When i check to see if add-ons are up to date it identifies "Java(TM) Platform SE 7 U9" as out-of-date and gives me an orange "Update" action. When i hit this it takes me to the Java website giving me "Recommended Version 7 Update 9". This is the one i've already got so i cannot get rid of the orange Update action buttons.
Furthermore, if i try the link earlier in this thread to test to see which version of Java i should be using it says "Congratulations! You have the recommended Java installed (Version 7 Update 9)" so i'm not sure what this talk of version 7.10 is about?

Raw update needed but not possible

Lightroom 5 keeps complaining that I need to update Pshop's raw app to 8.3.
In Photoshop CC, the Update menu results in "everything is up to date" -- even though Raw 8.2 is there.
-- I tried the super-secret Raw update installer. It resulted in an "illegal operation" type message.
-- I deinstalled and reinstalled Pshop CC. It installed Raw 8.2!
-- FWIW, Premiere Pro is also outdated but CC app also says it's up to date.
-- Isn't Creative Cloud supposed to replace Adobe Application Manager? Why does the CC app and AAM take turns popping up to offer (erroneous) information?
Surely there is a way to tell the Creative Cloud to reset my application list.
I have spent hours trying to resolve this over the past few weeks.
If you tell me to de-install and reinstall the entire Creative Cloud, I'll request a $100 credit. I have already lost at least a day of production trying to troubleshoot this.
MacPro, OS X 10.7.

A reinstall of CC Desktop does not rebuild the inventory folder. That is the issue. An uninstall and reinstall does appear to rebuild the Photoshop part of the inventory, but Camera Raw has is a separate component as far as the inventory is concerned. There is no Camera Raw uninstaller that I have been able to turn up. If the Camera Raw data in the inventory folder is for the wrong version or is not there at all, the Camera Raw installer will not run. That is what makes it unrecoverable. It took me all of 7 months to get past the India based support (who really don't have the training to even understand the problem) to somebody who did. A couple of weeks with him did not really resolve the issue either, but now I at least know what the issue is. We will see tomorrow when the 14.2.1 update is release whether or not the reinstall of Photoshop actually resolved the problem I was having with that ifailing to update too. I've reinstalled the CC Desktop Application at least a dozen times, and Photoshop CC at least 4 times, but tech when I contacted tech support on the failure of Camera Raw to update, they always had me delete the whole inventory flder, which kills pretty much any updates. It's a really ugly situation. I'm told that the day before I actually got through to an American support person, the notice went out to India to stop deleting the Inventory folder. The real solution is a simple check that inventory matches reality, but as of now Adobe doesn't do that. If there was a Camera Raw uninstaller that could be made to work (if there is one in the installer, it craps out before the uninstall option is available). Without the uninstaller, there is no way to get the installer to run, which mens that the only way to install the updated Camera Raw plugin is by drag & drop from the installer package or from another installation. This does not update the inventory folder, so the next time an update is available for Camera Raw, CC Desktop will not see it. If it doesn't see what it is looking for, it announces that everything is up to date and offers no install option. It's sloppy programing for sure. Why it hasn't been fixed already is beyond me. Hopefully it will be in the near future. But as of now, if there is a way to do it, nobody at Adobe seems to know what it is. As I noted I have an experiment planned for the next Camera Raw update, which as far as I know isn't tomorrow. At the moment I am medium sure that Photoshop will update properly tomorrow but even that is an unproven assumption at this point. You will almost certainly think this makes no sense, and no one could agree more than I do, but that is the situation as it stands. As for time wasted, I have spent many full days working with tech support at verious levels getting told to do exactly the things which will make it worse, or letting them take control of my computer and do the make it worse thing themselves. At one point they even had me uninstall the CC Desktio app WHILE IT WAS RUNNING AND IT ACTUALLY DID REMOVE THE FILES WHILE LEAVING IT RUNNING IN MEMORY!!!! The resulting crash caused a huge amount of corruption on my HD which took another full day to recover from. Adobe promise me credit for time lost due to failure to update, but so far I haven't seen a dime. A happy camper I ain't, but there may be a light at the end of the tunnel.

How activate Camera Raw for Elements 11.Update button is not possible!!!

Hi @all,
i have Elements 11 and can not activate the update for Camara raw . At the moment is version 7.1 active.....but i need a higher version for my cameras. So what can i do now?

I downloaded DNGConverter_7_4.exe but i have the same problem ....Element can not open the raw files of my camere because Camera raw 7.1 is active....how can i change it? Sorry for my bad english ....anybody here for german?

Data collection task in Update mode is not posible with Original list

Hi Friends,
When I try to Execute the Task for data collection in sa38.I am getting the Error with in 9 sec.
UPDATE MODE IS NO POSSIBLE WITH ORIGINAL LIST
Message No. UCS0111
Diagnosis :
If you select the indicator"original list"the current task status is ignored.In this case,the system simulates a task run in with all of the organisational units are not yet blocked.Thus,setting this indicator is meaningful and valid only if the task is executed in test mode at tthe same time.
procedure : select the original list & Test run together.
My problem is I can not select the Test run in production server.
Can any one please help me to solve the Issue.

I Thank you all for Responding to me.
Hi Dan,
SA38 provides all the needed parameters- Con.Group,Company,Version,Fis.Year,Period,Group currency.
Iam trying to run the task with SA38 for Data Collection.
Hi Lucio,
When I Check the Fields Both the Log & Original list . The programe gives an error message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
Even when I tried with Log,Test Run & Original List Iam getting the Same error Message "UPDATE MODE IS NOT POSSIBLE WITH ORIGINAL LIST"
I can run the task Successfully with selecting the Log option only. But my Client need to Use both Log & Original list ( as they used to run in BIW 3.5 ) Now it we are using BI 7.
Hi Christopher,
We are running the programe UCBATCH01,with the T code SA38.
Hi Eugene,
I will look in to the link and i will Discuss with the Basis team.
Once again Thank you all for responding
Suraj.

CIF queues - Lock not possible error in application log

hi,
Below is the application error log from SLG1
Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
We are currently checking, if this could be due to some issues with LiveCache processing.
Any input would be helpful.
SLG1 - Application log errror:
Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
Access block: data from system CLAF updated again
Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
Object is locked at present
Thanks,
RajkS

Hi Raj,
Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
locking issue.
also check the workprocesses details during those time. whether you have enough space to process the reqd the
t-data.
Regards
DPS

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.

Bei aktalisierung erfolgt das download, nach ende Download kommt Fehlermeldung fehler beim Download (Installation nicht möglich, Versuchen Sie es später noch einmal.
Kennt jemand das Problem, was kann ich tun?
Harald Bässle
Emailaddresse: [email protected]

Hello,
I installed the newest Application Manager some updates seems to be installed now but extension manager CS5 5.0 update is not successful > error code U43M1D207. What I must do?
I this the right way t answer?
Whating for reply
Thanks
Harald
Von: R_Kelly
Gesendet: Freitag, 29. August 2014 03:41
An: Harald Bässler
Betreff: I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <https://forums.adobe.com/message/6683157#6683157>

HT1766 I'm trying to update my first Ipad (versions 4.2.1). Device is recognised by the computer. Advise to upgrade to 5.1x given but then followed by the message that device is not connected to internet. Connection with upgrade server not possible.

Whilst connected to the internet (reading news and sending messages) I cannot upgrade my Ipad with an error message that my device is not connected to internet. Update server can not be reached?
Any ideas.
Ipad 1, version 4.2.1

I tried resetting the ipad, switched off wifi, checked date and time.

TS1717 Only part of each of the songs were downloaded (maybe the first 20-50 seconds).I have updated my itunes software.How do I try again?

Yesterday I purchase two albums from the iTunes on line store. After they were downloaded I realized I needed to update my iTunes software (software couldn't recognize my CD burner). Once I updated iTunes, I burned each album onto a seperate memorex CD-R. When I went to listen to them today on my drive to work, only the first 20 - 50 seconds of the songs are there. At home I tried to play them directly from my iTunes library and the same thing....I didn't get the songs in their entirerty. Is it possible to download them again from the iTunes store without re purchasing? and yes, I restarted my computer after updating iTunes Help???

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?

Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed

First update ok, second not possible...

Similar Messages

Maybe you are looking for