Fix an ERROR -URL
Hi I'm trying to get onto a website in the UK to do some bookings. I keep getting ERROR The requested URL could not be retrieved. 104 connection reset by peer?? I went to my friends house to use her mac and it works??? What do I do?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Similar Messages
-
How to fix 'Unexpected error: Incorrect value: Location URL' in WSDL
Hi All,
Using SOAMANAGER transaction, I created a service ECC_CUSTOMERQUOTEERPCRTRC and its binding 'ECC_CUSTOMERQUOTEERPCRTRC_binding' using the Create Service option under the tab Configurations and using the web service definition 'ECC_CUSTOMERQUOTEERPCRTRC'. When I click on the link "Open WSDL document for selected binding" under the tab 'Overview', I get the following XML code in the popup window for the WSDL.
- <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <soap:Body>
- <soap:Fault>
<faultcode>soap:Server</faultcode>
<faultstring>Unexpected error: Incorrect value: Location URL for subject IF {http</faultstring>
- <detail xmlns:slibfault="http://xml.sap.com/2005/11/esi/slib/fault/">
<slibfault:timestamp>Wed, 17 Nov 2010 22:29:02 GMT</slibfault:timestamp>
- <slibfault:exception>
<slibfault:text>Incorrect value: Location URL for subject IF {http://sap.com/xi/APPL/Global2}:CustomerQuoteERPCreateRequestConfirmation_In not found</slibfault:text>
<slibfault:position program="CL_SIDL_SUBJECT_ADAPTER=======CP" include="CL_SIDL_SUBJECT_ADAPTER=======CM006" line="47" />
</slibfault:exception>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
The XML code for nthe WSDL displays an error 'Unexpected error: Incorrect value: Location URL for subject IF '. It looks like the code could find the required URL. Please let me know how to fix this error.
Thanks in advance.
--R DHello.
In SOAMANAGER delete your "unexpected" service (endpoint).
Then create it again.
If same error will occurs - try to delete all definitions of this service (include sicf-transaction) and then create it completely again.
Hope it helps. -
We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC) 0x1BC0 SharePoint Server Search Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588) 0x1DE4 SharePoint Server Search Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC) 0x1060 SharePoint Server Search HTTP Protocol
Handler du4i 0x29E4 SharePoint Server Search HTTP
Protocol Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x29E4 SharePoint Server Search HTTP Protocol
Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x130C SharePoint Server Search Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x2948 SharePoint Server Search Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvg0 High STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
en0e High CSTS3Accessor::InitURLType: Return error to caller, hr=80041200 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dv3p High CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb1 High CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil LokaHi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error 'url not in active profile'
Sometimes when trying to log onto the internet (with my N85) I get the error: URL not in active profile. I change the connection (as I seem to have about 3 or 4 options to select with virgin, but that doesn't always help. I'm trying to open a bookmark, so not sure why its says its not in my profile.
I'm confused. Any suggestions as to what/where I should be looking.I found a solution, restarting my phone seemed to fixed the problem.
Reminds me of when IT departments say "have to reboot your pc?" Simple, but effective in my case. -
I am using EP 7.0 SP15. I have created an index to Search the WPC Content. The properties for the index are as follows:
ID: wpcIndex_DEV
Name: wpcIndex
Group: none set
Crawler Parameters: standard
Active: checked
Service:Trex Search
Service Type: Search
Items to Index: All
fuzziness: 0.7
Data Sources: root>Web Content
When I look at the Index Monitoring I see:
Status: red (There are too many TREX Errors)
Index: wpcIndex_DEV
Status: Idle
InProcess:0
Indexed: 492
Errors: 109
All 109 Errors state the same Error Type: "Trex: Preparation failed: index operation"
I have found alot of documentation on how to set up TREX Indexes or how to check them but nothing on how to fix the errors. Can someone please point me in the right direction for getting this index to process correctly?Hi TA
What version of WPC are you running?
In the older versions of WPC the internal links are hardcoded (thus not using the correct URL from the URL generator service). Try to republish the WPC pages and see if that doesn't solve the problem.
You also did not set up the index according to the documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/e58d6e146d5591e10000000a1553f7/frameset.htm
Remember both the crawler, and the custom property.
Best regards,
Martin Søgaard -
[svn:fx-trunk] 9398: Fixing compile error.
Revision: 9398
Author: [email protected]
Date: 2009-08-19 13:38:05 -0700 (Wed, 19 Aug 2009)
Log Message:
Fixing compile error.
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/effects/examples/Rotate3DEffec tExample.mxmlCamuzo, please go to the forum and just un-subscribe yourself.
each of your emails is getting sent to everyone who does want to use this forum
just sending messages is not going to do anything.
GO to this url:
http://forums.adobe.com/community/opensource/flexsdk
and simply tell your account not to be emailed.
But, please kindly stop just sending us all your messages. -
Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?
Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
CarolThe first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG 36 KBother PNG
Attachments:
Broken Arrow on EXE.PNG 179 KB -
I have been trying to start up my Batman: Arkham City game recently and it says that it cannot open and gives me this error;
"Terminating app due to uncaught exception 'NSInternalInconsistancyException', reason: 'Model session requires model window'"
I have played the game for about 13 hours before this error started to pop up and I was wondering if anyone knew of a way to fix it. Any information would be greatly appreaciated.Yesterday I had the same problem.
I installed the game and played for five hours with no problem but in the last execution my iMac show me that error. I tried to uninstall and install the game again but always show me the error. I did the same with the Steam client with no solution.
Finally I fixed the error deleting a folder.
Go to Macintosh HD/Users/[username]/Library/Caches/com.feralinteractive.bmac
and delete the folder named "com.plausiblelabs.crashreporter.data"
Try to launch the game again.
Good luck. -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks
You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5 -
When i tried to update my apps in the app store, i coudn't update because of particular error is irritating me whenever i try to update..[There was an error in the app store please try again later.(20)] Any one suggest me how to fix this error soon.
Yea i deleted all the apps which was purchased earlier with old Apple id ..and nw i installed all apps with my new apple id...Tanq for helping guys (Linc Davis and Dah•veed ).
-
How do I fix an error "4652747.png" when publishing my iWeb site to iMac?
Every time I try to publish my iWeb site to .Mac I get an error message that says there's an error in " ...files/ca4652747.png." I know this is an image file, but when i search for it on my hard drive it shows a blank image. I've tried deleting the file from the hard drive but when I re-publish, a second file "c00ff001c.png" on a different web page shows the same error. I can't figure out how to fix these errors. It publishes to a folder, or so it says, but i don't know how to check that. I am supposed to publish the entire site at the end of this week and have all the work done but can't get past this point. Can anyone help me? I'm a new mac user and this is my first shot at web design, so I've probably missed something obvious, but would appreciate any help.
k, try this:
backup your domain file! delete the one in the folder BUT HAVE A COPY OF IT SOMEWHERE ELSE. Then open iWeb, create something save it and publish it!
now go to your backuped file,make one more backup!!!!
move one of the backuped files into the Users/username/bblablabla folder and open iWeb. try publish all and see if it works!
max -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.
Maybe you are looking for
-
FTP Sender Adapter, Empty Archive Files
Hi, When I retrieve files using a FTP sender Communication Channel and I checked the Archive check box (including an existing directory), the file is archived but it does not have any content. It is completely empty. The original file contains data a
-
[Oracle SQL Developer] Vs [Eclipse + Toad plugin]
Hello, Have anybody tried to develop PL/SQL code in both of them? What is better? How do you find Eclipse? Best Regards slkLinuxUser
-
ISE: UI not visible for application launched by NAC agent during rememdiation #CSCun60071
Hi guys, Someone facing this behavior/problem? When I start the remediation process (AV) with a administrator user, the process works fine. But when I start the process with a normal user, the AV UI update start running in the Windows Session 0 and t
-
I dont know if this is the right place to post this question or not but i am still posting it here hoping that someone will answer i is it is very critical--> I create a new partition /u08 on on Test and everything was fine. Today i did it on PROD(so
-
DISKS GET EJECTED WHEN INSERTED : what to do ?
one month ago, I replaced my old combo drive in my PB G4 15" Titanium by a MATSHITA DVD RAM UJ-845S (bought as OWC Mercury optical drive). It worked very nicely until a few days. now whenever I insert a disk (cd or dvd), it makes a few unusual noises