Fixed Bin strategy level batch
Hei, i got requirement to used fixed bin strategy but at batch level.
is it impossible to do this?
if yes, please let me know
thanks
In general, the fixed bin strategy allows you to specify the bin to which a material will be placed during a putaway transaction (provided the concerned storage type has putaway strategy configured as F).
I understand your requirement is to place different batches into different bins ie the bin is determined depending on the batch.
While not possible in standard, you can try making use of an exit for this purpose. The exit MWMTO003 may be used in CMOD to develop your own putaway strategy. You will have to activate the exit (a checkbox) in the putaway control parameters in the storage type configuration.
Check the documentation in the following IMG path:
Logistics Execution > Warehouse Management > Strategies > Putaway Strategies > Develop Extensions for Putaway Strategies
Hope this helps.
Regards,
Aroop
Similar Messages
-
Wm fixed bin & sales order material differentiation
Hi Friends,
If I have one material which can be used in production & also can be sold to customer.
As I have fixed bin strategy if qty is low for the goods receipted from the vendor then it goes to fixed bin else high rack.
For the purchases for sales order we keep that material in high rack storage.
How can I differentiate so that goods receipt for sale should be moved to High rack storage.hy,
we have the material that has a fixed bin setted up like this:
eg.
storage type 001 = fixed bin
storage type 002 = reserve (high rack)
so all the material that have a fixed bin, have the set the stock placement value in the material master to 002. Then we have a replenishment job that always refills the stock in the fixed bin location if the stock has reached the minimum bin quantity.
hope that helps. -
L_TO_CREATE_MULTIPLE, --- Fix Bin Problem
Hi,
I've used fix bin strategy in warehouse management, and I set a fix bin B01 for the material 100-100,
If I create a transfer order for this material via Tcode LT01 and assign a destination storage bin B02 to it, a <b>WARNING</b> message appeared, but I still can post the transfer order;
But if I create a transfer order by function module L_TO_CREATE_MULTIPLE to do the same things above, the system gived me an<b> ERROR</b> message,
So, what's the reason? Did I missed some parameters? because it should be a warning message.
Please kindly help.
Thanks and best regards.hey I got one requirement to use the L_TO_CREATE_MULTIPLE function module for "create transfer order Delete Vechicle WM" and I think I should use Movement type for this to delete vechicle, so please help me, if you know the answer.
-
Client Specific Requirement Fixed bin storage type
Hi There is one requirement if anybody can help,
A company has fixed bin storage for a particular material, But they keep that Material in PC(Pieces) as well as in Boxes( say 1bx= 5pc) But they want to keep the pieces in a one fixed bin (say 1) and the boxes in a another different fixed bin(say 2), though the material is same.
So that when a transfer order is made for material in pieces it automatically refers to bin1 and if it is made for material in boxes it refers to bin 2.
Please any body help me and let me know how can we configure this. If you have any specific files please mail at
[email protected]
ThanksHello Harsimram,
Why you can not ask?
When the thing is not logically possible then there is always "Change Management"
Regarding the Requirement, We can not use user-exit with fix bin strategy so that option is also out of scop.
Regards
Arif Mansuri -
Replenishment of fixed bins for batch managed materials.
WM - Replenishment of Fixed Bins. Batch selection and full pallet selection
My issue is as follows: I am performing the replenishment of fixed bin based on SD deliveries. Stock is batch managed and batch selection is based on the shortest expiry date. If there is both a partial and full pallet of a particular batch of a material in the source warehouse, the full pallet will always be proposed in the TO, before the partial pallet. Is there a way of forcing the selection of a partial pallet before the full pallet?Removal of material based on quantities could be driven by using picking strategy 'M'. This is closest option that I could think of that matches your requirement. If this does not meet your requirements then you may have use a custom picking strategy via exit MWMTO004.
-
Putaway Strategy for replenishment of fixed bins - SU destination bin
My client is using ECC 6.0 Retail and using WM.
After creating the TR for the replenishment of the fixed bins according to the bin situtation using LP21, we create TOs using LB11 for article. At the TO creation, the system creates a new Quant and automatically proposes the SU# from the source bin to the destination bin. We allow addition to stock but not mixed SUs. However you can manually overwrite and input the current SU destination bin but this is very time consuming. Is there a way to have this process done automatically?
Thanks GaetanHi Gaetan,
It seems this topic is extremly important recently...e.g.:
Addition to storage unit
I'm not aware of anything in standard SAP that would help you to realize your scenario. (if it is very important maybe it should be indicated to SAP AG. However, in a WH where SU management is active the material flow is realized trough SUs > if warehouse workers add the stock physically from one SU to other SU it means additional work for them physically and therefore in SAP too).
Regards,
Csaba -
hi all,
Each time a goods receipt is posted for material ABC, you want to move the material directly to
the fixed storage bin FIX-ABC in storage type 005 of warehouse number 001 without creating a
transfer requirement or transfer order. To do this, you need to set up the system as follows:
1. Create the fixed storage bin FIX-ABC in storage type 005 that is defined in the standard
system using the fixed bin search strategy. (See Stock Placement Strategy F: Fixed Storage
Bin [Page 359])
2. Create a special movement indicator for your warehouse number.
3. Add the special movement indicator and the fixed storage bin FIX-ABC to the material master
for material ABC. (Be sure to enter storage type 005 in the organizational level dialog box
when creating the material master).
4. Create a new WM movement type to move materials directly into fixed storage bins without
creating transfer orders or transfer requirements.
5. In the reference movement type table, create a new entry that links an appropriate IM
movement type to the new movement type using the special movement indicator.
i follow the above all the steps but the stock not moved to my fixed bin (005),instead of that its moved to shelf storage bin(002) . plz,try to solve my problem.
Appreciate your help as always.
regards
muthuraman.dHi
In the configuration for st type search strategies you can create a st type indicator (maybe FIX)
In the placement (E) you can add this indicator to your warehouse and in the table add 005 st type only which means if the system sees this indicator it has to go to 005
Finally in the WM1 view of the material master add the FIX in the stock placement field and then every time the material arrives it should look at the FIX nd then go to the search strategy and see that it goes to 005.
If you have lots of material for this strategy then when you have done the config use MM17 to update all of the materials with FIX.
I hope that this helps
Frenchy. -
Fixed bins to be defined in a storage type
I have multiple materials in a storage type in which some of the bins need to be assigned as fixed bins and some of them not. Is this possible ? I have a requirement to use the fixed bins to be replenished from High rack.If this is not possible then I need to create so many sections to make sure each material need to be putaway in one assigned bin for that material.
Any ideas?PutAway and Picking Strategies are determined at Storage Type level.
So you can only have one strategy per Storage Type : either FIXED BINS or another strategy.
One Storage type does not have to be BINs next to one another.....
In the same physical space you can have two storage types where some BINs are Fixed Bins in one Storage Type and some BINs are not fixed Bins in the other Storage Type....that is one possibility.
If that is not possible, then I would look at having a PutAway and Picking Strategies that are so restrictive for each material that they have to go to a specific BIN .
Those are only a few ideas, it really depends on what your constraints are, how many materials are concerned, etc....
And finally, there is the user-exit option.....
Edited by: AGagnon on Aug 11, 2010 11:31 PM -
Hello all,
I would like to know wats the use of fixed bin? How to create a fixed bin does all the bin that come under fixed storage type are called as fixed bin? Is it possible to have multiple materials in one fixed bin? Wats the exact purpose of having a fixed bin pl. post any documents/links related to fixed bin
Thanks,
MaxxI would like to know wats the use of fixed bin? - Fixed bin is one of the putaway and picking strategy in warehouse management. When you have one material which is always going to one particualr bin in that case you can assign fixed for that material in particular storage type which has Fixed bin stretagy.
How to create a fixed bin does all the bin that come under fixed storage type are called as fixed bin?
It is normal Bin creation process using LS01N or LS05 (automatic).
Fixed bin is defined at storage type level so all the storage bin is created for that storage type will have fixed storage bin.
Is it possible to have multiple materials in one fixed bin? Yes, possible
Wats the exact purpose of having a fixed bin pl. post any documents/links related to fixed bin
as explained above -
Hi,
We are planning to use lean WM for our business with fixed bins.Do we need to create storage sections in order to be able to create the fixed bins in the warehouse?if not how do we create the fixed bin .Where do we assign the fixed bins in the material master?Is it in the WM2 view?
best regards
SupratimHi,
When you implement the Warehouse Management System (WMS), you manage goods movements and stock changes in the warehouse at storage bin level. However, if you implement Lean WM, inventory management takes place solely at storage location level. The system does not update the stock data at storage bin level using the quants.
Since Lean WM does not update stocks at storage bin level, you can display the stock quantities solely in Inventory Management (IM) and not with the stock overview function in WM. Also, you cannot process possible stock differences that occur in the warehouse using Lean WM, only using Inventory Management (MM-IM):
Hope I cleared you. Please reward.
Regards,
Archit -
Dear Experts,
I am using a putaway method of fixed bin.I have defined the fixed bin in the material master. I will be using capacity check # 3 (max quantity of bin).
Now, during putaway say the fixed bin is full,
1. Is it possible that the system moves the qty to the next empty bin within my fixed bin storage type or does it always putaway the qty into the overflow area defined as the 2nd entry in my storage type search table? Can i influence this with any specifc user exits?
2. if my putaway qty is 5 cases. Say in my fixed bin, current stock is 4 1/2 cases. During putaway in this scenario, system will suggest to putaway 1/2 case into the fixed bin and the remaining 4 1/2 into a different area? The recieveing clerk will not want to break open the case into 1/2 cases. How do i resolve this?
ThanksHi,
Please not that capacity check (1-3) is at quant level: For inspection method 3, the Quants of the corresponding material are putaway to a maximum of this quantity. For the above-mentioned reasons, it also applies here that the mixed storage should not be allowed.
Refer OSS Note 392776 for more information.
For your 1st question: I think its better to have Near picking bin as the 2nd entry in your storage type search table.
For your 2nd question: Using Inspection method 3, a different bin will be proposed as the check is in quant level.
Regards
Deepak -
Sap wms fixed bin replenishment
hi experts,
i am creating fixed bin replenishment the max bin qty 40, min 10 and replenishment qty 50
and i try to create LP21 fil the fields the whno storage type and bin and executed but the replenishment is not happened . the automatic TR also not triggering so plz tell me where is the setting we needHi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock = 10
Maximum stock = 100
Replenishment qty = 40
Storage bin stock = 5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh -
One t.o. fixed bin replenishment
Hello, and good day
I have a question about replenishing fixed bins. We currenty use two step with TR-TO mirror TR-TO creation automated via batch job and it's working fine. The issue is that the replenishments are slowed to much waiting for the second t.o. that brings the stock to the fixed picking bin.
My question: is one step replenishment a standard SAP function and please guide me on the steps to implement if so.
Or provide me with any links or documentation on the process please, So far I have only been able to find info on the two step process, I have only seen some posts mentioning movement 320 for this but it wasn't clear to me if there where specificaly refering to a one step replenishment.
When I say one step I mean to say only one transfer order - source = genaral storage - destination = fixed bin
user in genaral storage can view the t.o. for source bin and do the physical move then another user access the same t.o. and confirm when the stock is placed into the fixed bin, so in practice it's still a two step but in the system user only needs one t.o.
we have WM active obvHi
Reason for error message "LP301- no material relevant for stock replenishment found" is because the below statement fails to find the record from table MLGT on the set criteria, Looks like there is a mismatch in the LP21 selection entry screen (Plant, warehouse , fixed bin storage type, requirement number, requirement type) and master data which you defined. check the entry on the selection screen
or the another way to check is goto SE11 enter table MLGT
on the selection screen pass the warehouse number, Pickface storage type(005) and execute, check whether system is giving you any result or not
Make sure the material is extended for pick face storage type
fixed bin is defined in the material master WM2 view, the bin should be from pickface storage type 005 -
Reg Storage location control when pulled materials via fixed bin replenishm
We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
Please helpPlease help
Bin to Bin is working fine as per storage location control functionality set-up
We have issue with fixed bin replenishment combined with storage location control
Please share your inputs, Thank you
While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM -
Moving Stock Directly to a Fixed Bin using a Special Movement Indicator
I am trying to set up moving stocks directly to fixed bin using special movement indicator.
Found the below in SAP documentation:
==========
Each time a goods receipt is posted for material ABC, you want to move the material directly to storage bin FIX-ABC in storage type 005 of warehouse number 001 without creating a transfer requirement or transfer order. To do this, you need to set up the system as follows:
1. Create the fixed bin FIX-ABC in storage type 005 that is defined in the standard system using the fixed bin search strategy.
2. Create a special movement indicator for your warehouse number.
3. Add the special movement indicator and the fixed bin FIX-ABC to the material master for material ABC.
4. Create a new WM movement type to move materials directly into fixed bins without creating transfer orders or transfer requirements.
5. In the reference movement type table, create a new entry that links an appropriate IM movement type to the new movement type using the special movement indicator.
==============
I have completed the steps 1 to 4. I am not sure of step 5 in IMG. Can some one please give me the menupath and guide me?
Appreciate your help as always.
Regards,
SadanandHello,
You can go to LE-WM-interfaces-Inventory management-Define movement types-
a) Assign WM Movement Type References to IM Movement Types - here you can assign your IM mvt to WM mvt
b) then LE-WM Interface to Inventory Management - here you can assign the ref movement type assigned in 1 above to the actual WM movement type you want to carry out and you can assign your special movement indicator here as well.
So this will be
<WH No.> <ref. mvt say 101> <mvt indicator say B ( for PO)> <spl mvt indicator that you have created> <Wm mvt type> <TR creation - X or A > <Immediate To creation X or A >
Thanks,
Maybe you are looking for
-
ITunes 9.2.1 will not run.
Currently running OS X 10.5.8 I downloaded and installed the latest iTunes update (9.2.1). It worked ok for a few days, then simply stopped working. Now, when I attempt to open it, I get an error message Process: iTunes [400] Path: /Applications/iTun
-
Copy and Paste images to Word using Adobe Flex3
I am trying to copy the images from Adobe Flex 3 application and paste it in the Microsoft Word or PowerPoint. I couldn't find any examples online. I am not sure whether I could do this using Adobe Flex3. I know this is possible with Adobe AIR. Could
-
Hi, Here is my problem : I have a table A in the schema A. In another schema, schema B, I have a view (VIEW B) based on the table A . My application schema for Olite is schema C. I want all my CEQ$ and CVR$ and CLG$ ables to be in schema C. I created
-
Customized steps in ChaRM workflow
Hello SolMan Gurus, I am in a project implementing Change Request Management in Solution Manager. Now my client wants to add an additional customized step in the standard process flow. Let me explain in detail. When a change request has been created,
-
PowerBook G4 667 MHz 512 MB: Why can't I run Mac OS X 10.4 on the unit?
Hi all, This is my first post so please bear with me: - I tried to do an erase and install to load OS 10.4.3. Everything gets installed properly. - When the system comes back online it will function properly for a bit and then hang with the screen st