Fixed header working fine for desktop but not for windows phone

I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
.header{
z-index: 3001;
position:fixed;
top:0px;left:0px;
background-color: white;
width:100%;height:150px;
This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
not visible but they are working if u manage to click at the exact place. Any fix for this?
I want to add that this problem is coming only in windows phone. So need fix for that.

Hi User1508372,
The
Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
Windows 8).
The folks in the
Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
--Rob

Similar Messages

  • Router works for desktop, but not for surrounding laptops.

    The router I have is the Linksys E1000. I bought it and hooked it up yesterday and works great for my desktop but not for my daughters laptop. Her laptop has wireless automatic internet recognitions which allows her to pick up surrounding internet networks. We cannot figure out how to make this work. Please help!

    Are you able to see your router's network  name on your laptop? If yes, then follow the below mentioned settings.
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Tbird will not send. unnown error. works in safe mode. turned off firewall and still does not work. works fine on desktop but not laptop

    cannot send on laptop. desktop, with same settings, works fine. getting unknown error on send. please help. here is the setup from the help function.
    thanks,
    tim
    WARNING:
    This contains sensitive information which shouldn't be forwarded or published without permission.
    Application Basics
    Name: Thunderbird
    Version: 31.4.0
    User Agent: Mozilla/5.0 (Windows NT 5.1; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
    Profile Folder: C:\Documents and Settings\Tim\Application Data\Thunderbird\Profiles\dhtmqpol.default
    (Local drive)
    Application Build ID: 20150109111741
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Memory Use: about:memory
    Mail and News Accounts
    account1:
    INCOMING: account1, Tim Corey, (imap) imap.gmail.com:993, SSL, passwordCleartext
    OUTGOING: smtp.gmail.com:465, SSL, passwordCleartext, true
    account2:
    INCOMING: account2, Local Folders, (none) Local Folders, plain, passwordCleartext
    Crash Reports
    Extensions
    Important Modified Preferences
    Name: Value
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size_cached_value: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    extensions.lastAppVersion: 31.4.0
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d10: 3
    gfx.blacklist.layers.direct3d10-1: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.layers.opengl: 3
    gfx.blacklist.stagefright: 3
    gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
    gfx.blacklist.webgl.angle: 3
    gfx.blacklist.webgl.msaa: 3
    gfx.blacklist.webgl.opengl: 3
    mail.openMessageBehavior.version: 1
    mailnews.database.global.datastore.id: 7bba5461-432a-473f-a4e4-9a009dfee73
    mailnews.database.global.indexer.enabled: false
    network.cookie.cookieBehavior: 2
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1375374210
    places.history.expiration.transient_current_max_pages: 78086
    plugin.importedState: true
    privacy.donottrackheader.enabled: true
    Graphics
    Adapter Description: Mobile Intel(R) 945 Express Chipset Family
    Vendor ID: 0x8086
    Device ID: 0x27ae
    Adapter RAM: Unknown
    Adapter Drivers: igxprd32
    Driver Version: 6.14.10.4926
    Driver Date: 2-15-2008
    WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    AzureCanvasBackend: skia
    AzureSkiaAccelerated: 0
    AzureFallbackCanvasBackend: cairo
    AzureContentBackend: cairo
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 0
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use
    NSPR
    4.10.6
    4.10.6
    NSS
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS Util
    3.16.2.3
    3.16.2.3
    NSS SSL
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS S/MIME
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC

    Thanks for the reply. here is the behavior for all steps:
    1. use oper. system safe mode: it works, I can send email
    2. no oper. sys. safe mode, t'bird safe mode: cannot send mail
    3. no oper. sys safe mode, no t'bird safe mode, all addons disabled: cannot send mail.
    It only works when i use oper. sys. safe mode.
    Addons for t'bird were enabled in this test.
    (Not using T'bird safe mode either in this test.)
    Use BitDefender antivirus, which does not have a setting to turn on/off email scanning. Should I contact BD support? (it seems to point to BD as causing the problem. Interesting that I don't have this problem on 2 other desktops, only the laptop. And in the past, T'bird worked on the laptop. I have tried uninstall and reinstall, but mozilla is SAVING all my account and other info, so I cannot do a clean install. it seems to me that if I could do a clean install, it might work. Any idea how to remove all the data and uninstall?
    thanks,
    tim

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • Password works for login but not for the Adobe CC Desktop application

    Password works for login but not for the Adobe CC Desktop application

    Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    ou can try deleting OPM.DB from steps below and try again.
    Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
    Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder.  To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
    3) update to the latest version of the Creative Cloud app.
    Also we would like few more details:
    When has this issue started occurring, was this after installation of any specific adobe product.
    On which platform are you seeing this.
    Also we would like to know if after above steps this issue occurs ever again in future.
    You can refer to http://forums.adobe.com/thread/1239510
    Regards,
    Rajshree

  • Table of Contents page numbers works for PDF but not for other formats

    Hi,
    I followed exactly was indicated here regarding creation of TOC.
    http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
    The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
    (HTML and XLS are understandably not paginated in nature but why not in RTF?)
    Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
    What am I doing wrong?
    Regards,
    Jarell
    Edited by: Jarell on Jan 11, 2012 8:08 PM

    Hi Kavipriya,
    What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
    You may use any xml because the template does not use any dynamic binding of values.
    The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
    So the end result should be (PDF result from BI Publisher):
    First TOC Item .................. 1
    Second TOC Item ............. 2
    But for RTF it outputs:
    First TOC Item .................. 0
    Second TOC Item ............. 0
    And after doing Print Preview (once or twice)
    First TOC Item .................. Error in Bookmark
    Second TOC Item ............. Error in Bookmark
    Hope this is detailed enough to illustrate the problem.
    Edited by: Jarell on Jan 17, 2012 10:24 PM

  • Scrolling Header works in Visual Studio but not on Report Server 2008

    2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
    set correctly. Any suggestions?
    Help appreciated! 
    Linda

    Hi Linda,
    As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
    If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
    HTH,
    Ram
    Please vote as helpful or mark as answer, if it helps

  • I have iPhone4. It has been working fine. I have not rebooted my phone lately, so I just deleted a few apps and thought I would do a soft reboot. I held down sleep button and home button. It shut down and apple logo came up but phone will not come back.

    I have iPhone4. It has been working fine. I have not rebooted my phone lately, so I just deleted a few apps and thought I would do a soft reboot. I held down sleep button and home button. It shut down and apple logo came up as it has before, but it has been about 25 minutes and phone has not come back up. What's going on? Help!

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • TS3274 Getting sound for music, but not for game apps.  Checked settings and sound is on.  Any suggestions.

    My volume controls work and getting sound for music but not for game apps.  I did check settings and sound is turned on under notifications and in the app.  Any help would be appreciated

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • Query working fine in toad but not in forms 6i

    i have following coding on when button press triger
    declare
    CURSOR C1(year number,month number) IS
    SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
    FROM
    select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
    select prod_no,sum(xaq)*1 xaq
    from
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_01_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_02_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_03_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_04_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    group by prod_no
    ) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
    where ci.itm_no=a.prod_no
    and ci.itm_no=c02.itm_no
    and c01.grp_id=c02.grp_id
    and c01.grp_id in(55,56,57,58,59)
    and vpg.prod_no =ci.itm_no
    and vpg.group_id=cpg.group_id
    where XAQ <>0;
    Begin
         delete from fiaz.tmp_topten_prod;
         for i in c1(:year,:month)
    loop
              insert into fiaz.tmp_topten_prod
              values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
         end loop;      
    standard.commit;
    message('inserted in temp');
         exception when others then
              message (dbms_error_text);
              message (dbms_error_text);
    End;
    Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
    i guess union clause is not working in this situation...
    plz suggest me the appropriate changes in the query to work well from form as well...
    combination:Forms 6i,Oracle 8.0.6
    Regards,
    Usman Afzal

    As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
    create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
    begin
    delete from fiaz.tmp_topten_prod;
    insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
    SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
    FROM
    select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
    select prod_no,sum(xaq) xaq
    from
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_02_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_03_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_04_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    group by prod_no
    ) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
    where ci.itm_no=a.prod_no
    and ci.itm_no=c02.itm_no
    and c01.grp_id=c02.grp_id
    and c01.grp_id in(55,56,57,58,59)
    and vpg.prod_no =ci.itm_no
    and vpg.group_id=cpg.group_id
    where XAQ <>0;
    commit;
    end;
    Error:
    "PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
    i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
    Now where is the problemmmmm
    Plz Help

  • Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

    Learning with Lynda.com!
    Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
    I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
    I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
    Thanks!

    Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

  • Linked server works for sa but not for user

    I have a linked server to an Oracle database. It works fine for me logged in as DBA but not for the user. The linked server uses the same account regardless of who's using it.
    When the user tries it the following error is thrown:
    Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server
    I have granted public access to MSDB and execute on the xp_prop_oledb_provider object to the user.

    this link should give all the connection string to sql server
    http://www.connectionstrings.com/sql-server/
    but can you verify if your application is really using that connection file ? try running trace alongside and try to connect to the database.. so do you atleast see  a call from this config file with username - myapplication??
    Hope it Helps!!

  • Apple TV working fine with Wireless, but not on Ethernet

    I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
    It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
    I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
    I even upgrade to firmware 2.01

    Thanks for your help guys
    I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda.

  • ITunes/Apple Mobile Device works fine w/iPod but not iPad

    Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
    EDIT:
    Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

    The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
    Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
    Are you able to restart the service after following the steps in that article?

Maybe you are looking for