Fixed number of rows
hi,
all.
i wnt to dispaly only fixed no of row in output but there mayee to more record in internal table .how can i do that
suppose i want to dispaly only 10 record in output but there maye be more that 10 record in inetrnal table,we will
not fixe in selection query,how we will do that.
Hi,
Use a counter and move the fixed number of records to another internal table and display it.
loop at itab.
count = count + 1.
move-corresponding itab to itab1.
append itab1.
if count > 10.
exit.
endif.
endloop.
Now use itab1 to display the output.
Regards,
Vikranth
Similar Messages
-
Create spreadsheet file with a fixed number of rows
What is the most straight forward way to create a series of spreadsheet files each with a new file name and fixed number of rows. We have a data acquisition process that creates a new 1D array every 2 seconds. We'd like to build a series of spreadsheet files each having two hours or 3600 rows of data. Is there a best way to do this in LV9?
johnUse the low-level FileI/O Vis with Write to Text File.vi where you open a new file with every N iteration like this:
You just have to convert your 1D Array to string before.
If you would like to have a new file every N hours you should create a FGV which checks the elapsed time using Get Date/Time in Seconds.vi, which is more appropriate for longtime applications.
Christian -
How to show a fixed number of rows in JTable
Hi,
I have to show only a fixed number of rows in the table .
After scrolling number of rows must not be changed.I don't understand the question.
The number of visible rows is dependent on the size of the scroll pane.
Scrolling does not change the number of rows that are visible. -
How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID
Hy experts
How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID?? lets say 500 ?? because my display table it may contain in some cases 10.000 and evidently I can t see all of them..
I have a button in my toolbar witch triggers this event
(display 500 records ) but I don t have the logic to do this only with methods of CL_GUI_ALV_GRID.
can you tell me a standard method of CL_GUI_ALV_GRID witch can help me do this?? any hint will be good..
Till now I was used to add a column to my structure witch represents a flag that is a number corresponding to every 500 records (a batch containing 500 records )
first 500 - flag -> 1
second 500 - flag -> 2
etc..but I m convinced that exists a way of doing this more easy..without damaging my structure..
thanx in advance..don t be shy..reply if you have any hints..Hi,
if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
case counter.
when 1.
loop at int_table1 from 1 to 500. "<-- your table with all records
move int_table1 to int_table2
endloop.
when 2.
loop at int_table1 from 501 to 1000.
move int_table1 to int_table2
endloop.
etc, etc.
Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
exporting
IT_OUTTAB = int_table2 "<-- instead of your currently table int_table1 -
Fixed number of rows in ADF table
Can we specify fixed number of rows for ADF table so even no rows displayed it will still show 10 empty rows.
the rangesize property determines how many rows will be displayed and controls paging. If there are no rows to begin with (if I understand the question correctly) rangesize won't have any effect.
-
How to display fixed number of rows on rtf file
Hi everyone,
I have the following requirement. The pdf output should have fixed number of 33 lines in a group by. The rows in group by can vary for each group . For eg: If a group has 3 rows , the pdf output should print 3 lines and 30 empty lines, and if group has 2 lines, the out put should print 31 emty lines.
can anyone please help me with this requirement?
Thanks
SunnyTake a look at this blog post: http://blogs.oracle.com/xmlpublisher/entry/anatomy_of_a_template_i_fixed
Thanks,
Bipuser -
How to Efficiently Sample a Fixed Number of Rows
Good afternoon. I need to select a specific number of random rows from a table, and while I believe my logic is right it's taking too long, 30 minutes for a routine data size. Hopefully someone here can show me a more efficient query. I've seen the SAMPLE function, but it just randomly selects rows on a one-by-one basis, without a guaranteed total count.
This is the idea:
INSERT INTO Tmp_Table (Value, Sequence) SELECT Value FROM Perm_Table, DBMS_RANDOM.VALUE;
SELECT Value FROM Tmp_Table WHERE ROWNUM <= 1234 ORDER BY Sequence;I'd need to put the ORDER BY in a subselect for ROWNUM to work correctly, but anyway that's just an illustration. My actual need is a little more complicated. I have many sets of data; each set has many rows; and for each set I need to return a specific (different) number of rows. Perhaps project A has three rows in this table, and I want to keep two of them; project B has two rows, and I want to keep one of them. So I need to identify, for each row, whether it's valid for that project. This is what my data looks like:
Project Person Sequence Position Keeper
A Bill 1234 1 Yes
A Fred 5678 3 No
A George 1927 2 Yes
B April 5784 2 No
B Janice 2691 1 YesI populate Sequence with random values, then calculate the position of each person within their project, and finally discard people who's Position is greater than Max_Targets for the Project. Fred and April have the highest random numbers, so they're cut. It's not the case that I'm just trimming one person from each project; the actual percentage kept will range from zero to 100.
Populating the list with random values is not time-consuming, but calculating Position is. This is my code:
UPDATE Tmp_Targets T1
SET Position =
SELECT
COUNT(*)
FROM
Perm_Targets PT1
INNER JOIN Perm_Targets PT2 ON PT1.Project = PT2.Project
INNER JOIN Tmp_Targets T2 ON PT2.Target = T2.Target
WHERE
T1.Target = PT1.Target
AND T2.Sequence <= T1.Sequence
);The Target fields are PKs, and the Project and Sequence fields are indexed. Is there a better way to approach this? I could write a cursor that pulls out project codes and performs the above operations for each project in turn; that would be logically simpler and possibly faster. Has anyone here addressed a similar problem before? I'd appreciate any ideas.
This is on 9.2, in case it matters. Thank you,
JonathanYou've not given any indication of how max targets for a given project is determined, so for my example I'm using the ceiling of 1/2 of the number of records in each project which gives the same number of yes and no responses per project as you had:
with dta as (
select 'A' project, 'Bill' person from dual union all
select 'A', 'Fred' from dual union all
select 'A', 'George' from dual union all
select 'B', 'April' from dual union all
select 'B', 'Janice' from dual
), t1 as (
select project
, person
, row_number() over (partition by project order by dbms_random.value) ord
, count(*) over (partition by project) cnt
, rownum rn
from dta
select project
, person
, ord
, cnt
, case when ord <= ceil(cnt/2) then 'Yes' else 'No' end keep
from t1
order by rn
PROJECT PERSON ORD CNT KEEP
A Bill 2 3 Yes
A Fred 3 3 No
A George 1 3 Yes
B April 1 2 Yes
B Janice 2 2 No
5 rows selectedIn this example I use an analytic function to assign a random ordering for each record within a project in the middle query, in the final output query I am determining the yes no status based on the order within a project and the count of records in the project. If you had a table of projects indicating the thresh hold you could join to that and use the thresh hold in place of the ceil(cnt/2) portion of my inequality in the case statement. -
How can I get a fixed number of rows on a SELECT?
I'm interested on get the last xx records of one specific query that returns an higher number of rows than xx. How can I do this?
you can use "where rownum < xx" if you
write "select * from (select ... from ... order by ...) where rownum < 10"
but you can't write "rownum > 10" because no record will be returned.
therefor you have to do like this:
select * from (select ..., rownum as nummer from (select ... from ... order by ...)) where nummer > 10
~
pascal -
3 queries, how to make it fixed number of rows
Hi. I have the 3 queries with the following structure. Q1 customer, Q2 sales order, Q3 lines in the sales orders
Q1
Q2
Q3
Q3
Q2
Q1
I followed the one suggested in thread: Can you limit returned rows in a loop?
regarding value for each text form field as follows
text1 = <xsl:variable name="lpp" select="number(5)"/>
text2 = <?for-each@section:LIST?> <xsl:variable xdofo:ctx="incontext" name="group" select=".//LINES"/>
<?for-each:$group?><?if:(position()-1) mod $lpp=0?><xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
text3 = <?for-each:$group?><?if:position()>=$start and position()<$start+$lpp?>
text4 = <?LINE?>
text5 = <?end if?><?end for-each?>
text6 = <?sum($group[(position()>=$start) and (position()<($start+$lpp))]/LINE)?>
text7 = <?if:not(count($group) mod $lpp=0) and ($start+$lpp>count($group))?>
text8 = <?end if?><?end for-each?><?end if?>
text9 = <?if:count($group)<$start+$lpp?>
text10 = <?end if?>
text11 = <xsl:if xdofo:ctx="inblock" test="$start+$lpp<=count($group)"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if>
text12 = <?end if?><?end for-each?><?end for-each?>
and it worked for me if i have only 2 queries. but now when im using it in 3 queries. how to apply the said format in involving 3 queries?
Thanks.Hi,
if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
case counter.
when 1.
loop at int_table1 from 1 to 500. "<-- your table with all records
move int_table1 to int_table2
endloop.
when 2.
loop at int_table1 from 501 to 1000.
move int_table1 to int_table2
endloop.
etc, etc.
Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
exporting
IT_OUTTAB = int_table2 "<-- instead of your currently table int_table1 -
Getting a fixed number of rows from various items
Hello,
I am new to Oracle and I am having a hard time resolving this problem. I will try to explain as best as possible.
The application requires that I build a list of items that have been shipped. As they may have various shipping companies, there may be various tracking numbers for each item shipped. The application requires that I get a list of the items that have been shipped that meet certain criteria, then for each item, list the first three tracking numbers that are found. If the shipped item has more than three tracking numbers, the others beyond the third are ignored. I built a SELECT statement using the rownum "column" to limit my result set to a maximum of three. My intention was to build a list of
item ids, then pass those to a stored procedure, then loop for each item id, getting the first three tracking numbers. The tracking numbers returned would be appended to a cursor, which would return the entire set of tracking numbers for the list of item ids.
Any recommendations as to how to approach this requirement would be greatly appreciated. I have gotten through the SELECT that returns the list of item ids. I am having trouble finding the correct approach to getting the three tracking numbers for each item id. One solution was to have the application cycle through each
item id, but I am hoping that this can be done within the stored procedure so that it is called only once for the returned list of item ids.
I wish to thank you in advance. This is all the information I can provide, as I don't have any DDL statements. I hope it will suffice.
Salvador
nullPlease see if you can use something like this:
SELECT a.item, a.tracking_number
FROM table_name a
WHERE 3 >=
(SELECT COUNT (*) + 1
FROM table_name b
WHERE a.item = b.item
AND b.ROWID < a.ROWID
AND b.criteria = 'whatever')
AND a.criteria = 'whatever'
ORDER BY a.item, a.tracking_number
For example, if you have a table named items_shipped that has columns named item, tracking_num, and shipped, and you want all the items that meet the criteria that shipped = 'Y' and the first three tracking_nums for those items, then your query would look something like this:
SELECT a.item, a.tracking_num
FROM items_shipped a
WHERE 3 >=
(SELECT COUNT (*) + 1
FROM items_shipped b
WHERE a.item = b.item
AND b.ROWID < a.ROWID
AND b.shipped = 'Y')
AND a.shipped = 'Y'
ORDER BY a.item, a.tracking_num
You have given very limited information. If the above suggestions are not sufficient, please provide your table structure, including table names, column names, data types and lengths, some sample data, what criteria must be met, and a sample of what you would like the output to be.
null -
Displaying page total on a page with fixed number of lines
Hi ,
My requirement is to have a fixed number of rows per page (say 20) and to have a page total beneath the table containing the data.I am using a RTF template.The columns in the table are
Order
Amount
Page Total : 3000
For including a page-break after 20 lines, i have added the following code.
For - each ______________
<?if:position() mod 20 =0?> <xsl:attribute name="break-before">page</xsl:attribute> <?end if?>
end - for_______________
This limits the no of rows per page to 20.
I have tried 2 ways to display the page total but both don't seem to work Can someone please point what i am missing here?
1) Using add and show-page-total
I added the code (<?add-page-total:at;'Amount'?> to the Amount data column in the template and then used the <?show-page-total:at?> in the page total data column to display the total. But this doesnt work.It doesnt display any value.
2) Using Variables:
I declared a variable (<?xdoxslt:set_variable($_XDOCTX, 'RTotalVar', 0)?>) before the table. Then, i used the (<?xdoxslt:set_variable($_XDOCTX, 'RTotalVar', xdoxslt:get_variable($_XDOCTX,'RTotalVar') +Amount)?>) in the Amount data column to calculate the sum. I then used <?if:position() mod 20 =0?> <?xdoxslt:get_variable($_XDOCTX, 'RTotalVar')?><?end if?> in the data column of the page total. But this doesnt work. The variable loses its value when it is displayed outside the table. Why is it so? How can i declare a global variable? I am not sure why the variable loses it value when taken out of the table. I would want it hold the value through out the document. Is my understanding correct?
Kindly help me with this issue.
Thanks,
VidhyaHi
I have the same issue. could anyone provide the link or template. I searched in the forums but couldnt find related to this post.
please help
Thanks -
Printing fixed number of Invoice Line in rtf template with level two group
Hi,
I have to print fixed number of invoice lines on a page. Invoce tempalte design has a table with header and summary(Invoice , tax and shiping totals) at each page in table footer. The table should repeate at each page with header and footer. I need to print specific number of rows or number of rows wihich page can accumulate in table body on each page.
I checked few blogs giving solution for fixed number of rows printing say
"Anatomy of a Template I - Fixed Row Enumeration"(http://blogs.oracle.com/xmlpublisher/2007/03/27/)
and
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Above two blogs explanation has only one group at line level. but in my case there are two groups (Parent and child) at line level. I am able to count rows in parent group but it is not counting lines in child group.
Edited by: Bhanu Yadav on Apr 19, 2011 2:10 AMWill it be possible for you to move the 1st and 3rd sections to header/footer?
So that if the 2nd section spills over to next page too, starting position of 3rd section wont be affected. -
I have used pagination to display the report data.I have used page break.I want to display 10 records on first page and from second page onwards I want to display 25 records on all remaining pages.
I followed this link to show 25 records for all page. "http://www.sqlchick.com/entries/2010/9/11/displaying-fixed-number-of-rows-per-ssrs-report-page.html". Now suggest me how display 10 records only on first page having 25 from second page onwards.Hi mukesh_harkhani,
According to your description, you want to insert page break for different number of rows, display 10 rows on the first page and 25 rows on the following pages. After testing the issue in my SQL Server Reporting Services 2008 environment, we can use the
method below to achieve your requirement:
In your scenario, right-click the group which contains the expression: =CEILING(RowNumber(Nothing)/25) to open the Group Properties dialog box.
Modify the original expression to the following in the Group on textbox:
=Floor((RowNumber(Nothing)+14)/25)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Displayin message and fixing the number of rows in a table
Hi Experts,
I have a requirement like this
there is a table, where i need to diplay a message when there are no records and no rows should be visible on that table.
Also, when the records are populated from the context, i need to fix the number of rows in that table and display the records.
Please let me know hw this can be achieved.
Also in the table I have Link to URL, please let me know how to handle this reference, when i set the reference Property, its giving me an error stating that the file doesn't exist when the table gets loaded.
Thanks in Advance
Regards,
PalaniHi
Oh!! You should to explain it at first thread itself that you want to display a JPG imange or other WDWebResourceTypetaken form the backend.
1. So this is not at all a URL
2. You have to convert binary data to WDWebResource then display it in either Image UI element or other (like PDF , txt etc)
3
try
// Read the datasource of the FileUpload
IWDResource res = wdContext.currentContextElement().getResource();
InputStream in = res.read(false);
ByteArrayOutputStream bOut = new ByteArrayOutputStream();
int length;
byte[] part = new byte[10 * 1024];
while ((length = in.read(part)) != -1)
bOut.write(part, 0, length);
in.close();
bOut.close();
IPrivateUploadCompView.IImageTableElement ele = wdContext.nodeImageTable().createImageTableElement();
ele.setImage(wdContext.currentContextElement().getResource().getUrl(0));
ele.setText(res.getResourceName());
wdContext.nodeImageTable().addElement(ele);
catch (Exception e)
wdComponentAPI.getMessageManager().reportWarning(e.toString());
Here I assume that you convert that data to IWDResource type or
4.
WDWebResource.getWebResource(wdContext.currentContextElement().getresource(), type);
// getResource of type binary which u read from BAPI and set it in local context , type is MIMETYPE or hardcode it as "JPG"
5. Further help
[Help1|To Displayan Image in Webdynpro Java from Standard Function Module;
[Help2|http://wiki.sdn.sap.com/wiki/display/KMC/GettinganimagefromKMDocumentstobeusedinWeb+Dynpro]
[Help3|http://wiki.sdn.sap.com/wiki/display/KMC/GettinganimagefromKMDocumenttobeusedinWeb+DynPro]
It might code look strange at first , please do some reserch in SDN ,I did my best at this level.
Best Regards
Satish Kumar -
Select a fixed number of random rows
Hi,
I just would like to select a fixed number of random rows from a table. That is, I would like to get 5 rows, without specifying the row_id, and the selected rows should "always" be different. Just as picking 5 balls out of a big box (which is filled with many balls).
Is there a way to easily put it into one sql statement or do I have to write a workaround in the programming language I use?
Thanks a lot in advance,
CQAskTom has a discussion on this:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:6075151195522
Note that it requires that you
1) Generate a random number for every row in the table
2) Sort the table by those random numbers
which is a significant performance hit if the table is large.
Justin
Maybe you are looking for
-
How do I make Flash use the original Photoshop file, not a .png one?
Hi, this might be kind of a basic question/problem but I can't seem get Google to help me. Since I've recently started out with Flash, I guess I just missed some newbie thing out, still very greatful for help though, since this'll soon be causing a b
-
What are QTKitServer and osascript and why do they cause errors?
Hi- I'm running 10.6.8 on an iMac. I get this all day long when I use safari: 11/8/12 9:32:23 AM QTKitServer[415] Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacO
-
is there a way of connecting my G5 to my MBP so that I can switch between screens on MBP? as i want to get rid of the crt monitor. it gives me headaches...
-
ORA-00939 when creating XML table with Virtual Columns
Getting error on creating table with VIRTUAL COLUMNS: Error at Command Line:4 Column:31 Error report: SQL Error: ORA-00939: too many arguments for function 00939. 00000 - "too many arguments for function" Without VIRTUAL COLUMNS works fine. Where to
-
Can you pull video off of a CD and use in imovie?
I want to burn all my dad's home movies on to a CD disk and later pull clips off for iMovie. Is this possible?