Flag for overriding TV zoom function? Or title-safe settings for zoomed video...

Here's the problem: I've got SD spots with correctly set up title-safe graphics. However, I keep seeing the spots playing on HD TV's where the picture has been set to zoom/stretch, and consequently the title graphics are stretching off-screen.
So the question's actually a two-parter: Is there a flag I can set in my video that will override an HD set's zoom function and force my spots to play unstretched on these TV's? Or (part two), what graphics boundary settings would I have to use to keep my title graphics on-screen even it the video is zoomed?
Regarding part two, yeah, I could experiment and find out the settings that will work, but I figure someone's run into this before and has an answer, which would save me a bunch of time...
Thanks in advance...

Is there a flag I can set in my video that will override an HD set's zoom function
Thank God, no! It's bad enough that disk authors can take away our right to skip FBI warnings and all the other BS on a DVD before we actually get to the movie.

Similar Messages

4:3 title safe protect grid in HD project

I have been searching and flipping on tabs looking for an option for title safe settings.
I'm working on an HD project and want the title safe grid to come up as a 4:3 safe protect zone.
can i change the title safe settings in an HD project to do this?

http://www.digital-heaven.co.uk/dh_widesafe

Partner selection at sales order entry: ship-to's flagged for deletion

Hi All,
I need some inputs for the following issue.
For Partner selection at sales order entry level: ship-to's flagged for deletion are also proposed as it is entered in customer master. I dont want to delete the ship-to's marked for deletion in the customer master.
In short - only the ship-to's that are not marked for deletion should get populated.
Kindly suggest if there is an userexit for the same.
Regards
KCB

Hi,
You can try Blocking option for the particular Ship to Party.
But this will not disable it appearing in the Partner Function Selection Pop up.
Once you block it; though it appear in the selection pop up, you cannot select & proceed, as it gives a error message.
You can set this block in 2 ways.
1 - Tx: XD05
Go to the Tx give the customer number, sales area & Pres enter.
There you can set different type of blocks depend on your scenario.
Save
2 - Tx: XD02
Go to TX, Give the Customer number (Ship to Party) & go in. Since you have marked him as a delete, you'll get a warning message there too.
Select Menu option -> Extras -> Blocking Data
You'll coime to the same screen as above.
Maintain relevant blocks & Save
Check whether it satisfy your requirement.
Best regards,
Anupa

Hold flag for service po

Hi,
Please let me know for service purchase order hold button is available or not. when Iam creating a purchase order with item category D (services), then immediately disappears the hold bottom, but other item categories hold button is appearing and possible to kept PO in hold mode. Is their any user exit or config. setting to appears the hold flag for service PO.
Thanks & Regards,
Ranjit.

Enjoy PO can't be put on HOLD. see the SAP help
                                                                                Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
Example
You will find an example implementation under Goto -> Code Example.
In this example, the following behavior is defined:
In the case of stock transfers within a company code, the "Hold" function
     is generally inactive. If an application object contains an error of any
     kind, the function is likewise inactive.

Mass revoke deletion flag for Production order

Hi all,
As we know, we can use program PPARCHP1 to mass set deletion flag for production order.
now, i would like to revoke deletion flag, i had been use tcode: co02 Functions -> Deletion Flag -> Revoke to do it.
but, i have lots of production order, is there any standard program could mass revoke deletion flag?

Dear there is no standard functionality or transaction is available to revoke the deletion flag the only option is you have to do it manually one by one order through the option which you already mentioned.
Cheers
KK

Overriding a single function in sidekick.js?

I made a change to the function called when the "Activate" button is clicked in the CQ 5.4 sidekick.
The function is "getPublishConfig" in sidekick.js.
It works fine when I clone the entire sidekick.js file to [1], and then modify the existing method.
However, I would like to be able to override the getPublishConfig function code only, instead of the entire siteadmin.js, to help control the impact on future CQ upgrades.
I have tried these approaches below, but without luck. If you have any other direction that perhaps I should look at, I would appreciate the tip.
Thanks!
Sara
Approach 1: I tried the clientlibs approach, but the new code was not being picked up- it was the OOB code that was being executed.   I am pretty sure the clientlibs was set up correctly, because this approach did work for overriding the SiteAdmin.Actions.js functions. The custom js file contained code like [2].
Approach 2: I also tried to modify init.jsp in the template folder as shown in [3]. This worked in the simple activation cases. However, when there are assets on the page that also need activating, and the Asset Reference Dialog is shown, then the AssetReferenceSearchDialog.js [4] script fails with an error because dlg.path.push is undefined. I wonder if it is possible that this approach may have worked for simpler functions, but because of the level of indirection it does not work here?
[1] /apps/cq/ui/widgets/source/widgets/wcm/Sidekick.js
[2] CQ.wcm.Sidekick.getPublishConfig = function() { [snip--custom code]};
[3] CQ.WCM.launchSidekick("<%= currentPage.getPath() %>", {
            propsDialog: "<%= dlgPath == null ? "" : dlgPath %>",
            locked: <%= currentPage.isLocked() %>,
            actions: act,
           getPublishConfig : function() { [snip--custom code]};
[4] /libs/cq/ui/widgets/source/widgets/wcm/AssetReferenceSearchDialog.js

I think there is a syntax error in line
document.write("<script type='text/javascript' src='/htmls/js/two.js'> <\/script>");
end tag <\/script> is wrong.

Missing default flag for communication type in crm/business partner

Hello!
We've connected a crm 5.0 with an R/3-system (4.6c).
The crm-system is the leading system...
While inserting a new customer in crm with phone- and fax-number.
After "save" we've got red bdocs, telling us that the standard entry for communication type is missing.
In crm 5.0 there's no standard flag for the phone number but a fixed range with from-date and to-date.
The R/3-system needs the default flag (an "X") as a sign that the number is the standard number.
Anywhere there should be the problem...
Is here anybody with some advices for us?
Thanks a lot in advance.
Best regards,
Ingo

Dear Ingo,
I assume you talk about error message XR002
You have 3 options to resolve the issue:
1. In order to avoid error message XR002 you must set the Standard
Indicator Validity in the maintained telephone in BP transaction.
You can find this indicator in the yellow arrow near the telephone
number. Here you must press the button "Standard Indicator Validity".
2. In customizing you have the possibility to switch off the time
dependency of the addresses causing the XR002.
3. The error occurs due to missing ADRU entries for the communication
data (Email, Phone, Fax etc).
The function modules used in data exchange assumes that there is
an ADRU entry for all addresses. This assumption is partially correct.
If an address is created in Basis release 6.40 and above, then for all
communication data of that address ADRU entries will be created.
But if a Business Partner(with address) is created in release 6.20 or
below and system is upgraded to 7.0, ADRU entries for the communication
data of thoses addresses are not automatically created. When the user
opens that BP in change mode & modifies the communication data and
saves it then ADRU entries for that BP's communication data are created.
There exist a correction report and several notes, so I think if above info
is not able to help, it would be better to open a support message!
Regards,Gerhard

Object QK X is flagged for delimiting on date . . in status 1

Hello,
we have a QK Group Qualification with infotypes 1000, 1001 & 1033. But it gives us an warning or error "Object QKXXXXXX is flagged for delimiting on date . . in status 1".
But this object has from gate "01.01.1900" to "31.12.9999". Can someone help me, please?.
Pablo M.

that's really weird, i wonder if it was intentional. these are two entirely different programs interacting with each other. it might be that the search tool is seperate from the programs and is actually a function of the operating system. but i'm no programmer so i cant really say.

Crop marks for Center Cut in Title Safe?

I have recently picked up Premiere Pro 5.5 after the whole Final Cut Pro X fiasco, and a feature I loved and used all the time in Final Cut Pro 7 which was missing in Final Cut Pro X was crop marks for Center Cut in the title safe. I often have to do HD Projects that are broadcast on 4:3 TV center cut, so you need to make all the graphics for the center cut for SD, and then leave safe space for the HD version.
From what I can see I don't see these marks in Premiere Pro 5.5. Is there a place for feature requests for Premiere Pro, so I can put in a request as this is something that is really necessary in our production workflow.

Well, PrPro's Titler has the Center Align for both Vertical & Horizontal, but for guides, etc., it is lacking.
I use the tips in this ARTICLE to create alignment guides, as per my needs.
I have been filing Feature Requests for years, and have also asked for many of the element Alignment functions from PS.
Good luck,
Hunt
PS - I also create custom guides/grids for PiP, where I need to match the Scale & Position for the PiP footage.
PPS - I assume that you have looked at Title & Action Safe marks, and they just do not do it for what you need.

How to update 'Primary_Per_Type' flag for a Party Site Use?

Hi,
We have few party sites flagged as Primary Bill To and Primary Ship To. We want to change this flag for these party sites and flag some other sites at Primary Bill to and Primary Ship To party sites. This is required for correct defaulting of the Bill To and Ship To in iStore (R 12.0.4).
iStore users are not allowed to change bill to addresses and hence the orders placed are having wrong bill to address. Besides, 'Profile' link has been removed for all iStore users and Primary User functionality is also not implemented.
I tried using 'Oracle Customers Online Super User' responsibility but it does not show Primary checkbox for Address Purpose.
Thanks,
Vishwas

Hi Vishwas,
As soon as you mark one site as primary for some usage say "BILL TO" then the other site gets de-marked. So the basic thing which you need to do is mark the new site as the primary "BILL TO" and the unchecking will be taken care of.
Now the thing is that whether you have already created the new site and now trying to mark the site use as primary or you are yet to create it. If you are yet to create it then i think the primary flag might be exposed. Otherwise you will have to personalize the page to expose it. In the former case also you will have to personalize the page to expose the primary flag.
The other option which you have is to use the TCA APIs to do so from PL/SQL.
Regards,
Ravi

Deletion Flag for a FL

Hi,
Even when we have set a Deletion flag for a Functional Location, it allows us to install Equipment in it. Our
requirement is that the System should disallow it. How can we restrict equipment installation?
Regards
Abhi

Hi PeteA,
I have already tried the first option.
Can you explain the procedure ,how to restrict equipment installation by using user status. I tried that but could not find any business transaction releated to equipment installation for Object--FL in Status Profile creation.
Abhi

Set deletion flag for Order before releasing the order

Hi all,
can we set the Deletion Flag for an order before release of that order.
Regards,
Bhanu.

Hi,
You can lock and unlock order without releasing.
In case of Un execute we can not release order further.
Path:
ORDER-FUNCTION-LOCK
order-function-unlock
Regards,
Sudhakar

Error in activating init flag for delta load

Hi everybody, I am trying to activate the init flag for delta load, when I schedule the infopak it is taking too long to execute and the status is remaining in yellow for a week. I checked in details tab the error message is u201C no data available in source system u201C Please helpu2026

Hi Vinod,
When there is no data available in the source system, you will have yellow flag for the delta init request. Check for the delta queue entry (RSA7) on the source system. Delta mechanism starts working once this flag is created. After that schedule the delta infopackage.
Also check on the source system whether there is any data avilable in the application tables related to this datasource. Take the help of functional consultants if required.
Regards,
Sreenivas.

Flag for Follow Up

Does anyone know of a way to send a javamail message with a flag that functions similarly to the Outlook flags?
In Outlook:
New Message> Actions> Flag for Follow Up...

Flags are specific to the mail store. This means that you cannot send a message and have the flag persist on the remote server.
You can set the "priority" of a message by adding a header but that doesn't mean the client will do anything intersting with it.

How to remove flag for deletion for an article in SAP IS Retail

Hi,
I wish to know , is it possible to remove flag for deletion at client level for the article (in SAP Retail System) ?
I have already tried to do remove the flag using the tcode MM06 (MM) method.
But the system says that, it cannot be done for the articles maintained using the retail functions.
I there any other Tcode ?
Or it's the end of the road ??
If possible please reply asap.
Regards,
Anirban Roy

awaiting response.

Flag for overriding TV zoom function? Or title-safe settings for zoomed video...

Similar Messages

Maybe you are looking for