Flash Access DRM FMP Fails When Authentication Dialog Triggered for Display

Hi all,
Flash Media Playback is failing in the case when playing a video that has Flash Access DRM that requires display of an authentication dialog. A sample failing configuration is here:
http://provenwebvideo.com/codesamples/10/fmp_drm/
Note, the link above includes the same video asset running successfully in Strobe Media Playback 1.0 (alongside to the right).
Also, the link above includes FMP working successfully with a second video that has Flash Access DRM but which does NOT trigger display of an authentication dialog (second video in player in a row below the failing player).
Source on the Flash Access DRM video test assets are from the Flash Access team via the following link:
http://forums.adobe.com/message/3144143#3144143
fyi, This is not a showstopper for me. I am just reporting it as I was surprised that it works with SMP, but fails with current FMP.
hth,
g

Wow, Greg, the test page is awesome! I can only wish that all the issues get reported this way!
The issue with DRM content played with http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf is caused by the fact that the FlashMediaPlayback.swf is compiled for the Flash Player 10.0.
I tested your sample with the Flash Media Playback compiled for 10.1 (http://fpdownload.adobe.com/strobe/FlashMediaPlayback_101.swf) and it works fine: http://smpfmp.appspot.com/fmp_drm.html
Note that you need to ask your viewers to upgrade to the latest flash player, since Flash Media Playback doesn't handle this automatically, yet. (we have this feature in the backlog, but it might not fit into our future 1.5 release). Check this for technical details related to this: http://www.adobe.com/devnet/flashplayer/articles/swfobject.html
Does this information help? Is there something that you would expect us to implement or document better?
-Andrian

Similar Messages

Bad Adobe Flash Access DRM module

I have been streaming videos and movies I have purchased without problems until yesterday when Amazon wouldn't load the video and suggest upgrading Flash Player.
I have OS X 10.5.8, so Flash Player 10.3.183.29 is the most up-to-date version my computer can have.
I went to Adobe site and followed instructions for removing the bad Adobe Flash Access DRM module, deployed in 2011. Replaced it with the corrected DRM module. When I ran the test for protected content through the Adobe demo video player, no video played and received message: Error #3343. IV check failed.
What is error #3343? How can this be resolved?
Would greatly appreciate anyone's help on this.
Thanks.

Moving this discussion to the Using Flash Player forum.

Public Facing Flash Access DRM Examples?

Hi all,
I am testing Flash Access DRM support in video players based on Adobe OSMF (Open Source Media Framework).
Might anyone be able to provide me URLs on any public DRM-enabled test assets? (I am hoping for a shortcut short of generating them myself.)
Thanks,
g

[ Using the AIR-based Flash Access UI Manager ]
0. Ensure you have properly set up the Flash Access Manager (see step #5 of: http://www.adobe.com/support/flashaccess/pdfs/FAXS_2_0_Quickstart.pdf)
1. Navigate to the "Policy Creation" tab, click "New" to create a new policy, and then navigate to the "Play Right" tab.
2. Set the desired Digital and Analog Output Protection levels (see reference image)
3. Select the "Save" button, select it from the pull-down "Select Policy" menu, and then "Use to Package" to navigate to the packaging tab
4. Select your new policy from the "Policy File Name(s)" pulldown menu, populate the filename or directory of the content you'd like to package, and then click the "Package Media" button.
[ Using the Java Command-line tools ]
0. Ensure you have properly set up the Flash Access Manager (see section #9 of: http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf)
1. Modify the flashaccesstools.properties file to have the following properties set:
policy.outputProtection.analog=REQUIRED
policy.outputProtection.digital=REQUIRED
2. Create the policy: java -jar libs\AdobePolicyManager.jar new OP_Required.pol
3. Package your content with this policy: java -jar libs\AdobePackager.jar sampleUnprotectedVid.flv OutputProtectedVid.flv -p OP_Required.pol
cheers,
/Eric.

How to handle the button "cancel" in a dialog box for displaying views?

Hello!
I ve a question about handling the cancel button in a dialog box for displaying views.
I ve already implemented the dialog box by using the following code:
METHOD eh_onnewqact.
DATA stitle TYPE string.
IF m_popup IS BOUND.
    stitle = cl_bsp_runtime=>get_otr_text( alias = 'ZCC_ICRM/NEW_TASK' )."cl_wd_utilities=>get_otr_text_by_alias( 'ZCC_ICRM/NEW_TASK' ).
    m_popup = comp_controller->window_manager->create_popup(
      iv_interface_view_name = 'ZCC_POPUP_NEWBT/NewQActWindow'
      iv_usage_name = 'CUNewQAct'
      iv_title = stitle
    CALL METHOD m_popup->set_on_close_event
      EXPORTING
        iv_view       = me
        iv_event_name = 'NEWQACT_POPUP_CLOSED'.
ENDIF.
m_popup->open( ).
ENDMETHOD.
My dialog box consists two buttons - cancel and create.
The cancel buttons should close the popup and the create button should create an entity of a specified object. but let us come to the cancel button. I did´nt find any information about implementing an cancel button. So, how should I implement it? I thougt
me->close( ). But that didnt works!
Could u give me further information about that, because my cancel event-handler is empty?
method EH_ONCANCEL_QACT.
endmethod.
After that I would know how my calling view could know that the user pushes the Create Button and how the data of 2 inputfields of the dialog box finds their way to the calling view in order to process this data there?
Thank you very much!

Hi Michael,
thank you for your advice! This problem is solved...
...but I have another issue. Ive implemented 2 editable fields in my popup. The user should fill that fields with context and that context should be processed in the calling view of my popup.
My question is how to transfer these information from my popup to my calling view or method?
I tried the following...
      lv_context_node ?= m_popup->get_context_node( 'QUICKACT' ).
      IF lv_context_node IS NOT INITIAL.
        lv_text = lv_context_node->get_date( attribute_path = '' ).
      ENDIF.
But it doesnt work! The context node object is always empty/initial.
Thank you!
PS: Another possibility could be that the object / node of the calling view is transferred to the pop-up in order to process it there.
Edited by: Marcus Findeisen on Feb 22, 2011 12:13 PM

Windows 7 fails when authenticating to another computer on the network

In Windows 7 (home premium, 64 bit), I am attached to a VPN (Using OpenVPN). Then, whenever I try to either:
- Use explorer to look at the file system of another computer
- Use the remote desktop connection on another computer
- Map a folder on another computer as a network drive
... in all of these cases, I get the authentication dialog and once I send my username and password, it crashes. For example, when I use explorer, it hangs, and then comes back with the message: "Explorer has stopped working"
I have elsewhere seen a proposed solution for similar symptoms, of deleting this key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions\MachineThrottling
However, this is not applicable in my case, as the key is not present.
I don't think that this can be a problem with the network, because:
a) this works fine from a different computer, running XP,
b) I have in fact seen this working on this computer, but just once, straight after a system restore, and I can't replicate the success by doing another system restore.
c) If it were a problem with the network, you would expect Windows to fail gracefully.
Additionally:
- Disabling the firewall doesn't help.
- Disabling the antivirus software (AVG) doesn't help.
- Doing a clean boot doesn't help.
I'd be grateful for any suggestions.

try changing windows authentication levels
http://social.technet.microsoft.com/Forums/windows/en-US/aca3e2d0-6d43-431f-bbba-3c01aea6d5a6/changing-authentication-level?forum=w7itpronetworking
http://technet.microsoft.com/en-us/library/jj852207.aspx

Automatic rules to Internal distribution group failing when authentication is enabled

Hi Forum,
I have set up a rule on a user's PC whereby when he ([email protected]) receives an external email (from [email protected]), it should be automatically forwarded to a
distribution group ([email protected]) with cc to
[email protected] and
[email protected] .
This worked well for some time until recently when it started failing. The only way we can get this working again is when we disable authentication to the distribution group ([email protected] ). We do not want
this disabled as we don't want the outside world to Spam this distribution group. No changes has been made to the system which could have caused this issue.
Is there a way to get this rule working without disabling the authentication?
Cheers
Arvind

Hi Arvind,
Please refer to the following screenshot to create a transport rule and check the result:
Best regards,
Niko Cheng
TechNet Community Support

[Solved]500 Internal Server Error- when open dialog page for LOV

Hello
I have developed JSF / ADF Bc application and my form has inputselect component and everything works fine in embeded OC4J, but when i deploy the application to apps server i get below error when i launch the dialog page to select a value
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
Please help
Thanks
Message was edited by:
user570961

Frank
unfortunately nothing is reported in the log file , please see the bottom of the message to see what's in the log file
this is all i see in the log and this is added to log when the page is loaded before i try to launch my dialog page and nothing else is added to the error i am getting. and in IE it just says page cannot be displayed and firefox reports the 500 Internal server error with the message i posted in original post
we have QA server and there i deployed the application from jdeveloper and it works Okay , but for production , production services team deployed the application using the EAR file i am giving to them and i am getting this error. ( I am providing them with the EAR file generated when i deploy the application to QA from jdeveloper)
I thought i try to deploy this to QA from ear file to see if i can reproduce the problem , so undeployed my application and tried to deploy using ear file in qa, but it never goes to step 2. it hangs on the screen uploading file ..... it never completes uploading and it does not fail with error either
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end

Access Connections fails to recognize DNS server for wired Ethernet connections

I'm running Windows 7 on a Thinkpad T410i. I ran the Lenovo update yesterday which updated Access Connections from 6.01 to 6.21. I then could not make any network connections to the Internet. I used Windows System Restore to back out the changes made by the Lenovo updater.
Since then, I am able to connect to the Internet using the wireless adapter, but the wired LAN connection fails to connect to the Internet because it doesn't recognize the DNS servers The wired LAN adapter is the Intel 82577LM Gigabit Network Connection. The IP v4 configuration settings haven't changed (use DHCP, obtain IP and DNS addresses automatically), but it can't seem to connect to the DNS servers.
The message from Windows Network Diagnostics is:
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding.
The symptoms appear the same as in this problem in the Lenovo support library, but that was occuring with Access Connections 2.60, a much earlier version of the software:
Network connection is not working if Access Connection is used to set DNS information - ThinkPad General
Symptom
When a wired (Ethernet or Token Ring), network profile is created with Access Connections v2.60, the user may be unable to connect to a LAN or the Internet.
Affected configurations
Any model ThinkPad system using Access Connections v2.60
Does anyone have any suggestions? Thanks!
Michael

pariswd wrote:
Hello Lenovo? Are you hearing us?
Welcome to the forum!
Yes, some Lenovo employees do read and post to this forum. Mark is quite active, and several others post as well. In addition, there are lurkers who just read without making public comments although sometimes they ask the mod team to either gather more information or pass along advice.
However, here are the expectations of their participation from the Welcome message:
These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel.
The bottom line is there's no guarantee that you will get an answer to a question here directly from Lenovo.
On the other hand, you just might! ;-)
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Type not found: Point in Flash CS5.5 on Mac when player is AIR for iOS

I've installed the AIR 3.0 SDK as detailed by Porawee in this thread, including his corrections to the xml for iPhone further down in the thread. Everything worked at first, but since then I've rebooted my computer, and since the reboot I can no longer compile an .as file that compiled before the reboot and nothing has changed in that file. Specifically, I'm getting error 1046: Type was not found or was not a compile-time constant: Point. I've checked, and sure enough, I have an "import flash.geom.Point" line in with the other imports.
Ok, now here's the truly odd part: if I change the player from AIR for iOS to AIR 3.0, it compiles just fine. I get the same error, however, when the player is AIR for Android.
Anybody experienced/fixed this or am I re-installing Flash?

I've been poking around trying to fix this, and I discovered something... the error occurs on this line of code:
public function GetIndexOfPointInVector(PointToFind:Point, VectorArray:Vector.<Point>):int
If I comment that function out (it's not used in this particular project), I don't get that error anymore, even though there are plenty of other Points in use in that very class. Possibly a problem with Vector typing?
edit: and now StageOrientationEvent is gone.
Message was edited by: Sean A Simpson

Call to FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' fails when output is triggered

Hi,
In my Smartforms driver/print program for deliveries, I am using a function module 'RSPO_FRONTEND_PRINTERS_FOR_DEV' to fetch the list of front-end printers.
When i try to print the delivery output from vl03n by using 'Issue Delivery Output' option, I can print the output to the designated printer whose value is fetched from this FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV'.
But when i try to print the output by triggerring the output type (using 'Repeat output' from delivery), the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' is failing to fetch the list of printers, and is sending
an error message to SAP inbox saying 'cannot read the list of printers'.
When i further debugged the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' when triggerring the output by using "Repeat output' option, i could see that inside this FM, it is calling another RFC/FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGUI' and one more with destination 'LOCAL_PRINT', where both this calls are failing in this scenario. But the same function calls to this FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGIU'/'LOCAL_PRINT' are working correctly when i try to print the docuemnt using 'Issue Delviery Output' option.
If you look into the code of FM 'RSPO_LIST_FRONTEND_PRINTERS', there is no code inside this FM. It is just a remote function call.
Can you please let me know how can i retrieve the front-end printers in this scenario (scenario: when output/print is triggered by using 'Repeat output')...???
Thanks!

Hi,
In my Smartforms driver/print program for deliveries, I am using a function module 'RSPO_FRONTEND_PRINTERS_FOR_DEV' to fetch the list of front-end printers.
When i try to print the delivery output from vl03n by using 'Issue Delivery Output' option, I can print the output to the designated printer whose value is fetched from this FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV'.
But when i try to print the output by triggerring the output type (using 'Repeat output' from delivery), the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' is failing to fetch the list of printers, and is sending
an error message to SAP inbox saying 'cannot read the list of printers'.
When i further debugged the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' when triggerring the output by using "Repeat output' option, i could see that inside this FM, it is calling another RFC/FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGUI' and one more with destination 'LOCAL_PRINT', where both this calls are failing in this scenario. But the same function calls to this FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGIU'/'LOCAL_PRINT' are working correctly when i try to print the docuemnt using 'Issue Delviery Output' option.
If you look into the code of FM 'RSPO_LIST_FRONTEND_PRINTERS', there is no code inside this FM. It is just a remote function call.
Can you please let me know how can i retrieve the front-end printers in this scenario (scenario: when output/print is triggered by using 'Repeat output')...???
Thanks!

TOC links fail when using book function for interactive pdf output

I have a large print publication consisting of multiple files using the Indesign book function. I have created a Table of Contents in the first document (there are multiple files in this book), but when I save to interactive pdf to create a digital version the TOC links are lost. They only work within the first document.
I have read numerous forums but cannot resolve this issue with the combination of:
1. TOC creation
2. Using Indesign Book Function
3. Multiple documents in the one book
4. Interactive Pdf output required
I look forward to answers???

Nybor123 wrote:
I am on CC version 9.0 but am updating CC as I type this in the hope this may have some answers?
If you are on CC, you should update your InDesign version to 9.2.1 as it is the latest version. Then you should open the TOC definitions, check it, activate the new add anchor on destiny function and save. Now you should actualize all TOCs.
The TOC functionality has been improved and changed between 9.0 and 9.2. If you update your files accordingly you will suffer less pain.

Conenction has failed when connecting to db for creating new Repository

Hi,
I have installed OBIEE on my local machine and also installed the admin client tool. I have a local database and have copied the TNSNAMES in specidied OBIEE folders and also configured user.cmd to put the tns file path. But I still keep on getting connection has failed error.
Please help!!

refer these for any mistakes you did...try one more time after restaring services.
http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
OBIEE 11g - Connection has failed

EBay sign-in fails when relisting an item for sale

Received a notification from eBay that a classified listing had ended. The notification gives the seller a button to relist the item. When I click on the relist button, it takes me to a sign-in screen, even though I am already signed in. Thereafter, the software just loops. The correct username/password are entered, but it just doesn't seem to register the details and returns the same sign-in screen. Yet when I switch to Safari, there are no problems.

Hi Audrey,
Welcome to Lenovo Community
I’m sorry to hear that the website is not opening even after performing all the possible troubleshooting steps, I suggest you to perform the steps from the below mentioned links and please let me know the findings:
Block or allow cookies
Adding or removing websites in Internet Explorer
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do I log off the current user and bring back the authentication dialog box for another user to log in on Iplanet webserver?

I am using JSP.

Hey there Mike Novack,
My understanding is that she replaced the Windows Login with a fingerprint swipe correct? I found some instructions surrounding this here
So that we can best direct you through the process what operating system are you using on your T61?
If you are using Windows 7, try going to the control panel, then to the biometric devices, click the option to change your biometric device settings and you should be able to disable it there.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Android AIR with DRM Flash Access 3 (workflow DRM client side) ? HELP

Hello,
I'm trying to manage DRM encryption for video with Flash Access 3.0 on Air for Android (or mobile device profile). I looked around and haven't found any awnser so far.
I know that Flash Player on Android devices is not supported by Adobe Flash Access, but it seems a bit different on Android AIR application, but where there is some point that I don't understand and I don't find any answer or exemples.
How to manage the DRM API workflow for Android AIR with Framework AIR?
Until now, i made a custom AS3 video playback (like StobeMediaPlayback), and i am trying to play:
an encrypted video ->           http://drmtest.adobe.com/content/anonymous.f4v (encrypted) and its metadata http://drmtest.adobe.com/content/anonymous.f4v.metadata
and a no encrypted video --> http://drmtest2.adobe.com:8080/Content/unencrypted.f4v on Android device with AIR framework.
What I understand in accordance what i found this this forum, there are some differents workfows to manage DRM :
#1 - FMRMS (Flash Media Rights Management Server) before Flash Access :
     -NetStream.play()
     -NetStream.authenticate()
Adobe said tha that the workflow above is no longer recomanded, as we have Flash Access now
#2 - Flash Access for (Flash Player or AIR desktop):
(without token authentication) anonymous
(with token authentication)
1. Get drm metadata
2. Create DRMContentData class from drm metadata
3. DRMManager.loadVoucher()
4. NetStream.play()
1. Get drm metadata
2. Create DRMContentData class from drm metadata
3. Identify from metadata that this video requires authentication
4. Prompt user for credentials and call DRMManager.authenticate()
5 DRMManager.loadVoucher()
6. NetStream.play()
more info : http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7ce3.html
Both case use DRMManager class in which you can use loadVoucher to apply the DRMContentData object from a DRM-protected media file
#3 - Flash Access 3.0 for (AIR 3.2 mobile device):
But in AIR environnement for mobile device, I don't found any informations toward a workflow for DRM Flash Access. The official documention say that the DRMManager class "it is not supported on mobile devices. You can test for support at run time using the DRMManager.isSupported property" (source: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/drm/DRMManage r.html ). For now, when I test my player DRMManager.isSupported, the return is "false".
Is there a way to manage a DRM player for AIR mobile without DRMManager class ? What is the right workfow for this? Or maybe, I mistaken something. I think some people have succeed with DRM implemtnation on AIR mobile...
Thanks in advance
ethiers
(sorry for the english and i am beginner with DRM implementation, I never did that before)
Here is some related thread close about my question
Public Facing Flash Access DRM Examples? (Sample Content) - http://forums.adobe.com/thread/723499
DRM video playback - HELP PLEASE - http://forums.adobe.com/message/2962340
Unencrypted part in encrypted content - http://forums.adobe.com/message/3643812#3643812
Adobe DRM-Activatie crash android - http://forums.adobe.com/thread/779962
Flash Access DRM content not showing in Android mobile - http://forums.adobe.com/thread/841990
NetStream in AIR - http://forums.adobe.com/message/3705234#3705234

Thank you very much Denis,
You are absolute right! And you help me a lot.
On my side, i tested other devices like Google Nexus One (Android 2.3.4 + AIR 3.1), HTC Flyer (Android 3.1 + AIR 3.1) and Samsumg Galaxy tab 10.1 (Android 3.2+AIR 3.1), All support very well the DRMManager service.
For those who want to check it quickly, I developped an application to play an encrypted video with FAXS DRM : You can download :
https://play.google.com/store/apps/details?id=air.air.com.seconceptweb.DRMTestAccessPlayer
If you have some questions, or some observations about FAXS DRM and AIR application for Android, you can use this thread indeed.
Observations :
AIR 3.0
Flash Access Content Protection Support for AIR Mobile — Flash Access content protection support is now available on mobile devices including Android powered smartphones and tablets. In addition, content protection is now supported on tablet devices powered by the BlackBerry® Tablet OS. Note: Flash Access for iOS is not supported at this time. In addition, Flash Access for Flash Player Android is not supported at this time.
source: http://helpx.adobe.com/x-productkb/multi/release-notes-flash-player-11.html
Sorry for my long delay for this replay, i was on vacation... very away from computer.
Regards,
Sebastien

Flash Access DRM FMP Fails When Authentication Dialog Triggered for Display

Similar Messages

Maybe you are looking for