Flash Builder 4.5 Roadmap Question

I was looking at a preview on Lynda.com for Flash Builder Burrito presented by James Talbot.  Near the biggining of the Welcome message he talks about how this is a beta product and targets Android.  He also said that by the time the product is released, it will target Blackberry and iOS as well...is that true?
That really would be a game changer...not having to choose which platform to target.
Mark

See this video: http://www.youtube.com/watch?v=mr22IXMMguA&hd=1
I'm sure enhancements of that kind will arrive in next Burrito build, but it's in a private beta now.
It's usually a good thing to follow Flash on fb: http://www.facebook.com/flashplatform

Similar Messages

  • Flash Builder Burrito Supported Android Phones?

    Hi there everyone. I am giong to start building an Android phone via Flash Builder Burrito.
    The question I wanted to post is, has any tried developing/debugging an Android application on Burrito and connected it with another phone other than the developer phone offered in the Android Developer Marketspace?

    Any Android 2.2 phone should work, and yes, provided you have the drivers for it installed if you are on Windows. We include the USB drivers for all the common supported phones in your Flash Builder Burrito installation at:
    <Adobe Flash Builder Burrito Home>\utilities\drivers\android\
    Refer to the documentation that came with Flash Builder Burrito for instructions on installing the drivers.
    Also, if you run into any other problems with a particular Android 2.2 device, please let us know!
    thanks,
    -george

  • Question on CCloud Flash Builder 4.6 install

    Hello,
    I curretly have Flash Builder 4.6 installed on my computer - it was originally installed as FB4.5 when I installed MC CS 5.5  -- but the 4.6 version was made available as a separate installation from MC.5 when it became available last November -- so I now have FB 4.6 as a stand-alone install.
    My question is this -- do I need to uninstall my stand-alone installation of FB4.6 in order to install MC6 via my CCloud subscription (when it becomes available on May 11) -- or will the FB 4.6 install in CS6 install without errors (in a different location?). The reason I would like to do this is that FB can sometimes be buggy and I have the current install working well. I would like to install the new FB 4.6 and make sure i works and compiles well before uninstalling  last December's stand-alone verson of FB 4.6.
    Thanks 

    Thanks David,
    Just two questions
    1. Is the FB 4.6 version in CC the same as the FB 4.6 I installed in December, or is it a newer release (eg 4.6.2 etc)? If the CC version is the latest would want that
    2. If I did keep my current FB4.6 -- would the CC "know" that it should receive the latest updates. I keep reading where CC apps are always up-to-date with latest releases and builds -- so if I have an "old" FB4.6 -- would the CC updater give it the same updates as if I had installed it directly from CC?
    Thank you

  • Hi I have a small question about Flash Builder

    Hi,
    I am Chenchu Gottipati, one of the graduate students from Department of Mathematics, Florida Atlantic Univerisity, Boca Raton. I have a small question about Flash Builder student version. I am doing my research in Graph Theory and I am trying to implement some animation of graph using Flash. I was trying to download the software but the link was broken. Could you please help me about how to get around this issie.
    Here is the link provided.
    http://freeriatools.adobe.com/flex
    Regards,
    Chenchu Gottipati

    Thank you for your kind reply. But where can I get this serial number ? I was trying to register through the above link but it was broken. So I don't know how to communicate with Adobe customer service to get the free student version.
    Regards,
    Chenchu Gottipati

  • A question about my flash builder

    Hi, i have a question about flash builder. I'm new on this and i want to learned more. The question is, i have four color picker and a shirt, i want when i change the color on the colorpicker it paints a part of the shirt. One color picker will change the color only of the body, another the color of the sleeves and so on. Can someone help and explain how i can do that???

    Hi there
    Click the link below and read the line presented in bright red. Then click the link provided and follow the steps.
    Click here to view
    Best of luck to you in finding your solution! Rick

  • Unanswered Questions in Flash Builder Forum

    Hi Adobe - we have some unanswered questions lingering in the Flash Builder forum.
    I am looking for a download link for Flash Builder 4.7 - for the non-creative-cloud version.
    OR
    Will the creative cloud version work with my Flash Builder 4.7 Premium serial number and should I just install it through the creative cloud process?  I do not really want to go creative cloud at the moment - but I do not know if it is the same Flash Builder 4.7 file anyway and as soon as I put in my serial number it will take me off creative cloud.
    So... looking for a Flash Builder 4.7 download link for my non creative cloud serial number.
    Urgent too - thanks!
    Dan

    oops, sorry.
    here's fb 4.5, https://www.adobe.com/cfusion/tdrc/index.cfm?product=flash_builder_php
    you should be able to update this version to 4.7

  • Lisence Question regarding our Flash Builder Lisence

    Our company uses Flash Builder with the following key: 1424-4000-....
    We do not know how many lisences we have and how we could get flash builder version 4.7? Do we have to pay extra for that also when we bought a lisence in 2010`?
    KR Markus Stechele

    You should contact Adobe Support either by chat or via phone to see about your licensing limitations.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Question regarding Flash builder - mysql

    Hi,
    I created a webapp with flash builder 4.6, I use AMFPHP for the database part.
    If I want to add a person to the db through my app, which has een accent in the name (for example "D'hiet"), it returns an error.
    I don't know where to look for this problem. I assume it has something to do with my database settings, but i'm not sure and I cannot seem to find what I need to change to be able to enter names with accents anyway.
    Hope someone can help me...
    thanks in advance!

    For Solaris10 11/06 Release:
    "The default copy method that is used when you create a Solaris Flash archive is the cpio utility. Individual file sizes cannot be over 4 Gbytes. If you have large individual files, you can create an archive with the pax copy method. The flarcreate command with the -L pax option uses the pax utility to create an archive without limitations on individual file sizes. Individual file sizes can be greater than 4 Gbytes."
    http://docs.sun.com/app/docs/doc/819-6398
    This info for other versions/releases will be in install guide.
    John

  • Flash Builder 4.5 for PHP question

    Can I develop Coldfusion projects within Flash Builder 4.5 for PHP?

    You will get better answers on ther CF forum...
    Mylenium

  • Flash Builder for education question

    I've submitted that form for a free non-commercial version of Flash Builder and they never sent me an email or anything and it's already 2 weeks. Could it be caused by me instead of scanning the letterhead cropping it out of a school report PDF (sorry) ? Does anyone know who to email or can I reapply?

    Flash is a great option for building mobile games. However, it does require a lot of leg work to get everything working. You can use supporting libraries like Starling to get things moving faster. For highly optimized games, we get around 25fps+ on mid range devices. If you are looking for ease of use, Flash is not a good option. I'd recommend looking at other programs like Unity.

  • Flash Builder Syntax Highlite question

    When I click or finish typing a word ("String" for example), Flash Builder or Eclipse highlights every other instance of it for me.
    Effectively making the word unreadable because of my color settings (see image).
    What is that lovely feature called and how do I edit or turn it off.
    Thank you

    Thank you !
    I set the ActionScript Occurences to text as "Highlighted" and selected BLACK (to match my background).
    The words still flash for a split second when I trigger the Occurences feature, but then the highlight goes black and I can read them.
    Thanks again.

  • Flash Builder J2EE Tomcat question

    I've been looking around the documentations on how to configure Flash Builder to work with Tomcat using BlazeDS and have gotten different answers from different places. A few places have mentioned to used the LifeCycle Data Service option, while a few others have mentioned using the BlazeDS option. I am running Flash Builder 4 stand-alone with TomCat6 and BlazeDS 4. Any input on this would be a great help. Thanks in advance.

    Hi Chris,
    The Burrito Preview installs to a different directory than your existing FB4 installation, by default, so there should be no conflict there. Also, it accepts the same Serial Number you have for FB4 if you purchased FB4 as an individual product.
    If you purchased FB4 as part of a CS5 Suite, there will be a site available you can use to obtain a Preview SN for Burrito, but you can still use Burrito in Trial mode until that is available.
    -Chris

  • Flash Builder 4.7 and design view question

    I have programmed a large, commercial level mobile application using Flash Builder 4.6. It is working GREAT when ran on both iOS and Android devices. 
    I was using the trial version of Flash Builder 4.6 to develop this application. I used the states feature that FB has built in to handle Portrait, Landscape, and Phone / Tablet configs. This means that I built 4 different layouts for all 8 of my views in my mobile application. Using the design view in FB 4.6 was what allowed me to do this.
    I have to say that I LOVE Flash Builder so far. GREAT tool. 
    My trial ended just last week. I had to purchase version 4.7 of the software, only to find out that they REMOVED the design view from the software.
    All complaining aside, what have other programmers who are in the same boat as me done as a solution? I would like to continue to program in AS and Flash Builder as I have taken the time to write the application and learn the whole platform. 
    As it stands now, I am in the process of downgrading my liscence keys from 4.7 to 4.6, but in order to do this I had to RETURN my retail version of FB 4.7 premium (bought online) and buy a volume liscening version (NOT through adobe, only allowed to do this through a reseller such as CDW). then once I have a key for 4.7 through volume liscencing, it can be downgraded to 4.6.
    I'm hoping to get input from others in the same boat. Did you change Programming languages? if so, to what? Did you change IDE's? If so, to what?

    Joe -
         I actually never completed the downgrade to 4.6 so I've been using 4.7 without the design view.    In 4.6, I would put a control on the view within design view.  Then I would change each state, move it around, and it would be placed that way.  In my case, each view has 4 states - portraitPhone, landscapePhone, portraitTablet, and landscapeTablet.   I had to do this 4 times for each control under 4.6
         So I went back and looked at my code in 4.7 and all the resulting code was these explicit x, y, height, and width values.  See the code below:
    <s:states> <s:State name="portraitPhone" stateGroups="phone,portrait"
    />
     <s:State name="landscapePhone" stateGroups="phone,landscape"/>
     <s:State name="portraitTablet" stateGroups="tablet,portrait"/>
     <s:State name="landscapeTablet" stateGroups="tablet,landscape"/>
     </s:states>
     <s:List id="lstMake" x="10" y="19" height="25%" allowMultipleSelection="false"borderVisible="
    true" click="changeMake(event)" labelField="label"width.landscapePhone="
    295" height.landscapePhone="105"x.landscapeTablet="
    25" y.landscapeTablet="54" width.landscapeTablet="461"height.landscapeTablet="
    292" fontSize.landscapeTablet="24"width.portraitPhone="
    182" height.portraitPhone="175"x.portraitTablet="
    16" y.portraitTablet="35" width.portraitTablet="399"height.portraitTablet="
    360" fontSize.portraitTablet="24">
     <s:dataProvider>
     <s:ArrayList id="makeCollection">
     <fx:Object label="Cadillac" data="18"/>
     <fx:Object label="Chevrolet" data="1"/>
     <fx:Object label="Dodge" data="2"/>
     <fx:Object label="Ford" data="3"/>
     <fx:Object label="GMC" data="4"/>
     <fx:Object label="Isuzu" data="6"/>
     <fx:Object label="Jeep" data="7"/>
     <fx:Object label="Licoln" data="8"/>
     <fx:Object label="Mazda" data="9"/>
     <fx:Object label="Mercury" data="10"/>
     <fx:Object label="Nissan" data="11"/>  
    <fx:Object label="Oldsmobile" data="12"/>
     <fx:Object label="Sterling" data="20"/>
     <fx:Object label="Suzuki" data="13"/>
     <fx:Object label="Toyota" data="14"/>
     </s:ArrayList>
     </s:dataProvider>
     </s:List>
     <s:Label x="10" y="8" fontSize="11" text="Vehicle Make"x.landscapeTablet="
    10" y.landscapeTablet="23" fontSize.landscapeTablet="24"fontSize.portraitTablet="
    24"/>
     <s:Label x="143" y="11" fontSize="11" text="Vehicle Year"x.landscapePhone="
    354" y.landscapePhone="10"x.landscapeTablet="
    517" y.landscapeTablet="23" width.landscapeTablet="143"height.landscapeTablet="
    26" fontSize.landscapeTablet="24"x.portraitPhone="
    204" y.portraitPhone="8"x.portraitTablet="
    446" y.portraitTablet="11" fontSize.portraitTablet="24"/>
     <s:List id="lstYear" x="145" y="20" height="25%" allowMultipleSelection="false"borderVisible="
    true" click="doYearChange(event)" dataProvider="{yearCollection}"labelField="
    value"x.landscapePhone="
    313" y.landscapePhone="19" width.landscapePhone="157"height.landscapePhone="
    105"x.landscapeTablet="
    524" y.landscapeTablet="54" width.landscapeTablet="343"height.landscapeTablet="
    292" fontSize.landscapeTablet="24"x.portraitPhone="
    200" y.portraitPhone="19" height.portraitPhone="194"x.portraitTablet="
    453" y.portraitTablet="37" width.portraitTablet="276"height.portraitTablet="
    358" fontSize.portraitTablet="24">
     </s:List>
     <s:List id="lstModel" x="10" y="147" height="30%" borderVisible="true"dataProvider="
    {modelCollection}" labelFunction="lblFunct"width.landscapePhone="
    460" height.landscapePhone="99"x.landscapeTablet="
    13" y.landscapeTablet="384" width.landscapeTablet="992"height.landscapeTablet="
    309" fontSize.landscapeTablet="24"x.portraitPhone="
    10" y.portraitPhone="221" width.portraitPhone="301"height.portraitPhone="
    184" allowMultipleSelection="false"click="doModelSelected(event)" fontSize.portraitPhone="
    12"x.portraitTablet="
    16" y.portraitTablet="428" width.portraitTablet="742"height.portraitTablet="
    521" fontSize.portraitTablet="24"></s:List>
     <s:Label x="12" y="132" fontSize="11" text="Vehicle Model"x.landscapeTablet="
    10" y.landscapeTablet="354" fontSize.landscapeTablet="24"x.portraitPhone="
    10" y.portraitPhone="207"x.portraitTablet="
    10" y.portraitTablet="401" width.portraitTablet="154"height.portraitTablet="
    21" fontSize.portraitTablet="24"/>
      So instead of continuing to try and modify these values by hand, then run the program, using trial and error, I took a different tact.   I removed ALL x y height and width values.  Then, I wrapped all the mxml code in either <s:HGroup or <s:Vghroup tags depending on what I wanted.  Then I would just set the vertical and horizontal align on these groups.  This allows everything to scale correctly based on the size of the view (each device really is a little different).   Finally,  I hand entered things like font sizes by using State Groups like this:   fontSize.phone="12"  fontSize.tablet="22".    It still took testing on the screen to see how my layouts worked but it just makes the UI so much easier to change around and works so much better with out all the static stuff in it.
    If you have some time , I would suggest taking one of your 4.6 views that has all these static variables and trying to modify it to work like I said above.    My modified code (to do the same thing as above) is below:
    <s:states> <s:State name="portraitPhone" stateGroups="phone,portrait"
    />
     <s:State name="landscapePhone" stateGroups="phone,landscape"/>
     <s:State name="portraitTablet" stateGroups="tablet,portrait"/>
     <s:State name="landscapeTablet" stateGroups="tablet,landscape"/>
     </s:states>
     <s:VGroup height="100%" width="100%" verticalAlign="top">
     <s:HGroup paddingTop="10" width="100%" height="50%">
     <s:VGroup width="60%" paddingLeft="5">
     <s:Label fontSize="11" text="Vehicle Make"fontSize.tablet="
    24"/>
     <s:List id="lstMake" width="100%" allowMultipleSelection="false"borderVisible="
    true" click="changeMake(event)" labelField="label"fontSize.tablet="
    24" fontSize.phone="12">
     <s:layout>
     <s:VerticalLayout horizontalAlign="contentJustify" requestedMaxRowCount.portraitTablet="8" requestedMaxRowCount.phone="6" requestedMaxRowCount.landscapeTablet="4"gap="
    0" rowHeight.phone="28" variableRowHeight="false" rowHeight="55"verticalAlign="
    middle"/>
     </s:layout>
     <s:dataProvider>
     <s:ArrayList id="makeCollection">
     <fx:Object label="Cadillac" data="18"/>
     <fx:Object label="Chevrolet" data="1"/>
     <fx:Object label="Dodge" data="2"/>
     <fx:Object label="Ford" data="3"/>
     <fx:Object label="GMC" data="4"/>
     <fx:Object label="Isuzu" data="6"/>
     <fx:Object label="Jeep" data="7"/>
     <fx:Object label="Lincoln" data="8"/>
     <fx:Object label="Mazda" data="9"/>
     <fx:Object label="Mercury" data="10"/>
     <fx:Object label="Nissan" data="11"/>  
    <fx:Object label="Oldsmobile" data="12"/>
     <fx:Object label="Sterling" data="20"/>
     <fx:Object label="Suzuki" data="13"/>
     <fx:Object label="Toyota" data="14"/>
     </s:ArrayList>
     </s:dataProvider>
     </s:List>
     </s:VGroup>
     <s:VGroup width="30%">
     <s:Label fontSize="11" text="Vehicle Year"fontSize.tablet="
    24"/>
     <s:List id="lstYear" width="100%" allowMultipleSelection="false" borderVisible="
    true" click="doYearChange(event)" dataProvider="{yearCollection}"labelField="
    value" fontSize.phone="12" fontSize.tablet="24">
     <s:layout>
     <s:VerticalLayout horizontalAlign="contentJustify" requestedMaxRowCount.portraitTablet="8" requestedMaxRowCount.phone="6" requestedMaxRowCount.landscapeTablet="4"gap="
    0" rowHeight.phone="28" variableRowHeight="false" rowHeight.tablet="55"verticalAlign="
    middle"  
    />
     </s:layout>
     </s:List>
     </s:V

  • Newbie Question: Do mobile apps created in flash builder 4.7 need to install Air in order to run?

    Do mobile users using Android/Apple apps created in flash builder 4.7 need to install Air in order to run the apps? Can the apps be ran without Air installation?

    I haven't seen this come up, however you might want to give our latest AIR 3.5 build a try (12/11/2012 - AIR 3.5 Runtime and SDK Update).  If it still occurs, could you please open a new bug report on this over at bugbase.adobe.com?  Please post back with the URL so that others affected can add their comments and votes.

  • Question about Starting Eclipse with PVCS Version Manager Plugin and Flash Builder 4 plugin

    I used Eclipse 3.4.2 SR2 with PVCS Version Manager plugin.
    I installed Adobe Flash Builder 4 Plugin to the Eclipse.
    Eclipse executed successfully at first time.
    After I open *.mxml file with the Eclipse and close.
    After minutes, I execute Eclipse.
    But I waited 40 minutes to see Eclipse Editor screen.
    Are there any problem in Adobe Flash Builder 4 Plugin?
    ====== If you know Korean Character, You can see below message, I hope so ========
    Environment
    * OS: Windows XP SP3
    * Eclipse: 3.4.2 SR2
    * JDK: 1.5.0
    * Serena PVCS Version Manager : 8.3.0
    * Adobe Flash Builder 4 Plugin
    위의 환경에서 Eclipse에 Version Manager Plugin을 설치하여 사용할 때는 잘 동작 하였습니다.
    하지만, Adobe Flash Builder 4 Plugin 을 설치하고 *.mxml 파일을 열어 작업한 후에 Eclipse를 Close 하였습니다.
    잠시후에 다시 Eclipse를 실행하면 약 40분 정도 시간이 지나서야 Eclipse 편집창을 볼 수 있었습니다.
    혹시 Adobe Flash Builder 4 Plugin 제품과 Serena PVCS Version Manager 제품이 서로 conflict 하는 것이 아닌가
    의심을 하고 있습니다.
    귀사에서 이런 경험이 있다면 해결 방법을 알려주시면 감사하겠습니다.
    Thank's

    I experimented with the latest Zend Studio 8 trials on both platforms yesterday, and it looks a little different depending on which platform you're using:
    On OS X, because Zend Studio is now contained entirely within the app bundle, it's tricky navigating to the proper eclipse folder with our Plug-in Utility. As it turns out, the Zend dropins folder does exist if you look down low enough:
    /Applications/Zend Studio.app/Contents/Resources/Java/dropins
    When I typed that path into the Burrito Plug-in Utility manually, it found the dropins folder, and proceeded to install the link without complaint. However, the Zend dropins folder is not working properly on OS X either, as already found on Win, so it's not using the link.
    On Win, Zend Studio 8 doesn't include the dropins folder in the first place, as noted earlier. Apparently, Zend doesn't have its dropins folder enabled on either Mac or Win.
    To see if this problem is specific to dropin links, I downloaded the latest Orbit plugins from eclipse.org and tried adding those directly to the Zend dropins folder, instead of using a link. Zend doesn’t appear to recognize them either.
    I'll check with our contact at Zend to see what happened.
    -Chris

Maybe you are looking for