Flash Button Symbol with As3 - Relevant or not!
I see no point of using Buttons symbols anymore as i script in AS3 using MovieClips and instance name.
Simple question: can we send Button Symbols in the limbs?
Thanks for answering this easy one, maybe not so easy after all....
Some people never use button symbols and have always used movieclips instead, so whatever the limbs might be, your buttons could probably be sent there.
Similar Messages
-
Putting Hyperlinks into Flash Button Symbols
Hi there,
I just wanted to know how to put Hyperlinks into Flash Button
symbols
For example;
I have a button which is named Home, and i have the UP, OVER,
DOWN and HIT stages and wanted to put a
Hyperlink to lets say Google so www.google.com.au and wanted
it to open in the same page not a new tab.
And if possible would like to know how to put multiple
Buttons as one Flash File and have them all Hyperlinked to
DIFFERENT Pages.
I know very little Actionscript, but know what it is and
other basics on it.
I am using Adobe CS3 Flash 9 and would prefer a simple
answer, Thank YouHi,
There is a video tutorial for this on my website below.
Hope this helps.
Thanks
Alan -
Macbook pro has flashing file symbol with ?
computer power up has flashing file symbol with ? mark in center. What does that mean?
Can not find the boot drive.
http://support.apple.com/kb/TS1440 -
Hi
I think my iMac crashed tonight. It kept freezing, and i couldnt force quit anything. I restarted, and then none of my programs would open, and i couldnt click on anything. I held in my power button, shut it off and kept it held in. Then a blank white screen came up and stayed there for about 10 minutes. Then a flashing folder with a question mark came up. Im not sure what happened or what to do. Your help is GREATLY appreciated.
Sarah
Message was edited by: Sarah CMac
Just a spelling mistakeFirst, Try to verify the disk with disk utility found in your install dvd.
The flashing question mark means that the computer can't find a system.
There must be a system error
Unless the hard drive failed, then you should be fine with a reinstall.
(if you hear a clicking sound, then yes, sadly the hard drive is failing.)
Message was edited by: Mad Maxx -
How do I add flash cs4 game with AS3 to flash cs4 website??
I have created a game in flash with ActionScript 3 and now want to add it to a website I have created with pages seperated into keyframes. Ideally, I am trying to have the game start when a link on the home page is selected. I would also like the users to be able to download the game themselves??? Any ideas for a flash novice??
Thank you so much!!! I just added it with a UI Loader Component! Worked really well... although it looks like doing that picked up an issue with some of my code? It's now looping over and over again and the counter within my game (for giving players their score - highlighted in red), is not working?If you are a AS3 guru any help would be greatly appreciated, otherwise thank you so much for your earlier tips
package
import flash.display.MovieClip;
import flash.events.*;
import flash.utils.Timer;
import flash.text.*;
public dynamic class Gift extends MovieClip
private var dx:Number = Math.random() * 10; // make gift scurry
private var dy:Number = Math.random() * 10;
public function Gift ()
this.gotoAndStop(Math.ceil(Math.random() * 4));
this.addEventListener(Event.ENTER_FRAME, scurry);
stage.addEventListener(MouseEvent.MOUSE_DOWN, kill);
public function scurry (e:Event)
if (this.x < 0 || this.x > 550)
this.dx *= -1;
if (this.y < 0 || this.y > 576)
this.dy *= -1;
this.x += this.dx; // make gift scurry
this.y += this.dy;
public function die()
this.removeEventListener(Event.ENTER_FRAME, scurry);
parent.removeChild(this);
private function kill (e:MouseEvent):void
if(e.target is Gift)
e.target.die();
score += 10;
scoreText.text = score.toString(); -
Buttons created with edge animate are not working on android and windows devices
Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
WolframHello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram -
Targeting symbol with on off labels not working
Hi,
I am trying to have this gray button on the right turn the "What is NeoGraft" symbol to white when moused over, and show hide some content.
Content show hide is working, but the nested symbol q1_off with the on and off labels isn't working. I think my code is certainly targeted wrong.
This is the code applied to my ugly gray button:
sym.$("q1_off").stop("off");
What am I missing to target the q1_off symbol and tell it to go to the frame I want?
Here's a link to where I'm at. http://newhairutah.com/edge/res_faqs_01.html
thanks,Hey,
Is there a protective case or film on the iPhone? If there is try testing without it.
Then try the general tips in this article: http://support.apple.com/kb/HT1650#faq22
If the issue persists, the iPhone may need hardware repair. Make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason -
Flash and aspx with some sites just not loding
hay all,
i just installed minefield to day on my Linux pc.
and i just went on some of my usle sites and i notice that flash content wasn't working or displaying and on aspx sites content was not loading.
i cheeked that flash player was enabled.
and one have same issues or know how to fix them?hi cor-el yeh checked that flash works on the flash test page , flash works on
sites like youtube but wont work on sites like bbc iplayer and the site you linked
http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
won't display.
rkiga i have the same issue with http://listen.grooveshark.com/ , i don't use ad blocker but read the blog and i can see that the new java engine can crate some issues and i have used the 64 bit flash player gives nothing but headaches gives random crashes spent alot of time trying to get it to work but just gave up and reverted to a 32 bit os.
i really hope Mozilla find a way to fix thees issues soon i relay like this as a web browser and hope to start using it for testing soon.
i believe im on the beta 8 version -
Flash Pro CS6 with Air 14 SDK not supporting iOS7 icons?
I'm trying to publish an app using Air SDK 14.0.0.110 (and tried 14.0.0.137) and there is still no place to put the iOS 7 icon files, 120x120, 76x76, and 152x152, is this correct?
Your only choices are to build from the command line, or change to Flash Pro CC 2014.
Read this long thread for how you might publish from the command line without having to get the whole command typed perfectly (you can get the line from Console):
https://forums.adobe.com/thread/1308215 -
Mask layers in button symbols not working?
Hi!
I am making a button symbol with many graphical elements
placed in separate layers. I also want to use regular (not
scripted)mask layers inside the button symbol but it doesn't work
when I test the movie. In the authoring environment tha masking
effect shows up properly but when I test the movie it just stacks
the layers on top of each other as regular layers.
Is this a bug? In previous falsh versions I think this method
was working fine.
Why is this happening? Attilareinhat wrote:
> Hi!
> I am making a button symbol with many graphical elements
placed in separate
> layers. I also want to use regular (not scripted)mask
layers inside the button
> symbol but it doesn't work when I test the movie.
that is correct. If you search the forum by "mask button" you
will find posts
going back many years saying that flash does not support
masking within button.
To work around that limitation, you can place your mask in
movie clip and than
that clip inside a button.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free> -
Button Symbol and text change.
Hi,
I have a button symbol with an Instance name of myButton that
has a text field in it. The text field is dynamic and an Instance
name of myText.
I'm trying to change the text from a class I've created like
so...
myButton.myText.text = "Changed Text";
I'm getting this...
1119: Access of possibly undefined property myText through a
reference with static type flash.display:SimpleButton.
Can someone please tell me where I'm going wrong please.
Thanks in advance for any help.
Regards
Simon.Is the TextField added in design time - that is you placed it
using the Flash IDE? In that case you might not be able to
reference it.
Rather you need to add it in a DisplayObject container during
runtime using the various SimpleButton state properties such as
downState and upState. See the example at SimpleButton doc.
SimpleButton -
i have a flash website template where i have done all the editing for my website but now on profile page i create a button and i want when i click on that button that button will take me on another page which is already in that template, but i can't create that. Please assit me asap.
I have create that button on "symbol 25 copy 2" and i want that button take me on "symbol 25 copy 4"What will people who do not have Flash installed do when they
come to your
page? How about the search engines?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Andy" <[email protected]> wrote in message
news:e50thk$hjd$[email protected]..
> In DW if I hit the "Play" button in Properties and then
click the Flash
> button, the link works but will not work in IE6!!!???
>
>
> "Andy" <[email protected]> wrote in message
> news:e50rde$fde$[email protected]..
>> Thanks for your reply, Alan.
>>
>> That is what I did put in the link box but for some
reason the link will
>> not work.
>> I put
http://www.netspace.net.au in
the link box, then saved my work and
>> viewed it in IE6, but it will not connect me to the
site when I click on
>> the button. If I create a hyperlink using a word, eg
Netspace, it works
>> OK.
>> I'm using Dreamweaver 8.
>>
>> Andy
>>
>> "Alan" <[email protected]>
wrote in message
>>
news:C0995965.28F809%[email protected]..
>>> In the Flash Button dialog box, in the url or
link box, type the full
>>> url
>>> address including the
http://
>>>
>>>
http://www.example.com
>>> instead of
>>> www.example.com
>>>
>>> You have to do this for all external links,
whether using flash buttons
>>> or
>>> regular links.
>>>
>>>
>>
>>
>
> -
I've upgraded from GoLive and have installed flash
buttons/text on 2 sites. I started working on a 3rd site and now
every time I create a flash button/text I get the message :
"invalid name". Usually the name is xxx.swf. Just when I was
starting to like DreamWeaver.....arrrgh BTW I tried to post in the
General Discussion but every variation of my "nickname" was
supposedly taken--even when I just ran my finger across the
keyboards as I did with this nickname. Thanks for any help.
As a followup--I opened the index page from one of the other
sites and created and saved a new flash button with no
problem.> If that's the case why does Adobe promote using flash
buttons and flash
> text on
> the Dreamweaver tutorial: Migrating from GoLive to
DreamWeaver?
It's a good question. Adobe is offbase with this promotion,
but they are
desparate to convince people that the migration is easy. It's
not.
Especially not if you don't have good facility with HTML and
CSS. Garrick
Chow should be ashamed of himself.
I have seen that invalid name error alert mentioned by others
from time to
time, but I'm not sure what is triggering it. Being as how I
wouldn't dream
of using Flash Text or Flash Buttons, I can't really help
you. But were you
not using them at all, it goes without saying that you
wouldn't have to
crack this nut. Why are you using them?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"s;lsu[rtpoeiou [" <[email protected]> wrote
in message
news:[email protected]...
> If that's the case why does Adobe promote using flash
buttons and flash
> text on
> the Dreamweaver tutorial: Migrating from GoLive to
DreamWeaver?
> (
http://www.adobe.com/designcenter/dreamweaver/articles/drwcs3_golivemigration.h
> tml) In fact there are 2 separate chapters--one for
Flash buttons and one
> for
> Flash text and the narrator, Garrick Chow,
enthusiastically promotes
> Dreamweaver's Flash button/text features and says "The
good news is that
> most
> people have the Flash plug-in installed on their
computer these days."
> Whom am
> I supposed to believe? Maybe Garrick Chow should add
something at the end
> of
> the tutorial like, "Oh BTW we're dropping these features
in the next
> version."
> Anyhow that is not my issue--the problem is the "invalid
name" dialog that
> I
> get when creating a Flash button/text only in one site.
I can create the
> Flash
> button/text with no problem in 2 other sites. In fact I
can import them
> and
> install them in the problematic site. At any rate thanks
for your input.
>
>
quote:
Originally posted by:
Newsgroup User
> If you want to use Flash for navigation, consider this -
>
> 1. Some people don't have Flash installed - what do they
do? At the
> least,
> you will have to provide redundant, HTML-based
navigation.
> 2. Search engines may not parse Flash links - your site
will not be
> spidered by them
> 3. Screen assistive devices don't parse Flash links -
what will those
> users
> do?
> 4. DW cannot maintain links within a Flash movie, so if
you move or
> rename
> a linked file, your navigation will break - what will
you do? You will
> have
> to remake those buttons.
>
> It's usually a very bad idea for these reasons - and for
these reasons,
> Adobe has removed Flash buttons and Flash text from the
next version of
> Dreamweaver.
>
> I strongly encourage you to select another method.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
>
> -
Hi all
I'm looking for flash button on dreamwaver cs4 I can not find
it where is it
Thanks for help.Thankfully, it's been removed, as has Flash text.
Using Flash for buttons or content was a bad idea 10 years
ago, and it's
even worse now.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"linuxformat" <[email protected]> wrote in
message
news:gbe84j$k3i$[email protected]..
> Hi all
>
> I'm looking for flash button on dreamwaver cs4 I can not
find it where
> is it
>
> Thanks for help. -
Just turned on my MacBook and it has a flashing file symbol...Help?
Switched on the MacBook and it has a flashing file symbol with a Question mark. What does this mean the user manual was rubbish...
Welcome to Apple Support Communities
It means that the MacBook couldn't detect any bootable partition to start from. It usually means that the hard disk is damaged, but it could also mean that your computer has forgotten the startup disk.
First, turn off your MacBook and turn it on holding the Option (Alt) key, so you will see all bootable partitions in the display. If you can see the OS X partition, select it, and after starting, open System Preferences > Startup Disk, and select the OS X partition.
If it doesn't work, it probably means that the hard drive is damaged, but we should check it. To do it, hold Command and R keys while your computer is starting to start in Recovery HD and open Disk Utility. Then, choose "Macintosh HD" in the sidebar and repair the drive. If it couldn't be repaired, you need a new hard disk
Maybe you are looking for
-
Imported images and processed in wrong project can I transfer?
imported images and processed in wrong project can I transfer to the correct project and delete from the incorrect project without loosing my work so far? ok I know similar questions have been asked but I could not find an answer using search.....so
-
I'm getting a "payment declined" message when updating my credit card details. Although it is a new cr card I have made purchases on Amazon with the card so i know the card is ok.. I see this seems to be a common issue with itunes/app store. Has ther
-
How to block sales orders automatically if an invoice is overdue
Hi, I want to block all new sales orders automatically if the customer has got an overdue invoice. how can i do that?
-
Source list for service vendors
Dear friends, How to maintain the source list for service wise for service vendors. And for what purpose standard service catalog is maintained.Please suggest Regards, Canand
-
Does Mac Pro 2.1 (end 2007) support Samsung SSD 840 Drives ?
Hi Folks, I am looking to upgrade my old Mac Pro 2.1 drives with a new 840 Samsung 256 Gb SSD drives, has anyone experienced this before ? Meaning : is the upgrade straightforward ? considering the ssd drives holds sata 3 connectors and my old mac pr