Flash CS4, Exporting Quicktime Movie: size, aspect ratio, and alignment

I am new to Flash so this may be a basic question, but I have not been able to find anything in the help files or the forums.
I have tried several times to change the size of my quicktime movies, from 550 pixels by 400 pixels to 480 pixels by 480 pixels, and I cannot seem to do it. I have used "Modify > Document" and tried every option I could find through this command. Each time I export I double check that the export settings match my desired size, and they do, but when I open the movie in quicktime, it has been stretched to fit 550 x 400 pixels. The preview movie looks exactl how I want, it is only the exported movie that is incorrect.
Is it possible to make a quicktime movie of the size I would like, or is that a standard format that cannot be adjusted?
As a workaround, I have tried squeezing my 480x480 content into the 550x400 stage (while scaling it prportionally). but when I do this, the square of content is not centered in the background in quicktime. It is off center in the preview movie as well, and this commonly occurs after I have used "modify > document" to change the size of the document. The side to which it is aligned seems to be inconsistent.
Is there a way to realign the video after I have modified the document size? Does changing the document size through "modify > document" affect the centering and alignment of my video? Is there a way to change it back?
I have attached images of my videos in flash, and then what they look like after export.
Thanks in advance for any advice.
-Ben

to explain a little further . . .
the dark gray areas in my images delineate the content of the animation, and in the "550x400 after export" image, the black strip to the right is a margin showing the background color of the document, which is black. notice that there is only a margin on one side, and not both.
Thanks some more,
-Ben

Similar Messages

FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

Hi you all,
My name is Alexander, I'm from Belgium.
I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
Here's a comparison between the two:
As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
Any ideas on how to solve this very annoying problem?
Many thanks!!
Alexander

Hi Studio X,
Thank you for your quick reply.
The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
Alexander

Final Cut Pro exporting Quicktime movie and file size

I make short stop motion animations in FCP and usually when I export using current setting the file size is about 230MB for 60 seconds movie. However with the current project the exported quicktime movie file is only 32.1MB for 57 seconds movie. I don't think this is normal even though I set it with "current setting" and check off the make movie self-contained box.
How could I make the export setting back to normal so the exported quicktime movie will still be in high quality in a big file size?

Hi Ian,
it looks clear and same quality as usual. Maybe this is just how it is.
I am still worried because I exported another project to test and this one also is now exported into reduced file size. This is a 60 seconds movie and when I last exported, FCP created a 225.2MB quicktime file and when I exported exactly the same project again just now it is only 22MB... again, this is not self-contained movies.
To be honest with you I am really not familiar with digital settings, and I was trying to figure out export setting for a required file size and aspect ratio etc. for a projection the other day and it has been since then that my FCP started exporting smaller size QT files.
My project is in 4:3 ratio and all images on video sequence are digital still images. If you could kindly point out some places to look at to make sure that the settings are correct, that might be helpful (?)
thanks much!

Not able to export quicktime movie from Flash CS5 or CS6.

Hi! I am not able to export quicktime movie from Flash CS5 or CS6. When I export it the progress bar is showing and says Recording Flash content and nothing happens

I havent exported any videos in the past from Flash. The movie is around 45 seconds and the size is 470KB.
I tried both, the memory and the hard drive.
In the attached image you can see the settings and in the other image you can see the progress bar that remains without something to happen.
I dont mind what type of video to export it can be also .avi but again I have troubles there. It is very large and the animation is distorted.
The animation consist from two scenes. The first one can be exported without any problem but the second one cannot be exported. May be because it has some masks layers and guide layers?

Exporting for Web - maintaining aspect ratio

I've been trying to export a 6 minute video as a Quicktime movie file which will be imported into Adobe Flash for use on the web. I've tried 3 or 4 codecs and all of them end up creating a 4:3 image where my source is 16:9. What codec would be best to use and maintain the original aspect ratio and still keep the video file a reasonable size to import into Flash.
Thanks for the help
Carl

Ok, I misspoke when I used the term "codec". I did mean I had tried a variety of settings, none of which preserved my original 16:9 aspect ratio (and this, despite setting "preserve aspect ratio" in the mpeg-4 settings). So, I have experimented with a variety of settings to no avail. I'm sure there is something there - I was hoping someone had the same experience and could clue me in on what settings to use.
thank you,
Carl

Export Self-Contained / Sequence / Aspect Ratio Question

Hello all,
I have source clips, that look like this, with a command+I in quicktime:
Format: 24-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
DVCPRO HD 1080i60, 1280 x 1080 (1888 x 1062), Millions
FPS: 23.98
Normal Size: 1888 x 1062 pixels
Current Size: 1888 x 1062 pixels (Actual)
Now, in FCP, I have to chop this source up into smaller clips, so as I set in and out points, I drag to my sequence, and let FCP adjust the sequence settings to match the clip. It auto-adjusts to:
Frame Size: 1280x1080
Aspect Ratio: HD (1280x1080) (16:9)
Pixel Aspect Ratio: HD (1280x1080)
Compressor: DVCPRO HD 1080i60
Audio: 48khz, 24-bit, Channel Grouped
When I export my clip, I want little/no processing of the source file, and want the aspect ratio to be locked at the highest quality possible, with no funky pixel aspects ratios, etc. So, I export a Quicktime Movie (no Quicktime conversion) with "Current Settings", and I make the clip self contained.
The output ends up as follows:
Format: DVCPRO HD 1080i60, 1280 x 1080 (1888 x 1062), Millions
24-bit Integer (Little Endian), Stereo, 48.000 kHz
FPS: 23.98
Normal Size: 1920 x 1080 pixels
Current Size: 1920 x 1080 pixels (Actual)
So, obviously the pixel aspect ratio has done something in the export, as the original size was 1888 x 1062 and is now 1920 x 1080.
Is there a way to process these clips on export from FCP, where the pixel is a normal 1:1 conversion, be it at 1280x1080, 1888x1062 or 1920x1080 with DVCPRO HD 1080i60, in FCP? Or is this something I have to achieve in Compressor? I'm looking for the Quicktime info on the resulting clip to return the same size for: Format, Normal Size, Current Size.
Any help is appreciated! Thanks!

I have read this post over and over and there are some strange things going on with analyzing media now. I am absolutely sure that my HD footage (from a Z1U) used to be read by QT at 1440x1080 (1920x1080). Actual pixels were 1440x1080, a 4x3 aspect ratio, but displayed at 1920x1080. Used to be, like I said. I recently upgraded to OS 10.6.4, and QT 10 is quite a bit different. (In fact, other that the new skin, I haven't found any new features I like. Beside the point.) Now I get a QT readout like yours: 1440x1080 (1888x1062). A 4x3 capture aspect ratio and a 16x9 display aspect ratio, but not the same numbers. This can't be right--by law one of them has to be incorrect. I suspect the new version of QT. The same clip in FCP is read as as 1440x1080 with the HDV pixel aspect ratio (Edit --> Item Properties --> Format.) Furthermore, the readout from MediInfo Mac (endorsed by Apple) is even stranger: 1416x1062, a 4x3 aspect ratio, betraying yet another suspect data output. May be MediaInfo is correct, maybe not. I suspect no--my gut says FCP is correct, since it was once matched by QT. So, three analyzations and three results. The only conclusion is one or more of the analyzers is incorrect.
I suspect that the data readout in QT 10 is questionable. According to the Z1U manual, the camera records at 1440x1080, QT and FCP have this correct, but MediaInfo Mac does not. But the display raster information, as read by QT 10, has changed from 1920x1080 to 1888x1062.
So, I did a test. I followed the same procedure you did, including letting FCP set the Sequence Settings (it was correct). The QT 10 data readout from the exported movie was, like yours, 1440 x 1080 (1888 x 1062). Same results when I forced the Sequence Settings to HDV 1060i first. [FCP 6.0.6, QT 10.0 (114) ]. This was consistent with the QT 10 readout for the original, raw media.
My conclusion? Your movie is fine, there was no Pixel Aspect Ratio manipulation. The data readout in QT 10 is wrong. Sounds like a bug to me. I'd say MediaInfo Mac also has a problem--maybe they are both "drinking from the same poisoned well" somewhere deep inside the code.
Last resort: if you have access to an older version of QT, try getting the readout from that. I'm going to. If you'd like to know the results, let me know.
One thing you must do: check the Pixel Aspect Ratio in your edited sequence:
[Sequence --> Settings --> General --> Pixel Aspect Ratio]
Make sure yours is set to HD (1280x1080). Actually, check your camera manual to determine what it should be and make sure FCP is matching it. If not, force it.

Premiere exports in incorrect pixel aspect ratio

My Panasonic camera shoots quicktime .mov JPEG videos in a 720X408 px resolution. I am having a very hard time editing them in Premiere, because I cannot get it to export them in a correct pixel aspect ratio.
Maybe you can figure out what I'm doing wrong. Here's what I do.
First, when opening a new project, the closest frame size I can choose is 720x480. So I choose that. I import the .mov file into it, and put it on the time line. At that point it looks like this:
http://img291.imageshack.us/img291/812/premierewindowoc9.jpg
Correct aspect ratio and no deformation.
When I try to export it as a .mov file, I do the following: I click on settings (in the file save dialogue), and go to video settings. I can choose any pixel aspect ratio, it all produces the same results, but for example, let's say, DVCPRO (1.5) (that's the closest to the size I need).
I can manually set my frame size to be 720x408 px, assuming that now the frame size will be exactly the same size as my video and no deformation will occur.
However, the result I get is this:
http://img6.imageshack.us/img6/6730/exportedmoviehl5.jpg
I've drawn arrows on that to make it clearer. So, I have a movie that's 720x408px. Premiere exports a frame sized 720x408, but then for some strange reason shrinks the actual video down to 483x480!!??!! Leaving completely unnecessary black bars on the sides.
Why does it do this?
When I export it with frame size 720x480, it doesn't add black lines on top and bottom as you'd expect. It does exactly the same thing you see in the image above.
I have tried many other combinations too. I have tried exporting it as every other available pixel aspect ratio, also as an avi file, nothing makes any difference. It always shrinks the original video in width, and adds black bars to the left and right.
What am I doing wrong??

Tina,
Lets see if we can get kitty onto YouTube.
There are four issues, that you will need to overcome:
1.) Project Preset to begin. Stanley lists the possible choices in post #8, based on the specs of your camera. You will have to determine which of these you used to record the files. These are *probably* set in your cameras menu area, and if you have not changed them, are probably still set. That will get you started in the right direction - but wait, theres more...
2.) It seems that your camera uses Motion-JPG as the encoder to create these files. There are at least two good Motion-JPG CODECs available, Lead and Morgan. Plus, your camera may well have come with its own Motion-JPG CODEC. The CODEC is what allows your camera to encode/compress the video data, and also what allows programs like Premiere to decode that data. Did your camera come with a CD/DVD with software on it? If so, the installation of that software *should* install any proprietary CODECs to your system. Now, if this was the case (or soon will be the case, when you locate that CD/DVD), Premiere *possibly* will be able to use that CODEC to handle the footage from your camera. If it does not, then it is *possibly* only a matter of purchasing, downloading and installing one of the two mentioned Motion-JPG CODECs. Both are relatively inexpensive, and Premiere *usually* can work with either, though your exact footage might not permit this. This is usually because a camera mfgr. chose to do their own thing. Thats why any disc that came with the camera is the first place to start.
3.) Now, you are in Premiere, have the proper CODEC installed on your system, and have Imported the footage into a Project with the proper Presets. If all is working, and I hope that it is, you just edit your footage.
4.) You have been working with Presets established based on your footage. That is likely not exactly what you will want to upload to YouTube. This is where Export comes into play. Unfortunately, YouTube seems to change the specs. weekly. About the time that someone publishes fool-proof details and settings for YouTube, they (YouTube) change everything. The best advice is to search as many fora, as you can for Export Settings for YouTube. Look at the dates for all articles. You really will only care about the most recent - very recent.
Going back up the list, there is another possibility. That would be to use a 3rd party conversion program to convert your footage to a DV-AVI Type II file. Often, with the proper CODEC installed, Premiere can do this internally, though not always, and even when it works, there can be problems. I use DigitalMedia Converter (Deskshare) a shareware program for most of my conversions. There are many freeware, and shareware, conversion programs available. Many get mentioned in this forum. Many get glowing reviews. Some are easier to use, than others.
Some balk at the thought of owning Premiere Pro and then having to use some 3rd party software to get their footage into a robust NLE, that they paid good money for. The fact is that Premiere Pro was designed to work primarily with DV-AVI Type II files, from mini tape cameras - the point made by several. That does not mean that it cannot work with other file types. It does, though not always without problems. Sometimes just passing the material through a conversion program will clear up all problems and no one is the wiser. I often use Premiere Elements, Pros little bitty brother, to convert some file formats, because it is more tolerant of many of these, than is Pro.
Good luck, and sorry that I do not have a current suggestion for Export to YouTube. Since it is a hot distribution medium, you should have no problem finding the correct settings for today - be sure to check the date of all articles, as the specs change all the time and in a heartbeat.
Let us know if you have any more questions. For "how things are done in Premiere," I recommend the Premiere-wikia: http://premierepro.wikia.com/wiki/Main_Page
for tutorials. Most that you could want to do will be there someplace. The current YouTube setting might be an exception, just because every time the Wikia gets updated, that info is out of date.
Hunt

Export Quicktime Normal Size Changed

I have looked in the other post but have not found the exact answer to this.
I am using FCP 5.12 to export subclips. The clips were captured with Capture Now and are DV NTSC 48 KHz. The original captured file shows in quicktime info DV 720x480 (640x480) and Normal Size 640x480.
I select the subclip and then File>Export>Quicktime Movie. Then Current Settings, Audio and Video, Markers None, with Make Movie Self-Contained checked.
When opened in quicktime the info shows normal size is 720x480 instead of the original 640x480. the exported video is horizontally larger than the original captured videos in quicktime. shouldn't the clip Normal Size be 640x480 when exported using Current Settings? Is this just a display issue and nothing to worry about? I know there is a square pixel aspect selection in FCP, but all the files are set NTSC - CCIR 601 and only the exported clips show the normal size as 720x480 in quicktime.
By the way, I tried to use Media Manager the way the manual suggests but had many problems with it not working correctly and found work around solutions posted on this board to use Export Quicktime Movie.
Thanks.
MDD 1.25GHz Mac OS X (10.4.8)
MDD 1.25GHz Mac OS X (10.4.8)

Would you look at that...my captured video DOES say 640x480. Man, you'd think I'd know this stuff.
OK...so exporting now and...Yep...it is 720x480 stretched. Funny, I never noticed this before. And I have black bars on the side of the exported file too. Interesting.
And if I export as a Quicktime Conversion with all the settings to match the original, DV/NTSC, 640x480, BEST compression...I get the proper size, but the gamma shifts and I get a slightly different color.
Hmmm...this bears experimentation.
Shane

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

Export Quicktime Movie only exports fades and composites (FCP6)

I'm trying to add a couple of lower thirds and a fade in and out to a live capture of a lecture; but for some reason, it's only exporting the effects - the fades and lower thirds. Everything else is skipped in the final QT movie.
I right-click the sequence and say 'Export > QuickTime Movie', leaving the settings as they are. The exported movie is 1.45GB - around the same size as the imported movie - but it's only 29 seconds long. Can anyone enlighten me as to what's going on? I tried clicking 'recompress all frames' but I have two problems with this: (1) it's going to recompress unnecessarily, and (2) it's looking like that will take about two hours.
Any help would be appreciated.

FCP6. Right there in the question title. Version 6.0.6, if that's important.
It was actually recorded off WireCast, with one camera and desktop streaming. Sequence settings are 720p square pixels, H.264 video.
Export from the File Menu has the same effect.

QT Pro movie aspect ratio and masking

Hello,
This might be beyond the scope of Quicktime Pro. But I'm looking for a way to place a jpg/png with an alpha channel (cut out) into quicktime. Then be able to add a quicktime to be seen through the image. But the kicker is to change the aspect ratio of the movie instead of the still image.
In Pro, I can add a masked image into the movie, but can't control the ratio of the movie and image separately.
I can do this in Final Cut & Final Cut Express but would like to find a way for others to do this with a less expensive or free software.
Any ideas how to change the movie's aspect ratio in QTPro while keeping the mask's ratio the same?
Or is there another open-source software to do this?
Thanks ahead of time,
Adam

A "mask" is just a black and white image file sized to the dimensions of the video.
Adding a PNG (JPEG doesn't support alpha channels) file to the entire video would allow you to adjust both track dimensions independently via the Movie Properties window.

How many times can you "Export - Quicktime movie" the same ProRes 422 file until it starts to lose quality?

Lets say you are done with your project & you want an uncompressed copy of it as your master. If you keep importing it back into Final Cut Pro, & keep exporting (Quicktime movie), will it ever start to lose quality?

I've never seen a number given, but would think it is very high.
Apple describes ProRes here:
About Apple ProRes
And in that document says:
"while remaining visually lossless through many generations of decoding and reencoding."
I don't think I've ever seen degradation caused by recompression or multiple compassion, but as a workflow if you output a master file, then re-import it to add graphics and export that, you would only be 1 generation down from the master file. If you wanted to make multiple versions, you can always go back to, and re-import, the master file and make the changes, then export, so all you exports stay only 1 generation down from the master file.
MtD

FCP 7 Export Quicktime Movie Suddenly Stopped working

I use FCP7 on Mavericks 10.9.2. Working in Final Cut with raw ProRes 422 footage and wanting to export my sequence as Export Quicktime Movie. Worked fine until one day it just didn't. Final Cut exports a QT file that QT opens and immediately attempts (and fail) to convert. Then I get a message that QT cannot recognize file type, even though file is a .mov.
I send the file to the VLC media player, and it opens the file but only plays the audio. I have no idea why any of this is happening.
Using "Export Using Quicktime Conversion" I can still get the uncompressed ProRes 422 sequence out of Final Cut, but that's a pain. I want Command-E back. Any ideas?

If you love FCP7, you don't move UP to FPX - you move over to a new set of operational activities, a new vocabulary and a new media management structure. Notice the word "new" as in different, not "updated" as in a faster version of the same system.
If you want a 64 bit version of FCP7, look into Premiere Pro CC.
Best,
x

FCP "Export - QuickTime Movie" gamma shift

Above is an example of what happens when I do a direct export in Final Cut Pro, using the Export -> QuickTime Movie function. As you can see, the image is significantly brighter and the colors are a little more washed out (this image isn't particularly colorful, but trust me, it washes them out). I always thought the Export -> QuickTime Movie meant the image would not be compressed--that it was a straight export using the sequence settings.
The image you see above was shot natively in ProRes 422 (HQ) using an Arriflex Alexa. It has never been transcoded. The bottom image is what it looks like using Export -> QuickTime Movie. Totally unacceptable for a piece of professional software, if you ask me.
I can't express how infuriating this is, to have everything looking perfect in FCP and then exporting only to have it look like garbage. I've been able to play with gamma correction a bit and have gotten it PRETTY close to the original look, but this seems like a horrible workaround.
Anyone else know why this is happening? Is there a fix for this?
I'm working with FCP 6.0.6 and QuickTime 10.1.

Sure thing, Meg.
Here's a source clip with "approximate" gamma correction:
"Approximate" gamma correction makes the image look flatter within Final Cut Pro than it actually is.
Now, the very same clip and frame, but with gamma set to "Accurate" :
Now, things are switched. The exported image looks flatter than the source clip within FCP.
Here's another tidbit of info--the frame from my first post was professionally color graded and exported as a self-contained movie--so there were no filters, FCP or otherwise, being applied there. But the difference is just night-and-day to me.

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Flash CS4, Exporting Quicktime Movie: size, aspect ratio, and alignment

Similar Messages

Maybe you are looking for