Flash with No audio from Keynote3 - I work O6

So anybody having success with exporting flash with audio. I've tried audio files of every format except .wav. Haven't figured out how to turn an aif file into a wave file yet. Nothing works. I keep getting the message that audio was not imported. The qt that I made is nearly 100GB and way to big, but the audio is there as expected.
Help please

iTunes can do it. Set the MP3 compression settings in the advanced tab of the prefs. Then either pull your music into iTunes, click on a song and choose to convert it from Advanced menu, or do what I do and make an Automator script that I simply drag my files onto. It rips them to mp3 as it imports them into iTunes, so I don't end up with copies of AIFs in my library.

Similar Messages

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

How can I combine animation from Flash with a video from Photoshop to make a movie?

I have a project that's due tomorrow. I had to create a motion tween and animation and record a video to put in it, which I have done both already. My question here is, how can I combine my animation from flash and my video from Photoshop to make it into one movie?

No, I am saying that this isn't the forum for help with that. This forum is for Firefox user support, and the helpers in this forum aren't versed in development issues like that - we're volunteers, not Mozilla developers and don't work for Mozilla. You are better off asking about that in a forum where other web site developers do support.

Autosync - Sync Detection Problem with Video/Audio from different sources

Hi,
i've got the following problem:
I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
Is this a bug ?
Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
Thanks for help !

I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
Thanks again for your help.

How do I stop the sound from some previous website from interfering with the audio from a new web site?

Mozilla Firefox is my default browser. Whenever I try to listen to the audio on a video, parts of some old audio from a previous video interfere. I still maintain my Microsoft Explorer browser and I do not experience that problem with it. The only reason I use Firefox is that it supports some games on Facebook which apparently Microsoft Explorer does not.

Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt

Can anyone help with my audio recordings that stopped working?

Hi, I have audio recordings available in a secure "member only" area of my website. Unfortunately, from time to time, some recordings stop working. I only find out about this when my students / clients tell me. I don't understand why this occurs or how to fix it. Can anyone help? Rita

It could be a browser issue?
It could also be an internet issue for the user?
The other is that if the are long mp3 files, the server times out the request.
I would log a support ticket with BC and be as specific as possible to the nature of the issue and if there is a way to replicate it. When the Student / Client tells you about the issue it would also be good to get there browser version and platform details to try and create a replicable error that can be solved.

Code doesn't behave the way it should when i create an ipa . However , if i flash the build directly from xcode it works fine ?

Hi ,
I am creating an ipad application . When the app launches i am trying to get some data from server , and show it at the beggining .
It works perfectly fine when i run the app in simulator , and flash the build in ipad from Xcode .
However ,as soon i create an ipa file , install in ipad it doesnt works . Sometimes , it shows network issue , other times its able to give me the data but as soon i convert the data to JSON objet with NSJSONSerialization class , it returns nill .
Any clue on this abrupt issue ??

Hi,
Are you loading the data in didFinishLaunching ??
If yes then that is the problem.
ios defines a specific time for app launch, if your app takes more than the allowed time, ios will crash the app.
Possible solution might be move the webservice call from there to some other suitable place, this will ensure that you app will launch regardless of any network issue, which can be handled later.

No audio from speakers, headphones work just fine

Hello everybody!
I have a problem with my speakers can anyone help me? I have a satellite L855 laptop with realtek HD audio and windows 8. I was playing some civ 5 last night when my computer suddenly freezed. When i restarted the computer had a system update. After the system update the sound does not work from the internal speakers.
Headphones work just fine though and everything looks normal (the green "sound bars" are moving even though i don't have sound).
i have checked the device manager and everything looks just fine.
I have updated my realtek drivers but it didn't help.
I have double checked and nothing is muted.
I have no idea what might've gone wrong, everything works perfectly except the speaker audio. I just bought this computer a week ago and i would be really pissed if i already had to get it to a repair station.
Can anyone please help me?
Solved!
Go to Solution.

Try a System Restore back to just before you processed the "System Update". From the Start screen, type "System Restore" and select Settings at the upper right and then click on "Create a Restore point" at the upper left and follow directions.
If you post back to these Forums again, please include your COMPLETE model info as in my examples below.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

What's wrong with the audio from my Apple TV?

I will occasionally rent a movie on iTunes because they are a dollar less than the same movie rental through DirecTV. Saturday night I rented and watched “The Dark Night Rises” and was disappointed in the audio portion of this movie as it played on my home theatre system. My ATV2 is connected via HDMI to my Yamaha RX-V65 receiver. My router (which is in the den) is an Apple Extreme dual-band router. Throughout the movie, the dialogue was never centered correctly, the rear channels had very little information, and the left rear speaker had some strange intermittent static noise. This was very disappointing. The following day I tested my amplifier and speaker setup with Yamaha’s in-built speaker test tones and all was well. I then played a Blue ray movie and the audio was fine, including output from the left rear speaker. BTW, while playing the movie through the ATV2, all 6 lights on the Yamaha receiver were lit up indicating all 5.1 speakers were active, but the audio was a mess!! Can anyone tell me what might be wrong? Do these movies rented from the iTunes store and played over the ATV2require a special sound field program on the Yamaha? Any help would be appreciated

if you want the peaks to stay, right click on the audio meter and choose static peaks.
Todd recorded a great video about the audio meter and mixer here:
http://www.video2brain.com/en/lessons/changes-to-the-audio-mixer-and-audio-meters-panels
this migh help.
as for the meter not moving the first few frames, i think, i can't help you.
and keep smiling

Flash with full path link does not work, does anyone know how?

Hey guys do not think many people now needed it, but to kill me and I can not.
I need the following: Place a swf with the full path of another server.
Until then beauty is only put http://www.outrodominio.com.br/flash/arquivo.swf right?
to ai beauty, opens td bem ... easy ....
More link is broken
If anyone can help.
anyway...thanks!

Cute site! I like it!
Regarding your links at the top of the page. Things to try:
1. In the Inspector Page tab, try adjusting the header height value to 0.
2. Move your links/buttons down the page slightly.
3. Instead of making the text hyperlinks, maybe overlay a 1% transparent rectangular shape over the whole button to make your button a "hotspot" hyperlink.
I think the problem right now is that there is a reserved area at the top of the template pages where the navigation menu usually lives. For some reason links placed here sometimes to not work even if the navigation menu is turned off. Seems to be an iWeb bug.
Give the above suggestions a try. Any one of them could help. Let me know what happens! Good luck.

Problems with Airplay audio from Ipad to Apple Tv 2

Hi
I recently bought an apple tv 2 mainly to use it to airplay content from my ipad. Video streams perfectly the problem is with audio, every single time I play any song it stops playing for a second or 10 quite often. I cant play a single song without getting this annoying silents. I thought it might be a problem with my Wifi although the router is pretty close to the ipad so I changed routers but still the same problem also Video streams great, Ive seen complete 2 hour movies with no problems at all. I got an update to the apple tv 2 today and thought that might solve the problem but it didnt.
¿Does anyone else have this problem?
¿Does anyone know what it might be?
Thanks for your help.

Fixed this.
I started fooling around with the Wifi and noticed that as soon as the signal was down to one or two bars the video also had problems when streaming and also had problems streaming from my Macbook. Thats when I realized the problem was not iOS dependant. So I went to a shop bought two nice and shiny N-Wireless routers connected one upstairs where my internet connection is and setup the second one as a repeater bridge downstairs 5mts away from the apple TV so that it gets full signal. Dont have any problems with Audio nor Video since.
Cheers

Headphone jack is working but no audio from laptop all drivers upto date

hi , my audio from headphone is working but there is no audio from the laptop itself, i have downloaded and updated all drivers, audio driver is conexant hd smart audio 221

Hi @SNJY ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv9730us Notebook and not playing sound. Here is a document on troubleshooting sound. Please remove the headphones for troubleshooting.
Here is another step to try.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
A windows update KB2962407 could have caused the no sound. Open windows Control Panel, open Windows Update. Right click it and select Uninstall.
Hope this helps resolve the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Audio output is not working in preferences

MacBook Pro 17" late 2012 - running lion for the last 6 mon, just did 10.8.3 upgrade as instructed. Now I have no audio control on output. Icon in menu is grey and the the preferences' control for output are grey . Output, which is set to Digital-what happened to internal speaker controls. Verified disk, reset permissions, did a pram-restart, and a few restarts from there. Still no audio, but the digital light did come on once out of the earphone jack. Did the earphones and no sound. Correction, the earbuds are now working, they were not working earlier. SUGGESTIONS please!

Hello bacon48,
Welcome to the Apple Support Communities. If you want to know more about troubleshooting the audio on your MacBook Pro, the following article will assist with that process.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Regards,
-Norm G.

Warning: Audio from iMovie08 projects broken in iMovie 09

I had 6 active projects when I upgrade. Three of them seem to be fine, but the other three dropped their audio tracks that I added. Of the three good ones, all three use audio tracks that are simply drop-in songs from iTunes -- where I selected the audio via the iMovie08 media browser.
Of the three with issues, one of them had a custom audio track that I'm not sure I can replicate, so that may just be lost.
The other two were simply songs I dropped in from iTunes via the iMovie08 media browser. The songs show up in the projects pane, but with a yellow exclamation point. When I click play, the movie plays fine, but with no audio.
So, in these two projects with broken audio from an iTunes track, I simply deleted the broken link and re-dropped the same song in. Now the audio is back, but after about 20 seconds of playing, the movie gets choppy, and playback starts freezing though the audio keeps rolling. I haven't tried export, so I don't know if this impacts the final product, but it does make it unworkable to review my projects.
Has anyone else had this issue -- where the audio link breaks and, if you fix it, it seems to mess up the video somehow.
I put this up here both as a request for help, and a warning to others -- back up your projects before upgrading, check each project carefully for the broken audio issue, and if the audio is broken, don't think that just dragging the audio back in will fix the issue.

I spent some time on the phone with apple today troubleshooting this issue. my projects would freeze the visual while running the audio. They had me download a short movie from apple.com (any .mov file will work). close all apps including imovie. go into home folder/movies and drag the imovie events and imovie projects folders to the desktop. this essentially erases all the info in imovie. then open imovie and make sure there is no content inside. once confirmed go to file/import/movies and import a .mov file you know is clean (i would suggest a short one to keep from spending a long time). when the movie shows up in your library select a clip and put it in a new project. does it play both audio and video? if yes the problem is with your clips. if no you have faulty software and will need to replace ilife. go back to home folder/movies and drag the imovie folders on the desktop back. it will ask you if you want to replace existing folders. say yes or continue. if the clip you tested earlier played fine you will have to reinstall ilife and rebuild all events you want to work.
this is a pain but it works. mine is back to normal.

No audio from hdmi port on pavilion dv6

hey everyone, perhaps someone can help me out with this audio issue. i have a pavilion dv6 and I'm trying to pass audio through the hdmi port to my dvdo edge scaler, but it doesn't seem to be working. i don't have any trouble with the audio from the hdmi port to my plasma. but i also dont have any other audio issues with other units plugged into the scaler. I tried changing default audio device and then my media players stops working. so I'm very confused if anyone has any ideas I'm fresh out as I have been working on this problem for most of the afternoon. thanks

Did you install the Intel chipset driver , the Intel IMEI driver, HP Quicklaunch driver and the HP Software Framework?
The simplest way of reinstalling the OS to a new hard disk would have been by using the USB recovery media. From the HP Recovery Manager select the Factory image recovery.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Flash with No audio from Keynote3 - I work O6

Similar Messages

Maybe you are looking for