Flexfields using Profile Values - How to get working?

I've setup a Flexfield on a table. the DFF uses a valueset to verify the input. Your normal forms based stuff. the DFF shows up on the OAF page nicely. the value set on the DFF has a where clause that usess the profile mfg_organization_id
ie
where organization_id = :$PROFILES$.MFG_ORGANIZATION_ID
However, at run time the LOV does now show anything. it's like the profile has not org id.
How do you get around this?
Thanks

I would agree on that setting profile value from code make no sense,in fact profiles are used in a reverse way.Based on profile value you can have ur logic.
--Mukul                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

    How to get work JavaFX WebViewBrowser sample in debian linux wheezy
    You may also check latest version of this problem here... 
    The Starting point I have
    Debian wheezy
    java version "1.7.0_40"
    Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
    Java HotSpot(TM) Client VM (build 24.0-b56, mixed mode)
    GTK version: 2.24
    NetBeans 7.3.1
    Certified configuration acording to JavaFX Supported Configurations
    is
    Ubuntu 10.4 +
      gtk2 2.18+
    GTK is OK. do I require ubuntu?
    first try: by  downloading Java SE Downloads - javafx sample
    Let's try it
    zolta@zolta:~/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40$ java -jar SwingInterop.jar
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGILL (0x4) at pc=0x9b6b4c22, pid=21172, tid=2658700144
    # JRE version: Java(TM) SE Runtime Environment (7.0_40-b43) (build 1.7.0_40-b43)
    # Java VM: Java HotSpot(TM) Client VM (24.0-b56 mixed mode linux-x86 )
    # Problematic frame:
    # C  0x9b6b4c22
    # Core dump written. Default location: /home/zolta/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40/core or core.21172
    # An error report file with more information is saved as:
    # /tmp/hs_err_pid21172.log
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Terminated
    Let's see what core dump says
    to be continued...

    Gusar wrote:
    We need *a lot* more info than that. Could be something very simple, like the interface being up before starting wifi-menu (netctl doesn't like the interface being up, it'll only start correctly if the interface is down).
    Or it could be something more. In which case, you'll need to start wpa_supplicant manually with debugging enabled:
    wpa_supplicant -i wlp18s0b1 -c <(wpa_passphrase MYSSID passphrase) -d
    Once this says you're connected, open another terminal and start dhcpcd. Or, if wpa_supplicant doesn't manage to connect, post the *entire* output.
    Edit: Ok, you posted more info as I was writing my post. Will look through that, maybe it contains something useful. If not, follow the instructions above.
    Edit2: Nope, nothing about wireless in there, except that the driver loaded.
    It worked!!
    I was looking into the logs and found an authentication failure...my password is very long so I made some mistakes while typing it.
    So this is the solution all the way:
    SOLUTION:
    - No need to install or load any external drivers (all I used was already in the base installation)
    - DISABLE THE HIDDEN NETWORK OPTION IN THE ROUTER (thanks for the heads-up @Gusar)
    - run "# wifi-menu"
         or
           "# wpa_supplicant -i [interface] -c <(wpa_passphrase MYSSID passphrase) -d"
    - run "# dhcpcd [interface]"
    - Good to go!!
    I'm sorry for the trouble guys, and like I imagined, it was really easy and now I see my newbiness hahaha ;D
    Thanks.

  • I'm using movie program how do get rid of background noise and put music over top of video

    I'm using movie program how do get rid of background noise and put music over top of video

    Niel,
    Thanks for your suggestion about using RCDefaultApp. I am hesitating to do this because it seems like I'd be installing still another piece of software to fix the original mistake---downloading Reader.
    About 20 years ago I maintained---with considerable handholding---UNIX systems of various sorts. Can you suggest how I might find the plist that seems to require changing?
    BTW, Preview is called whenever I open some random .pdf file. The problem appears when I want to get a file from the web. If the site permits a "download" I can get the file, but if I want to "view and print" the file, the evil dark-grey Adobe screen appears with the whirling black ball. Then Safari quits. I'm wondering if the reference to Reader is in a "cookie" sent from the website, when I first was installing Reader. Is this possible?

  • How to get Work schedule repor of employees

    Hi all
    Can any one help me out in
    how to get work schedule report of employees who are works in different shifts in an organization.
    Thnks in Advance
    Anusha

    Hi Anush,
    Find the SAP Standard reports for Work schedules:
    - PT03 - Display Work Schedule
    - PT63 - Personal Work Schedule (even PT61 also helpful as biswajit said)
    - PT_DSH20 - Daily Work Schedule
    Otherwise you have Time Manager’s Workplace/ Ad Hoc Query reports to view detail reports, which are user friendly for maintain time data.
    TC for Time manager’s workplace is PTMW
    TC for Ad-hoc query is S_PH0_48000513
    I suggest you to go with Ad-hoc and select all fields that what ever output you want and view the results (even you can upload also)
    Cheers,
    TG
    Message was edited by: TG

  • When clicking on an email link, I want the firefox user profile menu to open instead of going to the last used profile. How do I make this work?

    When I click on a link in Thunderbird to open a web page, and Firefox is not already open, I want to have the user profile screen presented so that I can select which profile to use for the Firefox session. Instead, it opens the last used profile. Is there a way to do this?

    That is is always a problem when you are using multiple profiles and Firefox isn't running.
    It might work if no profile is selected (i.e. marked as Default=1 in profiles.ini).<br />
    You can use desktop shortcut that open with a specific profile (-P "profile").<br />
    There is also a setting in the Profile Manager (Don't ask at startup).

  • How to get work item details programatically ?

    Hi All,
    I have a list of work items (process instances) and I want to retrieve each item details such as: attachments, notes, id, ...
    All the items are filtered and represented as Fuego.Papi.Instance:
    Fuego.Papi.Instance[] inst = busProcess.getInstancesByFilter(filter : instFilter);
    But the work item details are inherited from Fuego.Lib.ProcessInstance. So, how to get the item details from inst[] ?
    Would appreciate any help, may be Dan will have an advise ?
    Regards,
    Kim

    If you have instances returned by your filter, you could extract variable information for each instance by doing something like this:
    for each inst in getInstancesByFilter(ps, filter : instF) do
        // here's how to get the value inside a primitive instance variable
        orderAmtObj as Object = getVar(inst, var : "orderAmount")
        // here's how to get the value of attributes inside a complex BPM Object instance variable
        //    - in this case this is an "order" object with two attributes (customerName and amount)
        orderObj as Object = (getVar(inst, var : "order"))
        xmlObject = Fuego.Xml.XMLObject(createXmlTextFor(DynamicXml, object : orderObj, topLevelTag : "xsi"))
        logMessage "The value of the order object's customer name is: " +
               selectString(xmlObject, xpath : "customerName")
        logMessage "The value of the order object's order amount is: " +
               selectNumber(xmlObject, xpath : "amount")
        // here's a rather uninspired way to retrieve who the participant is that was assigned the instance
        logMessage "The participant assigned to this instance is: " + inst.participantId
    endInside the above "for" loop, you could retrieve these predefined variables (this example assumes you use "inst" in your "for" loop):
        objRet as Any
        objRet = inst.getVar(var : "PREDEFINE_ACTIVITY")
        logMessage "Activity name = " + objRet using severity = DEBUGSubstitute "PREDEFINE_ACTIVITY" in the above logic to get this information:
    PREDEFINE_PRIORITY (priority)
    PREDEFINE_ACTIVITY_DEADLINE (activity.deadline)
    PREDEFINE_CREATION_TIME (creation.time)
    PREDEFINE_PROCESS_DEADLINE (deadline)
    PREDEFINE_DESCRIPTION (description)
    PREDEFINE_PROCESS (process)
    PREDEFINE_RECEIVED_TIME (receptionTime)
    PREDEFINE_PARTICIPANT (participant)
    PREDEFINE_COPY (id.copy)
    PREDEFINE_STATUS (status)
    Similarly, you might want to try to get instance information using the Fuego.Papi.VarDefinition object a try. Never used it, but the logic might be as simple as:
        logMessage "who created? = " + inst.getVar(Fuego.Papi.VarDefinition.CREATOR_ID) using severity = DEBUG
        logMessage "does it have attachments? = " + inst.getVar(Fuego.Papi.VarDefinition.HAS_ATTACHMENTS) using severity = DEBUG   
        logMessage "does it have notes? = " + inst.getVar(Fuego.Papi.VarDefinition.hasnotes) using severity = DEBUGDan

  • How to get work center

    Hi All,
    I am creating r actual and planned renue report for service orders ( CS ) .
    Problem :
    I have a service order number , But i am  unable get the workcenter of the order.
    Please guide me how to get the workcenter based on service order.
    Thanks in advance
    Regards
    Sudhakar

    Dear Sudhakar,
    Try using this FM: CR_WORKSTATION_READ
    Field: GEWRK (Object ID of the Work Center)
    View: VIAUFKST
    Regards
    s@k
    Edited by: siemens.a.k on Feb 11, 2010 10:18 AM

  • Wine + Steam(windows) + bumblebee. How to get working?

    Hi,
    I would ove to play some of my windows only steam games in linux, so i installed the windows version of steam using wine.
    How do i get bumblebee to run the game on the nvidia card?  i think all that happens is wine gets run on the nvidia card, or just steam gets run on the card, while the gam only has very low performance.

    zomzilla wrote:
    Hi,
    I would ove to play some of my windows only steam games in linux, so i installed the windows version of steam using wine.
    How do i get bumblebee to run the game on the nvidia card?  i think all that happens is wine gets run on the nvidia card, or just steam gets run on the card, while the gam only has very low performance.
    Please formulate your sentences just a tiny bit better because it is a bit diffuse.
    You have a nVidia card, does the game start or not? or is it just laggy?
    What gl library are you using (nvidia or mesa?).
    Also, what does your xorg.conf say (Especially the `Device` part on your nvidia card).
    Most importantly: What nVidia card do you have?

  • Confirm site use and deletion - How does it work?

    I've been trying to find answers to this topic and read through a number of posts and technet, but I can't seem to get a clear answer on how this process works.  Actually my concern is that I have seen conflicting answers.
    As I read the description, it "sounds" like that if we set a date of 180 days, then the system will send an email to the site owner 180 days after site creation so they can confirm usage.  If they confirm, then the clock starts again and they
    will get another email in 180 days.  If they don't confirm, then we go into the config for multiple emails and eventual deletion.
    Is that how it really works?  I would have thought it would track inactivity someway, but I can't seem to find it that is true.  Does it track inactivity?  If so, how?  By last content update or last visit?

    Run a test in a dev enviroment and you will find that they are wrong, unless it changed for 2013.  I haven't specifically verified it lately, but it definitely didn't work that way in 2007 or 2010.  Also check this sentence from the "Plan for site
    maintenance and management in SharePoint 2013" article on 2013 found here:
    http://technet.microsoft.com/en-us/library/cc262509.aspx#section3
    "This feature works by automatically sending an e-mail message to site owners to see if they consider their site active. "
    Notice that it doesn't say anything about sending it only to "Inactive" site owners.  The way I read this is that it goes to ALL site
    owners.  That's the way it worked in the past and I don't think its been upgraded.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • In GP how to get work items in outlook inbox

    Hi,
    Any one can explain me how to send work items to Outlook Mail. This option is there in ABAP work flow. I need solution in GP.
    Please give any sloution.
    Thanks,
    Sunil

    Hi Jonathon,
    in our last project, we faced the same problem and resolved it with a standard notification CO:
    - we put a notification CO (+ action) in front of the action you mentioned (that one that generates the UWL's workitem and provides the CO for manual processing)
    - the notification's addressee will be the current processor, who is also the guy to do the manual processing
    - the notification email contains a link to the process' current workitem, which is the action you mentioned (e.g. a webdynpro form or whatever the manual processing is)
    The result is, that there will be an automatically sent notification, followed by the normal manual processing. And our client was happy to be able to customize every single email.
    See this link for email administration: http://help.sap.com/saphelp_nw04s/helpdata/en/43/f9097d1b607061e10000000a1553f6/frameset.htm
    Best regards
    Daniel

  • Color Profile Mechanics, How does it work?

    When I bring a photo into Photoshop from Lightroom, I have Lightroom set to send it in ProPhotoRGB color space.  If I tell Photoshop to convert it to sRGB,  what actually takes place?  Does changing the color space simply tell Photoshop or any other application how to display the colors without actually changing the original RGB number values, or does it change the values themselves.  If it does the former, then I should be able to change color spaces back and forth with out loss of any color information.  If the latter, then by going to sRGB I will have permanently lost some of the original color data.  I have not been able to find an answer to this question in any of my research so, I was wondering if anyone reading this knew the answer.

    Good day!
    • Edit > Assign Profile
    The RGB (or grayscale or CMYK) values are not changed, the appearance is changed (if the Color Spaces are not basically identical)
    • Edit > Convert to Profile
    The RGB (…) values are changed to maintain an appearance similar to what the image had in the original Color Space
    Regards,
    Pfaffenbichler
    Edit: Maybe this can be useful as an introduction to Color Management:
    Creative Suite * Understanding color management

  • How to get work schedule through pernr

    I'd like to get one pernr's work schedule, just some data like how many hours does he work a day? which quota type does a absence type deduct?  Is there any BAPI or FM to get it?
       I check the img, and find that if you use pernr to get esg, and psg, than you can get it? but i don't think it is a good idea? so any way, help me , please.

    hi,
    use f.m HR_PERSON_READ_WORK_SCHEDULE
    Thanks
    Vishal kapoor

  • X61s (7668CTO) blue screens during factory restore - how to get working restore discs?

    How can I get factory restore discs that actually work? My X61s was purchased with a Vista Ultimate OEM (32-bit) installation, but when I attempted to do a factory restore this weekend using the recovery disks with the laptop, the recovery process complained that the second disk was not the correct disk. If I follow the prompts to continue it blue screens with a "Page Fault in Non-Paged area" error. I then tried to use the version on the recovery partition (not the created discs) but it also blue screens with the "Page Fault in Non-Paged area."
    How can I get factory restore disks that actually work to recover my Vista Ultimate OEM installation to the factory settings? I am (just barely) still inside my warranty period, so want to get this resolved ASAP. The only other recovery CDs it came with are for XP, but the laptop was purchased and shipped with Vista Ultimate and I don't want to downgrade to XP (if those discs still work).
    I could no longer boot into Windows or do a factory recovery. I have installed Linux so I can work again, but I would like to have the option of booting Vista if I need it.
    Thanks for any help/guidance,
    ~ Daniel
    Message Edited by Jarboed on 12-16-2008 12:18 PM
    Message Edited by Jarboed on 12-16-2008 12:20 PM

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I came across your post about the System Recovery, and wanted to help! To start, can you provide me with the Product Number and Operating System of your notebook?  You can use these links to help you find the Product Number and Operating System:
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running? In the meantime, please review the following documents, as they may help to resolve the issue for you:HP PCs - Troubleshooting HP System Recovery Problems (Windows 8)HP PCs - Troubleshooting HP System Recovery Problems (Windows 7) Please let me know if this information was helpful by clicking the thumbs up below.
    Regards!

  • How to Get Worker Process ID(W3wp.exe) of Specific Sharepoint Application Pool(Not List of All)

    Hi Friends,
    I am using below command to find w3wp.exe ID which i have to attach in debugging,But it gives all W3wp.exe list
    C:\Windows\System32\inetsrv>appcmd list wp.
    I want to find only Specific 'Application Pool' w3wp.exe ID ?
    can anyone help me of  this time saving idea?
    Vishal Goyal

    APPCMD (command) (object-type) <identifier> < /parameter1:value1 ... >*Where <COMMAND> is one of the commands supported by <OBJECT>. Most objects support this basic set of commands:
    LIST Display the objects on the machine. An optional <ID> can specify a unique object to list, or one or more parameters can be specified to match against object properties.
    ADD Create a new object with the specified object properties to set during creation.
    DELETE Delete the object specified by the <ID>.
    SET Set parameters on the object specified by <ID>.
    An object will often support additional commands, such as START and STOP for the Site object.
    For example, the current set of objects available through
    AppCmd is (where <OBJECT> is one of the management objects supported by the tool):
    Object and Description
    Site ----Administration of virtual sites
    App ------Administration of applications
    VDir ----Administration of virtual directories
    Apppool ====Administration of application pools
    Config ----Administration of general configuration sections
    Backup-------Management of server configuration backups
    WP---------Administration of worker processes
    Request -------Display of active HTTP requests
    Module ---------Administration of server modules
    Trace --------Management of server trace logs
    Where [ /parameter:value ]* is zero or more parameters for the command
    GENERAL HELP
    APPCMD /?
    oBJECT HELP
    APPCMD <OBJECT> /? ex. APPCMD site /?
    These is helpful for you
    APPCMD list site "Default Web Site"
    AppCmd list app
    appcmd list site
    appcmd list apppool

  • HT5219 Can I plug an HDMI tv to my mac using thunderbolt and how I get them to recognise each other

    Hi, I just bought the thunderbolt connection to mt HD tv but neither will read each other fully. I get some response but no picture

    Grey background or the desktop background?  Do you have full screen mode enabled?  If so turn it off.
    If you are seeing the desktop backgound on both screens your tv connection is working and if the menu bar is on one screen and not the other you are running the screens in extended display mode.
    About Arrangements, Menu Bar, Extended Displays, and Mirrored Displays
    When you have multiple monitors (and the TV is considered just a monitor) only one monitor is designated as the "main" monitor.  That's the one with the menu bar.
    If you look at the Arrangement tab in your Displays preferences you will see both monitors.  One will have a little white "menu bar" on it.  That's your main monitor.  You can drag the little menu bar to the other monitor if you wish to make it the main monitor.
    You cannot make both monitors main monitors.  However there is a third party app called MenuEverywhere that allows you to do that (it has mixed reviews).
    Your two monitors can be spatially arranged with the Arrangement in Displays as well.  Drag the monitors around each other to define their relationship.  Then you can drag the mouse or windows across with in that "space".  This is extended desktop mode and I recommend that to be able to use all the available screen real estate.  However there is a checkbox in the Arrangement to run in mirrored mode.  Now the two images are identical on both screens albeit the max screen size is determined by the smallest screen in the mirrored set.  You would of course have the menu bar on both screens since they are mirrors of each other.  But I think it's a waste of good screen real estate.

Maybe you are looking for