How to get work center

Hi All,
I am creating r actual and planned renue report for service orders ( CS ) .
Problem :
I have a service order number , But i am  unable get the workcenter of the order.
Please guide me how to get the workcenter based on service order.
Thanks in advance
Regards
Sudhakar

Dear Sudhakar,
Try using this FM: CR_WORKSTATION_READ
Field: GEWRK (Object ID of the Work Center)
View: VIAUFKST
Regards
s@k
Edited by: siemens.a.k on Feb 11, 2010 10:18 AM

Similar Messages

  • How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

    How to get work JavaFX WebViewBrowser sample in debian linux wheezy
    You may also check latest version of this problem here... 
    The Starting point I have
    Debian wheezy
    java version "1.7.0_40"
    Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
    Java HotSpot(TM) Client VM (build 24.0-b56, mixed mode)
    GTK version: 2.24
    NetBeans 7.3.1
    Certified configuration acording to JavaFX Supported Configurations
    is
    Ubuntu 10.4 +
      gtk2 2.18+
    GTK is OK. do I require ubuntu?
    first try: by  downloading Java SE Downloads - javafx sample
    Let's try it
    zolta@zolta:~/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40$ java -jar SwingInterop.jar
    # A fatal error has been detected by the Java Runtime Environment:
    #  SIGILL (0x4) at pc=0x9b6b4c22, pid=21172, tid=2658700144
    # JRE version: Java(TM) SE Runtime Environment (7.0_40-b43) (build 1.7.0_40-b43)
    # Java VM: Java HotSpot(TM) Client VM (24.0-b56 mixed mode linux-x86 )
    # Problematic frame:
    # C  0x9b6b4c22
    # Core dump written. Default location: /home/zolta/dolgaim/IT/NetBeansProjects/javafx/javafx-samples-2.2.40/core or core.21172
    # An error report file with more information is saved as:
    # /tmp/hs_err_pid21172.log
    # If you would like to submit a bug report, please visit:
    #   http://bugreport.sun.com/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    Terminated
    Let's see what core dump says
    to be continued...

    Gusar wrote:
    We need *a lot* more info than that. Could be something very simple, like the interface being up before starting wifi-menu (netctl doesn't like the interface being up, it'll only start correctly if the interface is down).
    Or it could be something more. In which case, you'll need to start wpa_supplicant manually with debugging enabled:
    wpa_supplicant -i wlp18s0b1 -c <(wpa_passphrase MYSSID passphrase) -d
    Once this says you're connected, open another terminal and start dhcpcd. Or, if wpa_supplicant doesn't manage to connect, post the *entire* output.
    Edit: Ok, you posted more info as I was writing my post. Will look through that, maybe it contains something useful. If not, follow the instructions above.
    Edit2: Nope, nothing about wireless in there, except that the driver loaded.
    It worked!!
    I was looking into the logs and found an authentication failure...my password is very long so I made some mistakes while typing it.
    So this is the solution all the way:
    SOLUTION:
    - No need to install or load any external drivers (all I used was already in the base installation)
    - DISABLE THE HIDDEN NETWORK OPTION IN THE ROUTER (thanks for the heads-up @Gusar)
    - run "# wifi-menu"
         or
           "# wpa_supplicant -i [interface] -c <(wpa_passphrase MYSSID passphrase) -d"
    - run "# dhcpcd [interface]"
    - Good to go!!
    I'm sorry for the trouble guys, and like I imagined, it was really easy and now I see my newbiness hahaha ;D
    Thanks.

  • How to construct Work center Hirerchy in Production Planning.

    Hi Experts,
    How to construct Work center Hirerchy in Production Planning.
    Thanks in advance.

    Amit,
    I guess you must have overlooked the rules of engagement for this forum. It is customary for questioners to first perform basic research before posting any questions.
    First, search in the forums (search box in the upper right of this page). FYI The question you raised has been covered dozens of times.
    Next, check online help. This help is generic, and not generally specific to a particular industry:
    http://help.sap.com
    Work Center Hierarchy:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/b1/c037ae439a11d189410000e829fbbd/frameset.htm
    Next, look for generic solutions solutions in Best Practices. Basic index at
    http://help.sap.com/saap/sap_bp/BL_IN/html/Content_Library_BL_EN_IN.htm
    Next look for industry specific solutions in Best Practices:
    http://help.sap.com/content/bestpractices/industry/index.htm
    If you are experiencing a problem, or you believe that SAP is not working per the online help, you can then search OSS notes.
    http://service.sap.com/notes
    Next search in one of the standard online search engines (such as Google).
    Only after you have performed all of these tasks, and studied all of the online help that is supplied for free by SAP, should you then consider posting a question to these forums.
    If you are unwilling or unable to perform such research, then you should probably engage a consultant to assist you. All consultants use searches to assist them in designing and executing solutions. If you intend to one day become a consultant, you would be wise to cultivate this skill.
    Best Regards & Good luck,
    DB49

  • FM to get work center information from routing

    Hi all,
    Is there any FM to get work center information from routing?
    Points assured.
    Thanks and regards,
    Nilesh

    Use This FM
    CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
    Use table CRHD ,MAPL
    Please reward if useful.

  • How to get Work schedule repor of employees

    Hi all
    Can any one help me out in
    how to get work schedule report of employees who are works in different shifts in an organization.
    Thnks in Advance
    Anusha

    Hi Anush,
    Find the SAP Standard reports for Work schedules:
    - PT03 - Display Work Schedule
    - PT63 - Personal Work Schedule (even PT61 also helpful as biswajit said)
    - PT_DSH20 - Daily Work Schedule
    Otherwise you have Time Manager’s Workplace/ Ad Hoc Query reports to view detail reports, which are user friendly for maintain time data.
    TC for Time manager’s workplace is PTMW
    TC for Ad-hoc query is S_PH0_48000513
    I suggest you to go with Ad-hoc and select all fields that what ever output you want and view the results (even you can upload also)
    Cheers,
    TG
    Message was edited by: TG

  • How to find work center in REM from the material Documnet number

    Hi ,
    We want to develop a Z report for the repetitive manufacturing cycle. Please let me know the logic how to get the work center from the material document that is posted after backflushing MFBF tranaction.
    I will elaborate it little further. From the material document number that is genearted out of confirmation from that document no how can I find the work center so that we can so show the throughput of each work center.
    Please avoid standard transaction of MCRP etc.
    Thanks & regards

    Dear Kumar,
    I'm not sure whether you can get the work center details,but you can get the production version number from you can get the
    rate routing details.
    Give a try by passing the document no to table BLPP and get the document log number and pass on the document log number to
    table BLPK,by which you can identify the production version.
    Also give a try using this FM,RM_DISPLAY_AFRU_REM,I guess you can get the exact work center details from here.
    check and revert back.
    Regards
    Mangalraj.S

  • How to get profit center in fbl5n in ecc6.0

    hi
    in the dynamic selection screen, in documents i am not able to get the profit center.can any one tell how to get it?

    When you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
    Reward points if useful, get back in case of query...
    Cheers!!!

  • How to manage work center in Production order

    Hi,
    I am producing a material having one operation (suppose cutting), which I have mentioned in the routing. I have also mentioned the work center in routing on which cutting operation will be performed. When I make the Production order of 1000 pcs there comes only one work center. But practically, they are producing these 1000 pcs on two different work centers ( 500 on one and 500 on second). How to manage this in SAP.
    Kindly help me.
    Thanks and Regards,
    Yogesh Singla

    Dear ,
    What is the individual capacacity of the Work Centre -CR02-Header -No of Individual Capacity ?
    I think you must be using similar kind of work centre of 2 no 1000 pc .Now , when you are creating routing for this , you should hit Required Spilliting in Routing Operation -Select Operation line item  and then Double click -Select Spilitting and enter splitting No 2.
    At the same time in CR02-Work Center -Capacity Tab -Hit the Header -In the Bottom of the Detail Capacity Header -Avaialabile Capacity -Include 2 as Number of Inidvidaul Capacity  and SAVE.
    Now based on thr required spilittinga and invidual caapcity , it will consider the Work Centre Load .
    Other wise , you can enter one more operation line in routing with similar Labor hrs , work center and control key in routung for production of 1000 pc  .
    Hope it clarifies
    Regards
    JH

  • How to get cost center group from cost center

    Hello
    I have cost center and i need to get the cost center group.
    Anyone having an idea how to get it???
    Thanks
    Parvez

    Hi,
    Cost centre could be assigned to different cost centre groups. For standard hierarchy, you can retrieve it from CSKS table, but for other groups SETLEAF table (class 0101) will provide you a complete answer.
    Regards,
    Eli

  • How to get profit center group and its description

    According to three tables(as below), i get profit center group, how to get its description&#65311;
    CEPC  (Profit Center Master Data Table)
    SETLEAF
    SETNODE
    PS:(Referrence to teh link fields in table)
    For Profit centre Group ( SETLEAF-SETNAME )
    Select BSEG-BUKRS / BSEG-PRCTR from BSEG.
    SELECT SINGLE SETNAME INTO WA_SETNAME
    FROM SETLEAF
    WHERE SETCALSS = '0106'
    AND SUBCLASS = BSEG-BUKRS
    AND VALFROM = BSEG-PRCTR
    i can get two records, why?

    Hi,
    I am not sure of the significance of this table...
    But looking at the table structure it is having LINEID as one of the key fields..
    So you can have more than one record for the same combination..
    Thanks,
    Naren

  • How to retrieve work center from material document

    Hello,
    For a report I need to display all the backflushs for a work center. Therefore I read table MKPF and MSEG selection the correct mouvement code, and from here I need to find the production version in order to get the work center.
    However I can not find this information in MKPF or MSEG. Material document is associated to a CO Production order but field AFPO-VERID is empty.
    Can someone provide me the correct path to read table MKAL starting with MKPF/MSEG.
    SAP version is ECC6 and we run repetitive manufacturing.
    Thank you.

    Hi,
    The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
    Hope it helps.
    Chang

  • How to get work item details programatically ?

    Hi All,
    I have a list of work items (process instances) and I want to retrieve each item details such as: attachments, notes, id, ...
    All the items are filtered and represented as Fuego.Papi.Instance:
    Fuego.Papi.Instance[] inst = busProcess.getInstancesByFilter(filter : instFilter);
    But the work item details are inherited from Fuego.Lib.ProcessInstance. So, how to get the item details from inst[] ?
    Would appreciate any help, may be Dan will have an advise ?
    Regards,
    Kim

    If you have instances returned by your filter, you could extract variable information for each instance by doing something like this:
    for each inst in getInstancesByFilter(ps, filter : instF) do
        // here's how to get the value inside a primitive instance variable
        orderAmtObj as Object = getVar(inst, var : "orderAmount")
        // here's how to get the value of attributes inside a complex BPM Object instance variable
        //    - in this case this is an "order" object with two attributes (customerName and amount)
        orderObj as Object = (getVar(inst, var : "order"))
        xmlObject = Fuego.Xml.XMLObject(createXmlTextFor(DynamicXml, object : orderObj, topLevelTag : "xsi"))
        logMessage "The value of the order object's customer name is: " +
               selectString(xmlObject, xpath : "customerName")
        logMessage "The value of the order object's order amount is: " +
               selectNumber(xmlObject, xpath : "amount")
        // here's a rather uninspired way to retrieve who the participant is that was assigned the instance
        logMessage "The participant assigned to this instance is: " + inst.participantId
    endInside the above "for" loop, you could retrieve these predefined variables (this example assumes you use "inst" in your "for" loop):
        objRet as Any
        objRet = inst.getVar(var : "PREDEFINE_ACTIVITY")
        logMessage "Activity name = " + objRet using severity = DEBUGSubstitute "PREDEFINE_ACTIVITY" in the above logic to get this information:
    PREDEFINE_PRIORITY (priority)
    PREDEFINE_ACTIVITY_DEADLINE (activity.deadline)
    PREDEFINE_CREATION_TIME (creation.time)
    PREDEFINE_PROCESS_DEADLINE (deadline)
    PREDEFINE_DESCRIPTION (description)
    PREDEFINE_PROCESS (process)
    PREDEFINE_RECEIVED_TIME (receptionTime)
    PREDEFINE_PARTICIPANT (participant)
    PREDEFINE_COPY (id.copy)
    PREDEFINE_STATUS (status)
    Similarly, you might want to try to get instance information using the Fuego.Papi.VarDefinition object a try. Never used it, but the logic might be as simple as:
        logMessage "who created? = " + inst.getVar(Fuego.Papi.VarDefinition.CREATOR_ID) using severity = DEBUG
        logMessage "does it have attachments? = " + inst.getVar(Fuego.Papi.VarDefinition.HAS_ATTACHMENTS) using severity = DEBUG   
        logMessage "does it have notes? = " + inst.getVar(Fuego.Papi.VarDefinition.hasnotes) using severity = DEBUGDan

  • FM / TABLES TO GET WORK CENTER DETAILS

    hi friends,
                  can any1 suggest me functional module or tables where i can fetch work center details like we get in CA03

    Use This FM
    CR_WORKSTATION_READ_ROUTING,ROUTING_DISPLAY
    Use table CRHD ,MAPL
    Please reward if useful.

  • How to assign work center to class

    hi any one tell me how to assign w c to class

    Mukesh,
    In the Workcenter Create(CR01) or Change mode (CR02), in the basic data tab down you will find a function button "Classification" hit this button, system will prompt for Class assignment.
    Class Type for work center is 019.
    Regards,
    Prasobh

  • In GP how to get work items in outlook inbox

    Hi,
    Any one can explain me how to send work items to Outlook Mail. This option is there in ABAP work flow. I need solution in GP.
    Please give any sloution.
    Thanks,
    Sunil

    Hi Jonathon,
    in our last project, we faced the same problem and resolved it with a standard notification CO:
    - we put a notification CO (+ action) in front of the action you mentioned (that one that generates the UWL's workitem and provides the CO for manual processing)
    - the notification's addressee will be the current processor, who is also the guy to do the manual processing
    - the notification email contains a link to the process' current workitem, which is the action you mentioned (e.g. a webdynpro form or whatever the manual processing is)
    The result is, that there will be an automatically sent notification, followed by the normal manual processing. And our client was happy to be able to customize every single email.
    See this link for email administration: http://help.sap.com/saphelp_nw04s/helpdata/en/43/f9097d1b607061e10000000a1553f6/frameset.htm
    Best regards
    Daniel

Maybe you are looking for

  • Capture video from camera (Sony HVR-A1U) to Premier -Premier Crashes

    I have Firewire connected between the video camera and my mac. Usually I capture my clips easily - they are shot on mini HDV tape. But today it causes the whole program to freeze and I have to Force Quit. The camera is on and connections on before I

  • How do I add an outline around an image in Elements 10

    I have an image that I created via Elements 10... The main body of the image is black and I am wanting to add a white outline around the image so I can place the image on a black background... Can someone advise how to add an outline including colori

  • Datareader is not able to connect with database-Urgent

    Hi All, All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error: [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.Erro

  • How do I set the delimiter to Tab in a etext template?

    HI , I would like to set a tab delimiter for an etext rtf template. Does any one know what section do I enter the parameter to do this (format,data level, detail, does it matter)? Also what is the correct snytax and the value for the tab delimiter? T

  • Avoiding a bridge too far on new Mac

    Hello I have Design Standard CS4 and the upgrade to CS5. I'd like to install CS5 on a new Mac, but also install InDesign CS4 from the previous suite (since I may still need the older version). To do this I was planning to first install CS4 on the new