Flexible Browser Width never worked

Hi,
I have been using Muse for some time, through various versions and the flexible browser width feature has never worked for me. Generally most sites i design are 960 wide with centred content and the handles of the selection never turn red to indicate the feature. Any help would be appreciated.
Thank you

I don't know if this helps your problem: http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/
she explaines it at 3:30 minutes. The rest is not what you need.
good luck!

Similar Messages

  • Design for flexible browser width for the diashow?

    design for flexible browser width for the diashow?

    I placed a box (with the rectangle tool) tiled it with a png. but when I stretch it out I don't get a red line indicating I am at the end of the browser.  Am I doing something wrong?

  • Design for Flexible Browser Width | Adobe Muse Feature Tour | Adobe TV

    For full control over your design, you can set elements to display at 100% browser width so the design adapts to the size of the browser window.
    http://adobe.ly/I5cONQ

    I placed a box (with the rectangle tool) tiled it with a png. but when I stretch it out I don't get a red line indicating I am at the end of the browser.  Am I doing something wrong?

  • How can I flexible browser for the diashow?

    how can I flexible browser for the diashow?

    I´m sorry my english... I will try.
    the diashow is like a picture static with the window of the homepage.
    I would like that if I skale the browser window the slideshow growth with.
    like this:
    http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/eng/

  • When will 100% browser width work on widgets in Muse?

    Hi!
    I would love it if the widgets in Adobe Muse would work with 100% browser width, for example buttons! Is this going to happen in the nearest future?
    Best regards,
    Åsa

    Hi Asa,
    There are certain widgets that can be used with 100% browser width like the  'Menu widget' , The 'State Buttons' , The 'Slideshow Widget' etc . Please refer to this screenshot in case you are using the state buttons :- http://prntscr.com/52vszt
    Also, if you wish to see the 100% width option available for all muse widgets, I would request you to post this as a feature request here :- Ideas for features in Adobe Muse
    Regards,
    Rohit Nair

  • New Browser Window not working on My Mac Intel pro

    I have set a behavior in Dreamweaver CS3 to open a new
    browser window to a set size and to only show scroll bars if
    needed. I have left all other attributes unchecked. This is not
    working for me. Can you tell me how to make a new browser window to
    my settings using the behaviors in Dreamweaver CS3? I do all the
    steps right. what do I do when I follow all the steps for setting
    up a new browser window correctly and it doesn't work!? The new
    browser window never pops up even when i use an image map. The
    Behavior is not working correctly and I even re-installed
    Dreamweaver CS3. I am on an intel based mac pro. Running Firefox
    version 3 and Safari 3.1.2 on Leopard. I have done this several
    times before and it has worked. but that was before Leopard. Here
    is my code:
    <area shape="rect" coords="4,3,78,77" href="#"
    onClick="MM_openBrWindow('images/02.jpg','','width=378,height=504')">
    The only way I can get it to halfway work is add it into the
    link area
    on the properties panel. The window will then open but not to
    the
    specified size.?
    please advise as this is taking a long time to figure out!?

    Schafer Design wrote:
    > Yes site is live! However I have been able to figure out
    how to make them pop
    > up with the picture in the new window but now it will
    not fit to the size of
    > the picture? I think it is time to take it live so I can
    see how it acts on the
    > server. the site is
    http://www.davidmyersdesign.com.
    Also having a rollover
    > problem on the portfolio and contact page.
    > Dreamweaver is not so dreamy to me right now!
    >
    This is an unusual way to go about doing this. Typically you
    simply put
    the thumbnails up on the page rather than combining them into
    a collage
    and then adding imagemaps to that.
    Nevertheless, it can be done.
    You have code like this:
    <area shape="rect" coords="0,0,80,80" href="images/12.jpg"
    target="_blank"
    onClick="MM_openBrWindow('images/12.jpg','','width=378,height=504')">
    Try adding
    ;return false
    to each like this:
    <area shape="rect" coords="0,0,80,80" href="images/12.jpg"
    target="_blank"
    onClick="MM_openBrWindow('images/12.jpg','','width=378,height=504');return
    false">
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Muse 7.0 plus Chrome: browser does not show images full browser width

    Hi there,
    I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
    Of course I already restarted application and computer. System: Mac OSX Mavericks.
    What to do now? The presentation with the client is very soon and this bug makes me very nervous.
    Best,
    bartl

    The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
    As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
    That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
    If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
    Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
    I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
    On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

  • In browser editing not working on some sites

    Hi. A client of mine wants to use in browser editing for a site I created in Muse CC 2014 so I tried to test it out.  I log in successfully to In Browser Editing but nothing on the site is editable.  When I log in to my own site through in browser editing it works exactly as it should so I am really puzzled.  Both sites were created in Muse CC 2014 and constructed in similar ways. The only difference I can think of it that they are hosted by different companies:
    My site - IBE works - hosted by GoDaddy - Q Services Design - Home
    Problem site - IBE doesn't work - hosted by Network Solutions - Batesville Civic Center - Home
    BTW, the site I am having problems with uses a web-safe font (Arial) so that shouldn't be an issue.
    Any suggestions? Any input would be greatly appreciated as I sold this site to the client based on the in browser editing capability.
    FionaQ

    I just logged in to my "problem site" to take a screenshot and it is now editable. I'm not sure what was going on earlier as I logged in and out a few times and never could edit … But all is well.  Hopefully this was just one of those glitches.  FYI the browser I was using when it didn't work (and when it did) was Safari 6.1.6.
    Thanks for your speedy help.
    Fiona

  • HT1677 In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

    In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Buttons not working; then losing connectivity on certain apps, but the browser continues to work

    For Torch 9800: only the touch screen buttons are working. The entire keypad and the top 5 buttons (menu, send, etc) were not working. I did several battery pulls and it finally started working. However BBM, FB, WhatsApp, BB App Store stopped working, but the web browser was still working, so it was not a connectivity  problem. Then the keyboard problem started again. I did another battery  pull and is started working again, but still to access to FB, BBM or Whatsapp, App word. Please help.

    Hi and Welcome to the Community!
    Wow...lots of problems there...and impossible, without some significant diagnostics, to deduce just what the culprit it. It could be hardware, it could be software, it could be moisture intrusion, it could be other things, it could be a combination of things.
    So, first off, do you at all suspect moisture intrusion? If so, then
    REMOVE YOUR BB BATTERY NOW!!!
    Run, don't walk, to this FAQ:
    http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
    Do everything it says, including waiting the maximum recommended time. Applying power to your BB between it getting wet and doing this process reduces the chances of success. Further, the only thing predictable about moisture intrusion into a BB (indeed, any electronic device) is that the results will be unpredictable. I've seen some come back up right away and be fine. I've seen others never work at all. I've seen still others run for a bit, and then die later. And every thing in between.
    If you are 100% certain of no possibility, even remote, of moisture intrusion and/or you have done the above and there is no change, then the next thing to try is a clean OS reload. What I suggest actually is to reload your OS clean -- as "bare bones" as possible...no add-on apps, no extra things, no themes, truly bare bones. Then, if the behavior immediately presents, you can stop as you then know that it's either hardware or un-fixable moisture intrusion. On the other hand, if the behavior does not immediately present, then run like that for perhaps a week...long enough to be convinced that the behavior will not recur. Then, after that week, add just one thing...only one, no matter how tempting it is to add more. Run again for another week if the behavior does not present. Once the behavior does present, you know your culprit! I realize this is tedious, but you have a special problem, and special diagnostics are IMHO required.
    So, to do that OS reload, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Please make it easier to position images in height and have them adapt to browser width!

    Maybe I'm missing a method but I have now long enough stumbled on something I would think obvious to exist within the program.
    I just want a highres intro image to pop up. i want to position it a bit down from the vertical center, but it should fill out left and right.
    1. Tried using slide shows, but Lightbox won't autostart without clicking thumbnails first. Only fullscreen lightbox has this ability for some unexplicable reason. Please make the non fullres lightbox available for immediate popup without having to click thumbnail.
    2. Tried using background browser fill. Works to a degree, but I can't control the image's vertical position.
    3. Tried using a 100 % width box and fill it with my highres image. But this wont work for this utterly strange reason:
    If I use a 960 px page width as my template, create a box 100% width, I try filling it with my image and tell it to scale to fill. But here's the bummer: If I resize my browser window to accomodate a 2560 px wide screen - my highres image was shredded when I assigned it to fill the 960 px wide box. It's looking a disaster at 2560 resolution. Please allow the image fill to retain it's original size and be able to rescale to smaller sizes instead.
    Because downward scaling doesn't seem to work in fills.
    So to boil it down: I want to be able to make a box and set it to 100 % browser width in the entry box, not having to graphically drag it out to whatever page width I'm currently using in Muse. I should be able to fill it with an image of any size, without Muse making any decision and downsampling my image, making it unusable for 100 % width display on high resolutions.
    Please consider this!
    T

    >@Ian Lyons: I can't drag the panels but the scroll-wheel on my mouse works fine...far better than it did in LR1.
    Agree--when LR is on the main display, but the scroll wheel does NOT work for scrolling the panels when LR is on the 2nd display. I don't know if this is intentional or an oversight or just a situation I experience, but I have experienced it with all versions of LR and in both XP and Vista.
    Note that the scrolling of the side panels isn't the only thing that doesn't work properly with the scroll wheel when LR is on the 2nd display--the thumbnail panel doesn't scroll when on the 2nd display, either. However, using the scroll wheel to adjust brush sizes works fine on either display as does scrolling the thumbnails in the Grid view.

  • Can the 100% browser width function be used in non-master pages?

    Can the 100% browser width function be used in non-master pages? I watched the video about pulling it to the red edges, and did that on some of my parent pages, but when I preview the page in browser, it doesn't work. I can still see my browser edges.
    The idea for the website I am designing is to have different full browser width images for different pages, and I'm looking for a way to do that. I would create a different master for each page, but there are more than 20 pages...too many master pages! Thanks!

    Hi Lindsey,
    The 100% width feature works with rectangles and text frames on both master pages as well as regular pages. It doesn't work with images in either case. A possible workaround would be to use a rectangle with a background image, depending on the nature of your image.
    Regards,
    Nathan

  • "safari web browser has stopped working" ... help?

    So a number of months ago (5, I believe) Safari Web Browser crashed and I tried opening it and a message popped up that said:
    +Microsoft Windows:+
    +Safari Web Browser has stopped working+
    +A problem caused the problem to stop working correctly. Windows will close the program and notify you if a solution is available.+
    Now up until the crash, I was extremely satisfied with Safari and it was my default internet browser. After I kept seeing this message when trying to start Safari, I decided to uninstall it and reinstall it, then tried repairing it several times. It kept showing the same message for a while so I decided to give up for a few months, so I tried again and the same thing happened. Once again I gave up and today I tried again when I updated my iTunes and that same message popped up and Safari didn't work.
    So I decided to post here to see if someone can help me figure out and fix the problem since I prefer that browser to most and never had any problems with it until I froze it and it crashed that number of months ago.
    Thanks and your help is greatly appreciated.

    Hi,
    I'm afraid I'm not familiar with Vista, but in XP the Safari preferences etc. are stored in this location:
    C:\Documents and Settings\YourUsername\Application Data\Apple Computer\Safari\
    If you know where the equivalent Vista location is, rename the Safari directory to be Safari_backup and then retry launching the application to see if one of the files in there is corrupt and causing Safari to crash.
    If it does work after doing that, try moving the files one by one back from the Safari_backup directory to the newly created Safari directory, restarting Safari each time, until you find the problematic one.

  • Image won't adjust to browser width

    Hi,
    I have placed an image in the footer of my master page. In design view it spans from left to right of the browser, but in preview it no longer fills the browser. What can I do to make sure it does?
    - When placing the image I made sure it hit the red lines of both left and right browser edges.
    - I made sure "footer item" was selected (this doesn't seem to make a difference either way)
    - I have tried both "fill to frame" and "fit to frame" options
    Here is what it looks like in design view:
    And here is how it turns out in preview:

    Hi
    Have you placed the image and stretched it for 100% width or you have used rectangle fill with 100% browser width ?
    Can you please try with a rectangle fill with 100% width ?
    Also does it works when you select scale to fill ?
    If still same, please select the footer item with fill options open and upload a screenshot.
    Thanks,
    Sanjit

  • Scale website to fit browser width

    Hi I'm new to Muse.
    There is something i have been trying to do, but can't make it work.
    I know about the possibility of full screen and 100% width slideshows. But that is not exactly it.
    What I can't figure out is how to make a website that fits and scales with the browser width (scalable). Is that possible in Muse?
    Something like this. I have found this as a reference, perhaps it can help explain what I mean.
    http://2xelliott.co.uk/

    What you are looking for is called 'Responsive' Design. This is not currently an option in Muse however you can easily create tablet and phone versions of your site.

Maybe you are looking for