FM or BAPI for Output Type Creation mannually

Hi All,
Is there any FM or BAPI to create output type after creation of Inbound Delivery for that delivery, Normally it is automatically assigned, but I will stop the same , and wanted to create Output type mannualy through  ABAP program. Therfore can any one help me on this.
best regards
tanmay

Hi,
Try using FM WS_LM_TRANSFER_ORDER_CREATE.
I hope this is available in ur system
Thanks

Similar Messages

  • Creation of Process code for output type

    Hi,
    Could someone help me out in defining processcodes for output types.
    Thanks in advance,
    Yaseen

    Hi Yaseen,
    The Tr.code WE41 and WE42 are also used for maintaining process codes.
    To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
    FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
    Hope this helps.
    Rgds,
    Sam Raju
    Message was edited by: Sam Raju

  • IDOC/BAPI for Production order creation from Legacy system

    Hi all
    We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
    thanks a bunch

    Hi John,
    For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
    If there is an inbound IDoc available, I would recommend to use an IDoc.
    IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
    BAPI is also good approach to use and fast in term of  processing.
    For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Is there any Bapi for Physical Sample creation

    Hi Folks,
    Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a  physical sample......
    Any ideas or suggestions would be appreciated..
    thanks
    chaithanya.

    HI Chaitanya,
    You can use : BAPI_BATCH_CREATE
    it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
    Regards,
    -Venkat.

  • Prevent Output type creation as Sales order save

    Hi,
    I have a requirement in which i have to chek certain conditions and on that basis i need to stop the creation of output type for Sales order. My code is written in Sales order user exit(Form SAVE_DOCUMENT). Please let me know how can i achieve this.
    The requirement routines are called before the user exit is called...so it does not seem to be possible to call routine afterwards.
    Is there a way in which we can calll the requirement routine again?? Or please suggest some other way
    Thanks
    Saurabh

    hello, friend.
    what are the conditions you are checking for?  and what would be your reasons for not creating an output type?
    not being an ABAPer, i cannot claim to be an expert.  but i think it is possible that instead of the user exit, you could program that the condition check be conducted from within the requirement itself.  the standard requirement "2" for output type BA00 checks for order confirmation, for example.  of course, the use of the requirement assumes the output type has been created, but will not be printed or be issued if the requirement conditions are not satisfied (the output indicator color will remain red).
    regards.

  • Can u tell me any predefined BAPI for change and creation of Material

    Hi,
        Can anybody tell me  predefined BAPI for change and creation of Materialmasterand Pricing?
    Thanks & regards,
    Gopianne.

    you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
    When changing material master data, you need enter only the material
    number.
    In the header data, you must select at least one view for which data is
    to be created. Depending on the view selected, you must maintain other
    required parameters. If you do not enter values for all of the required
    parameters, the method is ended with an error message.
    The corresponding fields in the tables (such as CLIENTDATA) must first
    be supplied with data by the calling program. An indicator must also be
    set for each of these fields so that the data is written to the database
    by the method. This requires the calling program to supply the
    corresponding field with the indicator in a checkbox table (for example,
    CLIENTDATAX). Checkbox tables exist for tables that do not contain any
    language-dependent texts (MAKT, MLTX), International Article Numbers
    (MEAN), or tax classifications (MLAN). Several data records for a
    material can be created in these tables.
    regards
    vivek
    reward points if it helps

  • BAPI for Outbound Delivery Creation with reference to Sales Order

    Dear all,
    I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
    I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
    However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
    Thanks.
    Steven
    Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
    Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

    Not required anymore

  • BAPI for Service order creation

    Hi ,
    Please tell me if any Bapi for service order creation  , T-code : IW31
    regards,
    Prakash

    Hi Prakash,
    Have a look on the following BAPIs:
    BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
    BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
    WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
    Hope this will help.
    Regards,
    Nitin.

  • Maintain archiving parameter(s) for output type RD00(appl.V3)

    Hi Guys,
                 While trying to get the output for billing documents I'm facing a error : Maintain archiving parameter(s) for output type RD00 (appl.V3)
    Diagnosis
    At the time of output determination,the archiving parameters for output type RD00(application V3) were incorrectly maintained in customizing.
    Additional information:
    SAP object:
    Archiving object:
    Procedure
    Maintain the archiving parameters and repeat output determination for the required document.
    Expecting the solution.
    Regards
    Raj.

    Can you check what you have in the Storage System Tab in the fields Storage Mode and Document Type.
    It should be Print Only and SDOINVOICE respectively.
    Thanks

  • Invoice list: What is the standard setting for output type LR00 ?

    Hello all,
    They have messed up our system. What are the standard settings for output type LR00 ?
    Program RVADIL01,
    Form ??
    Thanks
    Rad

    Dear Rad,
    > Program RVADIL01,
    > Form - SD_INVOICE_LIST
    Thanks,
    Raja

  • Please Tell  me the Standard Bapi for Purchase Order Creation

    Hi,
      Please tell me the standard BApi for the PO creation. How to excute the standard Bapi. Please help me.
    Regrads
    Mohan

    Hi Mohan,
    Use this BAPI BAPI_PO_CREATE1.
    Check this post, you have program aswell
    https://forums.sdn.sap.com/click.jspa?searchID=7294168&messageID=1172796
    Regards,
    Satish

  • Logic for Output type determination of shipment

    Hi All,
    I have a requirement where in when a shipment is being saved (on create/change) i need to put a logic in an enhancement to identify if a particular set of output types will be generated or not for that shipment.
    Any info on how i can do this? Is there any FM that can fetch that data.
    Thanks.
    Ashiq Ali

    T. Code  VOFM
    Requirements > Output control
    Check routine 605
    Chek this where you can find some logic for Output type detremination of shipment type
    ~P

  • No processing log for outbound delivery for output type

    Dear Gurus,
    I want to see processing log for output type for outbound delivery .
    But when i click processing log push button for output type for outbound  delivey  , one error is comming as 'NO PROCESSING LOG FOR OUTPUT TYPE'.
    Could you please let me the reason ?
    Edited by: susheelkodam on Sep 9, 2010 10:33 AM

    Hi,
    What transaction are you running when you press the [Output log] button?  If you're in the create transaction, then I think the output log should be available but if you subsequently go in to VL02N and press the Log button, the I don't think the log is available.
    Regards,   Andy

  • Regarding the 'Dispatch time' settings for output type...

    Hi Experts,
    May i know what 'Send with application own transaction' means when we configuring output type in SPRO for 'Dispatch time'.
    Cause i knew if we set it as 'Send immediately', then this output type will be triggered upon saving the orders.
    But i dont know what that item for..Could you kindly help me on this...
    What it means if we set the dispatch time as 'Send with application own transaction' for delivery output..??
    Thank you very much.

    Hi,
    If you choose 'Send with application own transaction'  when maintaining condition record for output type,during order,delivery and invoice saving the output type signal is yellow,that means unless you select that output and trigerred for printing it will not goto the spool.i.e in simple words the output is for manual printing.......
    Let me know if you need any clarifications on this..
    Regards,
    Chandra

  • No archive exist for output type YWNK

    Hi,
    in order to see the output message (print) I click on the print icon within contracts (T-code ME33K).
    I get the message 'No archive exist for output type YWNK'. How else can I see the output print. I have
    to preview the output. What is wrong in this case. What has to be made. Pls help.
    Regards
    Marco M.

    Hi
    Try to check if that message was uploaded in the contract you need to see else u need to create it
    Max

Maybe you are looking for