FM to catch the WF container data?

Hi All
I need a FM to catch the WF container data. but the input to the FM should be WF templete No. and the status of WF like "STARED/ COMPLETED"
Thanks,
Kakoli.

Hi Kakoli,
If you know the object type and key you are working with then you could use SAP_WAPI_WORKITEMS_TO_OBJECT to retrieve the relevant workflows based upon the workflow template(s) you specify in the TASK_FILTER table. You could then filter the workflows retrieved by status.
FM SAP_WAPI_READ_CONTAINER could then be used to retrieve the container data.
Best Regards,
Trevor

Similar Messages

Funtion module to catch the workflow container data

Hi All
I need a FM to catch the WF container data. but the input to the FM should be WF templete No. and the status of WF like "STARED/ COMPLETED"
Thanks,
Kakoli.

Hi Kakoli,
If you know the object type and key you are working with then you could use SAP_WAPI_WORKITEMS_TO_OBJECT to retrieve the relevant workflows based upon the workflow template(s) you specify in the TASK_FILTER table. You could then filter the workflows retrieved by status.
FM SAP_WAPI_READ_CONTAINER could then be used to retrieve the container data.
Best Regards,
Trevor

Conditional formating if the cell contains any date

Hi,
In my excel sheet i have one column containing only date (US format) or else they are blank. I want to format the cells containing date to Red color. How do i do it
Please help

If you mean the font colour, just format the cells to have red font.
So I guess you mean interior colour.
You haven't said which version of Excel - it always helps.
For Excel 2003, for example, select the cells then
Format > Conditional Formatting > Cell Value Is > Greater Than: 0 > Format > Patterns > Red
For Excel 2007 or 2010, Home > Conditional Formatting > Highlight Cells Rules > Greater Than > 0 with Light red fill
Bill Manville. Excel MVP, Oxford, England. www.manville.org.uk

Setup Cluster using Solaris Container data service

We have a two-node cluster that we would like to use to create either a zone cluster or use the Solaris Container data service that would create a scalable (or multiple master) data service of two zones, one on each node. We have an app running in the zone, CiscoWorks, that has a local database of jobs that are scheduled to run to configure Cisco switches. I was curious how we setup the storage. If each zone is running on local disks, how do the zones stay in sync and the database updated with job information? Would I setup a device group of the disks where the zones will reside on each node? Can I use SAN as the local disk so the zones can be replicated to a Disaster Recovery location?
Thanks for any help,
Chuck

Chuck,
Sadly, I think I'm going to make your implementation decisions a lot more complicated because there are three ways you can use zones within Solaris Cluster.
1. Create a failover zone using the HA Solaris Container Data Service. Here the zone root moves between the cluster nodes as the zone fails over.
2. Create static zones between with resource groups can migrate. Each zone root is local the the physical node. However, the configuration of the zones can be subtly different.
3. Create a virtual cluster using static zones within which resource groups can migrate. Each zone root is local the the physical node. However, the configuration of the zones are forced to be the same.
Note also, that a ZFS zpool can only be mounted on one node or zone at anyone time, although it can be mounted read/write in one zone and read-only in other zones on the same node (IIRC).
I would be inclined to put your database into an HA configuration, i.e. one that runs on one node at any one time. I would then constrain that in a zone cluster that is bound to a project with restricted resources, i.e. CPUs and memory. Any other tiers of the application, could then be placed either in the global zone (main cluster) or placed in another zone cluster and equally constrained.
I don't know if that's any help. I can recommend a good book on the subject <shameless plug "Oracle Solaris Cluster Essentials"/>. The example chapters should be of help.
Regards,
Tim
---

Access the adobe form data in the workflow container for further processin

HI,
I am using HCM processes and Forms. I need to access the form data in the workflow container once the workflow kicks off.
I need to access these data as would need it for further processing in the workflow.
I know that TS17900110 allows to import form conatiner to
-> WF Container in the field name and value pair. But I need to access a lot more fields than what is in the task. Is there a standard task which allow to retrieve all the fields in the form in one task or do I need to develope a custom class to do that. If so could you please provide some clue as in how to code this specific requirement as i am somewhat new to OO ABAP.
Thanks...

hi,
in the livecycle designer under libary tab u have webdynpro tab--->choose submit to sap button and place it in the adobe form ur designing. u can use this button to trigger the code that u have written in webdynpro java.
for eg if u have
a value node details
and under that two value attr fname,lname
import the model (Insertdata---it has two import param fname and lname)u need for updating the data to r3 system.
in the ctrller have a method submit.Here write the code to insert fname and lname into the db.
IPrivateMyForm.IDetailsElement elem = wdContext.nodeDetails().currentDetailsElement();
Insertdata_Input input = new Insertdata_Input();
wdContext.nodeInsertdata_Input().bind(input);
input.setFname(elem.getFname());
input.setLname(elem.getLname());
try
wdContext.currentInsertdata_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
catch (Exception ex)
{ ex.printStackTrace();}
ul bind details to the datasource.
when u edit ur interactive ui element these attr(fname and lname) vl be visible under dataview tab u can drag and drop them to the form
now add submit to sap button in ur form.
this button correspond to the onactionSubmit dat u have written in the ctrller.
so wen u click this the data vl be inserted
Regards
Jay

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Error Message - "could not complete your request because the preset contains invalid data"

I am trying to open a file, and every time I do it comes up with the following error message:
"Could not complete your request because the preset contains invalid data"
I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
I have tried:
- restarting my mac
- opening different files created at different times
- deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
Any help? Thanks so much in advance!
Pat Dryburgh

The one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset.

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

How do you use the "Item Containing Start/End Date" in a Calendar?

Hi
I want to do a calendar where the days shown will be conditional to a certain interval. Now I though I could achieve that using the Item Containing Start Date of a calendar. But it doesn't seem to work. In the help it says :
Enter an item in the application which holds the start date of the calendar. The format of the date in this item must be YYYYMMDD.
This is what I did here
http://apex.oracle.com/pls/otn/f?p=34530:1::::::
I have 3 fields. 2 for the Start Date and End Date and 1 for the "Date Item" parameter. Only the latter has an effect on the calendar display, the calendar only displays the month of the "Date Item" (in monthly mode).
Wether or not I check "Begin at Start of Interval", it doesn't affect the way those fields are affecting the Calendar.
So, how do we use that "Item Containing Start/End Date" parameter?

Hello,
does yout Script work when you begin with ?:
Start-Process powershell -Verb runAs
Best regards,
Stefan
German Orchestrator Portal ,
My blog in English

Text file contains data separated by pipe symbol read the data and saved in

Hi ,
This is Sreedhar, i am new to java. my query is Report its in text file format it contains data like GLNO,name ,amount. All fields are separated by pipe(|) symbol. I would like to read that
data and saved into the database. Please anyone can help me.

thx Ottobonn.
Scanner is very usefull with string operation like in my problem..but i want try to find java.util.Scanner in j2me, i can't found this class...:(
so, may be i can't use this class in j2me...
i new in java, so i try myself to code the simple method for my problem,
may be anyone can make this class more simple than my coding....:)
public StringPipe(String _msg){
 String message = _msg;
 int pipe = 0;
 int lengthmessage = message.length();
 int lengthMsgresult = 0;
 while(lengthMsgresult<=lengthmessage){
 String msg = null;
 int pipeX = message.indexOf("|");
 if(pipeX==-1){
 msg = message;
 else{
 msg = message.substring(pipe, pipeX);
 message = message.substring(pipeX+1, message.length());
 lengthMsgresult += msg.length();
 // the string seperated by pipe
 System.out.println("msg = " + msg);
 if(pipeX==-1){
 break;
}thx...

"The movie contains an invalid data reference" error in subscribed albums

I'm subscribed to a MobileMe album that contains movies (m4v). Just a few of these movies work well and some other will not play. I get the following error message: "The movie contains an invalid data reference". It seems that these movies are not downloaded since I can't find the original file in my iPhoto Library. For those movies without this problem I can find the original file in the iPhoto Library. It's needed to say that this problems shows up only in iPhoto since I can see all movies at the Gallery app in iPhone/iPod/iPad and also online. Any ideas?

Your profile shows you at 10.5.7. If that's correct download and run the Mac OS X 10.5.8 Combo Update. It wouldn't hurt to reapply it even if you're at 10.5.8.
Also reapply QuickTime 7.5 for Leopard and Compatibility Update for QuickTime 7.5.5.

The file contains file info data which cannot be read and has been ignored

We have been sending images out to contractors, and sometimes when they come back the files are having this error:
the file contains file info data which cannot be read and has been ignored
When I then try to Photoshop Script the file info it throws errors. Does anyone know what causes this error to happen?
Thank you

ok, Thanks!, BUT here's the bigger issue:
We use a lot of Photoshop Scripting, and the file info is how we direct all of our workflows. when a file comes back with "the file contains file info data which cannot be read and has been ignored" error, the scripts are unable to read/write to any of the file info ever again. So not only did we lose all the info already in the file, but we can't use the file at all after this.
Additonally, we tried copying and pasting to new blank documents, but realized we needed all the paths, channels, and sampler points too.
Is there anything anyone can think of to get around this probelm? A setting, or a program to fix the metadata, etc?
Thanks!!!

Regarding infotype 0580 (It's contain the prevoius year date )

Dear Friends,
I am using the infotype 0580(Preveoius emplyee tax detail) but in that infotype to date field contain the wrong date it's contain the previous year date and also this to date field is disabled mode also we not able to change the date .It's gives the error End date precedes start date .
Kindly guide me from where it taking the previous year date from the configuration .
thanks
sandeep

Hi,
The IT 0580, actually works on fiscal year, that is the reason its showing previous year date, let me know the emp joining in current fiscal year or previous fiscal year...
If the emp joins in the Mid of fiscal year, the IT0580 shows "to date as disabled".
please check the dates, its a game of dates only....
Hope you can find the sol within the IT.
- Ashish

Which is the most up to date version of FF that does not include the plugin-container ?

Hi Good People at Firefox
Firstly may I say that you have created a great product which kicked MS's ass for a long time however I'm now concerned that the latest updates are pushing my poor old desktop to the limit.
Upgraded to 4 today and the dreaded plugin container loaded yet again. On a PC with 512k memory and FF's notoriously bad memory management (i.e. it doesnt release memory when tabbed windows are closed) the plugin container is the last thing I need.
So can you tell me which is the most up to date version of FF that doesnt include the plugin-container option ? i.e. the last version of Firefox before plugin container.
I think it was version 3.?? but now I cannot revert to the previous installation to find out.
Thanks
Michael Dalton

You can disable the plugin-container in any Firefox version that uses it.
* http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
You can set the pref dom.ipc.plugins.enabled to false on the about:config page to disable the plugin-container process (OOPP)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

FM to catch the WF container data?

Similar Messages

Maybe you are looking for