FM to find valid warranty for service order?

Hi Experts,
Is there any FM available to find the valid waranty for the Service order?
I knw there is link between warranty and Ibase component. Valid waranty is getting determined while creating service order.
But I need to read this warratny from the serive order created rather than Ibase.
Please help!!
Thanks,
Sushant

Solved .
CALL FUNCTION 'CRM_WTY_MGNT_CHECK'
Thanks,
Sushant

Similar Messages

  • WBS Settlement rule control for service orders

    Hello,
    We have an requirement to implement validation point for service order settlement rule. Currently there is no validation check of settlment rule for service order. So that the settlement is happend to incorrect receivers in service orders.
    For example :
    Service order created for company code - 400 and the settlement rule receiver should be WBS which is belongs to same company code but some case , user are maintained wrong WBS in settlement rule which belongs to some other company code.
    Can you please hlep us on this requirement and suggest any enhencement point avalible on the same.
    Thanks
    Risha

    Hi,
    Please go to okg2,
    Calculate wip or result analysis
    remove the tick for Order In Engineer to Order Production
    Now run result analysis and check whether settlement will not happen for cross company code.
    please check this and revert back.
    Thanking you
    Vengaiah Chowdary

  • BADI for Service Order Validations on Timesheets .

    Hi Experts,
    I am working on the Timesheets - Record working times (CAT2 transaction).
    The Client requirement is that certain validation should be put on the Service Orders / Rec. Orders before an employee can book his timesheet against that particular  Service Orders / Rec. Orders  .
    Currently there are no validations on these Service Orders and the employee can book his timesheets against any service order from the search help .
    Is there any BADI / User Exit through which this can be achieved.
    Thanks

    Solved by self.

  • Validity period for services in ITS

    We are on Extended classic scenario with EBO 4.0 and wanted to have service order created.
    When I log into ITS server
    Shop -> Describe Requirement ->
    I have Description, Internal Note, Quantity, Price, Category and Required on.
    However I want "From date" and "To date" instead of just Required on date
    Is there any configuration setting that needs to be enabled to have validity period for services.
    Any help would be highly appreciated.

    Hi,
    This is strange!At my place,I can see the foll fields when i goto DESCRIBE REQUIREMENT "link:
    Describe Requirement
    You can describe your requirement if you are unable to find it in the catalog.
    Product Type   Goods  Services
    Description
    Internal Note
    Quantity
    Price
    Category
    Required    BetweenOnFrom      -
    Pls check whether any BADI(like BBP_SC_UI_CTRL/BBP_SC_MODIFY_UI )  has been implemented to modify this screen in you system.
    See these related notes:
    Note 976533 - Changing the "Required on"/"Start Date" in shopping cart
    Note 1064560 - Disabling Service Button causes change in Label/header.
    Note 948473 - Change field labels on 'Describe Requirement' screen
    BR,
    Disha.

  • How to configure follow up transactions for service order

    Dear All,
    I want to configure follow up transactions for service order as I already there is follow up transaction
    For Service order below are follow up transactions
    Service confirmation
    Warranty claim
    complaints
    Task 
    If I want to add customized one then how to add ?? as I am not able to find out configure in IMG
    kapil

    Have you already customized Copy Control for your Service Order? If you want to add other transaction types the setting is necessary.
    The customizing path is shown as below.
    SPRO
    -> CRM
      -> Transactions
        -> Basic Settings
          -> Copying Control for Business Transactions
            -> Define Copying Control for Transaction Types
    Regards,
    Web

  • Pricing date for Service Order and Service Confirmation

    Hi,
    I cretated a Service Confirmation as followup for Service Order.
    Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
    I need to check T&C field and Zone field. But, I am not seeing these fields also.
    Can you please let me know, where can I find this fields. (In which assignment block).
    Thanks,
    Sandeep
    Edited by: Sandeep Reddy on May 31, 2010 7:21 PM

    Hi,
    I think by PRICING DATE they mean BILLING DATE.
    In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
    Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
    This is one strategy you can use.
    Regards
    Surendra More

  • Parts reservation for Service Order

    Hi,
    I have a requirement where i need the function module to retrieve the parts reservation for service order if there is any.Otherwise tell me where i can get the parts reservation for service order.
    Thanks in advance.
    Regards,
    Himanth

    Thanks for giving valuable answer,
    what if in the service order i am replacing some spare parts along with services when FERT is not under warranty. How the cost will be transfered to invoice. In my case only one service is transfered.
    i waqnted to transfer cost of components as well..
    Thanks
    SUDIP SInha

  • Req Assignment Tab page not coming for Service order

    Hi All,
             I am working on simple service order SM01 type scenario. where in i am entering the operation & time for the same.
    Now when i am going in to operation detail screen . I am not able to find out the requirement assignment tab page.
    Strangely when i am using same reference object & creating the Maintenance order PM01 & doing the same as above it is showing the req assignment tab page.
    Regards,
    Amar

    Hi , I have found out the solution for the same.
    I have found that the external scheduling flag is   
    set for order type SM01 in customizing. Since this is set, requirement    
    assignment tab will not be populated as this will be taken care           
    externally.                                                               
    Remove the flag in below customising path.
    Plant Maintenance and Customer Service--Maintenance and Service ProcessingMaintenance and Service Orders-Scheduling--External Scheduling--Define for Each Order Type                                                                               
    Once this flag is removed for order type SM01, this tab will appear       
    for service orders.                                                       
    Regards,
    Amar

  • Data Source to get activity type(ActTyp) for service orders.

    Hello friends..
    Could you please provide, with the data source, that can be used to derive activity types (ActTyp),for service orders.
    (Not maintenance activity type (PMACTTYP, in BI))  
    I have checked ZLIS_18_ORDER, where i could find (Maintenance activity type, ILART) but not Activity type.
    Or if we need to create a Genric DS for same, could you ppl please provide me with the table name, to get the Activity type.
    Thank you.
    Raghu

    Thank you Rajesh,
    Could you please lemme know, how can i pick this value, as there is no AUFNR (Order Num) in this table, so that i can pick up using order number.
    Thanks '
    Raghu

  • Total Planned and Total Actual Hours for service order

    Hi,
    Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
    Regards
    SB

    Sorry SB, didn't read your post properly... I thought it was costs you were after...
    AFVV holds the total actual work at operation level.
    PeteA

  • Searching for Service Orders in the Archive in CRM 5.2

    Hi,
    I am trying to enable Searching for Service Orders in the Archive in CRM 5.2, in CRM 2007 this is done by a button being provided as standard and the user is able to toggle between views from the advanced search to search in the Archive. This also comes as standard in PCUI for the 5.0 version. But for the life of me I can seem to find how to do this in 5.2 without having a developer write code to enable the search in archive flag of the BTQuery1O  we are using the component BT116S_SRVO.
    I am trying to use the Archive Search function in SAP WebUi 2006s(5.2) to search for Business Transactions stored on the Archive fiel system.
    Thanks for all your help in advance,
    Kinika

    hi..
    we are also using KO8G and settling orders through background processing. In parametres there are options for period, year etc for selection.
      I could not understand ur problem. you creat a variant for orders to be settled. if you ar not getting the parameters in KO8G cosult ur ABAP consultant to get it.
    kkb/dsp

  • Settlement Rule for service order created based on sales order

    Hello,
    I am creating a sales order and entering  WBS as an cost object.
    After creation of sales order the Service order is created.
    For service order type in the settlement profile  WBS is maintained.
    But the system is not copying the WBS in Service order which is maintained in sales order.
    Can any body have an idea on this?
    Regards
    Abhijit

    Hi,
    As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
    Not what you maintained in account assignment tab of sales order
    When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
    Kapil

  • BAPI for Service order creation

    Hi ,
    Please tell me if any Bapi for service order creation  , T-code : IW31
    regards,
    Prakash

    Hi Prakash,
    Have a look on the following BAPIs:
    BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
    BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
    WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
    Hope this will help.
    Regards,
    Nitin.

  • FM for Service Order

    hi,
    require a FM for Service order Details IW73.
    cheers,
    Aditya.

    Did you try BAPI_ALM_ORDER_GET_DETAIL?
    Regards,
    Ravi
    Note : Please mark all the helpful answers

  • How to find print preview for purchase order like what we find in va03

    hi guru's
    how to find print preview for purchase order like what we find in va03
    let me share ur information
    thank u

    Hi
    You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
    Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
    you will see the print preview
    Similarly for RFQ output use the Tcode ME9A
    for Contrat use ME9K
    for GR output use MB90
    Reward points for useful Answers
    Regards
    Anji

Maybe you are looking for

  • Upload new member in the dimension not from BPC Admin

    Hi Experts,                  If we want to upload a new account not from of BPC admin, how we can do it?     I tried to do it in MS version and was able to do it, as we have a dimension files in excel format (other than the temporary excel file ), we

  • Pls help me with this installation problem. Your advice is highly needed.

    I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below INFO: exit-tool: Launch browser INFO: saving exit only tools ... INFO: no detached only tools in this session INFO: exit-o

  • Can i set an allowance for myself in the itunes store?

    i want to set monthly or weekly spending limits. for obvious reasons. can i set an allowance?

  • Where are the update file downloaded on Mac iTunes?

    I'd like to know where iTunes does put the iPhone update file, because I suspect the one it downloaded for version 2.0 of OS is not good as at the "verifying the iPhone software" state of the update, iTunes reported "error -6" and the iPhone passed i

  • Time stamp a report name

    For a title of a report under regions I am trying to put a time of 2 months ago using report_name &P3_TODAY - 60. But I am having trouble using *&P3_TODAY.* which is not working. Is there a way of doing this? Thanks.