Fn. mod to get batches with quantity

Hi all,
Is there any Fn.module to get only the batches which have quantity.
I have to get the batches from MSEG .I need from MSEG because I have to link MSEG and V_BAM_MKPF to get the receipt date.It's confusing as there's a record for every movement type and I'm not sure which ones to add or subtract to get the batches which have quantity.
Appreciate your answers.
Thanks..

Hi,
Please check this FM SD_BATCH_QUANTITY.
Regards,
Ferry Lianto

Similar Messages

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

Freight condition getting multiplied with the quantity

Dear Gurus,
I have configured freight condition, ZHD0, copied from HD00. When I am putting Rs 1000 in header, if i have 10 quantities, it is getting multipled with 10 and getting the total as 10000. I want it to be 1000 only and not get multipled with the quantity. Kindly suggest what needs to be done.
Also, if there are 10 line items, the freight value should not be multipled with the quantity.
Kindly suggest
Shilpa Shah

Hi;
This could be issue of unit of measure. The sales unit of measure might be different than pricing unit of measure. So system might picking the unit conversion from material master. Like if your sales unit is CS and pricing PC. in material if it is maintained like 1 CS =10 PC. In this case system will multiply the amount.
I hope this will help.
Regards;
Avinash

There are still batch split items with quantity X for item

Our current system is ECC6. The deletion of item in the delivery (TO
confirmed) is different before ECC6 (4.6C). In 4.6, unless quantity of
batch split items are zeroed out in the delivery, the item cannot be
deleted. Message "There are still batch split items with quantity X for
item" is encountered. In ECC, line item can be deleted even batch split
items are not 0. The message doesn't exist in ECC6.
Please advise how to activate this message.

In ECC6, the logic has been completely changed during item deletion.
Now, there is no way to activate the message VL224 when deleting batch item.
In 46c,
FORM XLIPS_LOESCHEN_PRUEFEN is called with XL_ERROR = 'X'.
Main program     SAPFV50P
Source code of   FV50PFLP_XLIPS_LOESCHEN_RC
FORM XLIPS_LOESCHEN_RC
           IF IF_TABIX IS INITIAL.
             REFRESH LT_REASONS.
             PERFORM XLIPS_LOESCHEN_PRUEFEN TABLES   LT_REASONS      <<<<<<
                                            USING    LF_POSNR
                                                     CHARX        <<<<<<<
                                                     IF_ALL
                                            CHANGING LF_EXIT.
In ECC6,
The FORM is called with XL_ERROR = SPACE. That's why the error is not issued.
Actually, they are called from different place in ECC and 46c. The logic has been completely changed.
Main Program     SAPMV50A
Source code of   MV50AF0D
FORM DELETE_ITEMS_CHECK
           perform xlips_loeschen_pruefen(sapfv50p) tables   ct_reasons   <<<<<
                                                    using    ls_admin-posnr
                                                             space
                                                             space   <<<<
                                                             'GHK' "n_766525
                                                    changing lf_exit.

How to get the onhand quantity along with zero quantities in Inventory?

How to get the onhand quantity along with zero quantities in Inventory...Plz reply me as son as possible?

Hi Akshata,
In processRequest you can use pageContext.getParameter
String PartyName = pageContext.getParameter("PartyName");Regards,
Sujoy

Getting started with 8i Lite Trial

I have a copy of 8i Lite that I downloaded from the Oracle site and I have a few questions that I have not been able to answer in the documentation. I want to use this in conjunction with Codewarrior on a Palm platformave a Symbol 1740 Palm-based scanner. I am just getting started with this and want to get an understanding of how I can use this in batch and realtime environements.
- Is there any way to run 8i Lite in a 'trial mode' on a Windows 98 PC without an existing Oracle 8 server?
- Can I use iConnect with a 7.3 DB server used by Oracle Apps 10.7? I see where it is mentioned on the web where it will support this but in one of the doc files, it says iConnect only supports 8 and 8i.
- Is there a sample DB included with the 8i Lite download that I can 'play' with?
Please e-mail me at [email protected]

Hi
If I remember I think a lite database named POLITE is the default database and use iconnect to connect to it
scott
tiger
ODBC:POLITE
Try it and let me know if it works
Thanks

My shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

my shuffle ,doesnt get syncronized with itunes in my pc,getting audio and video settings error,but able to get it syncronized with my friends pc

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

The report l runs very night and gets ended with error

Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary   for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command       Prog. type Spool list Parameter      User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jmess                                            abdynpro1133
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K    SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s      ( ABAP Runtime Error             )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm   BASIS
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K    SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00                  671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00                  671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS             R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W    Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m      ( Error (Function,Module,Row)    )
Message ID.......... R6 8
Variable parts......                                       ThIRollroll bathxxhead1240
Regards,
Shiva

Hi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run   in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS             R68 Perform rollback
BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
BASIS             R64 > CPI-C function: CMINIT(SAP)
*BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS             R68 Perform rollback
BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
Time     Ty. Nr Cl. User         Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S    Operation Trace
Development class... SBTC
Sm63
Start/end time   Name of the active operation mode
   00.00 - 01.00    Normal
   01.00 - 02.00    Normal
   02.00 - 03.00    Normal
   03.00 - 04.00    Normal
   04.00 - 05.00    Normal
   05.00 - 06.00    Normal
   06.00 - 07.00    Normal
   07.00 - 08.00    Normal
   08.00 - 09.00    Normal
   09.00 - 10.00    Normal
   10.00 - 11.00    Normal
   11.00 - 12.00    Normal
   12.00 - 13.00    Normal
   13.00 - 14.00    Normal
   14.00 - 15.00    Normal
   15.00 - 16.00    Normal
   16.00 - 17.00    Normal
   17.00 - 18.00    Normal
   18.00 - 19.00    Normal
   19.00 - 20.00    Normal
   20.00 - 21.00    Normal
   21.00 - 22.00    Normal
   22.00 - 23.00    Normal
   23.00 - 00.00    Normal
Regards,

How to get sum of quantity column in table control

Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
    CHAIN.
       FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
    endchain.
    MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...

Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
     MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
     COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM

List of rejected sales order with quantity and value

Hi,
Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
Pls help
Thanks,
Vijesh

Dear Vijesh,
VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value. See the screen shot below.
I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
Thanks
Nagaraj

Cost component with quantity

Hi SAP Experts
My client want material actual cost component report not only with value amount, but also with quantity.
The material ledger was activated, I know using standard function, we can have material actual cost component report with value amount, like Tcode:MLCCSPD, but cannot find any quantity information.
Do anyone have the kind of requirement and how to achieve it ?
If only customer development method, how to do it. thanks a lot!

I tested the CKMLQS, it only get the current period BOM quantity, cannot trace to origin component quantity.
for example:
Previous Period: material A Qty 10 -----produce------> material B Qty 10
Current Period : material B Qty 7 -----produce-------> material C Qty 7
Now, Using report:CKMLQS, it only show material B quantity 7 consumed for material C, cannot see the origin component material A consumed quantity.
I need to trace origin component(the lowest level of BOM) quantity, like amount value report(Tcode:MLCCSPD).
Anyone have suggestions? thanks
Regards
Robin

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

Material cost estimate with quantity structure (tcode: CK11N)

Hey dear friends.
I donu2019t know in which forum I should put my question above.
In fact, Iu2019m new to SAP PM module.
Iu2019m trying to create material cost estimate with quantity structure (tcode: CK11N) for a material u201CXu201D.
This material is manufactured.
While running the transaction CK11N, I got an error message.
After analyzing this error message, Iu2019ve realised that somebody had assigned wrong activity types to cost centers which are linked to this material in tcode: CR03, tab: costing.
So Iu2019ve changed and assigned the right activity types.
Then, Iu2019ve tried to run the tcode CK11N again. But the system still brings the wrong activity types and seems to ignore the ones that Iu2019ve assignedu2026
It seems like the old activity types still linked to the cost centers somewhere else than in tcode CR03u2026
Any idea about what am I mising ?
Thank's in advance.
Bahia.

Dear Bahia,
If its rate routing means,i guess you must be working in REM scenario.
So goto CA22,delete the existing operation and then assign the same work center in a new
operation,check what activity types is it proposing in the rate routing,if its reflecting correctly means
save the datas.
Also goto KKF6N--->click the change mode icon and then calculator button to create a preliminary cost
estimate and then save the datas.
One of our forum friend has asked you to check the production order read PP master data once
again,but understand there is no production order concept in REM scenario,only planned orders.
Then come back with your queries.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Jun 17, 2009 12:05 PM

Material cost estimate and mateiral cost estimate with quantity structure

Hi sap guys,
What is the difference between material cost estimate and material cost estimate with quantity structure

Hi
Both are in one way the same.
Material cost estimate can be calculated as
1. Material with quantity structure
2. Material without quantity structure
You can get more insight into it at the following link
http://help.sap.com/saphelp_47x200/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
Regards,
Suraj

Java Applet HelloWorld "Getting Started With Applets" example not working

Hi there,
It's been ages since I ran my Linux CentOS boot of Linux but I am going through the official oracle java applet tutorials, just every time I try and run the "Hello World" applet in Firefox 17.0.3 and I am running the Iced Tea thing for java applets.
Every time I try and run the example from the following code:
import javax.swing.JApplet;
import javax.swing.SwingUtilities;
import javax.swing.JLabel;
public class HelloWorld extends JApplet
// called when the user enters the html page:
public void init() // keep apps within the init() function very small as per the http://docs.oracle.com/javase/tutorial/deployment/applet/appletMethods.html
    try{
      SwingUtilities.invokeAndWait(new Runnable()
        public void run()
       JLabel myLabel = new JLabel("Hello World");
       add(myLabel);
        } // end running the application
      }); //end of swing invokeand wait
    } catch (Exception error){ // end user running the app in page
       // System.err.println("GUI didn't work on initial run");
}It keeps bringing up the error "Start: Applet not initialized" I did google that basic error and from what I found I should consult the JavaConsole, I know the console was removed from the Firefox menu quite a while ago. So went to find a way of loading it using the IcedTea one but it keeps bringing up a load of errors in even trying to run that.
Is there anyway of sorting this out? I mean I have even tried installing the one on the oracle website, the plain JDK but nothing seems to work.
Is there anyone that can help me get applets working? I was even going to go as far as to reinstall my distro but I want to avoid that as much as possible.
Thanks and I look forward to any replies,
Jeremy.

in the Getting Started with Java DB tutorial they
tell u how to set ur "DERBY_HOME" (what is that?).
once i press enter after typing this command:
set DERBY_HOME=D:\Java\Java
Phonebook\javadb in my command prompt do i get
any message or does it just go to the next line?type env or set or whatever in the command line to see what your environment variables are set to
they also tell u how to set ur "JAVA_HOME" (what is
that?). The Java installation you want to use
in their example they give u this: set
JAVA_HOME=C:\Program Files\Java\j2se1.4.2_05but in my java folder i have jdk1.6.0 and jre1.6.0
but no j2se1.4.2_05, so which 1 must i choose?It's up to you. I'd go with 1.6
also once ive done this: set
DERBY_HOME=D:\Java\Java Phonebook\javadb this
set JAVA_HOME=D:\Program
Files\Java\jre1.6.0 and this set
PATH=%DERBY_HOME%\bin;%PATH% and then type
sysinfo to verify that the variables were set
correctly i get these errors: 'D:\Java\Java' is
not recognized as an internal or external command,
operable program or batch file and '""'
is not recognized as an internal or external command,
operable program or batch file any help would
really be appreciated because this is really killing
me!you need to set your path variable - so something like:
set PATH=C:\Program Files\Java\j2se1.4.2_05\bin

Fn. mod to get batches with quantity

Similar Messages

Maybe you are looking for