Focus for the input ready field in table

Hi,
i have few questions
1. i have table with tool bar button "add row" when i click that it will add a row with input ready field, but here i need scroll down for that, but what i need is it should automatically put the focus on it. please suggest how can i do that.
2. I have save button, when ever user enters improper input in the above input ready fields, i am giving error message, problem is it is clearing my table data at the same time, Please suggest where should i raise the error message.
3. i need two columns to be fixed in the table, while scrolling horizontally.
Please give your suggestions.

Hi,
Check the component for example wdr_test_table for COLUMN SCROLLING.
If you have 15 columns to be shown. Set the first 2 columns as (LEFT as fixed) and scrol count as 4.
For the first 2 columns set the property FIXED POSITION as LEFT and for table property scrollable colcount as 5.
Then you will get the scrolling adn also columns as fixed.
Regards,
Lekha.

Similar Messages

How to implement the input help at web for the input ready query?

Dear all,
As you konw when we create the input ready query for Planning, we can insert the new record for plan with Analyzer tool. We also can use input help(double clike the space) for input the master data.
I want to konw when I use Web Appliaction Designer to run the query at the web, How can I use the input help for planning data.
My customer request me must implement the input help function at web.
Thanks a lot
best regards,
Leon
Message was edited by: Leon Wang
Message was edited by: Leon Wang

Hello,
It seems Input Help is not possible with WEB.
Check out the link below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Input Help - with Web application designer</a>
Bex Analyzer - You access input help for a cell by double clicking on it or choosing the F4 button.
Web Appln Designer - Input help is not available
Hope it Helps
Chetan
@CP..

Digital signature for the input data field

Hello friends,
I want to run a HASH routine (MD5) and then an encryption algorithm (RSA 64 bytes) over a string of characters ( for the some of the input fields NOT all) to generate the output with digital seal. In essence this is the concept of digital signature.
How can i achive this using SAP XI. Can anybody guide me...
Thanks in Advance..
Regards
Venkatesh

Hey,
refer to this link.
How XML Encryption can be done using web services security in SAP NetWeaver XI
Creating certificate in XI
How to use Digital Certificates for Signing & Encrypting Messages in XI
regads,
Milan

Table name in Oracle for the User Mapping field?

Does anyone know the table name for the user Mapping field in EP6.0?
Thanks

Hi Alan,
why do you want to access the DB directly?! You can access the information via the Java API, which is in general the most secure way for the DB scheme is always "subject to change without notice"...
Best regards
Detlev

*****Can we make charcterstics as a Input ready in the input ready query.**

Hi experts,
Our business requirement as follows.
the existing business scenerio is, Master data ( say Product list ) )will comes from CRM , By using the input ready query , we will plan against to that master data by using IP.
But my requiment is " though the master data is not avilable( say new product came into the market which is not avilable in CRM) in the CRM end, user wants to enter the that product name directly in the input ready and also user wants to plan against that product.
As per our requirement , user wants to enter charcterstics directly in the query like entering the key figure values directly in the input ready query.
As per as my knowledge concern , this functionality is not avilable in IP.
so can you please suggest if any other work around solutions for this to fix this issue.
Thanks,
Subhratha benargeee.

Hi Subhrata,
As I said, its not possible in IP at all. If we talk technically, IP infrastructure needs SID's. Meaning it communicates through SID values.
Once you enter characteristic value in the query, the system automatically sends the SID values to OLAP when the round trip happens. There was a certain period of time, when system automatically used to create sid's if there does not exist that value in master data for the characteristic. I dont remember the exact support pack, But that was a bug and has been fixed. Its not possible in any form web, bsp or bex analyzer on OLAP write infrastructure. As long as you dont find some RFC which can write this value to the master data table of the characteristic before the OLAP is triggered.
I understand you are writing transaction data only, But OLAP works through SID's when it gets data from infoproviders. So due to the same reason without an entry into sid and master table of the characteristic there can not exist an entry in the infoprovider. OLAP simply can not communicate without SID's.
Now coming to the scenario I explained earlier, its Business Planning & Simulation. If you design your planning application on BPS, you can design web interfaces which is a BSP application can achieve what I said.
Its not the speciality of BSP(business server pages) which is making it possible, But the BPS interfaces are designed such a way that it communicates directly through master data and text table of charcteristics.
As of now, I do not have a solution for your scenario on IP, If I find or come across one I will surely let you know.
All the best.
Best regards,
ravi.

Prevent entry of negative number in input ready field

Hello,
In layout, in quantity input-ready fields, planner should not enter any negative number, if he tries to do so or by mistake, system should give error message.
is this possible in BI-IP planning layout for input-ready fields ??
thanks,

Hi Jasmi;
Sorry the late answer...
Regarding your first question... you can built a function module to do the same. However, in this area I don't have ABAP knowhow to help you.
There is no standard way to do it. This means definitions on the query or a formula.
second question... in SE91 you had create a class message (like my example ZBI_IP) and a message number (in my example 004). Don't forget to add the text "no negative values allowed" to the message.
I forgot to add (sorry again) the E of E004 means Error. If you want you can put W as warning. If Error the sequence of formulas stops. If Warning it continues (but it's better you double check).
Reading the code...
FOREACH ECON, FUND,PROJ.
IF { YORCINIC, ECON, C_PL,NP_AC} < 0.
MESSAGE E004(ZBI_IP).
ENDIF.
If I have a combination of ECON, FUND and PROJ for KF YORCINIC where the value is less than 0, the system presents the Error message 004 of the class message ZBI_IP.
Tell me if this is good for you;
Kind regards;
Ricardo

Adding new rows in the input-ready query

Hello everybody!
Could you please advise what setting should be done in the ready for input query to make it possible to add rows in it.
I succeeded in creating input ready queries where it is possible to modify key figure value for the existing records, but I haven't succeeded yet in creating query with input-ready rows.
Thank you in advance,
Kind regrds,
Maria Kazakova

Hi Gregor!
Thank you.
Of course before posting a question, I've read this help topic attentively.
I created Aggregation level ZPPLAN with characteristics:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
Query ZPRQUERY3 is based on aggregation level ZPPLAN
Query settings:
Rows:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
in the key figure properties, tab Planning option "Data can be changed using user entries or planning functions" is selected.
Execution of the query returns the table with input-ready cell and empty new rows doesn't present.
so could you please advise what else settings should be done for query, to make input ready rows available in the query? so as to make it possible to enter new records in the input ready query?
Following settings are done for the Analysis Grid properties:
tab "General":
- Display sort icons
- Apply formatting
- Allow navigation
- autofit
- Display hierarchi icons
Tab "Clipping":
Full size for horisontal and vertical.
Sorry for so long quetion,
I would be grateful for an answer,
Kind regrds,
Maria Kazakova

How can i make the input/output field to a multiple lines in ModulePool...

hi all...
can any one please let me know, is there any possibility thru Module Pool program where i can make the input/output field to a multiple lines...
say, when we drag & drop the input/output field on the screen - it'll come with single line display. so, how to make the same field to multiple lines field.
rather i can say my question like, how to increase the height of the input/output field.
Desired Functionality:
The user wants to display a long text.
now the input/output field should not display the record as a single line, now the field has to display the text in multiple lines (something like wrap option in ms excel).
hope u got my question...
please help me in this regards...

hi Rengith, i'm not using Text Field, i'm using Inpu/Output Field to display the long text.
If u mean text field as input/output field then can u let me know the process for this, how to do the same thru module pool program...
Edited by: murashali on Mar 18, 2008 1:36 PM

How can I do this input help in the Input ready query

Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
Leon

Hello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil

Text variables for non-input ready variables

I have a query with a structure in the Rows section. The row structure contains three selections for different time periods. Two of the time periods are based on non-input ready variables for Calendar Month. The user will enter a calendar month and the other two selections will be based on the month that was inputted. Since the time periods are dynamic, I need the text in the rows to reflect the appropriate Cal. Month value. I have tried using a customer exit to define text variables but they are not working. My text variables are called "CMON_TXT_D01" and "CMON_TXT_D02". If the user selects 'Dec. 2010', the report would look like this
Dec. 2010 => user inputs this value
&CMON_TXT_D01& => customer exit calculates -1 month back from inputted value
&CMON_TXT_D01& => customer exit calculates -2 month back from inputted value
I need it to look like this if the inputted value was 'Dec. 2010'
Dec. 2010
Nov. 2010
Oct. 2010
I can get the text variable based on the input-ready variable to work but the two selections that are based on the non-input ready variables are not working. Does anyone know how to get the text variables to work for the non-inpjut ready variables?
Thanks.

Hi,
I would do it this way;
1) Create a Row Structure
2) Create Row Selection for Dec 2010 by restricting Cal. Mth. by the User Input Var
3) Create Row Selection for Nov 2010 by restricting Cal. Mth. by the User Input Var with a Var Offset of -1
4) Create Row Selection for Oct 2010 by restricting Cal. Mth. by the User Input Var with a Var Offset of -2
5) Create a Text Var whose processing is by Replacement Path & choose Variable with the User Input Var under Replacement Path options
6) Edit the Description of each of the 3 Row Selections to contain the Text Var in (5)
7) The Text Var should automatically reflect the User Input selection & the offsets defined on the same in the Row Selection Captions
--Priya

Exception: non-read-only mapping defined for the primary key field

Hello.
I'm new to Oracle and I created Java EE Web Project.
And I created entities from tableA, tableB, tableC from my database.
tableA has foreign key to tableB and has unidirectional Many-to-One relationship. tableC has two primary keys and one of these is foreign key to primary key in tableA. tableC also has unidirection Many-to-One relationship to tableA.
Then I created session bean and data control from it, in design window, created read-only table from tableA.
And I selected columns in tableA and also in tableB.
I ran the application and saw the following exception in log window.
Local Exception Stack:
Exception [EclipseLink-46] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.DescriptorException
Exception Description: There should be one non-read-only mapping defined for the primary key field [tableC.tableA_ID].
Descriptor: RelationalDescriptor(mypack.tableC --> [DatabaseTable(tableC)])
tableA_ID is a primary key in tableA.
How can I solve this error?
Please help me.
Edited by: 900471 on 2011. 12. 3 오전 5:32
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:34

There are not enough details to be sure since you have not provided the mappings. From just the error, it looks like you are using the tableC.tableA_ID field as the foreign key in the ManyToOne relationship to A, but have marked it as insertable=false, writeable=false, meaning that it cannot be updated or used for inserts.
Either make it writable (set the settings to true), or add another basic mapping/attribute in the entity for TableC that maps to the field which you can use to set when you insert a new tableC entity. A simple example is available at
http://wiki.eclipse.org/EclipseLink/Examples/JPA/2.0/DerivedIdentifiers
Best Regards,
Chris

Input ready field

I have a query with three key figures, one is not input ready(amount) and the other two are input ready fields(budget1 and budget2).
I am able to enter the budgets in input ready fields and save the data, but the amount field is not showing the data from the cube.
Any help is appreciated!
Edited by: RamyaAshok on Sep 11, 2009 2:52 AM

Hi
Please cf note : 1337901
Regards, Hyma

Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

Hi,
Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
Below are the 2 records the data from the table
select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
122:17056     122     17056     802     801
15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A
122:17056     122     17056     802     801
Thanks in advance,
-vijay

It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
Case -1 : When you delete the existing model and re-import again.
case 2:
When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
-Murali
Edited by: 907569 on Jan 8, 2013 10:55 AM

Unable to get the SharePoint 2013 List names using Client object model for the input URL

Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)

Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

Focus for the input ready field in table

Similar Messages

Maybe you are looking for