Folder with Question Mark on Start-up/ DOS-like screen with errors now...

Left my Mac Pro running last night, woke up to it being frozen (looked like it was
in hibernation mode and wouldn't wake up).
Forced a shut down from button on tower - on start-up, went gray screen
with blinking folder with question mark.
Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
I picked English, went to choose start-up disc. Options were the install
disc and a network drive with a question mark. I picked drive with
question mark.
Computer looked like it was trying to restart, apple with loading circle
spinning, and then blinked to a black screen that looked like DOS that was
blinking error messages (one message was "diskOs2 undefined Oxe0030005")
Any suggestions?
Mac Pro   Mac OS X (10.4.9)  

Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
You could try to do an SMC Reset and see.
I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that.

Similar Messages

  • Hard disc dead??? flickering folder with question mark on start up

    I get a flickering folder with question mark on start up, and i cant get into mac osx.
    I tried the hardware test and it detected no problems. Ive tried to do an install with the disc but no harddisc was detected to install it on.
    I cant believe my harddisc is broken all my work is gone (backing doesnt help with configurations etc)

    I know many of you don't understand english. Basicly what the articel tells us is that there is a problem with the harddrive due to a contruction caused error.
    I would say please do something about it. Start a program to solve this problem
    Thank you very much (my seagate still works, lets see for how long!!!
    Der Festplatten- und Datenrettungsspezialist Retrodata aus der englischen Grafschaft Hampshire gibt eine beunruhigende Warnung an MacBook-Besitzer heraus. Apple-Notebooks, in denen ab Werk Seagate-Festplatten arbeiten, sind nach seinen Untersuchungen mit einem Fabrikationsfehler konfrontiert, der zum Totalausfall der Festplatte mit einhergehendem Datenverlust führen kann.
    Nach eigenen Angaben erhält der Spezialist eine Vielzahl dieser ausgefallenen Platten zur Wiederherstellung von Daten. Die Untersuchungen von Retrodata zeigen, dass der Schreib-Lesekopf der Festplatte mechanisch ausfällt. Dies führt dem Spezialisten nach zu tiefen Kratzern auf der Oberfläche der magnetischen Scheiben mit entsprechenden Datenverlusten.
    Anwender können schnell selbst feststellen, ob ihr MacBook gefährdet ist. Die betroffenen Segate-Platten sind ausgestattet mit der Firmware in Version 7.01. Zeigt der System-Profiler, zugänglich über den Befehl “Über diesen Mac… / Weitere Informationen” im Apfel-Menü, in der Kategorie Serial-ATA ein Laufwerk mit der Hersteller-Kennung ST und der Versionsnummer 7.01, dann besteht nach diesem Bericht ein hohes Ausfall-Risiko. Die Firma rät allen betroffenen Anwendern ein Backup der Daten anzulegen und umgehend ihren Händler zu kontaktieren.

  • Folder with question mark at start up

    Why a, I ratting a blinking folder with a question mark at start up.  My MacBook will not open beyond that.  Is it a ram issue?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Flashing folder with question mark on start up + many other issues

    About 6 months ago I first encountered the flashing folder with question mark on startup. I fixed the issue myself by unplugging the mouse and keyboard and rebooting. I also did the cmd S fsck -fy before that and all was well.
    The other day I had the flashing folder again...I got it going a couple of times but it happened again. Right now I seem to be in deep trouble. Please read the following:
    1. I booted up from the leopard dvd and no hard drive was there to run a disk utility on
    2. Booted up again from the dvd and hard drive was there. Ran the disk utility and everything was fine...for about 5 minutes. Then the computer froze and I had to hard power down. Rebooted to the flashing folder.
    3. Did command s and fsck but at the end I get the message failed to issue comm reset after 3 attempts.....failing....
    4. I powered down, vacuumed out the vents, sprayed compressed air to make sure it wasn't over heating from dust buildup as I read somewhere.
    5. Booted up...worked for about 5 minutes again.
    6. Now I can't get to the hard drive from the install dvd at all...I tried 100 times. Cmd s won't work at all!! So it looks like I am out of options. Does anyone have ny radical solutions that i can try to fix this. There are some very important things on my hard drive that I would be very upset about loosing.
    Please reply

    Sorry to bear bad news, but most likely the drive is already dead or dying. I hope you backed up everything when the first symptoms appeared.
    There are data recovery services, but might be very expensive.
    EDIT: Some (a few) people have had success putting the drive (sealed very well in a plastic baggy) in the freezer overnight and then quickly putting it in an external enclosure and getting the data off it that way.
    Message was edited by: WZZZ

  • Folder with Question Mark, to Apple Icon, to Kernel Screen at Startup.

    At startup Folder with Question Mark, Followed all steps to resolve it to no avail, I try to re-install Snow Leopard and Apple Icon with Grey screen appears, then Kernel screen.
    I cannot get past the Kernel screen.  No options to click anything, like system preferences or anything. I have a Macbook, with Snow Leopard.  Any help would be much appreciated.
    I tried Pram Reset and everything.

    Hey, thanks for the quick reply Mende.
    I tried that, it goes to the apple icon, however after about 10 seconds of the apple it goes straight to the Kernel screen.  It doesn't give me the options of opening anything. Infact it doesn't even have a mouse curser.
    If I hold "option" it gives me the option of choosing only the "Leopard DVD" but that's it and then it goes to the Kernel Screen
    Again, thanks for the taking the time to help me out.

  • Folder with question mark on start up

    Hi all
    I began downloading updates on a macbook laptop and then cancelled (10.4.1). I then started doing a couple of other things (viewing pdf and safari). When I went to quit these programs the coloured circular processing wheel came on screen for extended period of time. Therefore out of inpatience I turned the lap top off by holding down the power button. Upon restart I got the folder with the question mark. I have read and tried all the available options,
    - Start up from system software CD - Disk utility - Repair - Did not work
    - Safe start - couldnt get it to work
    - Reset PRAM - didnt change anything
    I am considering reinstallation but am worried about losing everything on HD. Do you have any suggestions. Any help would be appreciated.

    It's certainly worth a shot, but I don't think it will work--and you'll want to backup your data just in case.
    How much space is on that other computer? Do you have a FireWire cable?
    If you have a FireWire cable, connect one end to the working Mac and the other to your MacBook. Boot your MacBook while holding down the T key. Your MacBook should load with the FireWire icon on the display--it looks like a Y. On the working machine, your MacBook should appear as an external hard drive called "Macintosh HD" with the FireWire symbol. Best option after this would be to create a folder on the working computer--called "MacBook" perhaps--and move any files you want to save over there. Not sure if there's a way to preserve settings (ie iTunes library information) by copying the folders, but I can try to find out. Copy data from your Users folder.
    The Applications folder may not copy the contents over if you just drag and drop--and if any of those applications were installed with a CD/DVD or other installer, rather than just dragging and dropping, you'll need to reinstall later.
    ~Lyssa

  • I upgraded to mavericks yesterday and now i have the folder with question mark on start up

    I've tried booting up pressing the option key and i get to the startup utility section but it won't let me erase, re-install or anything

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Help ! Flashing folder icon with question mark when starting up

    Hi, I have tried to restore my macbook pro 15 (2012 model with Yosemite OS  X) to factory settings and wipe out the hard drive but on restarting it I now just get a blank screen with a flashing folder icon with a question mark on it. Any help/advice anyone I would be very grateful for ! Thanks,  Mark

    Something didn't install properly.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Blue folder icon with question mark at start-up

    Hi all!
    I've read the previous threads and posts and didn't really find any other user who has this problem.. I'm new here and yes I'm freaking out.
    I can't even check my mac specs. so at this point I'm not sure if it's a MAC OS X (10.5.7) I just selected that. I bought it three years ago and it's white and not the pro one, if that helps.
    It froze while browsing firefox, so I shut it down. When I restarted it again, there's no apple logo or spinning wheel like others experienced, it just showed a light blue screen with a folder icon with a question mark on the center.
    I've restarted it about 5 times and still the same! I appreciate any help!
    thanks

    Installing a free app called Smartreporter [http://www.versiontracker.com/dyn/moreinfo/macosx/23232] will monitor your hard drive and warn you when it's failing.
    You do not have to buy a drive from Apple, there are many good, less expensive ones on the market, [macsales.com] is a great source.
    Good luck and you're welcome,

  • Folder with Question mark on it on a gray screen.  Will not restart!? :(

    While browsing online the other night, my Macbook completely froze up on me. I couldn't move my mouse and the screen froze.  I decided to restart it but then the Macbook started making a whirring/ clack clack noise and I got a gray screen with a flashing question mark folder.  I've tried restarting it up again since then, and I get nothing.  The noise continues and I get nothing but the blinking folder with the question mark on it.  The Macbook is roughly 5.5 years old  Any suggestions?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Flashing File Icon with Question Mark Upon Start-Up

    Today when I went to use my computer (which was already on) it went blank and then came up with a gray screen with a flashing file icon with a question mark in the middle of it. I have already troubleshot things with several forums online and nothing has worked. I have tried to restart in Safe mode, single user mode, verbose mode, and tried to get on using my option key which got me to an internet login screen finally. I tried to log in and eventually got to an apply.com/support screen with -1007f underneath. I am not 100% which operating system I am on. I know that it is Mac OS X and pretty recent. Please respond if you can help!

    Reset the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM
    To boot from DVD:
    Press C during startup
    Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media).

  • PowerMac G5  Flashing box with question mark on start up. No start up disc.

    Hi, I was intending to sell my Power Mac G5. I have just turned it on and have been greeted with a grey screen and flashing box with a question mark in it. I had wanted to clean the disk before selling. I do not have the start up discs. It's currently operating on 10.5.8. I have borrowed macbook 10.4.9 though with little knowledge of computers i don't know if this will help the matter. I have tried pressing alt on booting up and thisled to 2 options 1 a cruved arrow and 2 arrow pointing right. Could anyone help  please?

    It's not seeing the Hard Drive, it may be bad.
    See if this works at all...
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).

  • Flashing "Finder Folder" and Question Mark on start up...

    I've been following the discussions on the question mark issue and yes, I have gone to the Apple sight and read all of the solutions and tried them. The machine is a G3 iBook 700mhz. I have reset PRAM, tried all the startup button pushing and even control C with the... That's the problem: it won't accept any discs including the original 9.2 restore disc and even a retail Panther set I bought. It just spits them out when the unit gongs. My trusty iMac G3 400mhz did this a few months ago but at least I got to the Disc Utility icon, although I couldn't get passed it. I was able to use the target mode , however, and empty the hard drive. I haven't tried doing this on the iBook, becaause I don't care about the crap that's on there. I mainly use the iBook for wireless surfing and I have pulled the Airport Card, additional Ram and even disconnected the keyboard. Is the hadrive simply dead? Thanking all you Mac people in advance,
    Sev

    I take it that you mean you have tried ALL the steps in the following Apple Knowledge Base article?
    http://docs.info.apple.com/article.html?artnum=58042
    There is another way to repair the hard drive (if it works). Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
    If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do some hard drive maintenance to help things out.
    Good luck.

  • Flashing folder and question mark on start-up... again.

    I took my iMac in about two weeks ago because it froze, I did a hard restart, and when it booted back up it showed the flashing folder with a question mark. The guy who worked on it said my hard drive got messed up, and put in a new one. I just got around to turning on my computer, and it's doing the exact same thing, even though it has a whole new hard drive. The only difference is, now when I insert install disc 1 to run disc utility, the hard drive actually shows up in the program, when it never did before.
    Am I being a complete dunce and not doing something right?

    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button.
    After the formatting is completed the new volume will appear in the DU left side window. Quit DU and return to the installer. Now proceed with the OS X installation.

  • Blinking folder with question mark at start up

    When i turned on my iMac I was surprised to see a folder icon blinking as it was running fine before this. I didn't delete or install anything.
    My DVD drive does not read properly so i am unable to boot from the installation disk, tried to boot using BootCD from Charles Soft that didnt work either. Even tried resetting PRAM/NVRAM, unplugged keyboard and LAN cable as well but still no luck.
    Read many articles online regarding this issue and it seems that my hard disk must have crashed. I don't have backup of any files.
    Can anyone please help me resolve this issue? I desperately need my data back
    Please help.

    Whew, yes, at the very least it's having trouble with the Data on the Drive.
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Do you have another Mac with Firewire & a FW cable?

Maybe you are looking for