Followup to a previous question on strange color corruption

Previously I posted the following question regarding massive corruption when I would upload into Aperture.
http://discussions.apple.com/thread.jspa?threadID=2276464&tstart=0
Well last weekend It got really bad where around 25% of images were corrupt. I have solved the problem. I was running 14 gig of Patriot memory. I found it I would run 16 gig I would get constant kernel panics.
So I removed 6 gig and now run a total of 8. Voila. no more corruption.
So my question is. Where can I get Mac certified memory for my G5? It seems Apple no longer sells it on their site.
Thanks

See the quote below from iOS: Understanding Restrictions (parental controls) - Apple Support
Click on the link in the quote for instructions:
Important: If you lose or forget your Restrictions passcode, you'll need to perform a factory restore to remove it.

Similar Messages

This is a followup to my previous question.

This is a followup to my previous question.
The following code works:
MyRec.List[1].AdminObject:=createoleobject('NovellGroupwareAdmi n');
MyRec.List[1].AdminObject.ConnectByDN('SOMEDOMAIN.GROUPWISEOU.S OMEORG','SOME
-TREE' );
MyRec.List[2].AdminObject:=createoleobject('NovellGroupwareAdmi n');
MyRec.List[2].AdminObject.ConnectByDN('SOMEOTHERDOMAIN.GROUPWIS EOU.SOMEOU.SO
MEORG','SOME-TREE');
MyRec.List[1].Domains:=MyRec.List[1].AdminObject.Domains;
MyRec.List[2].Domains:=MyRec.List[2].AdminObject.Domains;
Having said that I'm getting iffy results when I try to do operations on one
domain then the other and back ... The Groupwise Admin Object api doesn't
seem to want to be connected to multiple groupwise systems, even with
multiple instantiations of 'NovellGroupwareAdmin'
Question 1:
1) Is there a way I can tell one instantiation ("You've got the football")
and have it work reliably, then do the same for the other when I need to
operate on it?
2) Is there a natural limit or restriction to this library that I'm
colliding with?
3) Has anyone had any success operating on multiple groupwise systems at the
same time?
Any help appreciated.

That should work in theory... however the problem I'm running into is that the job will report a "fail" everytime no matter what because it loses connection with the remote host while it's updating the network drivers. However, on the server, all network
drivers are in fact updated. The only results I get from the receive-job is a timeout, but if I redirect the actual results from the command to a text file on the server, then just wait 15 seconds for the drivers to complete their install I can read what actually
happened. I'm not sure why the job is timing out. It waits for a good 30-45 seconds before timing out when the host is only blipping for about 10 seconds, but it never tries to establish a connection back.
Reading through, if our servers were updated with powershell 4.0 I could use the InDisconnectedSession
parameter I think... Hmmmm I'm gonna look into upgrading our powershell versions anyways.

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Satellite A300-202 - External display turned a strange color

Hi,
I have a Satellite A300-202 with a ATI Mobility Radeon HD 3650, and after upgrade from vista to windows 7, my external display turned a strange color, seemed to lose the red color. Never show the white color, in which should show the white color shows the color blue.
I have uninstalled and installed again the graphic card drivers and update the new drivers but dont solved this trouble. My external monitor it's ok because I have tried with other laptop and don't have this trouble. I have also tried my laptop with other monitor and have the same trouble.
Anybody ever had this problem, someone who can help me?
Thanks,

Hi Xardas,
Yes I have problems only with the external monitor.
I tried both. Now I have the new beta version to the windows 7 64bits, downloaded from the amd/ati site, but I have tried also with the version available in the toshiba drivers page to my A300-202, and had the same problem.
Yes I have installed the new version of the BIOS too.
Thanks,
Message was edited by: Zagga

I have done what it said in a previous question and exported my IE RSS feeds, but I can't understand how to import them into FireFox ot how to view them once they are imported.

In a previous question, someone asked hoe to import RSS feeds from IE to FireFox:
http://support.mozilla.com/en-US/forum/1/358684?s=rss&as=q
I have done as it says, but had trouble with the second step which was "installing OPML Support 1.5.2 extension for Firefox, which you can use to import OPML file you just exported from IE". I think I installed the extension, but now what? how does it help me import the feeds? And where do i view RSS feeds in FireFox?

PORT YOUR NUMBER OUT...T MOBILE WILL PAY YOUR ETF IF YOU GIVE THEM YOUR VERIZON PHONES.

A way to find my previous questions and problem reports?

Is there a way on this forum to find my previous questions and problem reports? Since posting a question earlier today, I've found MOST of the answer and would therefore like to append what I found to the question, without waiting for someone else to answer it. I don't remember the title I gave the earlier question, or I'd use that title in searching for it.
The troubleshooting information below is more relevant to a previous problem than this question.

'''My Contributions''' link on a main forum page should display a listing of all your postings.
[https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=milesrf&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 See this forum search for your Username under "Asked by"]

How to see my previous question?

Hi, how can I see back my previous question?

This one?
https://discussions.apple.com/message/22024283#22024283
You can tap your user name above and see all your previocus posts

Question about background colors

Greetings folks,
I have a question about background colors using a DW template in CS4.The page in question is here: http://www.webrevamps.com/dw/assignment11.html
On the left nav, I want the background color to extend throughout the entire sidebar. Not just where the text is. What am I doing wrong?
And actually the same question applies to the main content area.
Secondly, behind the graphic where the header is.... in DW it shows as a black background covering the entire header area, but that is not the way it looks when posted online. What am I doing wrong?
Thanks!

On the left nav, I want the background color to extend throughout the entire sidebar. Not just where the text is. What am I doing wrong?
Nothing. THis question is asked and answered several times a day. Google "faux columns" to see a slick way to make it look like you have fixed this.
Secondly, behind the graphic where the header is.... in DW it shows as a black background covering the entire header area, but that is not the way it looks when posted online. What am I doing wrong?
No idea. It looks exactly the same to me in CS5, nor do I see any reason why it wouldn't look the same in CS4.

I need to remove my previous question? How I do it?

I need to remove my previous question? How I do it?also how I edit my previous discussion?

You can't remove your previous question & if 15 minutes have past since posting, you can no longer edit your post.

OK. Firefox support asked me to login and respond to those who offered solutions to my previous question. Now, where do I find the forums?

I can find no link to your forums in order to respond to the solution to my previous question. What am I missing?

The place you posted this thread in is the forums. https://support.mozilla.org/questions/
You can either click on your username in order to then see a search link for the two questions you made or while on https://support.mozilla.org/questions/ click on Sort and Filter -> [https://support.mozilla.org/en-US/questions?filter=my-contributions My Contributions] link.

Strange colors and stripes after importong Photo

Hello,
I've got a problem in Adobe Lightroom and Adobe Camera Raw (Photoshop CC).
There are strange colors and stripes in some of my photos after importing. The strange colors and stripes are not in the original photo; I can not see them in my camera and Lightroom does not show them in the grid where I can select which photo's I want to import.
Sometimes the strange colors appear in the library, but sometimes they only appear when I'm already in the developping module.
Sometimes when I re-import the photo the strange colors and stripes are gone, but sometimes they're not.
The problem is also seen in Camera Raw (Photoshop CC) with the same pictures. I'm not sure what causes this problem.
When I export this photo, the strange colors and stripes are also in the exported JPEG file.
See picture:
The problem appears with photo's taken with my Canon EOS 550d, but it happens so rarely that I don't think my sensor gives these problems. Even more the fact that I cannot see the problem at the LCD-screen of my camera and the fact that te problem sometimes disappears when I re-import the photo to my computer. The problem appears with photo's taken with different lenses and on differen SD-cards. So i can not say what causes the problem.
Does anyone know what might cause this problem?
And can anyone tell me how to prevent or solve the problem?
Thanks in advance!

I didn't say "not the camera, not the lenses, and not the computer"
I did say it could be the hard drive; I did say it could be the memory (those are parts of the computer), and if the camera is not writing the photos properly to the camera card, it could be the camera (which is rare, but you can't rule that out at this time).
But yes, its not the lenses

Very strange color phenomenon - Please help!

Hello,
I just got a new iMac and moved all my software and files via firewire account transfer from my Mac Book to the new Mac. Everything works well, as expected, but when I open my Domain.sites2 File (I have iWeb08) on the iMac, a strange color phenomenon occurs: Identical colors specified for page background and placed shapes on the background look differently in iWeb, but when published, they look the same.
When I open the identical file on my Mac Book, the colors look the same (and publish the same of course). I've tried deleting the color shapes and creating them new, changing background color back and forth, but still: a color applied to the background of a page and a shape ontop of that page looks dramatically different. A purple looks intensive in the background, that same purple applied to a shape looks a lot mor pastell-ish and light, almost as if the color was converted to cmyk when applied to the shape, and left in vibrant RGB in the background.
Now this means that on the iMac in iWeb I cannot edit my site any more. I don't see what I do. If I make the colors for page background and shapes look identical in iWeb (or even specify identical color values), and publish, they look differently in the browser (I checked in multiple browsers).
I checked everthing for hidden transparency or cmyc conversion options that might be accidentally selected but can't find anything. I changed my monitor color settings, but that doesn't seem to be it, either.
What is happening to the color and why do colors on shapes look different than color in the background? Help. What am I doing wrong?
Thanks
Petra

Could be that monitor gamma, when calibrating the monitor, is different on old and new system.
Not that it should matter, but both browsers and iWEB handles colors in strange ways and sometimes use the Monitor color profile instead of for instance the sRGB color profile.
See also thread about text color http://discussions.apple.com/thread.jspa?threadID=1221776&tstart=0&messageID=576 9551#5769551
Tomas
Message was edited by: Tomas Jonsson

Sorry the answer to my previous question did not help....when trying to get app message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

Sorry the answer to my previous question did not help....when trying to get new app installed on iPad message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

Whatever the reasons are that you think the problem exists, you will not be able to resolve it on your own. Did you see this at the bottom of the support article that I suggested that you read?
Additional Information
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance.
You should probably contact iTunes Support.

Followup to a previous question on strange color corruption

Similar Messages

Maybe you are looking for