For Peggy Since You Seem to Know Everything

Peggy, I can now say, after several solid weeks of using iWork 08 at work that I really like it a lot, so I wanted to let you know after my initial reactions had been negative and I probably drove you crazy. There are a few shortcomings, but I trying to work around them and most of them are really minor.
I wonder if you know anything about this one issue, though. I do very large documents and I have lots of tables throughout them that do calculations. I have to frequently update or change numbers so I create the tables in the report itself rather than in number and dragging onto to the document. Since I have to change numbers frequently that would be a nightmare and create lots of room for human error. Hence, doing them in the report. Historically, I did it this way in Word with embedded excel tables in the report itself (there were no external spreadsheets).
In most tables it works absolutely flawlessly. However, I several tables that are full page with lots of individual calculations where I enter numbers in various fields and they change throughout the table. On those that are nearly a full page it grinds my data entry in those tables to a halt. If I enter a number in a cell it slows to a halt taking 4 or 5 second to enter a few numbers. As a consequence it takes forever just to enter or change numbers or headings, etc. just in those one or two tables- but they're the most important ones to the report. Is there any way to speed this up or do you have any other ideas short of having to do externally in numbers and then dragging into the report. The calculations are not complex- mainly adding, subtracting, multiplying, computing percentage changes, etc. What seems to cause it to grind to nearly a halt is one change of one number changes many of the other numbers, leading to multiple calculations occurring.
None of this affects the speed in doing things elsewhere in the document or in the small tables, which are just fine.
Any ideas, fixes, etc.? I could just put these one or two tables in numbers and drag in but I want to see if this can be avoided for the reasons noted.

Hello
You may use Numbers itself as a Desktop Publishing tool.
I assumes that it will not be faster.
From my point of view, the problem is in fact a design flaw.
Pages, Keynote, Numbers make a good job saving in XML format but it was an error to build them using the XML for every tasks.
This make calculations very long.
I'm quite sure that sometime, they will be forced to admit that and introduce a more efficient scheme:
decipher the XML descriptionof the document.
Work upon an internal efficient format (as they did in AppleWorks for instance)
encode in XML format to save the document.
As I already wrote sometimes, when we have floating sheets on an AppleWorks Draw document, the calculations are quickly made. I'm sure that changing the scheme, Numbers, Pages, Keynote would be able to work the same.
Yvan KOENIG (from FRANCE lundi 17 décembre 2007 11:57:47)

Similar Messages

Since you seem to respect the concept of privacy, why did you drive your president out?

Do you not understand the question? I believe in freedom of speech and the right to spend your own money in any legal way that you choose. Where do you get off condemning anyone for either of the above?

Hello, you might have read some things about this topic that aren't correct, because sadly the press has in general done a very poor job at fact-checking this story. Since you care deeply enough to send this message instead of silently turning your back on us, you might be interested in some attempts to clear up a lot of this misinformation:
Here is a short collection of facts about what happened:
https://blog.mozilla.org/blog/2014/04/05/faq-on-ceo-resignation/
and here's a longer version written by an employee in a blog post: https://medium.com/p/7645a4bf8a2
Brendan didn't have to leave Mozilla - we would like nothing better than to rehire Brendan. In fact, we didn't want him to leave in the first place. However it was his personal decision to resign among all this ongoing frenzy, threats and mischaracterization of him as a person and the Mozilla community coming from third-parties, in order for the constant bombardment to end and to avert any further damage to Mozilla and its mission that he helped build for so many years.
So in this sad process we have lost a co-founder and brilliant technical mind and now the "other side" of the political spectrum comes along, again quite misinformed and rushing to judgement. This is quite sad & Mozilla has not deserved to be in the middle of all of this. Our community exists to protect the Web by promoting openness, innovation and opportunity and is no battleground to fight culture-wars upon...
Thank you!

Kcsync asking for a password you don't know? Here's a solution

If you get a persistent request for a password when syncing your keychains here's the fix.
open Terminal
copy this string at the prompt and hit enter:
/System/Library/Frameworks/SecurityFoundation.framework/Versions/A/kcSync.app/Co ntents/MacOS/kcsync -reset
Make sure it is exactly as it appears here.
you will then get a response somewhat like:
dotmacfx[6621:903] removing /Library/Keychains/.syncinfo/login.keychain.syncinfo.plist was successful.
Quit Terminal
kcsync should then stop asking for a password every time you sync your keychains

Yes, it's the password for your Apple iD.
If you can't remember the password, open iTunes on your computer.
From the iTunes menu bar click Store > Sign In > Forgot?

Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

Hello, My iph5s screen cracked according an accident I just had it since February with threeG mobile network , I have been told I can replace my phone or get it fixed by apple for free, can you please let me know what should I do about this matter ?

Oh well that's what I heard because it's about the 90 days warranty ,,. Anyway can you please tell me what I can do to get it fixed ? It's a not really big crack in the right bottom side of the screen

(solved) T61 swap cpu? (everything you need to know about swapping a T61 or T61p CPU)

Edit: I've summerized everything I've learned in a week long search and added it to this topic, so scroll down and read. You'll save yourself many hours of reading and research.
I asked this as part of a prior topic but never got a definite answer, so I'll ask this specific question.
Can I swap a cpu from one t61 to another?
Donor system: T61 15.4widescreen with T9300 cpu (2.5ghz, 6mb cache)
New System: T61 15.4 widescreen with T8100 cpu (2.1ghz, 3mb cache)
I'd like to know for sure before I begin. Best answer I got so far is "I think so".
ps. I also have a 14" (non-widescreen) t61 with a T7300 cpu (2.0ghz 4mb cache). I'm thinking the larger cache makes this superior to the T8100 even though it's slightly slower, do you agree? and if not, should I put the leftover T8100 in it? will it fit? more trouble then it's worth? (secondary question, but non-urgent)
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)
Solved!
Go to Solution.

I'm going to add some additional info to this post to help anyone who reads it.
The T61 / T61p was manufactured with one of two different types of CPUs
Merom (older)
Penryn (newer)
If your system board came with a Merom and you install a Penryn, you'll get a false "thermal error" on boot. There is a 3rd party bios to block that error from posting, but it's unauthorized by Lenovo and should be considered experimental.
If your system board came with a Penryn, you can install either of the two CPUs.
If your not sure of which CPU you have, load your bios and it will show you it's intel number. Mine is T9300 (which is a 2.5GB Penryn CPU with 6MB of cache). Go to Intel's website and search that number and towards the top of the page it will say something like "formerly Penryn" (I believe "formerly" is used because they are out of production).
Example: http://ark.intel.com/products/33917/Intel-Core2-Duo-Processor-T9300-(6M-Cache-2_50-GHz-800-MHz-FSB)
Since Penryn is newer, your Merom boards won't be able to run the faster CPUs, so you can either try to find the fastest Merom CPU, or if you want to be daring you can reflash your bios with an unoffical firmware and run the Penryn. Although this has been done successfully with thinkpad enthousiats world-wide, it still won't give you full Penryn support.
The fastest Merom processor I know of is that a T61 will run is the T7800 It runs at 2.6ghz and has 4MB cache (note that this is slightly faster ten my 2.5gz Penryn, but my 6MB of cache more then makes up for the slight difference in speed.
The fastest Penryn processor I know of is that the T61 will run is the T9500 It runs at 2.6ghz and has 6MB cache (some day I'll get one of these when the price in the used parts market drops low enough.
There are faster processors, but I believe the T61 will not support one with a front size buss rate above 800mhz. *note, if anyone knows if this is possible please contact me and I'll edit this information.
This should fully explain all the technical details I've discovered during my investigation, but to make this topic more complete, I'll hare a photographic guide showing how to remove and replace your CPU and cooling fan, and also addresses replacing your thermal paste (proper use of thermal paste is a MUST, to much and you could end up with a T61 paperweight, to little and you got the same problem. Basically when the heatsink is tightened down onto your CPU and GPU, it should spread to cover all the chip, with as little as possible overspread. I recommend Artic Silver #5, which is made of 99.9% silver filings. They also make a less expensive version that uses alumimum instead of silver, but given that T61 is known for thermal problems, you don't want to get cheap paste to save yourself all of $5.
Buying a new fan should be considered too. You can buy the fan alone for $12 includinng shipping from many ebay sellers. The heatsink and fan can also be purchased as a unit, but your heat sink should last the life of the Laptop. There is also a conductive "pad" that transfers heat from your systemboard chipset. This can be reused, just make sure it is intact and don't allow it to get any dust or finger prints on it. I'd also recommend a can of compressed air to blow out the inside of the laptop. Do this before you remove your cpu, you don't want to be blowing crap into the socket.
Also be very careful not to bend any pins on the CPU, and inspect the new CPU carefully, a slightly bent pin could miss being detected and if you insert the cpu carelessly, you'll crush it.
Online guide to replace CPU
PDF guide (better guide in my opinion)
If anyone has a suggestion for improving this guide, send me a P.M.
If you found this information useful, click me some "kudos" so I'll know the time spent in sharing the info I learned is appriciated.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

Everything you need to know about Foxtel Go

Foxtel on T-Box customers can self register Foxtel Go on 2 devices per Foxtel on T-Box subscription. You are able to view content on 1 of the 2 registered devices. The T-Box device will automatically be registered on your behalf and cannot be deregistered. You can change the device they have registered once per calendar month.
To change a registered device you must log into the Foxtel Go app. As a Foxtel from Telstra customer please use your Foxtel My account details. As a Foxtel on T-Box customer please log in with your primary (i.e. the first username created and linked to your account) BigPond username and password.
Once in the app go to the settings icon and choose 'manage my devices'. Within this section of the app you will be able to select de-register for the device you wish to change. To register, download the Foxtel Go app and log in. You will be prompted to register the device.
Remember you can only change one device once per calendar month. If you are still able to make a change, you will be advised of the number of device registrations left this month.
If you recently registered your T-Box, you should have access to Foxtel Go within 1 hour. If you are experiencing errors please try closing the Foxtel Go App and logging in again. If you are still unable to access any content please contact us via Telstra 24x7 or Telstra Technical Support on 13 22 00
If you swap your Foxtel on T-Box service to a new device, your Foxtel Go service is not affected as it is associated to your BigPond username and password, and not the T-Box device.
When trying to make a second device change within a month the de-register' button will be greyed out, preventing the change.
Current channel rights only allow Foxtel Go to be registered on 3 devices per Foxtel Account. For Foxtel on T-Box customers, the T-Box counts as your 3rd device.
The parental control function is specific to Foxtel Go and managed in the app via the settings icon. To access parental control:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
All R-rated content is automatically blocked, but you can personalise your restrictions for other ratings. To do this go to Settings in the Foxtel Go app, turn on Parental Controls and restrict the classifications you would like to block. If this is the first time you do this you'll be prompted to set a 4 digit PIN specifically for Foxtel Go. You can use this PIN to change your parental controls in the future. This PIN is only applicable to the Foxtel Go app. For Foxtel from Telstra customers, the PIN is not the same as you use on your IQ or Set Top Box, and you will be required to setup a new PIN to restrict content on Foxtel Go. For Foxtel on T-Box customers, the PIN is not the same as you use on your T-Box, and you will be required to setup a new PIN to restrict content on Foxtel Go.
Foxtel Go content is unmetered with Telstra BigPond Home Broadband services. With other internet service providers this will be offset against your data plan.
If you use Foxtel Go on your device with any 3G/4G telecommunications service provider, including Telstra, usage isn't unmetered and you will incur data charges when using Foxtel Go. The below list provides an indicationof the data you will use per device on the various app settings, based on watching an hour of TV. To view your settings go to the 'settings' icon in the Foxtel Go App, turn on 'video settings' and choose your preferred quality:
3G Phone/Tablet Best: 320 MB per hour / Low: 170 MB per hour
Wi-Fi Phone Best: 420 MB per hour / Low: 320 MB per hour
Wi-Fi Tablet Best: 720 MB per hour / Low: 320 MB per hour
Wi-Fi PC/Mac Best: 1310 MB per hour / Low: 470 MB per hour
The size of each episode or Movie on Catch up TV can be found on the Synopsis tab.
You can use Foxtel Go at a Wi-Fi location or a personal hotspot when you are in Australia provided you have an internet connection. Some locations offer Wi-Fi hotspots where you can log onto the internet for free. e.g. McDonalds, Starbucks, etc. Any data charges incurred are charged to the business and not to you. When connected to Wi-Fi, you'll see a Wi-Fi symbol on your device.
Foxtel from Telstra customers with a Foxtel iQ or iQHD set top box can Remote Record and send a channel change to their set top box. Unfortunately this functionality is not available to Foxtel on T-Box customers.
You can pause and rewind the last 30 minutes of Live TV, even if you've just changed to that channel. Due to device restrictions users of Samsung Android devices are unable to use this feature.
Foxtel Go is a streaming video service. Streaming means that images and sound are delivered live to your device to view when you press Play, rather than being downloaded to your device to view at a later time.
Games you'd normally see on Foxtel from Telstra or Foxtel on T-Box on FOX SPORTS 3 are broadcast on Foxtel Go on the Footy Play Plus channel
There are no Catch Up of AFL games or magazine shows on Foxtel Go due to content restrictions.
The key symbol indicates that a channel isn't part of your package. You need to upgrade your Foxtel from Telstra or Foxtel on T-Box package to watch it. Your package can not be updated through the Foxtel Go app. For Foxtel on T-Box customers you can update your packages in the T-Box App, at www.telstra.com/tboxsetup, via 13 2200 or in store. For Foxtel from Telstra customers you can update your packages through the store or via 13 1999. The lock symbol indicates that, as part of your parental control setting, you've locked this classification of content, and can't watch it. If you want to change the settings then the primary (i.e. the first username created and linked to your account) account holder can change these by:
Go to the settings' icon in the app (top right)
Access parental controls'
Choose which classifications you'd like to restrict
No other username or password can change the parental control settings.
We may be required to block out specific programming from time to time, e.g. if a channel doesn't have the legal right to broadcast the programme over the internet. However, all live channels are the same as channels you watch through Foxtel from Telstra or Foxtel on T-Box.
The vast majority of the Foxtel on T-Box content is available via Foxtel Go. There are some minor exceptions. MTV Music and MTV Dance channels are not available. FOOTY PLAY and FOOTY PLAY+ (overflow) channels are not available on PC and Mac only.
Access to Foxtel Go is included in your Foxtel on T-Box and Foxtel from Telstra subscription. However, you will incur data charges when accessing the service on a 3G/4G network.

Re: Everything you need to know about Foxtel Go
Iam book in to have foxtel install on 2nd of March was offered Thursday the 28 my appointment has been cancelled so can be home Thursday I put a complaint in as was told it was 1hour for change over from T Box but no one has got back to me

Everything you wanted to know about books... and then some.

Hi, all:
With all the questions and speculation about how books are printed, what color profile to use, etc. I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
Thank you for contacting the Apple Print Products Customer Service.
I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
For more information regarding iPhoto 2, please visit the following article:
iPhoto: Color, Black and White Prints Appear Garbled or Distorted
For more information regarding iPhoto 5, please visit the following article:
http://docs.info.apple.com/article.html?artnum=165501
Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
BOOKS
All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
Hardcovers Books
The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
Softcover Books
The softcover books come in three sizes:
- Large 8.5 x 11 inches
- Medium 6 x 8 inches
- Small 2.6 x 3.5 inches
All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
CARDS
All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
CALENDARS
All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
KODAK NEXPRESS 2500 Digital Production Color Press
I hope you find this information helpful in answering questions on the iPhoto forum. If you have any other questions, please reply to this email and we will help you further.
Hope this will answer some of your questions more clearly.
Do you Twango?
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, QT 7.1.3, Mac OS X (10.4.8) 22 LCD, 250G/200G/160G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod

Thanks, Toad. That was very informative. I don't really know anything about McCoy 100# Text Gloss paper stock, but I seem to have a small problem with it (or maybe the gloss/varnish on top, if there is any). I imagine I'm not the only one. My hardcover photo books have always come out beautiful. At home in Southern California, I can leave them on the coffee table without a problem usually. However, if I travel to humid areas of the East Coast with a book, or if it rains for several days here, the book paper will start to develop a wavy, wide corrugation around the edges that is very obvious when the book is viewed in profile. This does not seem to completely go away when the humidity goes back down. Other, "store bought" books around the house don't seem to do this. Have you seem or heard of this before? Thanks.
--Scott

For some reason the Apple ID window in iTunes and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Everything you need to know about FCP X 10.1 . . .

. . . . . well almost everything. http://fcpx.tv

Re: Everything you need to know about Foxtel Go
Iam book in to have foxtel install on 2nd of March was offered Thursday the 28 my appointment has been cancelled so can be home Thursday I put a complaint in as was told it was 1hour for change over from T Box but no one has got back to me

For those of you that know me

for those of you that know me, i figured i'd drop a note here to say today's my last day at oracle. those of you that do know me probably also know that i'm very grateful to you guys what you've done. for what we've done. back in the day when this project marvel stuff (oracle platform stuff, for you really old skoolers) was new, it took a certain amount of faith to jump on board. we did. we jumped on board believing it'd work, and then we proved it. we've shown the world that this Application Express stuff not only works, but it works well. thanks guys, it's your continuing activity here on this forum and in the global community that have shown so many people how good web app development can be. please know i appreciate that from the bottom of my heart. also, now that i'm leaving the mothership, i'd like to say that the apex team is just incredible. you couldn't hope to work with a cooler or more dynamic group of people. i think you guys get a sense of that when you use the product and interact w/them on this forum, but i just wanted to confirm that now that i'm heading into the afterlife.
somewhat choked up,
raj (soon to be [email protected])

Hello,
I don't know Raj in person, but I read some of his articles on OTN, some of his threads on this forum, and some very kind words, written by Tom Kyte. So, I believe the Apex guys when they are saying he'll be missed.
Usually, when senior staff jumps ship, it's a good reason to start worry. In this case, it seems like Scott Spendolini is building a mini empire around Apex. As I consider these guys to be smart and skillful, their willingness to leave good and secure positions at Oracle, in favor of some new adventure, can only mean one thing they all believe in the good and bright future of Apex, and its ability to provide for them. It seems like a good sign for people like me user who devote a great deal of time learning how to make the best out of this tool.
I wish Raj all the best, and encourage all the others keep on the good work.
Regards,
Arie.

HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How do you transfer the content from an iPhone to a PC? I have to use a PC for a while and don't know how to put my stuff on to there from my phone

How do you transfer the content from an iPhone to a PC? I have to use a PC for a while and don't know how to put my stuff on to there from my phone

If you're talking about music and movies an i-device was not designed for unique storage of media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing music and movies is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred from a device to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

Buffer overrun....what do you do when NO ONE seems to know the answer?

Hi.
I have a problem with Quicktime (7.3). When I try to run the program I have the following error message:
+"Microsoft Visual C++ 2005 Runtime Library+
Program C:\....\quicktimeplayer.exe
A buffer overrun has been detected which has corrpted the program's internal state. The program cannot safely continue execution and must now be terminated"
It happened suddenly without installing anything. I've tryed uninstalling and installing again but the error still shows up.
No one seems to know anything about this problem including the almighty apple. What do I do now?

Heh.... Double indemnity....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Walt F. Schaefer" <[email protected]> wrote in
message
news:fopvgt$a4q$[email protected]..
> Murray,
>
> FYI, those 2 links go to the same page. =8-0
>
> --
>
> Walt
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:fopuiq$92q$[email protected]..
>> Use a method similar to the one that lightbox uses.
>>
>> Place a positioned div over the entire grid, and
make the div invisible
>> with the style "display:none". Then you can have
each thumbnail do the
>> following -
>>
>> 1. Use the ChangeProperty behavior in DW to change
the display of that
>> overlay from display:none, to display:block
>> 2. Use the Set Text behavior on each thumb to
dynamically write the link
>> to the image into that div (see here -
>>
>>
http://dreamweaverresources.com/tutorials/settextoflayer.htm
>>
>> and a tutorial
>>
>>
http://www.dreamweaverresources.com/tutorials/settextoflayer.htm
>>
>> )
>>
>> It should work fine.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "dxexaxnx" <[email protected]>
wrote in message
>> news:fopu4k$8hi$[email protected]..
>>>I have a grid of images. I want to rollover one
of the squares of the
>>>grid to a
>>> larger image that will cover the entire grid
completely. Is this
>>> possible? No
>>> one I know seems to know how to do this. Please
help!
>>>
>>
>
>

For Peggy Since You Seem to Know Everything

Similar Messages

Maybe you are looking for