For the last week while using iTunes(Windows 7) i have not been able to get the names of songs from CDDB when importing CDs. Very frustrating! Can anyone help me out?
CDDB in itunes is not bringing up the name of songs on CDs when importing into itunes. This has been going on for a couple of weeks. Any help?
I have, a couple different pairs, unfortunately, and still no change. TBH, the headphones don't bug me nearly as bad as the fact that I can't plug my iPod into a radio or speaker with an audio cable and hear my latest purchases. Drives me crazy that I can't listen to my tunes!
Similar Messages
-
I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fineI am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.
-
I have recently restored my phone to unlock it. I have installed the latest version of IOS. Since then, I have not been able to play the music I have purchased. The scrolls or flips through the songs and I am unable to listen to them. Can anyone help?
iTunes is quite friendly, and very powerful.... You probably just need to set up automatic syncing in iTunes.
If the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select the iPod there.
To the right, the iPod's Summary screen is shown. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music. This setting enables automatic syncing for music. If your iTunes music library is small enough to fit on the iPod's storage, you can choose to sync Entire music library. Otherwise, you can choose to sync Select playlists, artists, albums, and genres. From the lists below, select (checkmark) what you want to sync to the iPod.
Here's one convenient way to set this up. In your iTunes library, create one or more playlists. Add the ALL the songs you want on the iPod to those playlists. OR, you can use existing playlists. Back on the iPod's Music screen, select those playlists under Playlists. (You can select other items on those lists, if desired.)
When you click Apply, the songs in your selection sync to the iPod. Going forward, to update your iPod (add/remove songs), just update those playlists in your iTunes library. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates the iPod with the same changes.
NOTE: On the bar of buttons that starts with Summary, click on the other buttons (such as Movies, Podcasts, Audiobooks, etc.) to set up syncing for those iTunes media categories. -
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
I have been using Itunes on my HP laptop for 12 months and over the past month have not been able to access the Itunes store or any of the Itunes Help type menu's. When in Itunes I click on the Store icon and the top middle box gets to Half way. Pls help
I had the same tried loads of fixes
saw this on the community from whatheck
In windows 7 click on your start menu, go to the accessories, right click on the command icon and choose "run as administrator"
Once it opens type the following command...
netsh winsock reset
Hit enter and it should say something like winsock reset successful now reboot your computer
IT WORKED....... cleared all the "action2 on the CPU and loads IStore perfectly -
Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access
Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can -
I have not been able to get onto itunes to check my account or purchase anything for about a year now. Got an Alienware system with latest Windows. When I pull up itunes I can access my old music but cannot access my account to purchase anything new. Just reinstalled itunes and it still does not work. I am ready to just quit. Anyone else having this issue? Solutions?
Thanks!If this is an Alienware system, the most likely culprit is the Bigfoot Networks LSP as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
Head to the Downloads and Drivers page at Dell for your particular model of Alienware. Look for available updates for your BigFoot networking device. If you update those drivers, does that give you back your Store access? -
Has anyone not been able to get the iTunes installer to load properly and get a message like this: This iTunes installer is intended for 32 bit versions of windows. Please download and install 64 bit iTunes installer instead. I have tried repeatedly to get this to load, I have uninstalled iTunes completely and reinstalled and still get the same message. I have windows XP and a brand new ipod touch which I am trying to load.
Yes, it's come up a number of times. If you look to the right under "more like this", you'll find threads that may offer useful suggestions.
Regards. -
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?
Jason The Hague wrote:
Thanks! But seriously why have Apple disabled the info sync on iTunes? By 'Upgrading' to Mavericks I've inadvertantly disabled my Apple mobile devices from fulfilling their function. Come on Apple work with us here!!
Apple told developers they were removing that service over two years ago. The developers that depended upon it should have done something about it.
Why did they remove it? My guess is because it was pretty crappy, was difficult to maintain, and wasn't a good solution for multiple devices that could get the info without tethering to a "base" Mac. -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab. All of the support I have read talks about the movie being in the "movies" tab. I cannot use the "move" function or the "transfer" function because they are not available. Is this an issue because I just updated to the newest software?
In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
When I open iTunes, this window pops up. "A required component is not installed. Please reinstall iTunes. (-42076)" I have not been able to sync my iPhone after restoring it. Can anyone help?
Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.
-
Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her account. I have not been able to do this. Thanks
iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.
Maybe you are looking for
-
KM only one folder and subject of document
Hi portal gurus, I am very new to Knowledge Management. I have given an assignment of KM, where in the portal server installed on windows os. I have given a folder location to store the documents related to organisation. I have created a KM navigatio
-
Hello, We currently have a 4404 controller that is approaching 100 AP's (their max). The boss would like to add redundancy into the project. Which leaves me with a lot of questions and I am fairly new to cisco WLAN controllers. While a second 4404
-
I can't find/install podcasting app for N85?
Hey all... I wanted to try out the Nokia Podcasting app on my N85. However, it doesn't appear in the list of apps on the N85's "Download!" section; it doesn't appear on mobile.nokia.come's app list when I go there on the N85 (only "World Clock" does
-
Lightroom 4.3 histogram does not appear
I am a longtime Lightroom user, now with 4.3. I import my files from my D800e with a card reader as dng's. Occasionally, when I click on an image in the grid view, the histogram does not show, regardless of how long I wait. If I bring it into loupe v
-
Hi, we defined the org model.Now we need to down load the data(users, employess etc) from flat file and assign them to org model.what are the bapi/function modules.what is the way. thanks krishna