Foreign currency valuation exchange rate

Dear Forum,
In the listing after execute of F.05, there are 2 exchange rate column. The first exchange rate is the exch rate type for translation which enter in FASB 52 tab in F.05.
The second exchange rate is the rate captured during posting of the accounting document.
For vendor and customer, always can show the second exchange rate but for bank / bank clearing / some gl balance account / some open item account, they do not have exxhange rate during posting of accounting doc.
May I know what would be the impact of the valuation?
Thanks

Hi,
Bank and Bank clearing accounts are different.
Bank account(with out open item management)-So Balance valuation process(KDB)
Bank clearing account(Open item managed)-So open item valuation(KDF).
In a balance valuation system shows only valuation dated exchange rate.
e.g. 01.03.2010 - 100 USD @ 45 =>4500
05.03.2010 - 200 USD @ 46=> 9200
300 USD 13700
If you are going to valuate on 31st march and exchange rate is @ 47
then calculation is 300 @ 47 => 14100-13700=> 400 difference system wil post to the predefined GL accounts.
Bye

Similar Messages

Please help - Foreign currency valuation

Hi,
I have a query about foreign currency valuation
As per my knowledge, when we run F.05 for foreign currency valuation, it valuates the open items in foriegn currencyand reverses them the next day.
so the original invoice will not have any valuation difference
( more data > valuation diff) will be zero.
NOW, if the invoice has valuation diff what does it mean?
Please help me on this....
Regards,
Jay

Below information may be useful to you-
You have the following options for valuating open items in foreign currency:
Saving the exchange rate difference per document
You can define that in addition to being posted, the exchange rate differences are saved per document. This information is then available for subsequent evaluations, for example, Transferring and Sorting Receivables and Payables
To do this, select the indicator Valuation for FS preparations on the Postings tab.
The exchange rate differences saved in the document are taken into account for payment clearing:
Unrealized exchange rate differences
When you valuate open items in foreign currency, the exchange rate difference determined is posted as an unrealized exchange rate difference.
Realized exchange rate differences
For an incoming payment, that is, when you are clearing the open items, the current exchange rate is determined. The unrealized exchange rate difference determined from the line item is taken into account.
If the first valuation results in an exchange rate difference of 30 DEM, and the current valuation results in an exchange rate difference of 10 DEM, an exchange rate difference of 20 DEM is posted and 10 DEM is saved in the line item as the final valuation difference.
Reversing exchange rate difference postings
You can define that the exchange rate differences posted are automatically reversed one day after the valuation run by an inverse posting.
You therefore have the option of determining exchange rate differences at any point in time without this valuation being taken into account for the creation of financial statements or for payment clearing.
To do this, select the indicator Reverse postings on the Postings tab.

Error while running foreign currency valuation program FAGL_FC_VAL

Hi
this is regarding foreign currency valuation in ECC6.0 with EHP4
i have done the revevent setting in spro and while execturing TC FAGL_FC_VAL agetting following error:-
Incorrect account determination: 1000 10 200010
Message no. FR257
in customization, i have assigned P&L and balance sheet account against above GL (OBA1 -> KDF).
any idea where i am wrong. Please reply.
regards
DD

Hello Devi,
This account managing with open item? Can you check G/L account master data?
If yes,
You should check your customizing OBA1 -> KDF. I think you filled currency and currency type on OBA1-KDF. If you don't have different P&L ve balance sheet adjustment account for each currency and currency type, you can pass initial for this field. ıf you use different balance sheet adj. account or P&L account for each item, you must assign write criteria.
For example your company code currency is USD and you have a customer reconcilation account which has EUR currency, you should assign EUR currency for this account on OBA1-KDF. Please check in FS00 for this account, exchange rate difference key must be empty if this account managing with open item.
Regards,
Burak

Foreign currency valuation differences for reconciliation accounts

Hi gurus,
we have run the transaction FAGL_FC_VAL - Foreign Currency Valuation (New), now i try to make a report summirazing valuatin differences of the open line items by customer, vendor and gl account. however i cannot found the tables which the valuation differences are recorded. ( i dont find the values in the table bsbw in any FI document)
the customizing is (tcode oba1)
Exchange Rate Dif.: Open Items/GL Acct:
for customers:
G/L account: 1201xxx
Bal.sheet adj.1: 1209xxx
loss: 65xxxxx
gain: 64xxxxx
can you help me?
thx.

Is there any way to keep track of FC valuation differences by customer basis?
i dont see how much FC differences occured for a spesific customer!

Foreign Currency Valuation Values Conversion

Hello SAP Experts!
We are migrating from 4.6B to 4.7 and we are working in the vendor, customer and G/L accounts open items conversion.
In the present system (4.6B) the users use transaction F.05 for foreign
currency valuation with the flag "Bal. sheet preparation valuatn" activated. This means, that the valuation difference is not reversed
but it is stores in the field BSEG-BDIFF of the affected open item.
Now we are trying to convert those foreign currency open items with a
batch input to transaction FB01. However, the fields BSEG-BDIFF do not appear in the dynpros and we could not find a way to make them optional to enter the value of previous revaluations.
We have thought of transaction F-05, but there is no way there to reference the revaluation that is being posted to the affected open item. T
If we do not enter this amount in that field we will have problems
after the go live to pay those items, as the "Bal. sheet adj. 1"
account balance will never be zero and the gain/loss accounts for exchange rate difference will be duplicated.
Do anyone know how can this be done?
Hope you can help me on this one.
Many thanks in advance.
Regards!
Noelia

Hi Dominic!!
Thanks a lot for your answer. Yes, they are separate systems
Let me see if I understand your suggestion:
1) I should do a manual posting through F-05 in our 4.6B system bringing the balance adjustment account and the exchange rate difference account to zero.
2) Transfer the balances to 4.7.
3) In the first closing period run the automatic foreign currency valuation
(through F-05) with the flag "Bal. sheet preparation valuatn" deactivated so that the system revaluates the open items from the time the open item is created to that moment.
is it like that?
Many thanks for your help again!
Best regards,
Noelia

Foreign currency valuation (new) for vendors and costumers open items

Dear friends,
Is there any option that when i run the foreign currency valuation program (fagl_fc_val) for vendors and costumers open line items not to generate the reverse posting? I have read in the sap library that the reverse posting is optional and the when you pay the invoice the system works the difference out between the valuation and the exchange rate of the payment, but i can not find it in customizing.
thanks in advance
marc

I also like to add that it is best to post reversal because normally the revaluation entry is posted on the last date of the month and the reversal entry is posted on the first day of the following month, which means that the following month will have a new entry on the last date independent of the entry made in the prior month.
The idea of posting the valuation entry is to value the customer and vendor open items which were posted (let us say 3 months ago in a foreign currency) with the latest exchange rate as of the end of the month. This way these payables and receivables stand corrected.
Is there any reason why you don't want to post the reversal entry?

Intercompany payment posting after Foreign currency valuation - F.05

Hi Gurus,
I have an issue with intercompany payment posting after foreign currency valuation run.
Build Up:
Let me give you a brief description first. Company u2018Au2019 has open items from Company u2018Bu2019. Basically Company u2018Au2019 charges management fees from Company u2018Bu2019. Both companies have a local currency of u2018EURu2019 and a group currency of u2018USDu2019. The open items posted in company u2018Au2019 have been accumulating for two years now. In January of this year finance decided to run the foreign currency valuation (F.05). The method they used was the reversal method. So at the beginning of the next month the entries from the valuation were reversed. They repeated this in February as well. Note this is the first time the foreign currency valuation was performed in SAP, before it was done manually. After February they never ran the foreign currency valuation run.
Issue:
Now what is happening is, when open items that have been accumulating for over two years and are before the foreign currency valuation run are cleared (payment is made) there is a exchange rate loss/gain. When the open item is cleared there is posting to the G/L account for Balance sheet adjustment and also an exchange rate loss/gain G/L account.
Posting:
Debit u2013 Cash
Credit u2013 Customer (intercompany)
Credit u2013 Balance sheet adjustment account (unrealized loss)
Debit u2013 Profit and loss account (realized loss)
The balance sheet adjustment account that is posted to is from OBA1 u2013 KDF u2013 balance sheet adjustment account in the foreign currency valuation accounts. Currency translation account determination is empty in OBA1.
I understand the system while payment posting is clearing/offset the unrealized loss/gain and posting the realized loss/gain. But how is this possible, when the foreign currency valuation run was done the entries were reversed so there was no unrealized loss/gain posted.
Also another caveat: Isnu2019t foreign currency valuation for open items that are posted in foreign currency and need to be revaluated to local currency. Well that is what is puzzling the open items posted in company u2018Au2019 are posted in local currency u2018EURu2019 so the foreign currency valuation should not affect these open items, correct? And if this is true then when the open items is cleared the unrealized loss/gain should never be cleared since there is none posted the exchange rate difference should only be posted to the realized account in the profit and loss correct? Please help? I can explain further if needed?
Thank you.
Comments and facts:
Companies fiscal year is June u2013 May.
Company u2018Au2019 and u2018Bu2019 have a local currency of u2018EURu2019, group currency is u2018USDu2019
The invoices in Company u2018Au2019 were posted in u2018EURu2019
The foreign currency valuation was only ever run in January and February of 2010.

HI ,
I believe becuase you did not enter any date that's why they did n't reverse automtcially . You need to enter to reverse.
now you can use f.80 mass reversal for all of them
Many Thanks

Why foreign currency valuation is required ?

Hi.
I just want to clear my doubt. If we deal with foreign vendors or customers like vendor invoice is done through USD or EUR or GBP but payment is not made till now or customer invoices are done but payment is not received from them in month of August. In that case if we run foreign currency valuation of open vendor invoices and open customer invoices on 31st August it will generate accounting entry and next day i.e, 1st September accounting entry will be reversed. So my question is we have not received from customer and we have not paid to vendor, invoices are still open from customer and vendor side. So if we run foreign currency valuation what will be its actual effect in the business and if we not run foreign currency valuation what are the problems may arrises because later if we pay to vendor through foreign currency then actual loss / gain effect will arrise in our business scenario.
Kindly give me reply.

hi
As part of the period end process, and in anticipation of creating a period-end financial statement, all accounts held in foreign currency and all foreign currency open items must be re-valued at the period end rate. There are two tools within the SAP ERP Packaged Solution for this purpose:
Foreign Currency Revaluation u2013 Balance Sheet Accounts: The program selects every balance sheet account, typically cash accounts, that is held in a foreign currency and re-values the total balance at the currently valid rate. Any (sterling) exchange rate difference is posted to a realised gains/losses account.
Foreign Currency Revaluation u2013 Open Item Accounts: Open item accounts managed in GBP, such as debtors and creditors, may contain foreign currency transactions. The program will individually revalue each open item to determine an overall unrealised foreign exchange gain or loss position. The realised exchange rate gain/loss is posted when the transaction is cleared.
It is a statutory requirement to meet hte FAS52 and GAAP requirements
thanks
Srilaskhmi

Foreign currency valuation process.

Hi Gurus,
I need some help on foreign currency valuation. Can any one explain the in detail the process of month end open item valuation. I need to valuate an open item account which is in JPY and the company code currency is HKD and group currency is USD. I have to perform both remeasurement(transaction currency to functional) and translation( functional to Group). I need step by step guidance.
Thanks in advance,
Prashanth.

hi,
for valuating foregin currency valuaqtion, you need to prepare
1. automatic postings for foregin currecny valauation(FCV) by to code. oba1- double click on exchange rate key and assign the relevant chart of accounts and G/L accounts.
2. after that you have to create valuation methods in OB59
assume you have posted invoices with foregin currency,
enter the present currency rates in exchange rates, then run the FCV in f.05, after executing select the posting button, it will process the posting.
thing is you should decide whether it is year end or monthend.
let me know further clarifications,
regards,

Foreign Currency valuation- balance sheet preparation valuation

Hi,
I have a doubt in foreign currency valuation.
When we tick Balance sheet preparation valuation ( in t-code F.05), no reverse postings are generating, eventhough i tick reverse postings. why is this happening?.
What is happening when we use Balance sheet preparation valuation in Foreign currency valuation?
Thanks,
Vinay

Vinay,
Yes as explained earlier it converts balance sheet from one( Local) currency to Another (foreign) currency on a particular date.
For example if your balance sheet currency is EUR and your foreign currency is USD. It will convert EUR into USD on that particular date on all open items and post it to
the expense and revenue accounts for exchange rate differences from valuations. For payable and receivables accounts you must also define the financial statements adjustment accounts.
This is what it happens check your own thread
http://scn.sap.com/message/14258690#14258690
Best regards
Hrushikesh

History of foreign currency valuation F.05

Hi experts
We are using 4.7.
Someone run f.05 with strange conditions then make documents.
So I would like to know report when he run it,
And we reversed his documnets with FB08 but when we clear A/P, A/P, SAP makes Foreign suppliers reevaluation account (B/S). We just want to have foreign exchange losses/profit accounts.
Can you help me?

Hi,
First define the Currency rates under the head of general settings - currency - enter exchange rates (ob08).
Create Foriegn Exch loss or gain GL a/c under current liability, with open item management.
And in OBA1 for Sundry Debtors you assign the Foriegn Exch loss or gain a/c under both tab (realised loss and gain, and even in valuation loss and gain). You do same for Sundry creditos also..
Regards,
Shiva

Foreign Currency Valuation Run Re - look

Hi experts,
I am working on ECC 6.0.
I have runned FCV and its successful showing the differences in exchange rates.
How to take a re - look to that balances again .since i have closed the window. i want to analyse the values
any code or path..?
Thanks in advance
Jerry

Hi ,
Using to Tcode FB03 you can find the FC valuation documents.
Foreign currency valuation document type Z1
you can select the document type and posting date so that you can find your FC valuation.
Thanks
Saravanan

Balance sheet adjustment account for Foreign Currency Valuation

Hi all,
I know that we enter AP /AR balance sheet adjustment account for Open items account when we configure for Foreign currency valuation with Tcode OBA1 and KDF. I wanted to know what account can I enter in that field for other balance sheet account which are not open item managed?
Also, Do we valuate GR/IR accounts in foreign currency valuation?? If yes, what balance sheet adjustment account do we enter for those accounts?
Thank you.

HI,
The valuation of <b>foreign currency balances</b> requires a special key that is assigned the gain and loss accounts for posting any exchange rate differences that occur during valuation. You can freely define this key. You then enter it in the master records of the accounts that you want to valuate. To post the differences that are determined from a group of G/L accounts to the same gain or loss accounts, enter the same key for all these G/L accounts.
Create the Create here with Tcode OBA1 and KDB-Exch. Rate Diff. using Exch. Rate Key
And assign this in the GL account master in the Control Tab.
Thanks
Vijay

Create items by vendor and customer on Foreign Currency Valuation

When we execute Foreign Currency Valuation, we would like to create items in a document by vendor and customer.
Can we handle it a 'Corp.group-vendors' flag(Evaluate Accounts According to Group Definition) ?
Can you help with this issue please?
Thanks,
Sato.Ishikawa

HI,
With the report SAPF100, you will be able to valuate foreign currencies
from customer and vendor accounts.
It is not possible to post a foreign currency valuation directly to a
vendor or customer account. This is only possible for g/l accounts.
You can refer to the following workarounds:
From the technical point of view you can use FB01 to post such a posting
You have to enter a exchange rate manually in the first screen. In this
case this exchange rate is used instead of the exhange rate of table
TCURR (transaction OB08).
You have to choose a exchange rate which transfer the amount in local
currency to 0,00 in foreign currency.Another possibility is to use
RFBIBL00 in transfer type direct input for FB01.An amount of 0 in
foreign currency should work.
The system is designed not to post documents with 0 amount in foreign
currency to vendors/customers.
Reg
Madhu M

Foreign currency valuation configuration

HI, experts
can youone send me the detail configuration of foreign currency valuation , my id is - goutam.jena at genus.in
thnxs
goutam

Hi,
Initially you have to define the valuation mwethod in "OB59"
then you will have to assign gl accounts in "OBA1"
now you post vendor invoice with different date and exchange rate(eg. USD 42) and take different date with exchange rate (USD 40) for Vendor payment.
Now you can see the difference in exchange rate which is to be valuated.
Please let me know if you have any concerns,
Hope understood and assign points if you get through.
Thanks,
Vasu..

Foreign currency valuation exchange rate

Similar Messages

Maybe you are looking for