Create items by vendor and customer on Foreign Currency Valuation

When we execute Foreign Currency Valuation, we would like to create items in a document by vendor and customer.
Can we handle it a 'Corp.group-vendors' flag(Evaluate Accounts According to Group Definition) ?
Can you help with this issue please?
Thanks,
Sato.Ishikawa

HI,
With the report SAPF100, you will be able to valuate foreign currencies
from customer and vendor accounts.
It is not possible to post a foreign currency valuation directly to a
vendor or customer account. This is only possible for g/l accounts.
You can refer to the following workarounds:
From the technical point of view you can use FB01 to post such a posting
You have to enter a exchange rate manually in the first screen. In this
case this exchange rate is used instead of the exhange rate of table
TCURR (transaction OB08).
You have to choose a exchange rate which transfer the amount in local
currency to 0,00 in foreign currency.Another possibility is to use
RFBIBL00 in transfer type direct input for FB01.An amount of 0 in
foreign currency should work.
The system is designed not to post documents with 0 amount in foreign
currency to vendors/customers.
Reg
Madhu M

Similar Messages

Open item of vendor and customer balances entries

Hi,
i want yo upload all the open items of the vendors and customers what will be the accounting entries generated while uploading the balances of the open items?
regards,
ranjeet.
Moderator: Please, note that on new violation of the rules of this forum, your user will be banned

hi ranjeet,
first of all use t code fb60 and fb70 for vendor and customers respectively, if you are using the tool LSMW, then
in case of vendor open invoices
Vendor offsetting account Dr. .......
             vendor accountn cr.
for down payments
vendor account Dr..
         Vendor offsetting account Cr
In case of customers open invoices
customer offsetting account Cr...
           Customer Account       Dr.
for customer downpayment
    Customer account Cr.
             customer offsetting account Dr.

How to create Sales order and Invoice in Foreign Currency

Dear All,
What are the procedures I have to do to create the sale order and Invoice in Foreign currency.
Is it enough if I maintain the currency in the Customer Master and Excahge rate OBBS.
or
We have to do someting in the Sales order (Change the currency document header level)?
Kindly explain.
Regards,
Mullairaja

Dear Mullairaja
Under customer master you can maintain currency eg. usd, eur etc. that will do.. (hope you have maintain diift. Dist. Channel for Export sales and maintain Recon A/c for export revenue.) This will copy to Sales order.
Under t.code OB08 we maintain the Currency Exchange Rates which will help for copying control.
Under Displaying Billing document - Accounting - you can click on Display Currency Tab, here you will understand the rate conversion i.e from USD to INR.
Thanks & Regards
Hrishikesh K

Balance sheet adjustment account for Foreign Currency Valuation

Hi all,
I know that we enter AP /AR balance sheet adjustment account for Open items account when we configure for Foreign currency valuation with Tcode OBA1 and KDF. I wanted to know what account can I enter in that field for other balance sheet account which are not open item managed?
Also, Do we valuate GR/IR accounts in foreign currency valuation?? If yes, what balance sheet adjustment account do we enter for those accounts?
Thank you.

HI,
The valuation of <b>foreign currency balances</b> requires a special key that is assigned the gain and loss accounts for posting any exchange rate differences that occur during valuation. You can freely define this key. You then enter it in the master records of the accounts that you want to valuate. To post the differences that are determined from a group of G/L accounts to the same gain or loss accounts, enter the same key for all these G/L accounts.
Create the Create here with Tcode OBA1 and KDB-Exch. Rate Diff. using Exch. Rate Key
And assign this in the GL account master in the Control Tab.
Thanks
Vijay

Foreign currency valuation (new) for vendors and costumers open items

Dear friends,
Is there any option that when i run the foreign currency valuation program (fagl_fc_val) for vendors and costumers open line items not to generate the reverse posting? I have read in the sap library that the reverse posting is optional and the when you pay the invoice the system works the difference out between the valuation and the exchange rate of the payment, but i can not find it in customizing.
thanks in advance
marc

I also like to add that it is best to post reversal because normally the revaluation entry is posted on the last date of the month and the reversal entry is posted on the first day of the following month, which means that the following month will have a new entry on the last date independent of the entry made in the prior month.
The idea of posting the valuation entry is to value the customer and vendor open items which were posted (let us say 3 months ago in a foreign currency) with the latest exchange rate as of the end of the month. This way these payables and receivables stand corrected.
Is there any reason why you don't want to post the reversal entry?

Profit Center population in the Vendor and Customer Line items

hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
Vijay

Dear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi.

How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

X Ltd. will be Vendor & Customer.
Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

Profit centerwise Vendor and Customer line items view

Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
Bhadresh

Hi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil

Profit centre needs to be updated in Vendor and Customer line item reports

We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k

FI Open Vendor and Customer Line item

Dear Experts,
Do we have to migrate the Tax code in the Vendor and Customer Line Items during data migration?
I read somewhere that is it not necessary to do so.
Please advise.
Thank you.

Hi ,
     It depends on the legal enviroment and sometimes on the settings used in your system. It is a matter of whether the Tax code information is needed in any circumstance that could arise subsequent to migration.
Examples where you must migrate the tax codes:-
     i) Deferred VAT is used.
     ii) Prepayments with Gross Display.
    iii) Prompt payment discounts are VAT relevant.
Kind regards

LSMW upload for Vendor and Customer Open items

Hi Experts,
1. I wanted to use to use LSMW to upload through FB60 for Vendor Invoices through recording, but the problem is Amount in Document Currency is 'USD' and Amount in Local Currency is 'INR'. While recording it is not allowing to input values in Amount in Local Currency while my upload file has values in both Amount in document currency as well as Amount in Local currency. Any help with this regards?
2. Do i need to open the all fiscal years which are there in upload file?
3. Any better option to upload the Balances with LSMW?
Any useful information will be Highly appreciated.
Thanks in Advance

Hi Rajkumar,
To upload Open items of Vendor and Customers, in LSMW, you will have two files header and line items with a link linking both the files.
Now, Suppose if you have to enter an amount in USD, then in the header file, enter USD in the currency field and give Exchange rate also in the header file and give the exact exchange rate which should be the value of your Amount in Local Currency INR.
In such cases, you do not enter directly the amount in local currency field.. It is a calculated figure..
Yes, depending on the posting date, all those fiscal years need to e open for which you are posting the data.
LSMW is a tried and tested method for uploading open items.. Simple Go Ahead...
Regards,
SAPFICO

Gl, vendor and customer balances in program

I need to upload GL, Vendor and customer balances in single program(bapi or normal recording also.). If any body is having code for this and any thread is available please help me .. urgent...
Thanks inadvance
praveen

The Ope item balances may be taken adn clean the data.
For AP some clients curt the check and release it later .
If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
Create a GL account ( data conversion acccount)
Customer:
Dr Customer
Cr Data convertion accounmt
Vendor:
Dr Convertion Account
Cr Vendor
The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
Hope this is clear. Allot the points if you get some resolution for yr doubt.
Chitras

To update vendor and customer details in BP transaction

I have created a donor in the BP transaction . i need to update the vendor and customer details for the reated donor.
please can someone suggest some BAPI's or FM's which are available to do the same.

Hello Om,
You can get vendor/costumer number and their names in FBL3N when you get bank ledger's line item.
You must use BTE functions.
I don't your techinal skills about SAP but if you don't know ABAP or ABAP dictionary details, you can get help your ABAPer.
I will explain step by step.
First of all, if you don't use BTE before, You must create a product on FIBF.
Call FIBF transaction -> Settings -> Products -> ...of a customer
Create a new line,
Product : ZFI
Text : BTE Products for FI Exit
Product active : tick check fro activation.
Then you must call SE11 for structure RFPOS.
You must use append structure function for this structure and you can define ZFI_RFPOS append structure.
Define 4 fields.
Component : KUNNR - Component type : KUNNR
Component : NAMED - Component type : NAME1
Component : LIFNR - Component type : LINFR
Component : NAMEK - Component type : NAME1
Then save and active your RFPOS structure.
After that, you must do same step for structure RFPOSX.
Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very very important;
E_POSTAB = I_POSTAB.
Then you should add some ABAP code for getting customer & vendor details.
I give you some examples, you can use it. (next message on this thread, please check)
Then save and active FM.
Call FIBF transaction again.
FIBF -> Settings -> Process Modules -> ...of a customer
Define a new line.
Process : 00001650
Function Module : ZFI_INTERFACE_00001650
Product : ZFI
and this customizing.
Then you go to SE38 transaction.
start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
After those operations, you can see customer/vendor code and their names on FBL3N.
I hope it helps to you.
Regards,
Burak.

Tcode for Vendor and Customer Trial balance

Hi,
I want to generate Vendor trial balance & customer trial balance. I want name of each vendor and customer with the normal and special GL balance written against it
Ex:
Vendor A     -    Rs.100-
Vendor B     -    Rs. 2300-
Vendor C     -    Rs. 1000
Total -- XXXXX -
> This should match with my Vendor Reco account total.

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Uploading the GL, Vendor and Customer balances

What is the procedure to upload the Opening balances of GLs, Vendor and Customer balances using T Code F-02.

The Ope item balances may be taken adn clean the data.
For AP some clients curt the check and release it later .
If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
Create a GL account ( data conversion acccount)
Customer:
Dr Customer
Cr Data convertion accounmt
Vendor:
Dr Convertion Account
Cr Vendor
The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
Hope this is clear. Allot the points if you get some resolution for yr doubt.
Chitras

Create items by vendor and customer on Foreign Currency Valuation

Similar Messages

Maybe you are looking for