Forgot to assign Cost center for one of the GL account and positing are don
Hi All,
I have created GL account but forgot to assign Cost center to that GL, now some 1000 documents are posted in that account,
what is the best way to resolved this problem.
your respond is appreciated.
Thanks,
Supriya.
Hi Supriya
In such scenario, always keep the below 5 steps in mind
1. The T code is OKBA (and not OBKA)
2. Create the cost element and assign a default cost center in KA02
3. Execute OKBA by inputting the 1000 doc nos
4. All these vlaues will hit one single cost center
5. Now do a KB11N if you wish, to transfer the values from This cost center in KA02 to the desired cost center....
Regards
Ajay M
Similar Messages
-
Creation of multiple cost center for one emplyee
HI All,
I have requirement . one emplyee is working two projects so need create two cost centers for one employee.
please tell me how create multiple cost center for one employee.
Thanks&Regards
rameshhai.
if he works half the time... u can give 50%.. or just get it confirmed from core team member..
manu -
Assign Cost center for Price differences
Hi,
How to assign Cost Centre as default Cost Center for Price differences on any account?
Thank in advance.
SwethaHi Shwetha,
Goto OKB9 and assign your cost element to Cost center.
e.g. My price difference cost element is 60000 and cost center is 1234.
goto OKB9.
Company code,cost element and Cost center.
1000 60000 1234
If you have any issue with this,let me know i can help you.
Thanks,
Rau -
Assign Cost Center for Internal Consumption in Sales Order
Dear Experts,
I have a scenario is that Marketing Manager want to give a gift to his customer, the expense of this gift will be charged to Marketing Department. As the law, the invoice of this gift is required with the posting as below:
Dr Expense acc 5000 USD
Cr Revenue acc 5000 USD
(Assume that there is no tax)
I create a Sales Order with the Product is the Gift that will give to customer, and I also assign the Cost Center as Marketing Department. The problem is when I generate the billing document from this Sales Order, the system throw the error: Cost Center XYZ (Marketing Department) is not allowed posting revenue. This error happen because I don't want to post revenue to Cost Center, I want only Expense will be posted to Cost Center. But because I assigned Cost Center in header of Sales Order, system will post both revenue an expense to this CO object. Now what I want to do is post Expense to Cost Center, revenue to Profit Segment. Is it possible and what I need to do if it is possible?
Regards
Truc Nguyenplease try this.
please maintain revenue account in account determination
orgdist.cust a/cass. groumaterial acc.assi. groupaccount key. and revenue account.
Gajanan -
Multiple cost center for one cogs account
Hi Gurus,
We have created cogs account as cost element so that system picks relevant cost center at PGI.
Appreciate if you can tell how can system know which cost center should be entered in cogs line if there are multiple cost centers?????
Thank youHi Mohit,
You can specify in OKB9 on what basis different cost centers need to be picked.
Regards
Ajith -
Need to find out the Cost center for one location, one cost center
/* Formatted on 2015/02/27 08:34:29 AM (QP5 v5.215.12089.38647) */
SELECT DISTINCT cost_centre
-- INTO l_cost_center
FROM ( SELECT DISTINCT --pap.name position,
haou.organization_id org_id,
haou.LOCATION_ID,
pcak.concatenated_segments cost_centre
FROM -- per_all_positions pap
per_all_assignments_f pasf,
hr_all_organization_units haou,
pay_cost_allocation_keyflex pcak,
HR_LOCATIONS_ALL_TL l
WHERE pasf.organization_id = haou.organization_id
AND haou.cost_allocation_keyflex_id =
pcak.cost_allocation_keyflex_id
-- AND pasf.position_id=pap.position_id
-- and pap.primary_position_flag = 'Y'
-- AND haou.business_group_id=101
AND pasf.LOCATION_ID = l.LOCATION_ID
and l.language='US'
-- and l.organization_id=haou.organization_id
GROUP BY haou.organization_id,
haou.LOCATION_ID,
pcak.concatenated_segments --pcak.segment2
) Pos_cc
WHERE pos_cc.location_id =
(SELECT DISTINCT location_id
FROM hr_locations_all
WHERE location_code = 'Pinelands' --i.branch_name
AND ROWNUM = 1)
Please help me with this query, I am new to HRMS modules. Need to understand that why for one location it is coming multiple cost center.
Please help me understand this. I need to pass one value in INTO of this query.
Thanks,
Syed HasanCost centre is stored at the Organization level.
And many Organizations can have the same location, so for a location you can have different cost code combinations.
If you need just one segment(location segment), then it could be unique.
So , instead of pcak.concatenated_segments cost_centre use pcak.segmentX (X could be 1,2,3 etc based on your flexfield definition) -
why can i not copy songs i bought from the itunes store to a card to play in my car stereo.
what is m4a?M4A is another name (actually, the file extension) for the AAC audio format. It is used in iTunes, but frequently has compatibility problems when used outside of Apple-land.
Does your car player expect MP3 format? If so you can convert your files by following this guide: http://support.apple.com/kb/HT1550
Also, unless you enjoy doing format conversions, you also have the option to buy your music in MP3 format in the first place, from another music download store, e.g. Amazon MP3.
MP3 can be used in iTunes, iPod, iPhone and just about every other player, program, and device. -
Finding Cost Center for Position
Dear Gurus,
Wish you happy new year.
I had assigned Cost Center for a position for infotype 1018. So it should store in HRP1018. Am unable to find the filed in HRP1018. Where can I find that Cost center in table so that I can make a report based on that. I searched in HRP1001 also. It is not there in HRP1001.
Please help me where can i find the cost center for a position.
Thanks,
RaviThe Funding Approver is responsible for updating and maintaining Infotype 1018 (Cost Distribution infotype) and Infotype 9018 (Budget infotype). The Funding Approver is responsible for approving funds for positions.
The cost distribution record of a Position is held on Infotype 1018, and the budget information is held on Infotype 9018 (not available in this display).
Access Transaction:
Via Menu Path
SAP menu ==> Human Resources ==> Organizational Management ==> Expert Mode ==> PO13 - Position
Via Transaction Code
PO13 -
Hi All,
Please advice what r all the cost centers to be created for Sales & distribution category & admin category?
regards,
ArunkumarHi,
It depends as per company requirement, Cost center for SD may be marketing, selling and distribution,Administration ETC.
Regards,
Sreekanth -
BAPI or FM for NCOP Transaction (To assign Cost Center to Org Unit)
Hi,
We are searching for a BAPI or any other means to assign Cost Center to Org Unit.
recording this transaction is not so useful because the screen fields are not recorded properly.
Please advise if you had come across this transaction.
Thanks in advance,
NaguHi Prasad,
This is one of the answers i found in SDN itself check this
PP01> select the Object type (Org Unit)> enter the Org Unit No
Select the Cost Distribution Infotype--> Create & enter the Cost Center
Reward if it helps,
Satish -
Acc.assignment object replaced by current master cost center for employee
Hi,
I am facing a peculiar warning message while running the payroll posting run for only 2 employees. The warning message s as follows:
"Acc.assignment object replaced by current master cost center for employee
Message no. 3G399"
Prior to this, there were an error saying the
"Account assignment objects are incorrect. No substitution is possible.
Message no. 3G209"
Later we found that the Position was not assigned to that employee properly. I later assigned the correct position.. but still during the posting run the warning message appears.
Please let me know if this is okay or is this an error which restricts the postings.
Regards,
Balaji TRYour postings will go through with the first warning message. However, please be warned that any account assignment related entries (IT 0027, 2001, 2002) will be wholly ignored.
Check if any entries have been made to different cost centers for the erroring employees. If so, check for the reason why those entries have been made (since it is evident that the configuration does not support such entries). You may need to tie in with a CO consultant to ensure that there are no loose ends. -
Can we assign cost center to more than one company code.
Hi All,
Can we use same cost center for more than one company code to post the cost ? Or is it company code dependant?
Thanks,
KumarHi Kumar,
Although the cost center is created under a controlling area, we cannot extend to more than once company code in that controlling area. The Co.code field in Cost Center Master data cannot allow you to feed more than one company code.
But you can post some values from a company code other than the company code to which it is extended. In such case, inter company postings will trigger.
Hope this will clarify your issue.
Best Regards
Surya -
How to assign cost center to cost element.
Hello,
Can any one please guide how to assign cost center to cost element.
Thanks in Advance..
Have a nice day...Hi ,
There are 3 ways :
1. Default the cost center in cost element - Ka02 - account assingment tab enter cost center .
2. Use OKB9 for diffrent combinations as per your requirement .
3. Use GGB1 for substituting the cost center based on some conditions .
Regards ,
Dewang T. -
Validation for Cost center for Goods issue against the cost centers
Dear Friends
In my client place we have 6 plants are defined and profit centers are defined for each plant. Hence here each plant is one profit center. Cost centers are defined plant wise.
The requirement is when the goods issued to cost center system should check the cost center is defined against the plant. ( i.e., Cost center def against the Profit Center, and Profit center equal to Plant).
Is there any provision to assign the plant to profit center or vice versa?
Please guide me how to resolve the issue.
Thanks in advance.Hi
Please check EC01. May be it can help you. But in my view it is not possible. -
Why we assign cost center while posting to any G/L
Hi All,
I need one clarification.
Why we assign cost center while posting to any G/L, even though we have been assign cost center to the cost element it will post the co entry through cost element.
Please any one make me understand the internal logic and process of how cost element and cost center works.
Thanks
Nandha
help.sap.comFind below your clarification for the points
Why we assign cost center while posting to any G/L, even though we have been assign cost center to the cost element it will post the co entry through cost element.: Once you have assigned cost center to cost element in T.code OKB9 or KA01, no need of manually entering the cost center for the respecting primary cost GL while passing enteris.
Please any one make me understand the internal logic and process of how cost element and cost center works.: Whenever you post a cost to primary cost element , you require an object in Controlling , such as cost center to identify the costs. This primary costs are only created when the respective GL exist in the operational chart. Cost center is the location where cost incurs. Thus when you assign the cost to cost center , the cost will be booked against that particular location .
Maybe you are looking for
-
I can't edit in PhotoshopCC 2014; the file won't open.
Since upgrading to PhotoshopCC 2014, I can't open files to edit from Lightroom in it. Anyone else having this issue, and how do we fix it? http://www.pinterest.com/pin/create/extension/
-
Moving to the 2nd page on a web site and it turns white or black
This just seems to happen on loan sites, after I fill in the filed on the web sites first page. going to the second page the only thing that comes up is either a white page with nothing on it, or a charcoal black page with a link saying something abo
-
I have an iMac with OS 4 (Tiger, not SnowLeopard). Firefox 4 will not download due to this. Where or how can I download the older version of Firefox? 3.6? Thanks
-
Downloading MS Office Professional 2010
I purchased a replacement computer and I am trying to install my copy of MS Office Professional 2010. I went to office.com/productkeycard; entered my key card; and, got the prompt to start the download. After downloading I could not get the "run" p
-
How does WDT's 't0' synchroniz​e with computers clock?
When reading a MIO-16E DAQ card with the Waveform Data Type the t0 value returned is local date and sample time resolved to fractions of second. How is this value sychronized to the system time? How closely will date/time stamps generated by other 3r