Form error: No Valid Recipient

Can someone please help me troubleshoot this error when I go
to submit the
form at this URL:
http://www.emergesolutions-temp1.info/rfq_form.htm
Here's the first 6 lines of my form code:
<form action="
http://cgi.uk2.net/cgi-bin/uk2-formmail.pl"
method="post"
enctype="text/plain" Name="RequestForQuote"
id="RequestForQuote">
<input type="hidden" name="recipient"
value="[email protected]">
<input type="hidden" name="subject" value="Request For
Quote">
<input type="hidden" name="env_report"
value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT">
<input type="hidden" name="redirect"
value="
http://www.elcarim.co.uk/contact_confirm.htm">
<input type="hidden" name="print_blank_fields"
value="1">
I've been researching this for about an hour on the web and
what I am
finding is that this:
@recipients = &fill_recipients(@emerge-solutions.com);.
Needs to be inserted somewhere - but I don't know where.
Thanks in advance!

Your information appears to be correct. The exception I see
is from your form processing host. I found this on their help
pages: "PLEASE NOTE FOR SPAMMING PROTECTION YOU MUST GIVE A UK2.NET
RECIPIENT EMAIL
ADDRESS OR AN EMAIL ADDRESS? OF A DOMAIN HOSTED? WITH
UK2.NET."
In other words the recipient address is incorrect unless they
are your host. If they are, contact them for further
assistance.

Similar Messages

Tabular Form Error on Validation

Hello All,
APEX Version : 4.0.2
Database : Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
I created a wizard tabular form with just one editable column.( array = F02 )
Now I added another column using the syntax APEX_ITEM.DISPLAY_AND_SAVE(39,old_amount) as old_amt .
I added a plsql validation that loops through the array and checks for a particular business logic.
Whenever the validation results in an error, I notice an ERROR at the bottom of the page
report error:
ORA-01403: no data foundIs there any issue in the plsql validation ?
Please advice.
Thanks,
RD

Hello All,
APEX Version : 4.0.2
Database : Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
I created a wizard tabular form with just one editable column.( array = F02 )
Now I added another column using the syntax APEX_ITEM.DISPLAY_AND_SAVE(39,old_amount) as old_amt .
I added a plsql validation that loops through the array and checks for a particular business logic.
Whenever the validation results in an error, I notice an ERROR at the bottom of the page
report error:
ORA-01403: no data foundIs there any issue in the plsql validation ?
Please advice.
Thanks,
RD

Excel cannot open the new form. The Form contains schema validation errors.

i am running the approval workflow on a document library, while trying to open Excel
file i get the error.
Excel cannot open the new form. The Form contains schema validation errors.
Detailed error:
Element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body' is
unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}SharePointListItem_RW'.<o:p></o:p>
Expecting: {http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}WorkflowLink,
{http://schemas.microsoft.com/office/inf....
neeraj

Hi,
According to your description, my understanding is that when you are running approval workflow and opening the Excel file, then it will occur the error above.
For a better troubleshooting, I suggest you can try to create a new normal excel file and then run the workflow and open the file to test if it works. It will help to figure out if this is the file itself issue or the SharePoint issue.
Also, please provide some more detailed information such as screen capture, it will easier to find the root cause of the issue.
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Invalid Gift Unable to gift an item using iPhone 5s and iPad air, Error Message Invalid Gift. You must enter a valid recipient email address.

This has been going on for quite a while. I am able to send/purchase gifts from my iMac however; when I attempt to purchase a gift on my iPhone 5s (iOS 7.0.4) or my iPad Air (iOS 7.0.4 ) i get the following error message:
Invalid Gift
You must enter a valid recipient email address.
This happens no matter what email address I type in. Once this message comes up you can only select "OK". It never let's me finish my purchase.
Any ideas?

Hi there jphilyaw,
You may find the information in the article below helpful.
If you can't redeem your iTunes Gift Card or code
http://support.apple.com/kb/HT6021
-Griff W.

" ! Cannot send message - Message has no valid recipient "

Android version 4.4.4
Sony Xperia Z3 Compact
When I use the pre-installed Messaging app I get the following error message for some but not all contacts
" [!] Cannot send message
Message has no valid recipient "
I can't work out what is is about the contacts that results in the error but today I had the error when trying to text to an iPhone and a Blackberry. Just to be clear, some contacts produce that error message every time; some contacts work properly every time.
It's becoming more than a little frustrating and at the moment I'm wondering why did I not just get another iPhone?
Anyway, all suggestions gratefully received...

It gets a bit weirder.
Taking the contact I tried to text earlier:
If I go to the contacts app, and select the messaging icon next to his mobile number, the text message which I compose is sent properly.
If I open the messaging app, select write new message and select his name, the text is not sent and the error message appears.
It's not at all satisfactory.

Mailto form with spry validation won't open in IE

Hi,
I've created a mailto: form using Spry validation fields and have two issues.
1. I create the form, transfer it to the webserver and the validation fields work. But when I reopen the form in Dreamweaver to make changes, an error window comes up saying that there are widgets that no longer exist and some of the fields have lost their validation code.
2. The form works fine in Firefox, but in IE, you click Submit, it brings up the email window, but the content is empty.
Any suggestions would be greatly appreciated.
Here is the code:
        <form action="mailto:[email protected]" method="post" enctype="text/plain" name="review" id="review">
        <p> <span class="style9">
          <label><span class="style2">*</span><span class="style9">Title</span>
            <select name="Title" id="Title">
              <option selected>Mr.</option>
              <option>Mrs.</option>
              <option>Miss.</option>
              <option>Ms.</option>
            </select>
          </label>
</span>
            <span id="sprytextfield1">
        <span class="style2">*</span>
        <label><span class="style9">First name</span>
<input name="firstname" type="text" id="firstname" size="30">
        </label>
        <span class="textfieldRequiredMsg">A value is required.</span></span>
        <label><span class="style9">Middle Initial</span>
<input name="middleinitial" type="text" id="middleinitial" size="5">
        </label>
        <span id="sprytextfield3" class="style9">
        <span class="style2">*</span>
        <label><span class="style9">Last Name</span>
          <input name="lastname" type="text" id="lastname" size="30">
        </label></span>
        <p class="style2"><strong>STREET ADDRESS</strong></p>
        <p>
          <label><span class="style2">*</span><span class="style9">Street Address </span>
            <input name="streetaddress" type="text" id="streetaddress" size="100">
         </label>
          </p>
        <p>
          <span class="style9">
          <label>Apartment/Other
            <input name="apt" type="text" id="apt" size="100">
          </label>
          </span></p>
        <p><span class="style9" id="sprytextfield6">
          <label><span class="style2">*</span>City/Town
            <input name="city" type="text" id="city" size="75">
          </label>
        </span><span class="style9">     <span id="sprytextfield7">
          <span class="style2">*</span>
          <label><span class="style9">Zip Code</span>
            <input type="text" name="zipcode" id="zipcode">
          </label>
        </span></p>
        <p class="style2">MAILING ADDRESS (IF DIFFERENT FROM STREET ADDRESS)</p>
        <p>
          <label><span class="style9">Street Address
            <input name="mailingstreet" type="text" id="mailingstreet" size="100">
          </span></label>
        </p>
        <p class="style9">
          <label>RR/PO/Apt.
            <input name="mailingPO" type="text" id="mailingPO" size="100">
          </label>
        </p>
        <p>
          <label><span class="style9">City/Town</span>
            <input name="city2" type="text" id="city2" size="75">
          </label>
          <span class="style9">
          <label>Zip Code
            <input type="text" name="mailingzip" id="mailingzip">
          </label>
          </span></p>
        <p class="style2">CONTACT INFORMATION</p>
        <p><span class="style9" id="sprytextfield12">
        <label><span class="style2">*</span>Home Phone
          <input type="text" name="homephone" id="homephone">
        </label>
        </span><span class="style9">
        <label>Work/Other Phone
          <input type="text" name="workphone" id="workphone">
</label>
</span></p>
        <p class="style9"><span id="sprytextfield17">
        <label><span class="style2">*</span>Email
          <input name="email" type="text" id="email" size="75">
        </label>
        <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span>          </p>
        <p class="style9"><span id="sprytextfield4">
        <label><span class="style2">*</span>Re-Enter Email
          <input name="reenteremail" type="text" id="reenteremail" size="75">
        </label>
        <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span></p>
        <div id="spryradio2">
          <table width="587">
            <tr>
              <td colspan="3"><p class="style9"><span class="style2">*</span>Preferred Contact</p></td>
            </tr>
            <tr>
              <td width="92"><p>
                <span class="style9">
                <label>
                  <input type="radio" name="PreferredContacts" value="email" id="PreferredContacts_0">
                  Email</label>
              </span></p></td>
              <td width="200" class="style9"><p class="style9">
                <label>
                  <input type="radio" name="PreferredContacts" value="workphone" id="PreferredContacts_2">
                  Work/Other Phone</label>
              </p></td>
              <td width="279" rowspan="2" class="style9"> <p><span class="radioRequiredMsg">Please make a selection.</span></p></td>
            </tr>
            <tr>
              <td><p>
                <span class="style9">
                <label>
                  <input type="radio" name="PreferredContacts" value="homephone" id="PreferredContacts_1">
                  Home Phone</label>
              </span></p></td>
              <td class="style9"><p class="style9">
                <label>
                  <input type="radio" name="PreferredContacts" value="usmail" id="PreferredContacts_3">
                  U.S. Mail</label>
              </p></td>
            </tr>
          </table>
                 </div>
        <p class="style9"><span id="sprytextfield16"><span id="sprytextfield11"><span id="sprytextfield2">
          <label><span class="style2">*</span>Birth Date (mm/dd/yyyy)
            <input type="text" name="birthdate" id="birthdate">
          </label>
          <span class="textfieldRequiredMsg">A value is required.</span></span><span class="textfieldRequiredMsg">A value is required.</span></span><span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span> </p>
        <p>
          <label><span class="style9">School (If Attending)</span>
            <input name="school" type="text" id="school" size="75">
          </label>
          <span><br>
          <span class="radioRequiredMsg">Please make a selection.</span></span></p>
        <p>
        <span class="style9">
        </span>
          <span class="style9">
          <label>
            <div align="center">
            <div align="center">
              Submit
              <input type="submit" name="submit" id="submit" value="Submit">
              Reset
              <input type="reset" name="reset" id="reset" value="Reset">
          </div>
          </label>
          </span>
        </form>
        <p> </p>
      <script type="text/javascript">

      </script>

Have a look at the following
        <p class="style9"><span id="sprytextfield16"><span id="sprytextfield11"><span id="sprytextfield2">          <label><span class="style2">*</span>Birth Date (mm/dd/yyyy)            <input type="text" name="birthdate" id="birthdate">
          </label>
There are no inputs for the following
var sprytextfield5 = new Spry.Widget.ValidationTextField("sprytextfield5");
var sprytextfield6 = new Spry.Widget.ValidationTextField("sprytextfield6");
var sprytextfield8 = new Spry.Widget.ValidationTextField("sprytextfield8");
var sprytextfield14 = new Spry.Widget.ValidationTextField("sprytextfield14", "email");
var sprytextfield15 = new Spry.Widget.ValidationTextField("sprytextfield15", "email");
var spryradio1 = new Spry.Widget.ValidationRadio("spryradio1", "preferredcontact");
var sprytextfield13 = new Spry.Widget.ValidationTextField("sprytextfield13", "email");
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2");
Don't do this, it invites BIG trouble
<form action="mailto:[email protected]" method="post" enctype="text/plain" name="review" id="review">

Forms Multi-row validation

Forms Multi-row validation
I have a requirement to show a validation error at form ‘At least one reviewer should have more than zero amount limit'. So we need identify highest amount limit entered in multiple rows, that highest amount limit should be >=1 if not show an error.
Level Reviewer Amt limit
1 ABC 0
2 MNP 0
3 XYZ 0
In the above case I need show an error msg. I tried pre-insert. It didn’t work because built-in not supports pre-inserts.
Pls advice the best methodology to has shown error in this kind of scenario.

Hi,
Create a Summary item based on Amt limit.
Then in pre-insert check the value of summary item. If it is < 1 then, raise error .
Regards

In F110 I getting error No valid Payment method found but i did

While doing intercompany clearance using Pay methd Y in F110 payment run in payment proposal system showing error "No valid payment method found" this is showing in vendor line item and if i am clicking customer line item showing debit bal still exit because system not picking my pay mthd Y in vendor line item which one i assigned in vendor master data. But for another vendor its posting clearing this error occur only for particular vendor. Any can help me to rectify my error.

Hello,
We were get the same error message and found that the solution was that the vendor must have an address.
In OBVU, Payment method / country, the required master record specs had Street checked on. This reqiured an address for the vendor. Once we entered an address the F110 payment run was successful for this vendor.
Rgds,
Dan

I*sqlplus: Internal error (no valid library could be found)

Hello
I have installed Oracle 8.1.7 on Windows NT
and Oracle 8.1.7 on Sun Sparc Solaris.
On Windows NT, I have installed i*sqlplus.
However, when connecting from browser
in the index file
I've given a valid username/password of
a database in Oracle 8.1.7 on Sun Sparc
and a connect string to the database
on Oracle 8.1.7 on Sun Sparc.
This connect string is created using
Net 8 assistant and this connect string
is on the Windows NT with Oracle 8.1.7.
However, instead of connecting I
am getting the error
Internal error : (no valid library could be found)
Can you please help me?
Thanks

Cyril,
Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
Review the installation documentation, and/or post more specific information on your set up.
Alison
iSQL*Plus Team

ISA B2B logon Error: No valid private connection for internet user

Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
     at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
     at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
     at com.sap.isa.businessobject.User.login(User.java:143)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
     at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
     at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: Blackman

Its a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too

ISQL*Plus: Internal error (no valid library could be found)

I install iSQL*PLUS on middle tier (9i AS 1.0.2.1) according to documentation, when I trying to connect I am getting Internal error (no valid library could be found). The TNSNAMES.ORA file is correct.
Any suggestions will be highly appreciated.

My first suggestion is to use the HTTP listener on the RDBMS bundle. This is what iSQL*Plus 8.1.7 Beta was built for.
The HTTP servers on the iAS and Database releases require mods to be compiled differently.
- CJ

Disk Utility Error "no valid packages"

Hi,
I have a PowerBook G4 with 1GB RAM.
I've noticed a significant system slowdown lately. Programs take longer to open and respond, and it's rather annoying. I came to the forums to seek some remedy, and tried to run a Disk Utility to check that everything there is at least okay. But when I click on verify permissions, I get an error that says "no valid packages." Does anyone know what this means and how to fix it (if it needs fixing; I'm assuming this isn't a good thing, whatever it is!).
Thanks.
Lori

Hi librarygirl and Welcome to the Discussions!
Mac OS X 10.3, 10.4: Disk Utility shows a "No Valid Packages" alert
Disk Utility can't verify or repair permissions on the Mac OS X 10.3 or 10.4 volume if the "BaseSystem.pkg" file is not in /Library/Receipts.
This alert appears when you try to repair permissions with Disk Utility:
"First Aid failed
"Disk Utility stopped repairing permissions on '(volume name)' because the following error was encountered: No valid packages"
In the Disk Utility text window, this message appears in red text:
"Error: No valid packages (-9997)"
This happens when the BaseSystem.pkg file is not in /Library/Receipts.
Solution
If you've moved this file, move it back to /Library/Receipts. You shouldn't normally remove any files from /Library/Receipts.
If the file has been deleted, replace it by copying it from a different computer that uses Mac OS X 10.3 or 10.4, or by reinstalling Mac OS X 10.3/10.4 from an installation disc.
"Reinstall" means you can install 10.3 or 10.4 from a disc, if it's the same version of 10.3/10.4 (such as 10.3.3 on both the installation disc and computer). If the version of 10.3/10.4 on the computer is newer than what's on the install disc, then use the install disc to perform an Archive and Install installation instead, then update to a later version of Mac OS X.
Joe

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            myReportDocument.Load("C:\Reports\stoppages.rpt")
            myReportDocument.SetDataSource(myDS)
            Session.Add("Report", myReportDocument)
            crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

Hello,
Iam facing this issue at the time of hiring (IT0000). The internal number range (01) is maintained in transaction code PA04 from
00000001 to 90000000 and ext check box is NOT checked. In NUMKR , the return value of the feature is also 01 .
Now the weird thing is i get this so called error " No Valid Interval Found (Internal Number Assignment)" but if i ignore the error and hit enter / save , it lets me save IT0000 and moves on to the next infotype in infogroup.
has anyone faced this before? what could be the possible solution here? Any help would be greatly appreciated
thank you in advance
Reema

Hey Reema,
http://www.sapfans.com/forums/viewtopic.php?f=11&t=327031
NUMKR-Feature
I think these are similar threads and have the same problem as you. Hope Partha Murli picks this up or you might just mail him.
cheers
Ajay

Costing Run Error: No Valid Source of Supply

Hi Experts,
   I am new to Costing,
    While executing Costing Run for a matrial ABC in plant XXX with a Costing Run 111, I get an error No valid source of supply could be found
but when I run the Costing Run for Same material for sam plant with different Costing Run It gets executed properly.
I have read the thread related to it where it is giving reference to note 713111, 499699 and 422926 but there is no check for Source List in Material master.
Regards,
Rajdeep Rane.
Edited by: Rajdeep Rane on Jul 24, 2008 1:30 PM

Rajdeep
Use OKKN as Jigar says.
Select the costing variant that you are using and then click on "valuation variant"
Look at the tab for subcontract - this will show what the costing variant is useing to creat cost estimates with.
Your options for subcontracting are:
2 Effective Price from Quotation Without Fixed Costs
3 Net Quotation Price
4 Gross Quotation Price
5 Effective Price from Quotation
6 Effective Price from Purchase Order Without Fixed Costs
7 Net Purchase Order Price
8 Gross Purchase Order Price
9 Effective Price from Purchase Order
If your material has a Special Procuremnet key 30 - then one of these strategies has to be used.

Form error: No Valid Recipient

Similar Messages

Maybe you are looking for