Form - saving some data

Hi! I have one question - is it possible? I have the form with dozens of active fields (textfields) to fill. Each time entering data in a certain field causes the next time you open the file field is filled. Is it possible (for example using JavaScript)?
Thank You in advance

Hi,
Yes, it's possible. You need not to worry about saving data of certain fields. As it's will be saved when the user clicks the save button before saving it.
Now, the challenge is, you need to clear the data of those fields which you don't want to save.
In the docReady event of the form i.e when the form is ready, you need to check whether those fields(whose data need not to be saved) contain data or not. If it contains some data then you need to clear that data when the form loads.
For ex : If you have a field called TextField1 whose data should be cleared and not saved when re-opening the form.
In the docReady event you can write the following script.
If (TextField1.rawVale != null)
TextField1.rawValue = null;
Thanks,
Bibhu.

Similar Messages

IPad Error" There was a problem saving some data to the devices cache"

We have purchased the app Environmental Science Buddy and there are presentations that can be viewed but I receive the above mentioned error when trying to play them on our school network. Took an iPad home and just as I thought no problem loading the presentations. I have gone through our firewall and its allowing the website that the data is coming from and I even added it to the allow list just to be sure but I am still receiving this message Any help would be greatly appreciated as I have this app on nearly 100 iPads!!!

Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

Form created with LiveCycle is not saving the data of a fillable form.

I had posted this in another forum, which got moved over to this forum. Forgive the double post, I wasn't sure if it was assumed that it was resolved.
This document: http://www.southark.edu/employment/application-v5.pdf was created a couple of years ago in Acrobat and LiveCycle.
I wanted visitors to have the ability to fill in the document and save their data.
So, I opened it in Adobe Acrobat X and saved it using the Save As > Reader Extended PDF > Enable Additional Features.
However, after filling in the document and saving, no data is saved.
I was informed that since it was an XFA form created in LiveCycle Designer, that they have special considerations that don't apply to forms created in Acrobat.
Still needing help in giving my visitors the ability to save their form data.
Thanks,
Charley

Thanks so much for your reply.
Employing your solution our website visitors can save the data using Acrobat Pro.
They cannot save their data using Reader (most of them don't have Acrobat Pro). See image below.
Any other thoughts?
Thanks very much for your time and interest.
Charley

Treo 755p The free data storage space on the device is low. Some data could not be saved

After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint)

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

Darrell,
Thanks for this response. After I posted mine, I saw that the resetForm JavaScript method is documented as being supported starting with version 10.5: http://www.adobe.com/devnet-docs/acrobatetk/tools/Mobile/js.html
But I haven't been able to get it to work. Can you clarify if support was indeed added and if it works for you?

Put some data form the databse of SQL Server into SAP and auto general PR?

Dear all,
Can you tell me how I can put some data from the databse of SQL Server into SAP and auto general PR?
Best regards,
Merryzhang
Edited by: merry zhang on Feb 4, 2009 9:10 AM

Hi Zhang,
If i have understood your question properly, I guess you wanted to create Purchase Requistion automatically right?
Then you have lots of option simpilest one would be create a couple of Z table with all the fields that you require for header and Item.
create a Program and use BAPI function module to create the PR by reading the values from those Z tables. after creation delete the contents from the table. Schedule this program in Background periodically like everyday or weekly once however you would like it to be. So once the table has contents in it and when the program runs it will create the PR's (Purchase Requisition).
You can also use a workflow with the Z table. Once the Z table is filled you can trigger a workflow based on the Table change. I'm not sure like how to do it but I nkow that this process can also be used.
Hope this might have thrown some light upon.
Thanks,
Prashanth

Using interactive form to capture data from user u0096 please helpu0085.

Hi folks,
I am trying to use an interactive form to capture some data from the user.
This is what I have planned to do
User runs a program which will have four function module calls
(FP_JOB_OPEN
FP_FUNCTION_MODULE_NAME
'Function modules which the above function module returned'
FP_JOB_CLOSE)
This will display a print box where I can click on the print preview to get the interactive form.
From here I am not sure how to go about, but following is what I can think
Once the user enters the data in the form and he should be given some button to click(say save). This button click should trigger the program (PAI) which will read the data from the form (this data will be saved to a Z table)..
First of all, Can I do this? Please guide
Note: I am not using WebDynpro ABAP or JAVA. Rather I am trying to use a Module pool + interactive form solution.
Thanks in advance

could you tell me how to read data from the form ? which function module(s) to be used ?

Blank form fields with data?

I've created a form in Acrobat and sent it to a few people to test. When they send it back to me, some people say even though they saved their data, when it's previewed in their browser (email) it looks blank. When I receive forms sent back to me, the form appears blank, but when I click in the field, the answer appears.
How can I fix the form so that no one is confused by a blank form after they fill it out? I'm not concerned about receiving the blank forms since there is data, I'm more concerned that a customer will see a blank form after they've filled it out and get frustrated.
BTW, we've tried opening the forms returned to us in MAC and PC, same problem.
Thanks,
D

The problem occurs when the Preview application on a Mac is used to fill-in the forms. It is well known the Preview corrupts PDFs in a number of ways and it should be absolutely avoided when using PDF forms. The damage it does to a document cannot be repaired, but you can open the corrupted form in Acrobat, export the form data (to an FDF or XFDF file), and import it back into a blank form. Then inform your users to use Adobe Reader and not Preview.
Also, some PDF viewers (e.g., iOS's built-in viewer) have no support for PDF forms at all, so forms will appear blank when opened. The fix for this is to have them open the form in Adobe Reader. This is assuming the form was not corrupted with Preview.

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Not saving the data in two tables

Hello,
its my production problem, i have an update form where you can update the records and these
records will sit in the temp tables until the final approval from the supervisor.
In this update form i have two table where i am saving the data one is dup_emp to save the
officer data and another is the dup_address to save the officer where he worked data.
in this form address form is pop up screen where you can update and gets back to the original
form where you can see all the other fields. my problem is if a user hit the cancel button on
address form example the user doesnt want to update any information on that screen so user
cancel that screen, and comes to the other screen where the user makes the changes to the
appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
data not the address data from the address form to dup_address table for the same record.
if the user cancels in both the screens cancel button it should delete the record from both the
tables but cancel in form and saves in another form it should save the record in both the
tables.
here is my code from both cancel buttons from both the forms.
this is code is from address form cancel button.
delete from dup_address
where address_id=:address_id
and parent_table_name='emp';
commit;
CLEAR_BLOCK;
go_block('DUP_EMP');
This code is from dup form of the cancel button
declare
temp_address_id varchar2 (12);
begin
delete from dup_emp
where secondemp_id =:dup_emp.secondemp_id;
delete from dup_address
where parent_t_id=:global.secondemp
and parent_table_name='emp';
commit;
clear_block;
go_block('secondaryemp');
END;

Hi,
As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
Regards,

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

How to use one form to submit data to 2 tables on mysql

Can someone please help me on this,
I am developing a jsp website and I want to use one form to submit data to 4 tables on mysql database and the tables are related by one foreign key.
Can someone bail me out of this ....I've hit a hard brick wall!!!!...

kwesij wrote:
Can someone please help me on this,
I am developing a jsp website and I want to use one form to submit data to 4 tables on mysql database and the tables are related by one foreign key.
Can someone bail me out of this ....I've hit a hard brick wall!!!!...What's the problem? What does a brick wall look like?
Connect to the database and execute four SQL INSERT/UPDATE statements as a single unit of work. The fact that you have one form shouldn't be an issue.
I'll bet you're having trouble because you haven't layered the problem either in code or in your mind.
I'd recommend that you write a POJO to take in some objects and execute the SQL. Once you have that running successfully you can worry about the form. Decouple the two.
Computer science is all about decomposing large problems into smaller ones.
%

Saving array data from a waveform chart

I am using a CRIO 9004 and a 9237 bridge module to measure some strains from strain gauges. I've got one timed loop that reads the DMA FIFO and puts the arrays of values (16 data points, 4 per channel) into a queue. In the consumer timed loop a For loop scales the binary data, auto indexes it into arrays, then the arrays are merged into a 2D array for the four channels displayed on a waveform chart . Everytime the consumer loop runs it indexes 4 data points (per channel) yet the waveform chart plots them in a consecutive manner and doesn't overwrite the previous four. If I convert the arrays to waveform arrays I don't see anything on the waveform chart.
If I pass the 2D array of data to a array indicator inside or outside the consumer loop I get only 16 data points. I want to save the information that appears on the waveform chart after the consumer loop but because I'm not using waveform data type I can't use the write waveforms to file vi. The waveform chart history buffer has been set to 195360.
Idealy we will run the four channels for 120 seconds charting the data and saving the data. The minimum data rate is 1613kS/s (403 per channel) The data can be saved after the loops have finished gathering and processing or while they are running. I noticed when I tried to write to TDMS it slowed the consumer down. Same thing if I use a shift register with the volume of data.
I suspect I'm not sending data to the chart in the correct manner ( usualy takes two attempts to "clear chart" using shortcut menu). I'm not too familiar with timed loops /producer consumer loops and just tried to put something together based on examples.
I've attached my host vi and front panel screenshot.

Hope they appear attached this time.
Attachments:
Basic DMA (Host).vi ‏444 KB
screenshot2.jpg ‏113 KB

How to open a pdf form with fdf data

Hi all,
I am working on a new project. In that, I have to load a PDF contract form with FDF data on Internet Explorer Window.
I don't know how to do it. Actually I tried using this format on the URL (while loading the respective page)
http://www.example.org/pdf_file_name.pdf#FDF=http://www.example.org/fdf_file_name.fdf
But it opened as an empty pdf document. . Actually I need it with the fdf data.
Can anyone know any other way to do this?
Or is this not possible to open a pdf form with fdf data in a browser?
Thanks in advance
Annamalai

@ Bernd. It still opens a text file
Here's my FDF file sample
%FDF-1.2
%âãÏÓ
1 0 obj
<<
/FDF << /Fields
<</V (07/22/2009)/T (Loan_Note_Date)>><</V (22.29)/T (Loan_AnnualPercentage_Rate)>></V ()/T (Seller_ESignatureArea1_Date)>><</V (GA Dealer)/T (Seller_Signer_FullNameTitle)>><</V ()/T (ThirdParty_ESignatureArea1_Date)>>
/F (MARSMFLZ.pdf)/ID [ <1f0b6b55f345db39e8246247138fe562><e960588530b0d06d35cd618b34d4c314>
]>>
>> endobj
trailer
<<
/Root 1 0 R
>>
%%EOF
(I have uploaded the related pdf file before.)
Just now I got an idea to use WScript (the code is written in javascript)
ws = new ActiveXObject("WScript.shell");
ws.Run('"AcroRd32.exe" "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf"', 1, true);
this opens my fdf document in Acrobat reader using command prompt.
I have a doubt now, can i use some string in place of "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf" in the above command?
I mean something like fdf_file = "C:\\annukar\\Refi\\Refinance_Module\\Forms\\Contract.fdf"
and replace ws.Run('"AcroRd32.exe" fdf_file,1,true). I tried it but it doesn't work Any idea's? Since the path will not remain the same always. So i need to change it

Form - saving some data

Similar Messages

Maybe you are looking for