Form seem to hang

This is regarding Adobe form server 6.0 Not sure whether the right place for this post..But couldnt find anyother forum for same
We are using Form Server 6.0 deployed through Jboss 3.2.2. The request to Jboss is redirected from IIS through Jakarta filter.
Sometimes, clicking on a navigation button rather than moving to intended page, , progress bar is shown in the bottom of the page and it continues to show the same as if stuck. This behavior is not consistent. Thus, unable to track the reason for same.
Please help

Hello Kyle,
First I should say that using WinForm to develop games is not a good idea. Anyway, if you just want to learn to programming with WinForm, let's just check your problem.
Please notice that MSDN is always the first place for us to know details. So let's see the trackbar:
https://msdn.microsoft.com/en-us/library/system.windows.forms.trackbar(v=vs.110).aspx
As you can see, there is a example and the following code will help you how to set the value:
// Set up the TrackBar.
this.trackBar1.Location = new System.Drawing.Point(8, 8);
this.trackBar1.Size = new System.Drawing.Size(224, 45);
this.trackBar1.Scroll += new System.EventHandler(this.trackBar1_Scroll);
//Scroll it.
private void trackBar1_Scroll(object sender, System.EventArgs e)
// Display the trackbar value in the text box.
textBox1.Text = "" + trackBar1.Value;
The first part of code controls the trackbar's location,size and it's scroll event.
You can do something like this so that you can also write trackBar's value property.
For details about this value, see here:
https://msdn.microsoft.com/en-us/library/system.windows.forms.trackbar.value(v=vs.110).aspx
If you just want to know the value at runtime, add a button and write it like the following:
private void button1_Click(object sender, EventArgs e)
MessageBox.Show(trackBar1.Value.ToString());
And the result will be:
You can also choose to set the value at your + and - button event.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • HT204370 I purchased a movie yesterday and started the download.  The download seemed to hang up at about 90%.  Finally, it showed that it was ready to watch, but the movie will not play.  Download is apparently corrupt.  How do I get a working version?

    I purchased a movie yesterday and started the download.  The download seemed to hang up at about 90%.  Finally, it showed that it was ready to watch, but the movie will not play.  Download is apparently corrupt.  How do I get a working version?

    Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iPad and redownload it via the Purchased tab in the iTunes store app (or the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes).
    If you aren't in a country where you can re-download films, or if you have problems with the re-downloaded version, then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • [solved] Laptop seems to "hang up" when trying to suspend2

    I finally got a new notebook, a Thinkpad X60. Today I tried to switch from vanilla- to suspend2-kernel (the one that I had running on my old notebook as well). When trying to "hibernate", I get output on the console until "Doing atomic copy." Then the laptop seems to hang up and does nothing for ages. But when I change to another console and back, the computer turns off... I don't know why.
    Starting the system again results in resuming the image - so it seems it has been correctly writen on my swap-device. But the console I come back to on resuming is unusable! I see the output made by 'hibernate' and a prompt. But I don't get an outpu if I type something. Typing blind, something as 'exit' or 'reset' doesn't work either.
    What's wrong there?
    Last edited by saciel (2007-07-21 23:31:38)

    Ok, I got it... same fix as for this problem:
    http://bbs.archlinux.org/viewtopic.php?pid=250074

  • DBMS_LOGSTDBY.BUILD Seems to Hang

    Hi Group,
    One step on the logical standby creation is to execute the package DBMS_LOGSTDBY.BUILD, however it has been executing for almost three days and it does not return the sql promt, I read about metalink note 747495.1 DBMS_LOGSTDBY.BUILD Seems to Hang And Does Not Return To SQL prompt which says that package waits for all transactions to finish, so I restart the primary database in restrict mode, so anybody can connect, and execute DBMS_LOGSTDBY.BUILD again during this weekend. The same result, it didn't finish execution.
    Any idea about what it could be.
    Thanks a lot.

    Imran,
    The information from alert log file is not sufficient.
    Can you log switch on primary and monitor whether it is archiving in standby or not.
    and you can monitor the changes in "v$managed_standby"
    Also check for the errors using "v$dataguard_status"
    SQL> select error_cdoe, message, timestamp from v$dataguard_status where dest_id=<n>;

  • Forms 10g r2 hang on VMS/RDB

    hi
    we have an application built in FORMS 10G R1 (9.0.4) on VMS/RDV database
    when we are upgrading to FORMS 10G R2 , some times when you compile the forms the compilation hangs and somtimes when you run the form the form gove no respons at all .
    any one could help for that
    thank's

    maybe the suggestion in this post can help?
    see Running local OC4J and Webforms hangs

  • Lightroom mobile sync "hangs" - I am trying to sync several small LR collections from my desktop computer.  The first collection syncs, and then Lightroom syncing seems to hang.  It shows "Syncing 150 photos" in top left, but never progresses even after c

    I am using Lightroom 5.5 on OS X.  I have created several small collections with about 180 images and I am trying to sync them via Lightroom mobile for later iPad access.  The first collection syncs properly, and then Lightroom syncing seems to hang.  The label in the upper right shows "Syncing 150 photos" but does not count down.  Opening and closing LR does not restart the process.

    PROBLEM STILL EXISTS...
    I spoke to soon!  I tried adding a couple of more collections to sync.  Lightroom shows "Syncing 814" photos on upper left, but never apparently syncs any.  If I exit Lightroom it notifies me there are 814 images to sync.  When I reopen it seems to pick up and stall where it left off.  These new collections are not posting - this is the same problem as before.
    I am pretty sure there is a serious bug in Lightroom here.  I encourage support to contact me.

  • I started Boot Camp on a MAC mini but then  had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  Can I recover?

    I started Boot Camp on a MAC mini but then  had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  How can I recover?

    Welcome to the Apple Support Communities
    That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
    If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

  • The synch process seems to hang (stop) for my iphone 3

    The synch process for my iphone 3g seems to hang up but doesn't give me any error message. It's been 1.5 hours with no progress.

    The synch process for my iphone 3g seems to hang up but doesn't give me any error message. It's been 1.5 hours with no progress.

  • Media uploads seem to hang, no progress bar,

    HI set up a client to use use media downloads, however, upon creation and section of a file to upload, any file over 1 mb seems to hang and not upload at all, I tried a 35 meg file and left it ot an hour, and nothing happened, just a blank window with not text appeared after selecting a file,  It says you can select up to 100 megs....

    Yep, there are Zero indiciations of file handing in the new uI. People been saying this for some time.
    File Manager hangs uploading files from time to time be it media downloads or just images in the file manager or through pages etc.
    Also you have the crazy state of affairs where the link manager wont allow you to link to images or other files any more. Changes made to these things a few months ago lost a lot of functionality and since have had layout and functionality issues

  • JDBC Driver.connect seems to hang.

    I've been using DriverManager.getConnection to get a connection to MySQL. This has been working fine until I tried to use it from a Threaded part of my application.
    It seems to hang when it gets to the DriverManager.getConnection line and never return.
    I googled about for hours and came up with that there may be a bug in DriverManager.getConnection which causes a deadlock. So I tried using the connect method directly on the driver but got the exact same problem of it hanging on that line.
    I tried running my application (in Netbeans) with the 'Debug File' mode rather than just 'Run File' and everything works perfectly! No problems, which just seemed strange.
    If anyone could point me in the right direction I'd be very grateful. I can supply more details if need be :)
    Cheers,
    stu.

    It seems to hang when it gets to the
    DriverManager.getConnection line and never return.Have you actually verifed this, for example by putting System.out.println statements before and after the getConnection() call? "Seems to..." implies that you're making an assumption which may not be true.
    I tried running my application (in Netbeans) with the
    'Debug File' mode rather than just 'Run File' and
    everything works perfectly! No problems, which just
    seemed strange. Doesn't seem too strange actually. That's what "race conditions" and deadlock conditions are about -- different timing in the app will cause different results.

  • RMAN Backup Seems To Hang - Never Finishes

    We have a short RMAN block tracking backup script running on four different 11gR1 RAC DBs (11.1.0.7.5). This script only backs up changed records and it has worked fine on all of the 4 RHEL 4-based DBs for many months w/o issue and w/o any changes to the script. Recently, it has encountered an issue on just one of te single RAC DBs. On this DB it runs for days and I eventually have to kill it. The only error I can see in the alert logs is:
    ORA-00235: control file read without a lock inconsisten due to concurrent update
    I don't know if this error is related to our issue as I see it before the backup starts and quite a bit in subsequent alert (and trace files) logs during the backup. I also realize that this error can often be ignored as being attributed to concurrent activities and that retries can sometimes solve the issue. The first message I see i the log after the backup starts is "Incremental restore complete if datafile 45 to datafile copy /flash/RAC1/datafile/01_mf_mpd_02_6bw0cdy6_.dbf." We obviously use Oracle Managed Files (OMF) and the backup directs the files to be copied over to a flahs area to then be scanned for changes.
    I typically run the script from a cron, but this error happens even when I run it from the command line. I normally run it from the 2nd node of the 4 node cluster. Of additional note is a large amount of 2-way streams replication that we run on this DB to/from another DB. The latter DB has no issues with the same backup. I mention this because of the large amount of LogMiner activity that is sometimes goin on along with regular users.
    The backup seems to be doing all of the correct things as it always has as you see messages in the backup log indicating channels allocated, stasrting incremantal backups, recovering data files, reading backup pieces form flash, skipping archive logs previously backed up (ALOT of previously backed up archived logs). Again, NO ERRORS appear in the log. The last few lines of the log (before I terminate the run) are:
    input archived log tread=1 sequence=110567 RECID=485848 STAMP=746169926
    input archived log tread=1 sequence=110568 RECID=485849 STAMP=746170951
    input archived log tread=1 sequence=110569 RECID=485850 STAMP=746171860
    input archived log tread=1 sequence=110570 RECID=485854 STAMP=746173097
    channel ORA_DISK_4: starting piece 1 at 22-MAR-11 <---- this is always the last line of output in the log
    I would include the entire log, but our company does not allow us to do this because of security issues. Otherwise, I would include it here. However, I have copied the script in question below to help in problem resolution. This hang condition occurs reagardless of whether thiere is high or low activity on the DB - which is a TEST DB. I just need to get this fixed.
    ---------------------SCRIPT---------------------
    # backup_hot.sh
    #!/bin/bash
    if [ -z "$1" ] || [ ! -z "$2" ]; then
    echo; echo "usage: backup_hot.sh DB_NAME"; echo; exit
    fi
    TGT=`echo $1 | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ`
    LOG_DIR=/apps/oracle/oracle_home/RMAN/scripts/Log
    # Setup ORACLE_SID, ORACLE_BASE, ORACLE_HOME, PATH
    case $TGT in
    RAC1) . ~oracle/rac1.env ;;
    RAC2) . ~oracle/rac2.env ;;
    FRAC1) . ~oracle/frac1.env ;;
    FRAC2) . ~oracle/frac2.env ;;
    *) echo; echo "exit: unrecognized database target"; echo; exit ;;
    esac
    /apps/oracle/product/11.1.0/db_1/bin/rman target sys/mypwd CATALOG rman/[email protected] log $LOG_DIR/`date +%F_%T`_${TGT}_backup_hot << EOFrun
    recover copy of database with tag 'incr' until time 'sysdate-7';
    backup incremental level 1 cumulative copies=1 section size 1g for recover of copy with tag 'incr' database;
    report schema;
    backup archivelog all not backed up skip inaccessible;
    backup current controlfile;
    backup spfile;
    change archivelog all crosscheck;
    crosscheck backup;
    crosscheck copy;
    delete noprompt obsolete;
    delete noprompt expired backup;
    restore database validate preview;
    restore spfile validate;
    restore controlfile validate;
    sql 'alter database backup controlfile to trace';
    EOF
    --------------------END OF SCRIPT------------------------
    Thanks for any help.
    Matt

    No idea, but some clarifications:
    Are they all running the exact same script, or copies? If the latter, look for spaces after the EOF. Check the date on the .env file, too, in case someone modded it and left some garbage that makes itself known later.
    EOFrun a copy past typo, or is that an indicator of something screwy in your script?
    I believe there is some log buffering going on, so there may be more stuff not written out to the log. So I think it is getting past the starting piece one. If you break up the subsequent commands into their own run statements, maybe it will become clear what is actually stopping.
    I believe there is large pool usage, what are your large pool settings.
    NFS anywhere in your configuration?
    What is $2?
    Maybe the controlfile is the problem, maybe the crosschecks are hanging because something else is locking them out... are you sure you don't have other versions of this script still running? What processes are accessing the controlfile? Is anything trying to copy it?

  • Forms 9i demos hangs up

    Greeteings,
    I've installed the Forms9i demos. The demos have automatically deployed as OC4J application successfully.
    When I'm trying to start any form it starts but hangs up and JInitiator trace log offers:
    Version: V1
    Subject: OU=Class 2 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Signature Algorithm: MD2withRSA, OID = 1.2.840.113549.1.1.2
    Key: com.sun.rsajca.JSA_RSAPublicKey@4a9a7d
    Validity: [From: Mon Jan 29 03:00:00 MSK 1996,
    To: Thu Jan 08 02:59:59 MSK 2004]
    Issuer: OU=Class 2 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    SerialNumber: [ ba5ac94c 053b92d6 a7b6df4e d053920d ]
    Algorithm: [MD2withRSA]
    Signature:
    Certificate has failed the verification with the Root CA certificates
    The cert "To" date is: "To: Thu Jan 08 02:59:59 MSK 2004"
    It seems the cert is expired. Is it the case of the hanging? I've downloaded the demos from
    http://www.oracle.com/technology/sample_code/products/forms/index9i.html
    Any suggestions, experts?
    Thanx.
    dannis.

    I'm sorry but there is no way ANYONE is going to be able to debug this for you.
    We need full error message, full version numbers, does it happen on a simple form? has it worked before? is this is new installation? Are you saying that you get the problem when you try to run the builder? What platform are you on?
    Regards
    Grant Ronald
    Forms Product Management

  • Trying to install iTunes 10.5 but wont install and it just seems to hang for several hours and do nothing.  Need help cos otherwise I cant update to iOS5 on my Iphone 4.  Thx

    I have tried many times today to install iTunes 10.5 in order to update to iOS5 on my Iphone 4 however it just wont work.  I have a MacBook Pro and when I use the software update it says that I have already downloaded iTunes 10.5 but when I go to install it and it says it is writing the files and the bluw bar is working its way across the page and then becomes very very slow and and at the last millimetre it seems to just hang there and do nothing.  I even left if like this for several hours and nothing progressed.  I have since tried to update via the iTunes program and the same problem happens.  Any and all help would be greatly appreciated.

    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • Firefox seems to hang when gmail is open. I must use task manager to exit. Frequency of hangs is increasing. Now typed characters don't always appear first time I type them. Other programs seem unaffected. Problem is getting progressively worse. Help?

    I only noticed today that Firefox works fine until I open gmail, so I'm not 100% sure of that. I usually work with gmail open, so it's hard to separate the two. Problems started before Christmas. Firefox would hang occasionally (every few days). Keyboard worked fine. Then Firefox started to hang once a day or so. Now it hangs several times a day. Every now and then, it crashes (especially if left unattended, the brat), but apparently I never sent a crash report. ( I couldn't get it to crash today -- it would rather hang. Fatal either way.) A week ago, I completely removed Firefox to the best of my ability and reloaded, hoping that would fix any hidden out-of-date or cookie issues. No joy. Keyboard issue started yesterday, so now Firefox is useless. Please save me from having to use Explorer!
    P.S. I have Vista.
    P.S.S. Oh, google calendar wouldn't load in Firefox, just now - said it's "redirected", and then Firefox crashed. Crash id is below. I did the about:crashes thing and Firefox could not find the report! (Oh Noes!)
    This sounds like malware to me, not that I know anything at all. I have current McAffee and it did not detect anything.
    Problems started around the same time that I got a new canon pixma MG8120 printer, which loaded a plugin apparently. Might be a coincidence.
    If you tell me to remove any plugins, tell me how. I think I tried that and couldn't find a way. Or maybe that was something else...

    New information and answers to the questions:
    1) I've never used dropbox on this machine, so that isn't the case
    2) I use Firefox as my browser and don't touch Safari unless it is a site that Firefox balks at. I did all the hardware scans, software scans, resetting prefs, and PRAM as well, almost every day.
    New info: I had to do a complete system format and reinstall. It actually seems to have solved the problem and corrected a few things that the recent updates hadn't resolved (the disk sound on sleep-wake didn't work until I installed the update on a new system install). I think the issue had to do with either the recent Java or Airport updates and I haven't installed them this time due to that fear. What forced me to do a complete install was the computer wouldn't hold an internet connection *at all*, even when directly plugged into the router via ethernet. System time got messed up and keychain passwords got hosed too if they related to recent internet/network connections. I wish I had more info to share but that's it. Thanks for the suggestions. I am going to keep this open for now as I am interested in seeing if anything else could explain this issue.
    I opened a bug report at the Apple Dev. site (https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/110/wo/klAiofleLooe0 XCbERCOUM/5.79.28.0.9) as well.

  • IPhoto videos seem to hang iMovie for 10-15 minutes

    When I first launch iMovie and click into the iPhoto Videos in the Events Library the app hangs for around ten minutes. After that it seems to work normally. Non-iPhoto videos do not cause this problem. Any ideas?

    Moretown wrote:
    When I first launch iMovie and click into the iPhoto Videos in the Events Library the app hangs for around ten minutes. After that it seems to work normally.
    Moretown got a few questions, which may help others identify your issue.
    *SYSTEM CONFIGURATION:*
    _ Go to "System Profiler" and look at the "Hardware Overview: "
    1. Model Identifier?
    2. Processor Speed?
    3. Memory?
    *OS & APP VERSION:*
    4. What is your Mac OS Version and Build #?
    5. What Version and Build # of iMovie are you running?
    6. What Version and Build # of iPhoto are you running?
    CAMERA:
    7. What camera/s did you use to create your iPhoto videos? (Make / Model)?
    IPHOTO:
    8. What is the size of your _entire iPhoto Library_ ?
    9. How many videos in your iPhoto Library? *+(see steps below)+*
    10. What is the size of all your videos combined? *+(see steps below)+*
    +(Use the steps below for question #9 & #10)+
    _ Launch iPhoto
    _ Select "Photos" from the Library
    _ Go to "Edit > Find"
    _ Type "movie" in the Search field
    _ Click the "Information" button -- it looks like a blue ( i ) -- to show the info tab.
    +All the necessary information will be listed there.+

Maybe you are looking for

  • Can't replace pages...ideas?

    On Acrobat 8 ProfessionalI created a word doc, converted it to a pdf. I then turned it into a form and edited it in Live Cycle 7. Now, I cannot replace pages, the option is shadowed out in the menu. No security is turned on. Can you help with why?

  • Order05 Idoc mapping in SRM XML Structure

    Hello All, I need to map Idoc order05 from ERP system into SAP provided SRM XML Structure. Anyone has done this sort of mapping before. Let me know the details as XML has got some 4800 fields and Idoc has some 800 fields and SRM XML seems to be super

  • Single batch for a component in production order goods issue

    Hi, We have a requirement where during good issue to a production order through CO11 & MIGO, more than one batch of a particular component should not be issued i.e. only one batch for a component should be used for goods issue for a production order.

  • Could not install custom actions error

    heres the users info running windows 7 pro 32bit oem office standard 2013 visio 2013 adobe pro X CRM 2011 using exchange 2010 we the user click on a message in outlook left or right click the error Outlook is crashing giving this error: "could not in

  • Garmin connect mobile

    Hy, i use a Garmin GPS for ride and run, and i'm interested to used an app Garmin Connect Mobile. this one is available for IPhone and android, but i can't find it for BB. is it possible to developpe an app for this?? i use Bold 9790. thanks.