Format for certain columns in list view control

I have a list view control and I would like to format the alignment for certain columns. I heard that the only way you can do this is by formatting the cells in excel. I tried this with no success. Can someone please give me step by step instructions on how to achieve this. I am currently allowing Xcelsius to handle my formatting for money. Is it possible to have Xcelsius handle the money formatting and have excel handle the alignment formatting. I am open to whatever works at this point. Also I am using Xcelsius 2008 (Build Number 12,2,1,66).
Much Thx

Hi,
In list view control you can format the entire row only, not a certain column.
Go to property>Appearance>Text Tab>select Header>Format selected text->select the format.
For width change: Property> Layout Tab>check custom column width the click the icon and enter width in pixel.
Regards,
Senthil K

Similar Messages

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

Code example for virtual list view control

I'm writing a client (C++) application to access an LDAP directory (that supports virtual lists), and I'm trying to make use of the virtual list view control to "page" my results. However, I'm having trouble getting the code to work correctly. Can anyone provide a C++ code example?
Thanks in advance.

I think I've found my problem with writing this code.
Unless I'm mistaken, the Netscape SDK for C appears to be incomplete. After an LDAP search operation, I believe there should be a way to parse the virtual list response control for a context id. Then, I would return this context id to the directory server in subsequent Virtual List View controls (which I'd send via LDAP search calls). However, the concept of context id in VLV search controls doesn't appear to exist in the Netscape SDK for C.

Custom column in List view

Dear guru's,
I'd like to ask you if its possible to add custom column in list view. For example in tc. FBL1N I'd like to add a column with custom text (for example with value "1" for counting the sum of rows). Is it possible to do without creating custom program?
Thank you all.
Regards.
Michael.

Hi Michael,
It's not possible to add some extra text in standard out-put without modifying it or creating custom program.
For adding a column in your list view. I think this write statement will help you
WRITE 'You can overwrite the following line:'.
FORMAT INPUT ON INTENSIFIED OFF.
WRITE 'WRITE HERE'.
FORMAT INPUT OFF INTENSIFIED ON.

[HOWTO] Nautilus and mp3 metadata columns in list view (bitrate etc.)

Hidden deeply in the wikipages, I just added a small howto on adding music metadata columns to nautilus's list view:
http://wiki.archlinux.org/index.php/Gno … te_etc..29
It allows for Album, Artist, Track Title and Bitrate Columns in list view mode. A feature I was missing from Nautilus.
Credit to be found here:
http://ubuntuforums.org/showthread.php?t=878683
Posted here for all to enjoy.
Last edited by stefanwilkens (2009-07-09 13:00:43)

hello,
searching for the same thing.
what about using mutagen and python2-nautilus from
the official repositories?
can not run it succesful. any idea?
thanks
red

Is it possible to disable datatips in columncharts for certain columns?

Is it possible to disable datatips in columncharts for
certain columns?

Hello,
apologizes for the misunderstanding.
Regarding security, you might want to have a look at the forum and http://www.sdn.sap.com/irj/sdn/security.
Back to the original matter, I can tell that modifying or extending the SAP GUI functionality on communication protocol level is quite challenging. The protocol is not published and a binary protocol.
Depending what your intention is, you might want to have a look at [GuiXT|http://www.guixt.com/].
Another approach is to write your own controls for SAP GUI, see [How To Extend SAP GUI for Java with Your Own Java Bean |http://www.sdn.sap.com/irj/sdn/sap-gui?rid=/library/uuid/20e0536f-eaf4-2a10-319d-eb68f8e6cee3] on the [SAP GUI family page|http://www.sdn.sap.com/irj/sdn/sap-gui#section16].
Best regards
Rolf-Martin

How to create index for a column of a view

Hi,
I have created view for a table and then i am trying to create index for a column of that view. i am using the query "CREATE INDEX index_name ON view_name (col)". but Mysql is showing error like "view_name is not a base table".
How can i do that......

As mentioned this is a java forum not a mysql forum, but as I know the answer - you can't create an index directly on a view in mysql.

Hide row values for certain column in GRR2

Hi Experts,
Looking for some help in report painter. I need to hide row values for certain columns in report painter. The requirement is I have 5 columns in the report, the 5 th column is the sum of col 1 to 4 and in my row i have a formula setup to sum of values for each column, what i would like to do is for column 1 thru 4 i didnt want to display the total values in row total but i wanted to dispaly value for column 5 in row total. I have been trying my best with putting formula, but couldnt succeed.
Could somebody let me know is there an way to get this addressed.
Thanks in advance
Best Regards,
gj

How was it achieved ? Did you use sections for the columns for which rows needed to be hidden?
I have a smiliar issue of hiding certain rows for few columns.

Finding source database table/column name for a column in a view

Hi i need to be able to identify the original database table/column name for a column in a view.
e.g. say i have a view like this
create v1 as select a.name fname, b.name bname, c.name cname,......
from u1.names a, u2.names b. u3.names c
where .....
Now I want to find out that the database table/column name for the fname, bname and cname columns in the view v1, which in this instance is u1.name.name, u2.names.name, u3.names.name.
But i need to be able to do it for any view. Short of parsing the SQL is there an easy way of doing this?
Now obviusly I can't do this for virtual columns but I will know my column is not virtual as it has an index on it.

But i need to be able to do it for any view. Short of
parsing the SQL is there an easy way of doing this?No, parsing the SQL is the only way. Good luck it is not something I would want to attempt.

Display more columns in list view?

Is there any way to display more than the standard columns (filename, dates, size, &c.) in list view in the Finder? If it's possible to search for other attributes (author, EXIF info, &c.) using the find function, why can't this information also be displayed as list view columns?

Additonally, one could send bug reports and enhancement requests to Apple via its Bug Reporter system. Register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. If you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. You'll get a get a Bug/ER ID number; thus, starting a dialog directly with engineering.

How to Hide Size Column in List View

My default setting for the Finder is to have folders display in list view with the size column turned off. This works like a charm for every folder except the Applications folder which always displays a size column whenever the finder is re-launched (it's always scrolled to the bottom of the list too, which is weird). It wouldn't bother me if the size values were cached somehow and just updated quietly in the background but it takes quite a while to calculate each value and actually slows down the finder.
I've tried deleting finder preferences but to no avail.
Does anyone know what's going on here?
[The above was originally posted here [http://discussions.apple.com/thread.jspa?messageID=9524102#9524102] but I was asked to move along by a surly faced police officer]

OK. Problem fixed but unfortunately not completely solved.
Talking about permissions and administrator issues made me wonder, so I logged in using my admin account and seemed to be having exactly the same issue. I was unable to set a default permamantly for the Applications folder. Except that when I tried to set a default in another folder (Documents I think) and restarted the Finder the setting held for all directories. When I logged back in under my regular user account it also held.
I have finally eliminated that pesky size column -- for good! (Of course I may want it occasionally, but that's at my discretion). The window also maintains a correct scroll point, corresponding to where it was last positioned.
I wish I knew exactly what has happened. All I really know is that fiddling (as usual) has fixed it and that it probably has something to do with Administrator privileges.
Thanks again for your suggestions and especially for being a sounding board.
Josh

Modify columns in list view - add annotations

Hello! Does anyone know if we can add new columns to the list view of assets in the production window? My goal is to have a column that shows annotation information in the list view. Possible?
Thanks!

Yes, kind of. You can add (and subtract) columns to a list view by modifying the List (ASSETLISTVIEW) metadata group. You can add Annotations but I'm not sure what you'll see for a value given it is not a unicode value field. It might not be a ver useful field to have in list view.

Can Pages 4.3 maintain defined text formatting for at a given list level?

I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?

Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh

Page format for 132 column dimension in smartforms

hi guys
*In smartforms what is the pageformat for 132 column paper i.e 360 * 310 mm is there any standard pageformat provided by sap or have to create a new one ,,,how to create a new pageformat.*
Edited by: ahamed13 on Jun 6, 2010 8:44 PM

Ahmed,
create the new page format in SPAD tcode. Go to the device where u want to create the page format as per the requriement.
Regards..

Finder does not display icon for word / excel in list view

Hi,
I got a new macbook air, with Yosemite pre installed. I copied over all my files (from my old macbook using a USB drive) and next I installed MS office for mac.
For some reason Finder does not display the correct excel of word icon in list view (I set preview thumbnail to NO in view options), but it it displays the generic file icon.
It appears to be very random, as some files do display the icon and others do not. It also appears to have nothing to do with the doc/docx xls/xlsx variations.
Also some of my parallels icons do not display correctly in list view.
When I open a INFO panel, it does show the correct icon. Example below:
Any body know how to reset / fix this ?

Still got no solution...
There has to be some one that knows about this ..?
Any professionals reading this that can point in some direction for a solution?

Format for certain columns in list view control

Similar Messages

Maybe you are looking for