Format probelm about the downloaded txt file

I encounter a problem. after the 4.7 system upgrade to ECC6.0 ..(sandbox)
Our report can't download the correct txt file.
I wrote a test program.
REPORT ZTEST NO STANDARD PAGE HEADING.
write: / '123',
/ 'abc'.
I download from menu :system->list->save_>local file: not converted.
but when opening the txt file , it shows:
2008.09.09 test 1----
123abc
everything is in one line. and add the current date ..and '----
Help.. what's the problem?
Many thanks
Edited by: hand consultant on Sep 9, 2008 8:13 AM

Hi,
Ganesh Modhave,
It is strange problem. Because in the same computer, I downloaded the txt file from 4.6c system. And the result is OK.
So I guess some upgrade issue result in the problem..
I path the gui 710 to level 2.,,........ It's okey now ,thanks.

Similar Messages

I am having problems downloading files from the web. After a number of files are downloaded, the system become sluggish, and then hangs. I traced the problem to the download history file: downloads.sqlite.

After downloading a number of 1.0 MB files, the system became very sluggish, and I started to get lots of (Not Responding) messages when trying to download or just use Firefox for browsing. Using Performance Monitor, I observed that the Firefox executable was growing larger and larger - up to as large as 1.2 GB on a system with 2.0 GB memory. Page faults were off the chart.
Looking for a similar problem, I found one that discussed the downloads.sqlite file becoming corrupted. I first noticed that this file was over 600 MB in size, so I deleted it. I then downloaded additional files, and observed that the new downloads.sqlite file would increase in size by about 150% of the size of each file that was downloaded. Once it would get up to 500 MB in size, the system started slowing down again.
I don't know the purpose of this file, but it appears that it keeps a full copy of every file downloaded, which may be the function of a download history file, but it does not seem correct that the file should grow in size without limit, and thus impact the system.
I would also appear that the Firefox executable is trying to read the entire contents of this file each time a new file is downloaded, which does not seem right.
Temporary fix is to periodically delete the downloads.sqlite file when it gets too large and starts impacting performance.. Apparently it is smart enough to open a new file if the old one is not found. I am not sure what the correct behavior for this file should be. Apparently is does not re-initialize when a new Firefox session is initiated.
Please feel free to contact me if more information is desired. I'm not sure what details you might need to troubleshoot this type of problem.

Hi Katy, and a warm welcome to the forums!
What is the exact name of the file?
Is it aim.bin?
Which requires either Stuffit Expander, or the Unarchiver to deflate.
http://www.apple.com/downloads/macosx/systemdiskutilities/theunarchiver.html

DATA TRANSFER - How to get a SINGLE SPACE in downloaded txt file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Its there, I am talking abut this -
OPEN DATASET - linefeed
Syntax
... WITH { NATIVE
         | SMART
         | UNIX
         | WINDOWS } LINEFEED ... .
Alternatives:
1. ... WITH NATIVE LINEFEED
2. ... WITH SMART LINEFEED
3. ... WITH UNIX LINEFEED
4. ... WITH WINDOWS LINEFEED
Effect
: These additions determine which line end marker is used for text files or legacy text files. If these additions are used, the profile parameter abap/NTfmode is ignored. Simultaneous specification of the values "UNIX" or "NT" in the addition TYPE is not permitted.
If these additions are not used, the line end marker is determined as follows, depending on the operating system of the current application server:
The line end marker for Unix is "LF". Under Unix, OS390 and OS400, only "LF" is used for reading and writing.
The line end marker for MS Windows is "CRLF". Under MS Windows, however, the values of the profile parameter abap/NTfmode can also be used to set whether new files are handled according to Unix conventions or Windows conventions. If the profile parameter has the value "b", the Unix line end marker "LF" is used. If the profile parameter has the value "t" or is initial, the Windows line end marker "CRLF" is used. The setting using the profile parameter can be overridden with the addition TYPE and the value "UNIX" or "NT". If an existing file is opened without the addition TYPE, this is searched for the first line end marker ("LF" or "CRLF"), and this is used for the whole file. If no line end marker is found, the profile parameter is used. This applies particularly if an existing file is completely overwritten with FOR OUTPUT.
If an addition WITH NATIVE|SMART|UNIX|WINDOWS LINEFEED is used, this setting can be changed for the open file using the statement SET DATASET. If neither of the additions is used, the line end marker also cannot be changed using SET DATASET.
Notes
: Without the use of an addition WITH LINEFEED, the line end marker is dependent on diverse implicit factors such as the operating system of the application server, a profile parameter, and line end markings that are already used. For this reason, the explicit use of WITH LINEFEED is recommended, which renders the use of the addition TYPE for setting the line end marker obsolete.
The line end marker that is currently used can be determined for every open file using GET DATASET.
Alternative 1
... WITH NATIVE LINEFEED
Effect
: This addition defines the line end marker independently of the access type according to the operating system of the application server, i.e. "LF" for Unix OS390 or OS400, and "CRLF" for MS Windows.
The line end marker is interpreted according to the current codepage. If a code page is explicitly specified using the addition CODE PAGE, the characters of the line end marker must exist be available or be written in accordance with this code page.
Note
: The addition WITH NATIVE LINEFEED is intended for editing files on an application server that can also be accessed by other means. The addition receives the appropriate line end marker without the program needing to know the operating system.
Alternative 2
... WITH SMART LINEFEED
Effect
: This addition depends on the access type:
In files that are opened for reading using FOR INPUT, both "LF" and "CRLF are interpreted as a line end marker. When opening an EBCDIC file with the addition CODEPAGE, in addition to "LF", "CRLF", and the EBCDIC character strings, the corresponding ASCII character strings are also recognized. In addition, the EBCDIC character "NL" (line separator) is also interpreted as a line end marker.
In files opened for appending or changing with FOR APPENDING or FOR UPDATE, the program searches for a line end marker that is already used in the file. In this process, first the end of the file is identified. If no line end marker is found there, a certain number of characters at the beginning is analyzed. If a line end marker is found, this is used when writing to the file. This is also affected by the addition CODE PAGE. For example, ASCII line end markers are recognized and used in a file opened with EBCDIC, but not the other way round. If no line end marker is found or no search is possible (for example, if the file is opened with the addition FILTER), the line end marker is determined according to the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
In files opened for writing using FOR OUTPUT, the line end marker is determined according the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
Note
: The addition WITH SMART LINEFEED is intended for the generic editing of files in heterogeneous environments. The line end marker is recognized and set for different formats. The use of this addition is the best solution for most application cases.
Alternative 3
... WITH UNIX LINEFEED
Effect
: The line end marker is set to "LF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available or be written according to this code page.
Note
: The addition WITH UNIX LINEFEED is intended for editing Unix files in which the specific line end markers are to be retained, even if the operating system of the current application server is MS Windows.
Alternative 4
... WITH WINDOWS LINEFEED
Effect
: The line end marker is set to "CRLF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available and be written according to this code page.
Note
: The addition WITH WINDOWS LINEFEED is intended for use with MS Windows files in which the specific line end marker is to be retained, even if the operating system of the current application server is Unix, OS390 or OS400.

Best Practice regarding using and implementing the pref.txt file

Hi All,
I would like to start a post regarding what is Best Practice in using and implementing the pref.txt file. We have reached a stage where we are about to go live with Discoverer Viewer, and I am interested to know what others have encountered or done to with their pref.txt file and viewer look and feel..
Have any of you been able to add additional lines into the file, please share ;-)
Look forward to your replies.
Lance

Hi Lance
Wow, what a question and the simple answer is - it depends. It depends on whether you want to do the query predictor, whether you want to increase the timeouts for users and lists of values, whether you want to have the Plus available items and Selected items panes displayed by default, and so on.
Typically, most organizations go with the defaults with the exception that you might want to consider turning off the query predictor. That predictor is usually a pain in the neck and most companies turn it off, thus increasing query performance.
Do you have a copy of my Discoverer 10g Handbook? If so, take a look at pages 785 to 799 where I discuss in detail all of the preferences and their impact.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

In SAP Webdynpro using ABAP,how to colour the downloaded excel file?

Hi all Experts'
I have downloaded the data from the webdynpro application into an excel file in the presentation server using a custom button in a layout of a view in the webdynpro component.
Now the requirement is to colour the column heading names and the downloaded excel file should show the full column length.
Could anybody help me on this how to do this two things.
Thanks in advance.

Hi,
You can use this function GUI_EXEC.
Let say you want to use winzip to zip the file then what you should do like this:
use this command --> ' -min -a D:\WALCOTT.ZIP D:\MBARANG.TXT'
D:\MBARANG.TXT --> path to the file you want to Zip
D:\WALCOTT.ZIP --> result zip file
The command above is depends on the software you use to zip.
then
DATA: cmdguiexec(150).
cmdguiexec = cmd.
CALL FUNCTION 'GUI_EXEC'
EXPORTING
command = cmdguiexec.
Hope this help you.
Best Regards,
Victor.

How to remove the last blank line in the downloaded text file?

Hi All,
I am downloading the one internal table content using the GUI_DOWNLOAD to a text file(.txt). The cursor is in last position of the text file where there is no content. For example consider the below is downloaded txt file:
This is test file.
Downloaded from the internal table
using GUI_DOWNLOAD
| <----
In above the internal table content first three lines..
Once I press page down in the text file, the cursor goes below the third line..(i.e., next to the last line)
How to avoid that ?
Thanks in Advance,
Regards,
Raghu

I solved this problem with BIN mode.
See this code example
DATA: FILESIZE TYPE I.
CALL FUNCTION 'SCMS_TEXT_TO_BINARY'
IMPORTING
   OUTPUT_LENGTH         = filesize
TABLES
    TEXT_TAB              =   i_record
    BINARY_TAB            = i_Record
      filesize = filesize - 1. "TRUNCATED LAST LINE!!!
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE = filesize
      filename                = l_file
      filetype                = 'BIN'
     TRUNC_TRAILING_BLANKS = 'X'
     TRUNC_TRAILING_BLANKS_EOL = 'X'
     WRITE_LF_AFTER_LAST_LINE = ' '
   TABLES
      data_tab                = i_record
Hope this can help you.

Format records in the MTA msllog file ?

Hi, All.
Where i can read about format records in the MTA msglog file ??
I need this for parse this log-file.
Serg

Greate !
Thank your !
Serg
> Hi Serg.,
>
> You might find what you're looking for in "Details of GroupWise Message
> Log files", document ID = 10087320.
>
> Cheers,
>
> Andy
>
> Serg wrote:
>
>> Hi, All.
>> Where i can read about format records in the MTA msglog file ??
>
>> I need this for parse this log-file.
>
>> Serg

How to Open the FailedFilesLog.txt File (statement), and How to Increase the 100 File Limit (question)

It took us a while to figure this out, so I'm posting this in case it's helpful for someone out there. Plus, I have a question...
DPM gave the following error for one of our file servers:
Description: The replica of Volume D:\ on <servername> is inconsistent with the protected data source. Number of files skipped for synchronization due to errors has exceeded the maximum allowed limit of 100 files on this data
source (ID 32538 Details: Internal error code: 0x809909FE)
Recommended action: Review the failure errors for individual files from the log file
\\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0}\B1E9D373-2C03-464E-A472-99BC93DB1E2A\FailedFilesLog.txt and take appropriate action. If some files fail consistently, you can exclude the folders containing these files by modifying the protection group or
moving the files to another location.
So, how do you actually open the FailedFilesLog.txt file shown in this DPM alert? What is this path referring to? Well, this is the mount point for the protected server's replica volume on the DPM server, which is mounted under \Program
Files\Microsoft DPM\DPM\Volumes\Replica\servername\File System. Here you'll see the mount points for all of the server's protected volumes. However, if you try to open one of these mounted volumes
in Windows Explorer, you'll get Access Denied, even if you have administrator rights. (If someone knows of a way around this, please let me know). As a workaround, you can access this mounted volume in an elevated
command prompt. Steps:
Open an Administrator Command Prompt
Type mountvol <AnyAvailableDriveLetter>: \\?\Volume{VolumeGUID}
Example: mountvol m: \\?\Volume{8492c150-f195-11de-a186-001cc4ef89a0} Note that we're only using the first part of the path to the FailedFilesLog.txt
file given in the DPM alert, starting from \\? and ending after the
} character.
Next, type m: to change to the newly mounted m: drive.
Then type cd B1E9D373-2C03-464E-A472-99BC93DB1E2A This is actually a folder name so we're just going into this folder.
Finally type dir and you should see the FailedFilesLog.txt file. This file can be copied to another location where it's easier to use (i.e. in Windows Explorer).
Be sure to unmount this volume when you're done by typing mountvol m: /d in the command prompt. (Mountvol reference:
http://technet.microsoft.com/en-us/library/cc772586(WS.10).aspx.)
What a pain, eh? But at least by reviewing the FailedFilesLog.txt file you can determine which files or folders caused the sync to fail and thus take action accordingly.
Now, here's my question: Where is that registry key that lets me adjust the limit of 100 files that DPM allows to be skipped before it fails the replica? Hopefully someone out there will tell me. I know this can be done because Kapil Malhotra
said so in this post:
http://groups.google.com/group/microsoft.public.dataprotectionmanager/browse_thread/thread/a179fa30fb50c9b0/e9a348f2a9386063?lnk=raot.
Also, does anyone know what the internal error code 0x809909FE means in this alert? Knowing this my help us determine what caused these files to fail. Interestingly, in the FailedFilesLog.txt file, it gave a different error code next to each failed file:
0x80070002.
-Taylorbox

Thanks for responding, Fahd. So, just to be sure...
Do I add this registry key to the DPM server or to the protected servers (or both)?
In either case, the ContinueOnFailure key does not currently exist. So, I must create this key and the MaxFailedFiles DWORD value
manually, right?
Does the server in which I create this regkey have to be restarted for it to take affect?
Can the DPM alert for the 0x809909FE error event (for exceeding the limit of 100 failures) please be adjusted to provide a path to the FailedFilesLog.txt file
that actually works if you click on it?
Any ideas on why the 0x80070002 "File not found" error happened? The files on the server were simply created and then deleted. Why would such file activity lead to this error?
Thanks,
-Taylorbox

How to add a SPACE as suffix to the last field in the downloaded text file?

Hi Experts,
By using GUI_DOWNLOAD am saving the data(only 3 fields) in a text file on my desk top.
fine.
example current record1 : 010001 354.999 26.000
here, after 3rd field 26.000, immediately the cursor is jumping to next line in text file.
but, wanna a SINGLE SPACE after 26.000, say 26.000+space.
tried with CONCATENATE, OFFSETTING, but no use(may b am using incorrectly)
so, pls. suggect me, How to add a SPACE as suffix to the last field in the downloaded text file?
thanq

Sorry...Typo error...Too many in the last few days -:(
Wanted to say AFTER -:)
Do it like this...
FIELD1 TYPE XXX,
FIELD2 TYPE XXX,
FIELD3 TYPE XXX,
SPACE(1) TYPE C,
That way you should end with...
26.000+SPACE
Greetings,
Blag.

The Downloaded PDF file does not contain the Signature through BSP pages

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

Want to display a space after last field in the output txt file

hi
I want to display a space after last field in the output txt file which is generaed by my program on utility server the last field lengyt we have defined is four and in database it is of three characters and requirement is to disppaly the last fourth field as space in the output file w hich is not shown as the txt file automatically gets closed at the third place as it is the last field in the record and ind atabase records are of therss char only but user wants to display this fourth position in the notepad output file as space ( which is last field in the output file)
eg
name house street country
record output coming in file
ram   h3      street3 thn      now this thn which is last field the notepad get closed at thn only
i want to display one space in last field for the whole of output file
ie ram      h3   street3 thn(space)
    sham   h4 street4   sgp(space) so on......
we need to show this space in the output file as blank
regards
Arora

hi Atish
i am using
loop at gt_sagadr_outtab into wa_sagadr_outtab
move wa_sagadr_outtab-country to wa_sagadr_text+223(226).
endloop
in this last field ie country i need to display the last 226 as blank as only country key is two char in database so the last space is not shown
i am not unsing the fM as tolb by you
and afterwards
i am usning
Concatenate 'Sagadr_' sy-datum sy-uzeit '.dat' into gv_filename_sagadr.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT                        = SY-MANDT
    LOGICAL_FILENAME              = gc_lfile
    OPERATING_SYSTEM              = SY-OPSYS
    PARAMETER_1                   = gc_param1
    PARAMETER_2                   = gc_send
    PARAMETER_3                   = gv_filename_sagadr
USE_PRESENTATION_SERVER       = ' '
WITH_FILE_EXTENSION           = ' '
USE_BUFFER                    = ' '
ELEMINATE_BLANKS              = 'X'
IMPORTING
EMERGENCY_FLAG                =
FILE_FORMAT                   =
    FILE_NAME                     = gv_filepath_sagadr
EXCEPTIONS
FILE_NOT_FOUND                = 1
OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and lastly
open dataset gv_filepath_sagadr for output in text mode encoding default.
    if sy-subrc eq 0.
     loop at gt_sagadr_text into wa_sagadr_text.
     transfer wa_sagadr_text to gv_filepath_sagadr.
     endloop.
    endif.
   close dataset gv_filepath_sagadr.
    if sy-subrc = 0.
    message S002 with gv_filepath_sagadr. "Files & created on Application server
    endif.
SO NOT SURE WHERE TO USE THE CODE AND HOW

I bought Lightroom 3 and want to upgrade to Lightroom 5 for Windows 7. Is the upgrade free and how do I go about the download?

I bought Lightroom 3 and want to upgrade to Lightroom 5 for Windows 7. Is the upgrade free and how do I go about the download?

You have to pay for major version upgrades, like LR 3 to LR 5.
You can purchase the upgrade from Adobe for 79 US Dollars from Products, make sure you have your Lightroom 3 serial number available (and maybe cheaper from other sellers)

Automatically save logging in the "flashlog.txt" file

Is there a way to automatically save logging in the "flashlog.txt" file?

hi Atish
i am using
loop at gt_sagadr_outtab into wa_sagadr_outtab
move wa_sagadr_outtab-country to wa_sagadr_text+223(226).
endloop
in this last field ie country i need to display the last 226 as blank as only country key is two char in database so the last space is not shown
i am not unsing the fM as tolb by you
and afterwards
i am usning
Concatenate 'Sagadr_' sy-datum sy-uzeit '.dat' into gv_filename_sagadr.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT                        = SY-MANDT
    LOGICAL_FILENAME              = gc_lfile
    OPERATING_SYSTEM              = SY-OPSYS
    PARAMETER_1                   = gc_param1
    PARAMETER_2                   = gc_send
    PARAMETER_3                   = gv_filename_sagadr
USE_PRESENTATION_SERVER       = ' '
WITH_FILE_EXTENSION           = ' '
USE_BUFFER                    = ' '
ELEMINATE_BLANKS              = 'X'
IMPORTING
EMERGENCY_FLAG                =
FILE_FORMAT                   =
    FILE_NAME                     = gv_filepath_sagadr
EXCEPTIONS
FILE_NOT_FOUND                = 1
OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
and lastly
open dataset gv_filepath_sagadr for output in text mode encoding default.
    if sy-subrc eq 0.
     loop at gt_sagadr_text into wa_sagadr_text.
     transfer wa_sagadr_text to gv_filepath_sagadr.
     endloop.
    endif.
   close dataset gv_filepath_sagadr.
    if sy-subrc = 0.
    message S002 with gv_filepath_sagadr. "Files & created on Application server
    endif.
SO NOT SURE WHERE TO USE THE CODE AND HOW

FLOW_EXCEL_OUTPUT_R error in the downloaded csv file

Hello,
I'm trying to use the functionality of the FLOW_EXCEL_OUTPUT_R as follows:
href="f?p=&APP_ID.:14:&SESSION.:FLOW_EXCEL_OUTPUT_R&P_REGION_ID._en"
Where the computation for P_REGION_ID is:
SELECT region_id FROM apex_application_page_regions
WHERE application_id = :app_id
AND page_id = :app_page_id
AND region_name = 'CSV export'
In the downloaded CSV file i get the following:
- the first row: +<||div id="report_33994800669487811_catch">+
- the last 2 row: +<||pre>report error:+
ORA-06502: PL/SQL: numeric or value error: character to number conversion error<||/pre>
(|| - sign is so I can show the tags in the post)
The rest of the data is downloaded ok.
But still how can i get rid of these errors?
Thanks,
Adela

It seems that the problem was caused by the "_en" termination (FLOW_EXCEL_OUTPUT_R&P_REGION_ID.*_en*).
But is there any way to get rid of the <||div id="report_33994800669487811_catch"> <||/div> tags from the begining, respective the end of the CSV file ?
Thanks,
Adela

Im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

im facing problem while trying to update my iphone 4 from version 4.3.1 to iOS 5. While processing the downloaded 774mb file, it comes with the statement that the network connection timed out. why???

i have been dealing with this same issue, tried to turn off firewall and even turn of antivirud but still it gave me the same error.

Format probelm about the downloaded txt file

Similar Messages

Maybe you are looking for