FormBeanInfo classes not properly generating after entity/view changed

I'm adding columns to a view/entity. I deleted the view and entity then regenerated by selecting the view. The view and entity generated with the right columns and reasonable column names. The jave RowImpl classes generated with reasonable accessors for the new columns/attributes. However, I get an exception because reflection cannot find a method for the attribute.
Searching manually in the file system I found a {vew name}FormBeanInfo.java file that has definitions for the old view and its columns.
How do I force JDeveloper to do its job and regenerate these FormBeanInfo classes correctly? The source files don't seem to be available through the IDE to manually manipulate, either.

Okay...I actually found the {view name}Form.java and {view name}FormBeanInfo.java files in the view-controller project application sources. Anyone know if these are generated automatically? (The Form objects extend BC4JActionForm.) Or am I on my own?

Similar Messages

A connection attempt failed because the connected party did not properly respond after a period of time

Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
South Central and East regions:
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
On Azure, the same web service call can result in this error or will return a response successfully.
There doesn't appear to be any pattern as to why the same call would work one time but not another.
How can this be resolved again? Any feedback is appreciated. Thanks.

Hi,
Please have a look at this article:
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
it gives us several ways to solve this issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Name of Standard outbound Idoc generated after Business Partner change

Dear All,
I am looking for an standard outbound Idoc ehich generates after Business Partner Change/Save.
We are working on a customer requirement where we need to send Business Partner change data from ECC 6.0 system to their application through SAP PI 7.0.
The requirement is whenever we change a Business Partner (TCode - BP) in ECC 6.0 and save it,an IDoc should be triggered with changed data and this Idoc data will be propagated to SAP PI.
Can someone suggest the message type or basic type of standard outbound Idoc ehich generates after Business Partner Change and how we can trigger it.
Thanks
Honey
Edited by: Honey Gyanani on Jun 21, 2009 6:58 AM
Edited by: Honey Gyanani on Jun 21, 2009 7:05 AM

Dear Michal,
Thanks for all the details. At last the scenario worked and i am able to send the saved Business Partner data from ECC system to PI.
Can you please suggest what configuration needs to be done to send Customer data from ECC system to PI when we save/change any Customer in ECC system.
I have done ALE setting like SM59 (RFC destination), WE21 (Port creation), WE20 (Partner profile ), SALE (Logical system creation) and BD64 (Distribution channel with DEBMAS Idoc).
In transaction CRMC_BUT_CALL_FU, do I need to change any event.
Also please confirm if I can use outbound IDOC DEBMAS.
Best Regards
Honey

R12-oafm, forms and oacore not starting up after IP adress change

Heloo my friend;
I had problem while i changed my server IP...when i start adstrtall.sh script its end wiht :
adstrtal.sh: Exiting with status 3 and adoafmctl.sh: exiting with status 204 ...soo my login page doesnt come to explorer and it gives HTTP 404 page not found error
So here is the solution:
Cause
The OC4J lock files contains the IP adress, after the ip adress change the lock files includes the wrong Ip adress which caused the OJ4J to fail
Solution
1 - open a new shell and set your apps environment
2 - cd $ADMIN_SCRIPTS_HOME
3 - adopmnctl.sh stop
4 - check if it is really down: ps -ef grep grep opm
5 - delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
6 - adopmnctl.sh start
7 - check if the issue has been resolved: adapcctl.sh status
I hope its helpful
Helios

Helios,
Thanks for sharing this, but please note that sharing the contents of Metalink notes is illegal. Instead, point to the Note ID or give a hint.
Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

Inspection lot not getting generated after PurcGR

Hi,
Inspection lot not generated after doing GR for a purchase order. what could be the reasons?
for the first 2 puchase orders, Inspection lot was created. however, for the 3rd Purchase order of 100qty, i did GR for 50 qty only. after then for new purchase orders, the material status has become unrestricted and directly going to stock.
Inspection type 01 is mainted in material master
QM info record has been maintained.
please clarify

Hi Nagaraj,
Try the following.
1. Check the inspection set up in the Material Master record for inspection type 01 whether 'post to inspn stock' is selected. If not, select it.
2. Check in Customizing for 'QM in Procurement' in 'Define QM system' activity, 'certified QM system - skip' is marked(Actual QM system). If this indicator is selected no inspection lot is created even if there is an active inspection type. This is valid if you maintain a target QM system in QM view of Material Master (Purchase data).
3. Check in IMG set up :
Quality Inspection -> Inspection lot creation -> Inspection for goods movement - whether inspection lot origin 01 is specified for movement type 101 and also ensure that QM is active for this movement type.
Please revert after trying these options.
Regards,
Swati

Class Not Found Exception After Connecting From a JDeveloper

Hi,
I am following the tutorial on SOA and started to experience problems in deployments (all but the console, including em) after the connection to the remote weblogic (10.3.5) from JDeveloper. I would know if the connection modifies the WLS environment. Unfortunately I did not note the message before wiping the setup, but found many entries on Google referring to some ADF library. I followed the suggestion to apply the adf runtime to the WLS install but this not helped.
By the way, I would just understand if the remote connection from a JDeveloper adds some configuration which is then eventually not found in the target WLS.
Thanks
Fabio D'Alfonso
http://www.fabiodalfonso.com

Can you check the log files of soa_server1, which are located in the <domain-home>/servers/<server-name>/logs.
There are probably some occurences of class not found exceptions.
When you are using the node manager to start your environment you have to make sure that StartScriptEnabled is set
to true in the nodemanager.properties file (located in the directory: <wl-home>/common/nodemanager
In the section "Starting the SOA environment" here - http://middlewaremagic.com/weblogic/?p=6040
an example is presented

9.0.3 Preview - Class not found error after including jsp:useBean

Hi,
I got a Java.lang.NoClassDefFoundError while compiling a JSP Page, after including a simple web bean as follows:
<jsp:useBean id="catviews" scope="request" class="CategoryView" />
<jsp:setProperty name="catviews" property="*" />
somewhere within the HTML page...
<%= catviews.getCategory() %>
The JSP page without the bean compiles fine and the Javabean itself compiles without error. The bean class is where JDev automatically puts it (i.e in a sub-directory of the classes directory within the project) and JDev does not raise any error on that JSP Page before compiling.
The error seems to point to the first line of the page, to the directive of the JSP page:
<%@ contentType="text/html" ... %> which is apparently harmless. What can be wrong ?
Thanks for your reply.

'Class not found' means 'Class not found' , the class you are referencing is not in your project's classpath. You should make sure your project's classpath point to the location where this class is deployed to. This could be a directory or a .jar file. You should also include the package name as part fo the class.

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Salary statement not getting generated after Upgrade

Hi all,
We have recently Upgraded to NW 7.4 SP6 from 7.01 SP9 . we are using two standard ESS applications for HR i.e Leave Request and Salary statement.
Leave Request application is working fine but salary statement is not getting generated with an error message.
The ESS /MSS Components installed are as follows.
BP_ERP5***
1000.1.0.18.0.20100828050255
BP_ERP5COM
1000.1.0.19.0.20110829150538
BP_ERP5ESS
1000.1.41.11.0.20120402111759
BP_ERP5MSS
1000.1.51.7.0.20130923050751
SAPPCUI_GP
1000.633.0.1.0.20120427113021
SAP_ESS
1000.633.0.1.1.20120802180711
SAP_MSS
1000.630.0.1.0.20120427113023
while generating the salary statement we get the following error

Search OSS note for those cubes. This should be a known SAP issue. We too had similar issue (though i dont remember now which statistic cube it was) and got resolved after next upgrade.
Abhijit

Safari 7.02 does not save my preference or view changes

Safari 7.02 does not save my preference or view changes

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

After upgrading to OS 7.1.1 Maps no longer works correctly. It is constantly "locating" and does not do real time updating. Tried "Scout" map app it does the same thing. Do I have something not properly set up for viewing Maps the way I used top?

After upgrading my iphone 4s to 7.1.1 the Maps application does not work properly. It updates very slowly and is constantly "locating". Why is this happening after the upgrade? I also tried SCOUT App it is does the same thing. It seems like it is losing the GPS position. Is there a fix for this?

Any change after turning Airplane mode off and on and/or or after turning Location Services off and back on?
If not, any change after doing a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

PR,s not getting generated after MRP run

Dear All,
I'm running MRP through MD51 for WBS element where RM's are attached to WBS.
It is MTO scenario where no stocks of RM's are maintained. I have checked all relevant settings of Masters.
After running MRP through MD51, system is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
Please suggest & help.
Thanks in Advance.
Shaiz

Little confused on your statement
System is not proposing PR's for RM's but when i run the MRP for independent FG (MD02 & MD03) system is proposing PR's.
I would like to Know, whether the FG is attached with WBS or RM?

Thumbnails not properly generating in Organizer 9

I have a mac with the latest version of Snow Leopard. Since yesterday, when I upload photos to Organizer, the image thumbnails do not generate at a small thumbnail size. Each image has an hour glass on it but the thumbnails of the images do not generate. Thumbnails of images will only generate when I zoom into 1, 2, or 3 images in the oragnizer catalog window. When I want to zoom out to have more thumbnails appear in my catalog window, an hour glass appears again on each thumbnail. This problem only occurs with the images that I have uploaded or edited with PSE since yesterday. Does anybody know how I can fix this?
Thanks
Kevin

Hey,
Is thumbnail generation complete in your catalog? If thumbnail generation is incomplete, then you will see 'Generating thumbnail' text in status bar.
If thumbnail generation is complete then it may be possible that your thumbnail database got corrupted somehow. Please to re-build you thumbnail database.
For doing so, please navigate to your catalog folder (path of current catalog is mentioned in 'Help->system info->Current catalog'). You will find a file saying 'thumb.5.cache'. Please rename this file (say to thumbs.5.cache_old). Now launch Organizer and wait for thumbnail generation to complete. Once done, please let me know if you still face this issue.
~Andromeda

Rollover images not properly aligning in design view

Hello,
I am a self taught Web design teacher and I have seemed to run into an issue with roll-over images as links. I am teaching my students to use photoshop to create two images for rollover buttons. When the students insert the images, everything works fine except for the alignment on page. One link/button makes a new line on the page and forces everything to the right on screen. But when we preview it in a browser, it looks correct. I also don't know any JAVA coding other than what I should be looking at when we create the rollover links. Do you have any suggestions for me?
      (also if you find anything that is obsolete in my code, please let me know. Again, I am self taught with NO formal education in it)
dreamweaver
browser
if you need the coding of the page, here (edited to save reading time):
#wrapper {
          width: 960px;
          margin-right: auto;
          margin-left: auto;
          background-color: #5B1E1E;
          height: 780px;
          margin-top: 10px;
#wrapper2 {
          background-color: #CCCCCC;
          height: 835px;
          width: 1000px;
          margin-right: auto;
          margin-left: auto;
#wrapper #topnav #topnav1 {
          height: 40px;
          width: 940px;
          background-color: #5B1E1E;
          margin-right: auto;
          margin-left: auto;
          margin-top: 5px;
#wrapper #topnav #topnav1 #home {
          height: 40px;
          width: 152.5px;
          float: left;
#wrapper #topnav #topnav1 #home2 {
          float: left;
          height: 40px;
          width: 152.5px;
          margin-left: 5px;
#wrapper #topnav #topnav1 #home3 {
          float: left;
          height: 40px;
          width: 152.5px;
          margin-left: 5px;
#wrapper #topnav #topnav1 #home4 {
          float: left;
          height: 40px;
          width: 152.5px;
          margin-left: 5px;
#wrapper #topnav #topnav1 #home5 {
          float: left;
          height: 40px;
          width: 152.5px;
          margin-left: 5px;
#wrapper #topnav #topnav1 #home6 {
          float: left;
          height: 40px;
          width: 152.5px;
          margin-left: 5px;
-->
</style>
<script type="text/javascript">

</script>
</head>
<body onload="MM_preloadImages('tools_images/home_over.jpg','tools_images/bhs_over.jpg','tools_ images/mset_over.jpg','tools_images/TR_over.jpg','tools_images/video_over.jpg','tools_imag es/web_over.jpg')">
<div id="wrapper2"><span class="style1">.
</span>
<div id="wrapper">
<div id="banner">
    <div id="banner1"><img src="tools_images/banner.jpg" alt="banner" width="940" height="70" /></div>
</div>
<div id="topnav">
    <div id="topnav1">
      <div id="home"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','tools_images/home_over.jpg',1)"><img src="tools_images/home.jpg" alt="home" name="home" width="152" height="40" border="0" id="home7" /></a></div>
      <div id="home2"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image3','','tools_images/bhs_over.jpg',1)"><img src="tools_images/bhs.jpg" alt="bhs" name="Image3" width="152.5" height="40" border="0" id="Image3" /></a></div>
      <div id="home3"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image4','','tools_images/mset_over.jpg',1)"><img src="tools_images/mset.jpg" alt="mset" name="Image4" width="152" height="40" border="0" id="Image4" /></a></div>
      <div id="home4"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image5','','tools_images/TR_over.jpg',1)"><img src="tools_images/TR.jpg" alt="TR" name="Image5" width="152.5" height="40" border="0" id="Image5" /></a></div>
      <div id="home5"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image6','','tools_images/video_over.jpg',1)"><img src="tools_images/video.jpg" alt="video" name="Image6" width="152.5" height="40" border="0" id="Image6" /></a></div>
      <div id="home6"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image7','','tools_images/web_over.jpg',1)"><img src="tools_images/web.jpg" alt="web" name="Image7" width="152.5" height="40" border="0" id="Image7" /></a></div>
      <div id="blank"></div>
    </div>
</div>
</div>

Thanks Ken!
I know that, and me personally don't care. But its hard to get my students to grasp the concept of what you see is not always what you get.
Thank you for your response

FormBeanInfo classes not properly generating after entity/view changed

Similar Messages

Maybe you are looking for