Formluas DO NOT get reflected in Essbase Admin Services

Hi,
I recently created an outline in Hyperion planning 11.1.2.1. This included all the attributes and formulas. I validated the application and it gave no errors. The deployment is "in sync". Successful deployment was carried out with no errors.
However, when I checked the outline in EAS, none of the member formulas have been reflected. Simply, they DO NOT appear in EAS.
Any help on this issue would be greatly appreciated.
Also, do any changes made from EAS get reflected back on to planning?
Thanks

Hi,
I have just one plan. (Plan 1)
And Yes, some of the members have HSP_UDF under UDAs. However, i got a validation error on the members with HSP_UDF when i was deploying them. Therefore, I removed the HSP_UDF UDA from those members and successfully validated and deployed the application in Planning. But, when i checked in EAS, the members that I removed the HSP_UDF UDA showed "!Formula Error".
I referred another oracle forum regarding the error i got with regard to the HSP_UDF, and hence i added the HSP_UDF UDA to those members from EAS.
Does this UDA cause such problems?
Please let me know a work around.
Thanks

Similar Messages

Enhancement not getting reflected in Info Cube

Hello Friends,
I have made enhancement for getting additional data in the InfoCube 0SD_C03 fro data source 2LIS_13_VDITM .I have made changes in Communication Structure and transfer structure as well . But i am getting the required data in the psa and addition fields are not getting reflected in the infocube . Please suggest me a solution .
Regards
Nilesh Vakil

Hi,
You have to map the Rules in two Transformations. One for DataSourec to InfoSource and InfoSource to Cube.
Confirm that you entered all the infoobjects and those compound objects too into the cube, Don't forget to map compound objects in transformation rules. Activate every single object individually.
Did you create DTP for cube? In BI 7.0 for InfoPackage by default "psa only".
Aparna.

PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM

Hi experts
We have tried the below code to dispaly photo in webdynpro integrated with adobe forms
CALL FUNCTION 'HR_IMAGE_EXISTS'
    EXPORTING
      p_pernr                     = v_obj_id
*     P_TCLAS                     = 'A'
*     P_BEGDA                     = '18000101'
*     P_ENDDA                     = '99991231'
    IMPORTING
*     P_EXISTS                    =
      p_connect_info              = l_connect_info
    EXCEPTIONS
      error_connectiontable       = 1
      OTHERS                      = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_DOC_READ'
    EXPORTING
*     MANDT                       = SY-MANDT
      stor_cat                    = space
      crep_id                     = l_connect_info-archiv_id
      doc_id                      = l_connect_info-arc_doc_id
*     PHIO_ID                     =
*     SIGNATURE                   = 'X'
*     SECURITY                    = ' '
*     NO_CACHE                    = ' '
*     RAW_MODE                    = ' '
*   IMPORTING
*     FROM_CACHE                  =
*     CREA_TIME                   =
*     CREA_DATE                   =
*     CHNG_TIME                   =
*     CHNG_DATE                   =
*     STATUS                      =
*     DOC_PROT                    =
    TABLES
      access_info                 = lt_infos
*     CONTENT_TXT                 =
      content_bin                 = lt_image_bin
    EXCEPTIONS
      bad_storage_type            = 1
      bad_request                 = 2
      unauthorized                = 3
      comp_not_found              = 4
      not_found                   = 5
      forbidden                   = 6
      conflict                    = 7
      internal_server_error       = 8
      error_http                  = 9
      error_signature             = 10
      error_config                = 11
      error_format                = 12
      error_parameter             = 13
      error                       = 14
      OTHERS                      = 15.
CHECK sy-subrc = 0.
READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
    EXPORTING
      input_length = <fs_info>-comp_size
      first_line   = <fs_info>-first_line
      last_line    = <fs_info>-last_line
    IMPORTING
      buffer       = l_employee_photo_content
    TABLES
      binary_tab   = lt_image_bin
    EXCEPTIONS
      failed       = 1
      OTHERS       = 2.
but the photo is not getting reflected in the adobe forms .
and also i have tried the url method but it doesnt work .
please help me out .

First, have you set a breakpoint in this code and made sure that you are getting data into lt_image_bin? That would seem to be the first place to start.
Then the question is how are you trying to pass the image into the Adobe Form? Are you passing an XSTRING context attribute into the form interface? Have you marked that part of the interface as an image? Are you setting the MIME Type parameter of the form interface as well. You really haven't posted any details about what you are doing on the Adobe Form side.

Chnages in the Graph properties are not getting reflected in the Browser.

Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol Bade

Same here :´(
Thanks In Advance
Juan

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

TDS line items are not getting reflected in J1INCHLN

Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ                                                                         43,000.00
XYZ                                                                         46,000.00
Bank                                                                        96,329.00-
S/Tax Interim-In Cr                                                    5,160.00
S/Tax Interim-In Cr                                                   3,864.00
ST Interim E.C-In Cr                                                 103.00
ST Interim E.C-In Cr                                                 77.00
ST Inter H E.C-In Cr                                                 52.00
ST Inter H E.C-In Cr                                                 39.00
TDS Pble Contractors                                              966.00-
TDS Pble Contractors                                              1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIM

Hi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S

Reg: View changes not getting reflected

Hello All,
I made some view changes like field mapping for the Family Dependents view.
I Created the Activity and deployed using NWDI but the changes are not getting reflected.
Please assist me in resolving the issue.
What might have gone wrong? and how to solve the problem.
Thanks in advance for the time.
Regards,
Pramod

The issue is with the activities queued up in TCS Deployer.
Rerun the TCS deployer and the issue is solved.
Thanks,
Pramod

Methodology/Processes Not getting reflected while creating a role via BRM in GRC

Hello All,
The methodology I have created is not getting reflected while creating a new Single role.
I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
Please suggest.
Thanks
Regards,
Shruti

Methodology is updated when you press save after completing the first step.
can you please share screen shots of configuration and issue you are getting

Support message not getting reflected in Solution manager system

Hi,
In satellite system support message is getting created, message number"...." successfully created in service desk.
When i check in solution manager system in crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
What can be the possible problem.
Thanks & Regards,
Balaji.S

Hi Gurus,
Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
Thanks & Regards,
Balaji.S

New Value addition in Restricted List under Rules not getting reflected

Hi,
I have created a custom rule for a custom profile. In the rule i have configured a metadata named as Reviewer. Under restricted values of reviewer i have put in 2 values.
It is getting reflected properly in the profile check in form.
But now when i add a new value, it is not getting reflected. Is restart required to get that field populated with new value ?. I have already published the schema base and static files.
Please suggest.
Regards,
Boopathy P

In your metadata field definition, your field is defined as having an option list. Does the value you just added to the restricted list also exist in the overall list of values for the field?
For example, your list has values "a", "b", and "c". In your profile restricted list, you have "a" and "b". Now have you added "d" to the restricted list, which does not appear in the defined list for the metadata field?

Values in parallel flow are not getting reflected

Hi ,
I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
Please help me
Thanks
Sailendra

Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
This is going to take a knowledge of:
<li> Correlation - initiate and terminate methods
<li> Notification using logic from a screenflow and
<li> Message Wait activity with an Interrupt property
It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
args[] = clientCaseId
args[] = productId
Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
// this assumes your time interval in your due transition is called "myTimer" and you just
//   want to stop it
myTimer = null
action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
args as Any[Any]
args["clientCaseId"] = clientCase.clientCaseId
args["productId"] = clientCase.products.first.product.productId
send(Notification, processId : "/DepartmentApprovals",
                                        activityName : "WaitForEarlyReleaseCompletion",
                                        arguments : args,
                                        argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

External Users not able to login to Essbase Admin Services.

Hi,
We are facing strange problem in one of our Essbase 9x environments. In this environment, we installed Shared Services, Essbase Admin Services in one server and Essbase in another server.
We configured MSAD and provisioned some users. Now, these users are able to login to Essbase, Shared Services without any issues but not to EAS. Whats more strange is, Native users are not facing any issue while logging to EAS, Essbase. Just externally authenticated users are having this problem.
We checked the logs, but nothing to deduct from them. The EAS screen is just hanging as soon as credentials are entered. We did lot of troubleshooting and even Oracle Support is working
and is of the opinion that the issue is because we installed EAS Console on Virtual Machine which is out of their policy.
Any suggestions are welcome!!
Thanks,
PM

Guys,
I found something that may help or you may have seen this and rectified it already.
When i started the services in foreground, External users are able to login.
This is what i got in the cmd prompt.
INFO: Installing web application at context path /hbrlauncher from URL jar:file:
F:\Hyperion\AnalyticAdministrationServices\deployments\Tomcat\5.0.28\webapps\hbr
launcher.war!/
Jan 6, 2012 11:17:29 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-10080
Jan 6, 2012 11:17:29 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-10090
Jan 6, 2012 11:17:29 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 18952 ms
!!!Setting HBR appname to : HBR:XYZSERVER
2012-01-06 11:19:39,843 WARN http-10080-Processor23 com.hyperion.hbr.core.Access
ControlManagerServer - Error authenticating user in UserServerManager.
2012-01-06 11:19:39,843 WARN http-10080-Processor23 com.hyperion.hbr.core.UserMa
nagerServer - Error authenticating user in UserServerManager.
PM

I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Formluas DO NOT get reflected in Essbase Admin Services

Similar Messages

Maybe you are looking for