Forms 11.1.1.2.1 troubleshooting with debug or trace

Can DEBUG be configured for more info:
If I add &config=debug to the end of the forms URL.. then the formsapp-diagnostic.log basically shows the clients IP, HOSTNAME, and Java Version..
nothing really usefull.. Is it possible to configure what debug info is written..
How do I Fix TRACING:
in weblogic console, forms, user sessions.. if I click on enable trace.. then later disable trace.. then view the trace.. All I get is:
FRM-93240: Multiple Forms applications cannot share an HTTP session.

First, the FRM-93240 problem is a known issue that has been corrected in an upcoming patch. For current versions (11.1.1.7 and 11.1.2.1) a tempory patch is available. Contact Support and refer to Bug 16567961
The second part of the issue is that adding "DEBUG" to the url will only enable servlet diagnostics. In most cases, this is of little value unless you are trying to troubleshoot a networking issue or session handling issue, or maybe a performance issue. The tracing which is found in EM can provide granular diagnostic information about a running form. This is not the same as servlet debugging. Refer to the document for details.
http://docs.oracle.com/cd/E38115_01/doc.111210/e24477/tracing.htm

Similar Messages

HT3529 my iphone just stop connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i cant get a text going to my cell #. help

my iphone just stopped connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i dont receive any text going to my cell #. help

If i understand what you are saying then you are seeing the WiFi indicator after connecting but Apps are saying that they are not connected to the internet?
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be to restart your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

XML FORM - How to save read-only controls with a default value

Hello everybody,
I have a 3 xml forms, each one to create one type of news. I need to use 3 because each of this forms has their own controls. But the control which indicates the type of news (asociated with a KM Predefined Property) must be common in the 3 forms, in order to use it on searches.
The question is, how can I include in this forms a control:
- Visible for the user
- With a default value defined in the control properties (each form has a different value, corresponding with the type of news)
- Read-only mode
- The value showed in the control must be saved in the associated KM Predefined Property when the user clicks the Save button.
Anyone knows how to do this?
What control can I use?
I was thinking of trying with text boxes, but I don't find the way to make them unwritable (Read only mode).
It is posible using labels?
Thanks.
Kind regards

Hello Jose,
I know you responded with a question... I see it in the email, but I don't see it here! Very odd... but in response:
The first thing I do when I open the Edit.xsl file is do a 'find' for the name of the text field that I want to be read-only (in my test case, it's 'location'). Repeat the find until you see something like:
[code][/code]
Below there is where I put the new code. Mine looks like this:
[code]- <xsl:choose>
- <xsl:when test="location='' and ($editmode='create')">
- <xsl:choose>
- <xsl:when test="./xf:ValidationError/@tagname='location'">
- <input name="location" size="30" type="text" class="urEdfiTxtEnbl" id="field_1157467268006">
- <xsl:attribute name="tabindex">
- <xsl:choose>
<xsl:when test="$accessibilitymode='true'">21</xsl:when>
<xsl:otherwise>3792</xsl:otherwise>
</xsl:choose>
</xsl:attribute>
- <xsl:attribute name="value">
<xsl:value-of select="''" />
</xsl:attribute>
- <xsl:attribute name="readonly">true</xsl:attribute>
</input>
</xsl:when>
- <xsl:otherwise>
- <input name="location" size="30" type="text" tabindex="3792" class="urEdfTxtEnbl" id="field_1157467268006">
- <xsl:attribute name="value">
<xsl:value-of select="''" />
</xsl:attribute>
- <xsl:attribute name="readonly">true</xsl:attribute>
</input>
</xsl:otherwise>
</xsl:choose>[/code]
I put the <xsl:attribute name="readonly"> in both places (when test, and when not test). I'm not entirely sure if that's necessary, but that worked for me.
Hope this helps,
Fallon

Troubleshooting With Apple HDMI & Apple Digital AV Adapter

I am troubleshooting with the apple HDMI, I just bought the 'Apple Digital AV Adapter' and the 'Apple HDMI' but when plug the AV adapter into my iPad I get a blank screen on the tv. But I am getting sound from the iPad on the tv. Any thoughts?

AV connector with iPad 3 does not work with iOS 7. Tried with 3 adapters and 3 iPads and all had same problem. Although iPad does display on TV, the iPad touch screen does not respond to touch. Cannot unlock with adapter connected, and cannot run apps. Unresponsive touch screen is wiggy at best. When I unplug the adapter, the iPad functions normally.
Completely ruined my presentation today.

Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC

Hi,
When we try to post good movements in MFBF, the system gives the error message C+099 which says "Internal error in FORM/FUNCTION get_prkexx(saplckmo) in position 10 with RC".
We have been implemented the sap notes which are shown below:
0001096890
0001126497
0001164684
0001230454
However, it doesn't solve our problem.
Can you please help us to solve this problem?
Thanks&Regards,
Begü

Dear,
Just debug the program and check it.
Also pls check these NOTES,
414204, 933809, 390655
Regards,
R.Brahmankar

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store.

Can a form be built in Adobe Acrobat cs6 with out using Forms Cental

Can a form be built in Adobe Acrobat cs6 with out using Forms Cental
If so how?

This question is better answered at this link:
<http://forums.adobe.com/community/acrobat/forms?view=discussions>
Good luck.

With the 7.2 update, neither NHL or MLB recognize my location and are not allowing me to access content. Worked through troubleshooting with MLB for an hour with no resolution. They have elevated the issue. Is this an error in the 7.2 update?

After updating Apple TV to 7..2, neither NHL or MLB TV recognize my location and will not let me access content. They say I am in a blackout local market, but I am not. Troubleshooting with MLB was unable to resolve the issue and it has been elevated there. Any thoughts on how to resolve?

After updating Apple TV to 7..2, neither NHL or MLB TV recognize my location and will not let me access content. They say I am in a blackout local market, but I am not. Troubleshooting with MLB was unable to resolve the issue and it has been elevated there. Any thoughts on how to resolve?

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?

Hi, i am new to PDF forms & need to make drop down menu with pictures, how do i do that ?
some one suggested to use coding to achieve similar results, but i don't know where and how to use it, please help!

Sorry, images in drop downs are not supported by Formscentral.
Andrew

Can't send email using wifi. Spent 30 min troubleshooting with my email service provider who finally told me to contact Apple

Can't send email using wifi. Spent 30 min troubleshooting with my email service provider who finally told me to contact Apple.
It doesn't work when I can't get 3G, whether at home or overseas. Receives no problem, and 3G works fine when it's available.

Maybe it is a 3GS. Anyway, I get the error that the network is not responding, and to check my settings. My ISP is Uniserve (Canada) but I am trying to use Telus (at home, where there is no 3G in my neighbourhood) or whatever is available as I travel eg. US or Europe for outgoing mail when 3G is not available. My husband has no problem with his iphone 4 when he sends email the same way usinf wifi.

Forms.INS(72) No String value associated with this variable

When I try to distribute my application I need to make sure that
when my app installs it either adds or creates the environment
variable Forms60_Path. This can be done in the project
builder. When going through this one of the steps you have
ability to add new environment variables. So I add on one named
Forms60_Path with a value and contents of %PROD_HOME% and with
the append set to yes.
This now will give me either one or two errors when installing
the application. The first error is that because i am choosing
append set to yes it doesn't appear to be checking if the
variable is already there or not. What it does do is give me a
messages saying "A file not found while trying to translate
Forms60_Path from '$Oracle' would u like to retry, ignore or
process' I have choosen to process and the installer correctly
adds the registry entry. That is a good thing but i still
should not recieve an error when doing this it should check to
see if the Reg entry is there if not then create it, if it is
there then append to it. This only happens if you have append
set to yes and the environment variable does not exist in the
registry yet.
The second error is more concerning because it just cancels out
of the install all together. What it does no matter what under
any circurmstance after you have added an environment variable
in the delivery wizard is give u a message saying that
"Form_Name.INS(72) No String Value associated with this
variable" This error always comes up no matter what. After
looking throught the INS file I took out the line
"win32_register_map_variable(repl_var);" and I no longer
recieved that error. My question is why do I get this error and
what is the ramifications of taking this line out of the INS
file?
If no one else has had these problems I will be simply amazed!!!
Thanks,
Spencer Tabbert
null

Spencer,
I am also getting the error you got months ago. (The second one: FORM.ins(72): No string value associated with this variable.) Can you tell me how you were able
to fix it? I would appreciate it.
I am new to Project Builder and pretty
confused.
Thanks,
Monika

Performance Issues with Debugging even in Display Mode

Hi not certain if this would sit in Security, ABAP or Basis, but lets start here as it is security related.
S_DEVELOP with any activity on DEBUG on a production system is a concern, but what are the performance related issues when a super user has to go into debug in display only on a production system because of a really complex issue?
I've heard in the past of a scenario where system performance was impacted, and we have notes around the allocation of S_DEVELOP display DEBUG access to this point. (I've summarised these below)
The risk with debug is associated with the length of time that the actual debugging process is being performed.
u2022 Work processes are dedicated solely to the users for the duration of the debug. If these are being performed for a long time, these can cause issues with not enough work processes being available.
u2022 It can cause DB2 locks. If the debug session last awhile, DB2 locks are not released. This impacts the availability of tablespaces, thus, affecting various transactions running across the system.
Even with these concerns, security will often get asked for debug display access.
As security is about risk identification, assessment and then controlled access what do other organisations do?
Options (not exhaustive) are "No Debug ever" or "Debug display only via a fire fight or super user on a time limited basis".
We are currently in the "debug display only via fire fight" camp, but would like to canvas opinion on this.
As one of the concepts of security is Availability of data (and to an extent ensuring the systems are up and running) do the performance risks push the security function to the "No Debug Ever" stance.

If you need to debug in production, then 9 times out of 10 you need to do root-cause analysis: The developer is the problem.
Writing sloppy code and not testing properly should not be an excuse for debugging in production.
But of course, there are exceptions even when you do try to keep them to a minimum.
To add to Jurjen's comments, also note that the debugger only has a limited capability of doing a rollback. So you can quite easily and unintentionally create inconsistencies in the system - also in display mode - which is an integrity problem, and typically more critical than availability problems or even potential confidentiality concerns.
Cheers,
Julius
Edited by: Julius Bussche on May 15, 2009 10:50 AM

Problem with Debug mode and SLD

Using the config tool, we have turned the Debuggable flag to 'yes' and set the Debug mode to OFF. Now from the studio, when I enable debugging for the process, the server0 stops successfully and restarts successfully. However, during the restart, the SLD service errors out and does not get started. It encounters the following exception. I can verify the error in std_server0.out
With erred SLD service, when I try to deploy and run the webdynpro application from studio, the deploy fails with the same exception.
We tried all kinds of restart (of the engine\server instance), debuggable and debug mode setting permutations, but not successfull. (debug port is 50021)
We are having remote debug server setup (not local).
Does anybody have any suggestions???
The exception we get is:
Finished with warnings: development component 'CreateOrder'/'local'/'LOKAL'/'0.2007.11.26.14.33.54':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application local/CreateOrder and wait. Reason: Clusterwide execption: server ID 3775750:<Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Implied start failed for dependency :local/CreateOrder -> service:sld', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Implied start failed for dependency :local/CreateOrder -> service:sld (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)

Hi Michael,
one way is to enhance the server go.bat with debug parameters. Under c:\usr\sap\<SID>\j2ee\<INSTANCE>\cluster\server\go.bat define the following params
set DEBUG_PORT=5000
set DEBUG_PARAMS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=
and add both params to the java arguments (e.g. behind the -classpath): %DEBUG_PARAMS%%DEBUG_PORT%.
Regards,
Stefan

Trying, failing to build qt5 with debugging symbols

As per this article, I modified my PKGBUILD like so (-developer-build):
build() {
cd ${_pkgfqn}
export QTDIR="${srcdir}"/${_pkgfqn}
export LD_LIBRARY_PATH="${QTDIR}"/qtbase/lib:"${QTDIR}"/qttools/lib:"${LD_LIBRARY_PATH}"
export QT_PLUGIN_PATH="${QTDIR}"/qtbase/plugins
export PATH="${srcdir}/python2-path:$PATH"
[[ "${CARCH}" = "i686" ]] && SSE2="-no-sse2"
PYTHON=/usr/bin/python2 ./configure -confirm-license -opensource -developer-build \
Don't know if I put the option in the wrong place, though, or if that information is outdated for qt5 - but it's not building for me. Here's where makepkg stops:
ln -s libQt5Widgets.so.5.4.0 libQt5Widgets.so
ln -s libQt5Widgets.so.5.4.0 libQt5Widgets.so.5
ln -s libQt5Widgets.so.5.4.0 libQt5Widgets.so.5.4
rm -f ../../lib/libQt5Widgets.so.5.4.0
mv -f libQt5Widgets.so.5.4.0 ../../lib/
rm -f ../../lib/libQt5Widgets.so
rm -f ../../lib/libQt5Widgets.so.5
rm -f ../../lib/libQt5Widgets.so.5.4
mv -f libQt5Widgets.so ../../lib/
mv -f libQt5Widgets.so.5 ../../lib/
mv -f libQt5Widgets.so.5.4 ../../lib/
make[3]: Leaving directory '/home/chris/Software/qt5/src/qt-everywhere-opensource-src-5.4.0/qtbase/src/widgets'
make[2]: Leaving directory '/home/chris/Software/qt5/src/qt-everywhere-opensource-src-5.4.0/qtbase/src'
Makefile:45: recipe for target 'sub-src-make_first' failed
make[1]: *** [sub-src-make_first] Error 2
make[1]: Leaving directory '/home/chris/Software/qt5/src/qt-everywhere-opensource-src-5.4.0/qtbase'
Makefile:70: recipe for target 'module-qtbase-make_first' failed
make: *** [module-qtbase-make_first] Error 2
==> ERROR: A failure occurred in build().
Aborting...
Not sure what happened. How do I get more information?
I need qt5-base with debugging symbols so I can get helpful traces for plasma-desktop crashes. So I should also ask: is it possible to modify the PKGBUILD to just compile qt5-base (and perhaps qt5-webkit and qt5-webengine)? qt5 is huge...
EDIT: and yes I had qtwebkit uninstalled at the time
Last edited by YAOMTC (2015-01-03 06:12:49)

I hate it when the only result for a problem is an unanswered question...
Anyway, invoking make manually uncovers what is the problem - there's a bunch of errors similar to this:
../gui/text/qfontengine_ft.cpp:1146:39: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
for (int x = 0; x < slot->bitmap.width; x++) {
^
cc1plus: all warnings being treated as errors
So the -Werror is the culprit. Looking at the ./configure -help output it turns out that the -developer-build enables -Werror. But there's -no-warnings-are-errors. So yeah, passing -no-warnings-are-errors in addition to -developer-build should fix the compilation.
I have updated the wiki accordingly.
EDIT: the compilation gets a bit further, but it now fails because of tests.
EDIT2: it pays off to read configure rather than rely on some random suggestion from the wiki. There's a "-debug" option, which should just enable debugging. It hasn't finished compiling here yet, but it got a lot further than before.
Last edited by 6xx (2015-02-03 21:13:49)

Compiling with debug info

Hi!
I get a question about PL/SQl, How can I compile a Block PL/SQL with debug information, in SQL*Plus?
Thanks in Advance
- Pablo

From the symptoms you describe, it is possible that the shared library contains a bug, but it is more likely that the problem is in your code, passing bad data to the shared library.
The problem might be a compiler bug, but I think an error in your code is more likely.
For example, your code as written might have undefined behavior that works by accident when compiling without optimizing, but fails when the compiler improves the runtime code.
Some examples:
1. A classic MT programming error is failing to declare a variable volatile when it is shared by more than one thread. In each thread, the compiler assumes it can remember the value of the variable and not reload it between references.
2. "x = ++x + b;" Modifying a variable twice in an expression withtout sequence points has undefined behavior -- compiler optimization can affect the result.
3." foo(x, x+=3);" the order of evaluation of function arguments is unspecified, so the actual values passed to foo could depend on optimization.
With C++ 5.5, you get some warnings from system headers that you can't do anything about, which I suspect is why you have disabled some warnings. Unfortunately, you might be disabling warnings that you need to see. That is, some of the disabled warnings could point to invalid code that results in the program crash.
I suggest using w instead of w2 (to avoid uninteresting warnings), and fix your code to eliminate the warnings you get.
In the current compiler, C++ 5.7 in Sun Studio 10, we have made some adjustments to warnings to make w and w2 more useful. You should consider upgrading.You can get a 60-day free trial version here:
http://www.sun.com/software/products/studio/index.xml
Also get the current patches for it here:
http://developers.sun.com/prodtech/cc/downloads/patches/index.html

Forms 11.1.1.2.1 troubleshooting with debug or trace

Similar Messages

Maybe you are looking for