Formula across tables doesn't work??

How is possible to create a formula across tables in the same sheet?.
In numbers for OSX is very easy, point and click and add cells to the formula.
In numbers for icloud beta if I start the formula into a table and then I point and click in another table, I lose any reference! ...
What's wrong?
Thank you for your help

More details:
It happens also with regular tables.
The first TRUNCATE is done, but the successive ones doesn't have any effect.
Really strange

Similar Messages

Subnr. links (2) in tabel to the same address table doesn't work always

Post Author: Piet Blaauw
CA Forum: Data Connectivity and SQL
for english see below
subnr links (2) in tabel naar dezelfde naw tabel werkt niet altijd.
ik heb een rapport gecreerd waar uit dezelfde tabel 2 records worden gelinkt (1 is faktuur debiteur en 1 order debiteur) aan het NAW bestand. Ik heb de NAW tabel 1 keer gehangen aan de faktuur debiteur en daarna nog een keer apart gehangen aan de order debiteur. tabel naam is CONTACT en toen ik hem aan de andere deb. koppelde werd het automatisch CONTACT_1. Dit werkt allemaal prima en ik krijg netjes de informatie uit zowel CONTACT als CONTACT_1 maar het gaat fout als ik een formula field maak waarin vergelijk dat als de factuur deb (gekoppeld aan CONTACT) leeg is dat dan de order deb (gekoppeld aan CONTACT_1) genomen moet worden. Het rapport laat simpelweg niets zien.
Ik weet niet of bovenstaande duidelijk is maar ik hoop dat iemand weet wat er fout gaat.
bij voorbaat dank voor de hulp
Piet Blaauw
English
Subnr. links (2) in tabel to the same address table doesn't work always
I created a report wher from the same table 2 fields are linked (1 is invoice debtor and 1 is order debtor) to the Main Address table (CONTACT). I have linked the address table to the invoice debtor and once again to the order debtor. When linking this way you see in the DATABASE expert in links 2 times the CONTACT table. Once as CONTACT and once as CONTACT_1. Everything works fine and I receive the data for as well the invoice debtor as the order debtor (if filled in) but it goes wrong when I create a Formula Field where I ask that if the invoice debtor field (Linked to CONTACT) is empty to show order debtor (Linked to CONTACT_1. However then nothing will pops up while the formula is correct.
I hope above is clear and you can help me out

Post Author: Bandit07
CA Forum: Data Connectivity and SQL
In your formula are you checking for null values as well as if the field is empty?
B

Row banding on a ADF table doesn't work

Using EA19 and previuously EA17, the table works fine, but the row banding doesn't appear.
The used "skin" is oracle. Each row stays white.
The attributes I use are bandingInterval="1" banding="row".
Thanks in advance
Laurent

Hello,
I installed the demoADF context and banding works fine
on the table.jspx file.
Now I have to find whats wrong with my context, what can be context dependend ?
Best thanks
Laurent

Insert Record with Parent/Child Tables doesn't work with Oracle - unlike AC

Hi,
I just Migrated a MS Access 2010 Database to an Oracle 11g Backend with the SQL Developer Tool.
The Migration went fine, all the Tables and Views are migrated.
I'm working with MS Access as Frontend.
The application has some Datasheets with Subdatasheets with Parent/Child Relationship. (1-n Relationship)
After changing to Oracle, it's not possible, to Insert a new Record in a Subdatasheet I always get the following Error Message:
"The Microsoft Access database engine cannot find a record in the table 'xxxx' with key matching field(s) 'zzzzz'"
It used to work perfect with the MS Access Backend, do I need a trigger which first adds the child Record ?
Or what should I do?
Thank you

Hi Klaus,
Thanks for your answer. I still haven't solved my problem. The only way would be to use a singel 1:n Relationship, but in fact I need a n:m Relationship.
I tried the same scenario with a new Access Application, same result.
To clearify my problem.
Goal: Parent Form with Parent Records, Linked Child Form with Child Records in a Datasheet View => Insert of a NEW Child Record.
I have 3 Tables (table1 = Parent tabel, table2 = Child Table, table12 = n:m Tabel with PK and two FK)
The Recordsource of the Parent Form is Tabel1
The Recordsource of the Child Form is Table2 joined with Table12.
In my Old Access Project, Access Triggered the Insert and filled Table12 with the NEW PK of Table2.
It seems like Access can't do that anymore....
I'm pretty desperate and I'm sure it is just a litte thing to fix.....

MERGE using nested table doesn't work on Oracle 9i

Hi,
Oracle 9i Enterprise Edition Release 9.2.0.4.0 on Red hat Linux
SQL> create table PERSONS (
2    ID number(9)
3   ,SURNAME varchar2(50)
4   ,constraint PERSONS_PK primary key (ID)
5 );
Table created.
SQL> create or replace type T_NUMBER_ARRAY as table of number;
2 /
Type created.
SQL> create or replace procedure P_MRGTS2 (P_ID PERSONS.ID%type)
2 is
3    L_IDS T_NUMBER_ARRAY;
4 begin
5    L_IDS := T_NUMBER_ARRAY(P_ID);
6    merge into PERSONS P using (select * from table(L_IDS)) D on (
7      P.ID = D.COLUMN_VALUE
8    )
9    when matched then update
10      set SURNAME = 'Updated'
11    when not matched then
12      insert (
13        ID
14       ,SURNAME
15      )
16      values (
17        D.COLUMN_VALUE
18       ,'Inserted'
19      );
20 end;
21 /
Procedure created.
SQL> exec P_MRGTS2(1)
BEGIN P_MRGTS2(1,'Avi'); END;
ERROR at line 1:
ORA-22905: cannot access rows from a non-nested table item
ORA-06512: at "OPS$AABRAMI.P_MRGTS2", line 9
ORA-06512: at line 1However, the same code on Oracle 10g Release 10.2.0.1.0 on SUN Solaris 9 works.
Is there any way to make it work on Oracle 9i?
One way I found is the following:
procedure P_MRGTST (P_ID PERSONS.ID%type)
is
L_IDS T_NUMBER_ARRAY;
begin
L_IDS := T_NUMBER_ARRAY(P_ID);
forall I in L_IDS.first..L_IDS.last
    merge into PERSONS P using DUAL D on (
      P.ID = L_IDS(I)
    when matched then update
      set SURNAME = 'Updated'
    when not matched then
      insert (
        ID
       ,SURNAME
      values (
        L_IDS(I)
       ,'Inserted'
end;On Oracle 10g there is negligible difference in time taken to execute both procedures, as displayed in SQL*Plus when issuing:
set timing onIs there something that makes one of the procedures preferrable over the other?
Thanks,
Avi.

Is there any way to make it work on Oracle 9i?
michaels> select * from v$version
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE     9.2.0.8.0     Production
TNS for HPUX: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
michaels> create table persons (
    id number(9)
       ,surname varchar2(50)
          ,constraint persons_pk primary key (id)    )
Table created.
michaels> create or replace type t_number_array as table of number;
Type created.
michaels> create or replace procedure p_mrgts2 (p_id persons.id%type)
is
   l_ids   t_number_array;
begin
   l_ids := t_number_array (p_id);
   merge into persons p
      using (select * from table (cast (l_ids as t_number_array))) d
      on (p.id = d.column_value)
      when matched then
         update set surname = 'Updated'
      when not matched then
         insert (id, surname) values (d.column_value, 'Inserted');
end p_mrgts2;
Procedure created.
michaels> exec p_mrgts2(1)
PL/SQL procedure successfully completed.
michaels> select * from persons
        ID SURNAME
         1 Inserted
1 row selected.

Event Pooling Table doesn't work

I have created Event Pooling Table and registered it. When I insert correct name into field TABLENAME nothing happens - when I look at BI Administrator - Manage - Cache - the table still has entry in cache (and record is deleted from EPT table). When I insert incorrect name info field TABLENAME, I can see message in errorlog (The physical table misstat1_db::MIP:MV_E_HIMA in a cache polled row does not exist.) and I suppose that it is working. But cache not purged.
Can you someone tell me why?
Thx.

Hi,
Stale cache entries are purged automatically at the specified polling intervals. As your saying record has deleted, it means that polling has occured.
Are you sure that the cache entry you are looking at is the same table which has been modified?
If possible, not a solution just for debugging, try to create sample request in Answers and check whether it's been changing when the table get modified.
-Vency

Materialized view from prebuilt table doesn't work with spatial types?

Hello, I'm trying to build a materialized view of a table using the prebuilt option and a pre-built table.
Oracle gives me an ORA-32304 error, saying it can't do this with user-defined types. The original table has no user-defined types, but does use an sdo_geometry column. Is this what it's complaining about?
Now I can sort of understand this, but here's my real problem: the materialized view I'm creating is comprised of a subset of the columns from the original table, but not the geometry column. Is Oracle right in refusing my prebuilt request? Does anyone know of a way around this (besides creating the MV from scratch without prebuilt).
I've successfully created an MV on another table, which doesn't have a spatial column, using the prebuilt option and a subset of columns.
(I'm using Oracle 11.2.0.2.0 on both master and slave databases)

Good news, everyone! =)
SAPwebIDE team fixed this issue with MMD template in SAPwebIDE v1.10.2. available on http://hanatrial.ondemand.com.
This "Bug" or "Feature" was presented in 1.8.x and 1.9.x SAPwebIDE (i've used local installation) and now it's gone in v1.10.2. Thank you, SAPwebIDE Team! =)
The difference between versions of MMD template is only in one file (fixed one is on the right):
Master2.controller.js
And here it is:
Now, only one question remains: HOWTO:SAPUI5 Fiori-like report. (mix control's value as key into binding context)
Best regards, ilia.

"Print page" doesn't work as intended when using lengthy tables. (Brother MFC 6490CW, possibly others)

I had originally thought this was a printing driver problem, but further testing indicated that this was not a problem in Internet Explorer and it was a problem in Firefox.
When printing some web pages using Mozilla Firefox, particularly those having sizable tables which would extend beyond the length of a single printed page, the remainder of the table is not printed even though the remainder of the web page itself is printed. The behavior is also noted when using Print Preview. See, for example, this web page which I created: http://alltherightwaystowrite.blogspot.com/2013/08/the-basics-capitalization.html
I inquired of other bloggers to see if they were also experiencing this issue. See, for example, the discussion I began here: https://productforums.google.com/forum/#!msg/blogger/EpD6K2ezIZE/a5mPu8CV0HwJ
As you can see, the only response I received indicated it was not an issue for that person with a different printer. This leads me to believe the problem is with either the MFC6490CW printer (unlikely) or the MFC6490CW printer driver (more likely) or perhaps with Firefox, or some combination of those three. This problem is duplicatable by me on successive attempts to print with any web page with a table extending beyond the length of a single page of printed paper. The output error occurs whether printing in portrait or landscape mode.
Saving a web page as "Web Page Complete" and opening up the web page in Microsoft Word created a variety of formatting errors, but otherwise, the entire contents of the page would have printed. Of course, this is not an ideal solution in any event. The entire document should print seamlessly across multiple pages without losing any data or content in the process.
As indicated above, as an additional test, I attempted to print the same web page in Internet Explorer and did not note the output errors described here. The web page printed correctly under those conditions. As a result, I believe that the most likely culprit is Firefox since Internet Explorer was also a good test case for my printer and printer driver, and it passed that test case.

https://bugzilla.mozilla.org/show_bug.cgi?id=521204 - this is a META Bug which is tracking all the Bugs which are related to '''Wrong page splitting / Missing page content when printing''' - 34 different Bugs, 14 of which are marked as solved.
IMO, that page would be better served with a print css script ''(as jscher2000 mentioned earlier)'' to make that a "printer ready" page, if wanting that page to be "printable" is your intention. As it now is that page is shrunk by about 50% with the "Shrink to Fit" feature engaged. Look at that page in Print Preview when the Scale is set to 100% instead of Shrink to Fit, and see that the page is so large that it shows that about 1/2 the width. Then decrease the zoom level in Print Preview to 50 or 60% to get that page to fit horizontally with the "Shrink to Fit" feature disabled. Looks like a case of "garbage in - garbage out".
I think the css used for that page uses too large a font which ''(IMO)'' forces Firefox to shrink the font too much to make that page fit to a letter size sheet of paper. And relying first upon the Print to Fit feature in the four different major browser engines ''(Gecko, Trident, WebKit, and Presto)'' and then the hundreds of print drivers out there is just looking for failures such as you are seeing; it works for some viewers and doesn't work for other viewers. What appears on the '''"screen"''' doesn't always translate to the '''"printed page'''" too well without proper instructions via style sheets, especially since "screens" are oriented horizontally and most "printed" pages are vertically oriented unless the user shifts to the Portrait view.
http://www.w3.org/TR/CSS2/media.html#media-types <br />
http://www.w3.org/TR/CSS2/page.html

Hover table row style doesn't work in IE

I found a great way to create a rollover effect when you
hover over a table row, by giving the row a class of "resultsRow"
and using the following rules in my stylesheet:
.resultsRow {
background-color: #EAEEB1;
.resultsRow:hover {
background-color: #D2DE56;
This works perfectly in Firefox, but doesn't work at all in
Internet Explorer, which is what most of our audience will be
using. Does anyone know a fix for this in Internet Explorer?

On Thu, 20 Jul 2006 08:21:43 +0000 (UTC), "Claire S"
<[email protected]> wrote:
> .resultsRow {
> background-color: #EAEEB1;
> }
> .resultsRow:hover {
> background-color: #D2DE56;
> }
>
> This works perfectly in Firefox, but doesn't work at all
in Internet Explorer,
>which is what most of our audience will be using. Does
anyone know a fix for
>this in Internet Explorer?
As you've seen, IE is ancient and doesn't support it. You can
do it
pretty easily with JavaScript:
<style type="text/css">
.resultsRow {
background-color: #EAEEB1;
.resultsHover {
background-color: #D2DE56;
</style>
<tr class="resultsRow"
onMouseOver="this.className='resultsHover'"
onMouseOut="this.className='resultsRow'">
Gary

InDesign CS6 Font doesn't work in table cells

Hi all!
I'm working in InDesign CS6 on Mac OS 10.6 Leopard. I have character and paragraph styles defined using a certain font, and they work just fine except when using them in table cells. I have the character style nested in the paragraph style, which is then used in the cell style. But it doesn't work. It inherits everything correctly except for the font. If I select the text, the font menu tells me it is the correct font, but it displays in a different font. I've tried exporting to IDML and resaving, but that didn't work. I'm stumped

Hi Jeffrey-
Indeed it should, and I see why using a formatted table would cause conflicts, but I am importing it as an unformatted table already. Built all styles in InDesign first, then imported as unformatted table. A few times it did work as expected, but most of the time it steadfastly refused to apply the correct font.
But in any case, that wasn't my only issue with the tables. My understanding of importing Excel spreadsheets is that applied table and cell styles will be maintained when the linked file is updated, but local formatting/overrides will be wiped out, which is why I was trying to get the styles working in the first place. However, after testing, I found that even when I didn't use local formatting/overrides, updating the linked file still broke my InDesign layout.
In my test, the only thing I did to the imported (unformatted) table was to apply the table/cell styles and adjust column width (which is unavoidable as far as I know - didn't see anywhere I could set column width as part of a style). But even then an update to the linked file removed all the styles and column widths I had set (and was also highly annoying as it gave me a separate error message about the formatting loss for each and every instance of the spreadsheet).
Could be a fluke, or could be I'm missing something, but for whatever reason, I just couldn't get it to work

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work.

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work (only seems to go back one level). I also have so many headings I won't be able to type them in manually!

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

Table SelectionListener doesn't work

Hi,
the main property of table:
RowSelection--Single
Value--binding a CollectionModel Variable of it's backingBean
SelectionListener--a method in it's backingBean, an print the table's selectedRowKeys in this method.
The display of table is right.
The result of print is [null] when I select a row for the first time.
The method doesn't work when I select a row later.
Thanks
jirui

why don't you post some code and also what version are you using?

Table delete button doesn't work with Virtual Forms

I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
getTableRowGroup1().getSelectedRowsCount()==0
and getTableRowGroup1().getSelectedRowKeys().length==0.
I tried almost everything with the forms... I don't know what I missed...

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Table's Properties "row color"[standard;alternating;trans.] doesn't work?

Table's Properties "row color"[standard;alternating;transparent] doesn't work?
Upgraded VC to 7.01 with sp1, the table's grid color not change with the row color set.
But set the nested iview to show on the layer,the "row color" worked.
But Why? why doesn't work in the primary iview.

Hi
Once this happened to me also. I deleted the table & created whole thing again & it worked.
Just try to create whole thing again atleast that table. it may work.
Regards
Sandeep

I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work

Hi,
I want to use the SQL query IF EXIST to update or insert data in a ms access table, but it doesn´t work
(fault number -2147217900)
I want to search for a value in a ms access table , if it exist i want to update it, if not i want to insert a new row.
Working with LabView 7.1, database con. toolset.
Who can HELP?
Thanks a lot
Marco

Hello,
I think that If exist is not a standar SQL command (I know it exists I think in Oracle and SQL server), MS access doesn't support it, so I think the best way to do it is first make a Select and then either an Update or an insert, sorry...
Paulo

Formula across tables doesn't work??

Similar Messages

Maybe you are looking for