Forte form editor wont work, missing *.form file

Hi,
I have a .java GUI file (subclass of a subclass of JDialog) that was generated with Forte, but the .form file that the form editor needs wasnt checked into CVS. So now I cant open the form editor in Forte (sun one). Is there a way to auto generate a new one based on the *.java code?
Thanks,
Chris
ps. I know this isnt a forte board, I coudlnt find the forte board.
pps. Sorry if this has been asked before, I searched for the answer and couldnt find one...
ppps. I tried a blank file, and I tried a minimal XML document, neither worked (the *.form file is XML).

Thanks for the suggestion!
I searched their list, and found this post:
Essentially it is currently impossible, and the GUI must be recreated. dote!
http://www.netbeans.org/servlets/ReadMsg?msgId=87985&listName=nbusers
Richard,
currently it is not possible to generate .form file from java code - because
form editor is not "two-way" (that is why .form XML files are used to store
GUI information). However two-way editing is planned for the future - see
our proposal:
http://www.netbeans.org/www-nbusers/msg03322.html.
There was also a related discussion some time before (about "reverse
endineering"):
http://www.netbeans.org/www-nbusers/msg01590.html.
As for converting forms from old NetBeans X2: direct serialization was used
for saving forms sooner, which is not suitable for longer persistence -
because e.g. serialized Swing components might not be compatible between JDK
versions. (That's why we moved to more general XML storing time ago.) So -
to import older forms you should use at least the same JDK version you used
with old X2. I would also recommend you to import it using Forte 2.0, which
could be more "polite" to old form formats (is a bit older than NetBeans
3.1). Once you save form to XML .form file, you can use it in newest JDK and
NetBeans.
Hope this somehow helps,
Tomas Pavek
-----Original Message-----
From: Uschold, Richard J. [mailto:[email protected]]
Sent: Tuesday, January 30, 2001 5:22 PM
To: '[email protected]'
Subject: [nbusers] Converting a *.java file to a *.form or *.xml
Is there a way to start with a *.java file and convert / generate a *.form
file? (for NetBeans X2 2.1) Or maybe convert / generate a *.xml project
file for NetBeans 3.1?
I had a project in NetBeans X2 2.1 last year and I lost everything except
the *.java file.
Thanks
Rick Uschold

Similar Messages

MAC OSX 10.6.8 photoshop editor wont work

newly purchased photoshop elements cd, MAC 10.6.8, installed ok, editor will work, but organizer wont, its like iphoto wont "release the photos" in a format that photoshop can understand?

newly purchased photoshop elements cd, MAC 10.6.8,
Which version of Elements did you buy exactly?
The latest version PSE12 requires OS X 10.7 or higher.
http://www.adobe.com/products/photoshop-elements/tech-specs.html

Pse 7.0 trying to change image size to post to net?? editor wont work !!!

please help !!! i have 7.0 only had the temp version 6.0 i really liked it!! now i cant figure out the 7.0 !! editor wont come up nothing!! can go into organizer but nothing else...

Its strange... I can think of such problem with CD/DVDs ..
But it should not happen with HDDs at least because its a reliable media for data storage...
Can you try one thing... Try repiar before backup and see if it makes any difference..

Calculate wont work after saving file

I enter the script in the simplified field area, it tests fine, then I save and exit. Open the file and the script wont run. If I delete the script and enter it again it will work until I save and exit.
I am using Acrobat Pro 8.1.1
Windows xp sp2

I have the exact same problem, Ken. However, if I just save the PDF, then there is no problem, but if I choose to save it as another file or if I copy the PDF to another location (be it on my hard drive or an external one), then the script won't work. Opening the properties of the form elements, I see that the same script is there, but it won't work if I don't "refresh" the code by first cutting it, closing the scripting area, opening the scripting area and then pasting the code again. Disturbing, since I have a lot of form fields with code...

Adobe photo shop element 12 photo editor wont work

@Hi I opened my adobe photo shop elements 12 and my photo editor isn't working... Can someone please help me...

Hi MegJT,
Sorry for the trouble.
If you are working on Windows
Please follow these steps:
Try to rename SLCache to Slcache.old in the following location
C:\Program Files (x86)\Common Files\Adobe
and
SLStore to Slstore.old
C:\ProgramData\Adobe\SLStore
and Right Click on the Photoshop Elements 12 icon and run as administrator.
Let us know if this works.
Regards,
Sandeep

[SOLVED] trying to change cursor theme and gconf-editor wont work

i am trying to change my cursor theme in my arch setup with gnome i have put the cursor theme in /usr/share/icons/ and now i am trying to use gconf-editor to change the theme but when i start gconf-editor it doesnt give me the option of desktop in the sidebar under / it only gives me the options of apps and schemas i have been very impressed with you guys so far please could you tell me how to fix this or another way of changing my cursor theme
Thanks
icyfox101
Last edited by icyfox101 (2013-05-29 09:31:09)

Doesnt matter have fixed it myself

Mail-form from dB Masters + reCaptcha - Things wont work the way i want.

I used a mail-form from dB Masters because someone here gave me the tip.
And its great! But it uses a simplefied Captcha script.
I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php
If you try to send mail it wont work.....
form.php
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Email Form</title>
</head>
<body>
<center>
<form id="form" method="post" action="../formmailer.php" enctype="multipart/form-data">
<input type="hidden" name="action" value="verify">
<table cellpadding="4">
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Uw naam:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Naam" value=""/>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Email:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Email" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Telefoonnummer:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Telefoonnummer" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Onderwerp:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<select name="Onderwerp">
    <option value="0">Algemene Informatie</option>
    <option value="1">Offerte</option>
    <option value="2">Overige</option>
    </select>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Bericht:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<textarea name="Bericht" rows="7" cols="40"></textarea>
</td></tr>
<tr><td align=right>CAPTCHA TXT</td>
<td align="left">
<form method="post" action="verify.php">
   <?php
     require_once('recaptchalib.php');
     $publickey = "I hide the key on this forum dont know if its ok to show";
     echo recaptcha_get_html($publickey);
   ?>
</form>
</td>
</tr>
<tr><td></td><td align="left">
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="Reset" value="Clear Form" />
<input type="hidden" name="config" value="0" />
<input type="hidden" name="nospam" value="" />
</td></tr>
</table>
<div style="height:1px; display: none; visibility: hidden;">
<input type="text" name="email">
</div>
</form>
</center>
</body>
</html>
formmailer.php
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
     $check_referrer="no";
     $referring_domains="www.wientjesvoegwerk.nl";
// options to use if hidden field "config" has a value of 0
// recipient info
     $charset[0]="UTF-8";
     $tomail[0]="[email protected]";
     $cc_tomail[0]="";
     $bcc_tomail[0]="";
// Mail contents config
     $subject[0]="Onderwerp van de Email";
     $reply_to_field[0]="Email";
     $reply_to_name[0]="Naam";
     $required_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
     $required_email_fields[0]="Email";
     $attachment_fields[0]="";
     $return_ip[0]="yes";
     $mail_intro[0]="Er is een bericht gestuurd vanuit Wientjesvoegwerk.nl:";
     $mail_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
     $mail_type[0]="text";
     $mail_priority[0]="1";
     $allow_html[0]="no";
// Send back to sender config
     $send_copy[0]="yes";
     $copy_format[0]="vert_table";
     $copy_fields[0]="Naam,Onderwerp,Bericht";
     $copy_attachment_fields[0]="";
     $copy_subject[0]="Kopie van uw bericht naar Wientjesvoegwerk.nl";
     $copy_intro[0]="Dank u voor uw bericht!<br />Om veiligheidsredenen is uw email adres en telefoonnummer niet in deze mail te zien.<br /> Het volgende is verstuurd;";
     $copy_from[0]="[email protected]";
     $copy_tomail_field[0]="Email";
// Result options
     $header[0]="";
     $footer[0]="";
     $error_page[0]="";
     $thanks_page[0]="";
// Default Error and Success Page Variables
     $error_page_title[0]="Errors:";
     $error_page_text[0]="Ga a.u.b. terug naar de vorige pagina om alle benodigde velden in te vullen.";
     $thanks_page_title[0]="Bericht verzonden.";
     $thanks_page_text[0]="Dank u voor uw bericht!";
// Antispam Options
     $empty_field[0]="nospam";
     $character_scan[0]="Bericht,Naam,Email,Telefoonnummer,Onderwerp";
     $time_delay[0]="2";
     $captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
     $max_urls[0]="2";
     $max_url_fields[0]="Bericht";
     $flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
     $charset[1]="";
     $tomail[1]="";
     $cc_tomail[1]="";
     $bcc_tomail[1]="";
// Mail contents config
     $subject[1]="";
     $reply_to_field[1]="";
     $reply_to_name[1]="";
     $required_fields[1]="";
     $required_email_fields[1]="";
     $attachment_fields[1]="";
     $return_ip[1]="";
     $mail_intro[1]="";
     $mail_fields[1]="";
     $mail_type[1]="";
     $mail_priority[1]="";
     $allow_html[1]="";
// Send back to sender config
     $send_copy[1]="";
     $copy_format[1]="";
     $copy_fields[1]="";
     $copy_attachment_fields[1]="";
     $copy_subject[1]="";
     $copy_intro[1]="";
     $copy_from[1]="";
     $copy_tomail_field[1]="";
// Result options
     $header[1]="";
     $footer[1]="";
     $error_page[1]="";
     $thanks_page[1]="";
// Default Error and Success Page Variables
     $error_page_title[1]="";
     $error_page_text[1]="";
     $thanks_page_title[1]="";
     $thanks_page_text[1]="";
// Antispam Options
     $empty_field[1]="bait";
     $character_scan[1]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
     $time_delay[1]="";
     $captcha_codes[1]="";
     $max_urls[1]="";
     $max_url_fields[1]="";
     $flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a-z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
     include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
     function getIP()
          if(getenv(HTTP_X_FORWARDED_FOR))
               $user_ip=getenv("HTTP_X_FORWARDED_FOR");
          else
               $user_ip=getenv("REMOTE_ADDR");
          return $user_ip;
// get value of given key
     function parseArray($key)
          $arrayvalue=$_POST[$key];
          $count=1;
          extract($array_value);
          foreach($array_value as $part_value)
               if($count > 1){$value.=", ";}
               $value.=$part_value;
               $count=$count+1;
          return $value;
// stripslashes and autolink url's
     function parseValue($value)
          $value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
          return $value;
// html header if used
     function htmlHeader()
          $htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
          return $htmlHeader;
// html footer if used
     function htmlFooter()
          $htmlFooter="</table>\n</body>\n</html>\n";
          return $htmlFooter;
// build verticle table format
     function buildVertTable($fields, $intro, $to, $send_ip)
          $message=htmlHeader();
          if($intro != "")
               $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
          $fields_check=preg_split('/,/',$fields);
          $run=sizeof($fields_check);
          for($i=0;$i<$run;$i++)
               $cur_key=$fields_check[$i];
               $curvalue=$_POST[$cur_key];
               if(is_array($cur_value))
                    $curvalue=parseArray($cur_key);
               $curvalue=parseValue($cur_value);
               if($allow_html[$config]=="no")
                    $curvalue=htmlspecialchars(nl2br($cur_value));
               else
                    $curvalue=nl2br($cur_value);
               $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
          if($send_ip=="yes" && $to=="recipient")
               $user_ip=getIP();
               $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
          $message.=htmlFooter();
          return $message;
// build horizontal table format
     function buildHorzTable($fields, $intro, $to, $send_ip)
          $message=htmlHeader();
          $fields_check=preg_split('/,/',$fields);
          $run=sizeof($fields_check);
          if($intro != "")
               $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
          $message.="<tr>\n";
          for($i=0;$i<$run;$i++)
               $cur_key=$fields_check[$i];
               $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
          if($send_ip=="yes" && $to=="recipient")
               $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
          $message.="</tr>\n";
          $message.="<tr>\n";
          for($i=0;$i<$run;$i++)
               $cur_key=$fields_check[$i];
               $curvalue=$_POST[$cur_key];
               if(is_array($cur_value))
                    $curvalue=parseArray($cur_key);
               $curvalue=parseValue($cur_value);
               if($allow_html[$config]=="no")
                    $curvalue=htmlspecialchars(nl2br($cur_value));
               else
                    $curvalue=nl2br($cur_value);
               $message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
          $message.="</tr>\n";
          $message.="<tr>\n";
          if($send_ip=="yes" && $to=="recipient")
               $user_ip=getIP();
               $message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
          $message.="</tr>\n";
          $message.=htmlFooter();
          return $message;
// build plain text format
     function buildTextTable($fields, $intro, $to, $send_ip)
          $message="";
          if($intro != "")
               $message.=$intro."\n\n";
          $fields_check=preg_split('/,/',$fields);
          $run=sizeof($fields_check);
          for($i=0;$i<$run;$i++)
               $cur_key=$fields_check[$i];
               $curvalue=$_POST[$cur_key];
               if(is_array($cur_value))
                    $curvalue=parseArray($cur_key);
               $curvalue=parseValue($cur_value);
               if($allow_html[$config]=="no")
                    $curvalue=htmlspecialchars($cur_value);
               else
                    $curvalue=$cur_value;
               $message.="".$cur_key.": ".$cur_value."\n";
          if($send_ip=="yes" && $to=="recipient")
               $user_ip=getIP();
               $message.="Sender IP: ".$user_ip."\n";
          return $message;
// get the proper build fonction
     function buildTable($format, $fields, $intro, $to, $send_ip)
          if($format=="vert_table")
               $message=buildVertTable($fields, $intro, $to, $send_ip);
          else if($format=="horz_table")
               $message=buildHorzTable($fields, $intro, $to, $send_ip);
          else
               $message=buildTextTable($fields, $intro, $to, $send_ip);
          return $message;
// referrer checking security option
     function checkReferer()
          if($check_referrer=="yes")
               $ref_check=preg_split('/,/',$referring_domains);
               $ref_run=sizeof($ref_check);
               $referer=$_SERVER['HTTP_REFERER'];
               $domain_chk="no";
               for($i=0;$i<$ref_run;$i++)
                    $cur_domain=$ref_check[$i];
                    if(stristr($referer,$cur_domain)){$domain_chk="yes";}
          else
               $domain_chk="yes";
          return $domain_chk;
// checking required fields and email fields
     function checkFields($text_fields, $email_fields, $regex)
           $error_message="";
          if($debug==1)
               $error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
          if($text_fields != "")
               $req_check=preg_split('/,/',$text_fields);
               $req_run=sizeof($req_check);
               for($i=0;$i<$req_run;$i++)
                    $cur_field_name=$req_check[$i];
                    $cur_field=$_POST[$cur_field_name];
                    if($cur_field=="")
                         $error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
          if($email_fields != "")
               $email_check=preg_split('/,/',$email_fields);
               $email_run=sizeof($email_check);
               for($i=0;$i<$email_run;$i++)
                    $cur_email_name=$email_check[$i];
                    $cur_email=$_POST[$cur_email_name];
                    if($cur_email=="" || !eregi($regex, $cur_email))
                         $error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
          return $error_message;
// attachment function
     function getAttachments($attachment_fields, $message, $content_type, $border)
          $att_message="This is a multi-part message in MIME format.\r\n";
          $att_message.="--{$border}\r\n";
          $att_message.=$content_type."\r\n";
          $att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
          $att_message.=$message."\r\n\r\n";
          $att_check=preg_split('/,/',$attachment_fields);
          $att_run=sizeof($att_check);
          for($i=0;$i<$att_run;$i++)
               $fileatt=$_FILES[$att_check[$i]]['tmp_name'];
               $fileatt_name=$_FILES[$att_check[$i]]['name'];
               $fileatt_type=$_FILES[$att_check[$i]]['type'];
               if (is_uploaded_file($fileatt))
                    $file=fopen($fileatt,'rb');
                    $data=fread($file,filesize($fileatt));
                    fclose($file);
                    $data=chunk_split(base64_encode($data));
                    $att_message.="--{$border}\n";
                    $att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
                    $att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
                    $att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
          $att_message.="--{$border}--\n";
          return $att_message;
// function to set content type
     function contentType($charset, $format)
          if($format=="vert_table")
               $content_type="Content-type: text/html; charset=".$charset."\r\n";
          else if($format=="horz_table")
               $content_type="Content-type: text/html; charset=".$charset."\r\n";
          else
               $content_type="Content-type: text/plain; charset=".$charset."\r\n";
          return $content_type;
// end global functions //
// begin procedural scripting //
     // anti-spam empty field check
     if($_POST[$empty_field[$config]] != "")
          $empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
     // anti-spam character scan check
     if(strlen($character_scan[$config]) > 0)
          $spam_message="";
          $field_check=preg_split('/,/',$character_scan[$config]);
          $field_run=sizeof($field_check);
          for($i=0;$i<$field_run;$i++)
               $cur_field_name=$field_check[$i];
               $cur_field=$_POST[$cur_field_name];
               if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
                    $spam_message.="<li>This message contains disallowed characters.</li>\n";
     // anti-spam time delay check
     if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
          if((time() - $_POST["time"]) < $time_delay[$config])
               $time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
     // anti-spam CAPTCHA check
     if(strlen($captcha_codes[$config]) > 0)
          $captcha_check=preg_split('/,/',$captcha_codes[$config]);
          if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
               $captcha_message = "<li>CAPTCHA test did not match.</li>\n";
     // anti-spam max URL check
     if(strlen($max_url_fields[$config]) > 0)
          $max_url_message="";
          $field_check=preg_split('/,/',$max_url_fields[$config]);
          $field_run=sizeof($field_check);
          for($i=0;$i<$field_run;$i++)
               $cur_field_name=$field_check[$i];
               $cur_field=$_POST[$cur_field_name];
               preg_match_all("/http:/", $cur_field, $matches);
               if(count($matches[0]) > $max_urls[$config])
                    $max_url_message.="<li>This message contains too many URL's.</li>\n";
     // set anti-spam flagging option
     if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
          $set_flag = 2;
     else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
          $set_flag = 1;
     else
          $set_flag = 0;
     // header injection check
        $security_filter="";
     if(strlen($_POST[$reply_to_field[$config]]) > 0)
          if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
               $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
          else
               $reply_to_field_checked=$_POST[$reply_to_field[$config]];
     if(strlen($_POST[$reply_to_name[$config]]) > 0)
          if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
               $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
          else
               $reply_to_name_checked=$_POST[$reply_to_name[$config]];
     // check domain referrer and continue
     $domain_chk=checkReferer();
     if($domain_chk=="yes")
          $error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
          if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
               // build appropriate message format for recipient
               $content_type=contentType($charset[$config], $mail_type[$config]);
               $message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
               // build header data for recipient message
               //$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
               $extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
               if($cc_tomail[$config]!="")
                    $extra.="Cc: ".$cc_tomail[$config]."\r\n";
               if($bcc_tomail[$config]!="")
                    $extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
               if($mail_priority[$config]!="")
                    $extra.="X-Priority: ".$mail_priority[$config]."\r\n";
               // get attachments if necessary
               if($attachment_fields[$config]!="")
                    $semi_rand=md5(time());
                    $border="==Multipart_Boundary_x{$semi_rand}x";
                    $extra.="MIME-Version: 1.0\r\n";
                    $extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
                    $message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
               else
                    $extra.="MIME-Version: 1.0\r\n".$content_type;
               // send recipient email
               if($debug==1)
                    if($set_flag == 1)
                         $debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
                    else
                         $debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
               else if($debug==0)
                    if($set_flag == 1)
                         $subject = $flag_spam[$config]." ".$subject[$config];
                    else
                         $subject = $subject[$config];
                    mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
               // autoresponse email if necessary
               if($send_copy[$config]=="yes")
                    // build appropriate message format for autoresponse
                    $content_type=contentType($charset[$config], $copy_format[$config]);
                    $message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
                    // build header data for autoresponse
                    $copy_tomail=$_POST[$copy_tomail_field[$config]];
                    $copy_extra="From: ".$copy_from[$config]."\r\n";
                    // get autoresponse attachments if necessary
                    if($copy_attachment_fields[$config]!="")
                         $semi_rand=md5(time());
                         $border="==Multipart_Boundary_x{$semi_rand}x";
                         $copy_extra.="MIME-Version: 1.0\r\n";
                         $copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
                         $message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
                    else
                         $copy_extra.="MIME-Version: 1.0\r\n".$content_type;
                    // send autoresponse email
                    if($debug==1)
                         if($set_flag == 1)
                              $debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
                         else
                              $debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
                    else if($debug==0)
                         $send_copy = 1;
                         if($copy_tomail=="" || !eregi($regex,$copy_tomail))
                              $send_copy = 0;
                         if($send_copy == 1)
                              if($set_flag == 1)
                                   $copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
                              else
                                   $copy_subject = $copy_subject[$config];
                              mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
               // showing thanks pages from a successful submission
               if($thanks_page[$config]=="")
                    echo "<h3>".$thanks_page_title[$config]."</h3>\n";
                    echo "<p>".$thanks_page_text[$config]."</p>\n";
                    if(strlen($debug_text) > 0)
                         echo "<p><b><i>".$debug_text."</i></b></p>\n";
               else
                    header("Location: ".$thanks_page[$config]);
          else
               // entering error page options from missing required fields
               if($error_page[$config]=="")
                    echo "<h3>".$error_page_title[$config]."</h3>\n";
                    echo "<ul>\n";
                    echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_message.$max_url_message;
                    echo "</ul>\n";
                    echo "<p>".$error_page_text[$config]."</p>\n";
               else
                    header("Location: ".$error_page[$config]);
     else
          echo "<h3>".$error_page_title[$config]."</h3>\n";
          // message if unauthorized domain trigger from referer checking option
          echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
     echo "<h3>Error</h3>";
     echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
     include($footer[$config]);
ob_end_flush();
?>
verify.php
<?php
require_once('recaptchalib.php');
$privatekey = "i hide this on the forum";
$resp = recaptcha_check_answer ($privatekey,
                               $_SERVER["REMOTE_ADDR"],
                               $_POST["recaptcha_challenge_field"],
                               $_POST["recaptcha_response_field"]);
if (!$resp->is_valid) {
   // What happens when the CAPTCHA was entered incorrectly
   die ("The reCAPTCHA wasn't entered correctly. Go back and try it again." .
        "(reCAPTCHA said: " . $resp->error . ")");
} else {
   // Your code here to handle a successful verification
?>
We have a saying in the Netherlands; "Not being abled to see the tree's trough the forest"
Well i dont see it anymore...
I managed to get it in the code but it doesnt work.
I hope someone can help me out!

@Nancy O.
Thanks for your support i appreciate it that you helped me out a many times.
However i have read all of the topics you posted.
I know in the mail form i can disable the "sort of Captcha". I wanted to disable it and insert reCaptcha instead.
I will re-make the form because like you said (and i already figured it out myself) ;
"b) Don't modify forms until you get a very basic form working on your server."
And youre right, im taking too much work at once.
@CowboyInAZ
Im a hobbyist that learns really really fast.
Before March 23 i never used CSS, Javascript and XHTML. And never combined them all together with PHP. (never ever created a php based file from scratch)
The reason why i use other persons code is because i learn faster with examples, and because i dont need to reinvent the wheel if someone already invented it. The only thing i do with it is learn the workings, customise it and at last, rewrite the code when i understand it.
If you look at my current site: http://www.wientjesvoegwerk.nl/
You will notice that the site is validated by W3C with no errors and warnings.
I think it was Nancy O. that gave me the link to the validator. Thats how i discovered the service.
You need to know that in 1 day (from 63 errors and 12 warnings) i removed all errors. And i didnt knew much about it, and why errors happend while the site looks fine.
So im just curious how things work and thats why i "steal" codes and adjust them to learn myself.
I also want a education like you spoke of, but im interested in a different media.
I want to be abled to create my dream project wich involves new ways for game studios to earn money.
This is just a simple start, im also taking tutorials in C#, C++.

Fillable form that i can fill in but the submit button wont work

i have adobe pdf reader that will open a fillable form allow me to fill in the details but the submit button wont work the lap top has windows 8 on my other laptop with windows vista i can fill in and submit the same form help needed please

also adobe reader touch wont submit either

Error report form iTunes Store: Missing Nib File

After having uploaded the .zip-file to the iTunes Store (update of an existing app), I got the following error-report from the iTunes store: Missing Nib File - The referenced nib file "MainWindow.nib" was not found in the application bundle. Is it possible that this error occurred while creating the app in the Adobe app builder or where do I have to look for this error? The first uploading of the original app worked without an error. What do you recommend me?
Thank you very much for an answer.
Ueli Mattenberger, VMA Media AG, Switzerland

See http://forums.adobe.com/thread/1277293 and http://status.adobedps.com/ for information on this issue.
Neil

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

AIR give you classes to detect an on-line or off-line status, it's in
this way for the sake of flexibility for instance what happens if you
only what to sync data only on Saturdays at 2 am? If it were done
automatically that'll be a problem. And it isn't so complicated.
You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
it's an application that does everything you have in mind.
I don't understand your question abou file types.
An AIR app can communicate with almost every backend served tech
CF, .Net, PHP, RoR.
Sincerely,
Michael
El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
>
I have to say that I'm loving the picture! well cool!
>
Sorry but I don't quiet understand. I thought AIR did the updating
automatically? I didn't realise the developer had to program the
logic of how the updates take place? Is it a case in most AIR apps
that when online the app updates the server and once every intervel
(of however long) the local SQLite DB is synced to the more updated
server DB. Then when offline the developer has to sense that the app
is offline and store a log manually of the updates without any help
from AIR itself, and then update once it comes online again?
>
Can AIR link to anything more than a database on the server side
apart from webservices, for example .as files or any other file types?
>
What type of server is a Flex app stored on, is it a specific Adobe
server rather than a Java or .NET server?
>
Thank you so much for your last comment!
IrishAIRMax
>

FRM-30087: Unable to create form file

I'm running Forms 9i. When I tried to run form from the Forms Builder, I sometimes received the error "FRM-30087: Unable to create form file". To work around the problem, I have to shut down the OC4J instance and then restart again. Why did I receive this error? How do I get rid of this error without having to shut down OC4J every time?

It means that there is an instance of your fmx in memory still running. Make sure to exit properly from your form after you run it.
This might happen if you leave the forms running or if you closed your browser without exiting the form first.
Shutting down OC4J removes the fmx from memory.

Infopath form file checked out by user id given in connection file authentication section instead of the current user logged in

Hi ,
I am migrating infopath form from SP2007 to SP2013 my infopath form contains the checkout(on page load) - Checkin(on submit click) using webservices. I converted the
Checkout data connection to convert to connection file. In the udcx file i used authentication section. Checkout and checkin is working but the file is getting checked out to the user id specified in the authentication
section instead of the logged in user. I am
using web browser form, Sharepoint 2013 on premise authentication: kerberos
Authentication section in my udcx file
<udc:Authentication>
<udc:UseExplicit CredentialType="NTLM">
<udc:UserId>domain\userid</udc:UserId>
<udc:Password>Password</udc:Password>
</udc:UseExplicit>
<udc:SSO AppId="" CredentialType=""/>
</udc:Authentication>

Hi,
This is a quick note that we are performing research on this issue, however, I noticed that you are using Kerberos authentication method, however, you use NTLM in CredentialType attribute.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

I am unable to open any form. Any form/file I open states "not responding" This is adobe reader.

I am unable to open any form. Any form/file I open states "not responding" This is adobe reader.

Online and downloaded to my computer. There is no difference.
browser is google but I also tried internet exployer...thats not the problem...your program is
i just downloaded the most recent version..10.1...or whatever it is.
i found this online:...how do I find the Adobe Readers X's 3d and multimedia settings...what tab do I click on..
1) khwajakhurram I have tried your suggestion to uncheck the default "Enable hardware rendering for legacy video cards" setting and it seems to work!
What is surprising is that Adobe Reader X's 3D & Multimedia settings report that the alternative preferred renderer modes are either software or DirectX9 .....on a Vista machine with DirectX11.
The video card on this machine is definitely not legacy but a recent quality Nvidia produced card. That is also the case on the other machines with the issue I have reported.
2) http://kb2.adobe.com/cps/860/cpsid_86063.html mentions that "certain configurations of anti-virus software that have not yet white-listed AcroRd32.exe" are "Unsupported configurations for Reader running in Protected Mode". Therefore I have also excluded AcroRd32.exe from virus scanning.
I am now able to use both Protected Mode and Advanced Security without issue.
I will experiment with various versions of this in the next few days and see whether both or just one of these remedies are needed.
Update: I have found that performance is vastly improved by changing from the default preferred renderer mode of DirectX9 to the alternative Software setting.

Forte form editor wont work, missing *.form file

Similar Messages

Maybe you are looking for