Forte Integration With Exchange or Netscape CalendarServer

Hi folks.
I am trying to write an application that will either talk to Ms Exchange
or the Netscape Calender Server.
The application should automatically make an appointment on the user's
calendar based on the time and date specificied. Over here I am not sure
what components that Microsoft or Netscape has provided for us to
integrate with their calendar systems? Has anyone actually implemented
this? What are the alternatives that I have?
Will Ms MAPI or Netscape's Messaging Access SDK works?
Thanks
from: Suen

What you need to do is integrate Forte with MAPI.
You can either create a Forte 'C' project that has a direct mapping to
each of the functions supported by MAPI OR write a wrapper library for
that accepts the basic parameters to initialize mapi and send/receive
mail and talks to MAPI by itself.
We have taken the second approach and have our application totally
integrated with MAPI.
You can read more about integrating with C in the 'Integrating with
External Systems' manaual.
Inderjyot Singh Sabharwal
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Monday, January 12, 1998 9:59 AM
To: doug; forte-users
Cc: george
Subject: Forte Integration with MS Outlook
Hi all,
Would like to ask if anyone has done any integration between Forte and
Microsoft Outlook? or even Exchange?
Would appreciate any information.
Thanks,
Steven Wong
Distributed Objects Sdn. Bhd.
22, Jalan USJ 9/5T,
47620 UEP Subang Jaya,
Selangor Darul Ehsan, Malaysia.
Tel : (603) 5310 777 ext. 309
(603) 5310 222 ext. 309
Email : [email protected]

Similar Messages

Forte integration with Accounting packages

Hello all,
I would like to have more information about how Forte has been used
to integrate with Accounting packages. Any information would be
beneficial to me.
Thank you.

What you need to do is integrate Forte with MAPI.
You can either create a Forte 'C' project that has a direct mapping to
each of the functions supported by MAPI OR write a wrapper library for
that accepts the basic parameters to initialize mapi and send/receive
mail and talks to MAPI by itself.
We have taken the second approach and have our application totally
integrated with MAPI.
You can read more about integrating with C in the 'Integrating with
External Systems' manaual.
Inderjyot Singh Sabharwal
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Monday, January 12, 1998 9:59 AM
To: doug; forte-users
Cc: george
Subject: Forte Integration with MS Outlook
Hi all,
Would like to ask if anyone has done any integration between Forte and
Microsoft Outlook? or even Exchange?
Would appreciate any information.
Thanks,
Steven Wong
Distributed Objects Sdn. Bhd.
22, Jalan USJ 9/5T,
47620 UEP Subang Jaya,
Selangor Darul Ehsan, Malaysia.
Tel : (603) 5310 777 ext. 309
(603) 5310 222 ext. 309
Email : [email protected]

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Forte Integration with AS/400

Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

You can also investigate using IBMs MQ Series. Other message oriented
middleware may also have AS/400 ports available (such as Tuxedo).
-J
Mike Burke wrote:
>
Could you please provide some more information on what you plan to do
here? Are you looking to just pull data from the AS/400? Will you be
sending data back to the AS/400?
The AS/400 has supported Berkley Sockets; since, Release V3R1. Your
best bet for now is probably to use Forte's ExternalConnection class to
communicate with a C socket provider/consumer on the AS/400 side.
Please see Forte's "Integrating With External Systems" manual for
further information on the ExternalConnection class.
Also, I heard a couple of months ago that IBM plans to incorporate a
fully compliant CORBA ORB in a future release of OS/400. I haven't
heard if they have followed through on this. If so, CORBA would provide
another means for you to communicate with your AS/400 from Forte.
- Michael R. Burke
Born Information Services
e-mail: [email protected]
-----Original Message-----
From: Wei Suen Lai [SMTP:[email protected]]
Sent: Thursday, June 11, 1998 5:29 AM
To: Forte User Group
Subject: Forte Integration with AS/400
Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really
urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>--
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
http://www.sageit.com
-----------------------------------------------------

Lync 2013 On Premises integration with Exchange Online Unified Messaging

I am working on deploying Lync 2013 Server on premises and integrating it with Exchange Online. We do not use Exchange on premises.
My question is how to integrate with Unified Messaging specifically. Other functions like Calendar, call logs seem to be working fine.
There are many guides online on how to do this, and I have read many and attempted to follow with no luck. All seem to assume that UM has already been deployed on prem which I don't have. Is this possible to integrate Lync with Exchange Online without having
and Exchange deployment on premises first.
Another source of confusion is the Office Voice Access number and how Lync clients dial voicemail. Where does this go if somebody dials internally (from Lync) and externally (from PSTN)? Exchange online or Lync on prem? And if Lync, then my guess would be
Lync forwards on to Exchange Online UM somehow. Do I have to purchase a number from somewhere because of it being on 365 or can I use a spare DID?
From my tests so far, when I call voicemail as any user, it seems to dial that same user and then the call fails.
Hopefully someone can shed some light on this for me.

You can integrate Exchange UM with Lync Server 2013.
Please check the deployment process at http://technet.microsoft.com/en-us/library/gg398968.aspx
Lisa Zheng
TechNet Community Support

Forte integration with LDAP

Hi.
Has anyone successfully integrated with LDAP using the C library from
LDAP SDK?
Currently I'm facing a problem when I tried to generate the C++ wrapper
for the C library. The compiler is unable to resolved the data type of
some data structs. This is because the definition for these structs are
not defined in any of the include files provided. According to the LDAP
SDK doc, this is because the fields for those data structs are not
intended to be accessible to the clients.
That is why in my wrapper project, I defined these struct, each has the
property Opaque = TRUE.
The following is the error message:
BEGIN FILE
Working directory is d:\forte\tmp\cg13\pc_nt\ldapsrch
Processing BOM file: LDAPSrch.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for
80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
LDAPSrch.cc
LDAPSrch.cc(70) : error C2027: use of undefined type 'BerElement'
LDAPSrch.cc(127) : error C2027: use of undefined type 'LDAP'
LDAPSrch.cc(184) : error C2027: use of undefined type 'LDAPMessage'
LDAPSrch.cc(203) : error C2733: second C linkage of overloaded function
'ldap_init' not allowed
LDAPSrch.cc(204) : error C2733: second C linkage of overloaded function
'ldap_simple_bind_s' not allowed
LDAPSrch.cc(205) : error C2733: second C linkage of overloaded function
'ldap_perror' not allowed
LDAPSrch.cc(206) : error C2733: second C linkage of overloaded function
'ldap_search_s' not allowed
LDAPSrch.cc(207) : error C2733: second C linkage of overloaded function
'ldap_first_entry' not allowed
LDAPSrch.cc(208) : error C2733: second C linkage of overloaded function
'ldap_next_entry' not allowed
LDAPSrch.cc(209) : error C2733: second C linkage of overloaded function
'ldap_get_dn' not allowed
LDAPSrch.cc(210) : error C2733: second C linkage of overloaded function
'ldap_first_attribute' not allowed
LDAPSrch.cc(211) : error C2733: second C linkage of overloaded function
'ldap_next_attribute' not allowed
LDAPSrch.cc(212) : error C2733: second C linkage of overloaded function
'ldap_get_values' not allowed
LDAPSrch.cc(213) : error C2373: 'ldap_value_free' : redefinition;
different
type modifiers
LDAPSrch.cc(214) : error C2733: second C linkage of overloaded function
'ldap_ber_free' not allowed
LDAPSrch.cc(215) : error C2733: second C linkage of overloaded function
'ldap_msgfree' not allowed
LDAPSrch.cc(216) : error C2373: 'ldap_memfree' : redefinition; different
type modifiers
LDAPSrch.cc(217) : error C2733: second C linkage of overloaded function
'ldap_unbind' not allowed
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__
/DLIBOO_DLL
WIN32_LEAN_AND_MEAN /Id
:\forte\install\inc\cmn /Id:\forte\install\inc\os
/Id:\forte\install\inc\ds
/Id:\forte\install\inc\handles /Id:\forte :\forte\LdapAPIs\include
/FoLDAPSrch.obj /Tp LDAPSrch.cc
So, please advise on how should I proceed.
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Anoop,
To adapt an SAP Workflow, you can create a configuration. In this configuration you can redefine values for steps of the workflow definition. These values are evaluated at runtime instead of the values originally defined.
You can configure the following step types:
Activity
User decision
Document from template
Wait
Moreover,Features
You can set the following data individually in the step definition of the configurable step types:
1)Responsible agents
2)Excluded agents
3)Message recipient for completion
4)Priority
5)Requested start
6)Indicator denoting whether the step is included in the    workflow log
7)Activation of a latest end, a latest start, or a requested end with the reaction Send mail
This URL privides info about various workflow codes http://help.sap.com/erp2005_ehp_02/helpdata/en/9b/572614f6ca11d1952e0000e82dec10/content.htm
Regds,
Krutarth
·        Reference date/time for latest end, latest start, and requested end
·        Message recipient for missed deadline
·        Information about the work item display

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

Lync Server Integration with Exchange 2013

Hello,
I have Exchange 2013 standard edition server installed and running successfully on a Windows 2012 machine. Now, I would like to have a Lync 2013 server integrated with it. I came across some links telling that its not possible to integrate Unified Messaging
in the Exchange standard edition and would need an Enterprise edition license. But, when I checked my ECP, I could see that UM is already there and its enabled.
So, Is it possible to integrate Lync 2013 with Exchange 2013 standard edition? What all things I need to take care of while Integrating? If someone could shed some light on this, that would be greatly appreciated.
Thanks and Regards,
Nash Burns

Yes you can integrate Lync 2013 with Exchange 2013 Standard, the only big difference between Exchange 2013 Standard vs Enterprise is the number of mailbox databases (5 vs 50).
Follow this link for information on integrating the two: http://technet.microsoft.com/en-us/library/jj688098.aspx (specifically integrating Lync with Exchange for Voicemail http://technet.microsoft.com/en-us/library/jj687983.aspx)
Having said that, the confusion may be related to User CALs. You need Exchange Enterprise User CALs to use the Unified Messaging components. (I believe they still work regardless, but
to be properly licensed and compliant you need to have the correct number of Enterprise CALs for the number of users that use UM)
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

Lync 2010 Integration with Exchange Online UM

Hi All,
Recently I have got the project to integrate Lync 2010 with Exchange Online UM, I have gone through the TechNet article but it seems very confusing and things are not very clear, can some please please help me out in this that how to setup this, what ports
do I need to allow from on premises to Exchange online UM.
There are some other questions as well which is not clear from TechNet.
1. Create SRV record, when I create the SRV record in external dns then in the host providing this service will be access edge fqdn is this correct.
2. Configure Edge Server for federation (do I need to run this on Edge server or on Lync FE Servers, I believe on FE SErvers is this correct, if yes then do I need to run the setup again on Edge server by exporting Topology or the replication will
do the needful)
3. To Create a hosting provider do I need to run this command on Edge or on Lync FE Servers.
4. To create a hosting provider you need to run the command
New-CsHostingProvider -Identity Fabrikam.com -Enabled $True -EnabledSharedAddressSpace $True -HostsOCSUsers $False -ProxyFQDN "proxyserver.fabrikam.com" -IsLocal $False -VerficationLevel UseSourceVerification
now from the above command -Identity what will be the Identity name it can be any thing or it should be some thing related to exchange online um.
for -proxyfqdn what will be the FQDN name here, from where I can get this name
5. Do I need to add or remove any domain names in office 365 if yes then what domain names it will be
6. If my sip address is abc.com then do I have to add this domain name in exchange online or do I need to add another domain name how this setup will be
7. if I will create any new domain in the dns in office 365 then do I need to add this domain name in my external dns if yes then which ip it will be pointed to.
Please guys help me out as I m new to exchange um online and I have never integrated it before.
Appreciate your help
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

1. Yes, create an SRV as per Lync documentation for external access to Edge.
2. Correct, all config is done on
Front End and will be replicated to the Edge servers. As long as your Edge servers are replicating successfully theere is no need to do a manual import.
3. Run this PowerShell on the Front End
4. Identity is a name to identify the hosting provider such as "Exchange Online". See http://technet.microsoft.com/en-us/library/gg398490.aspx
proxyfqdn for Exchange Online is exap.um.outlook.com
5. Your SIP domain will need to be added a a vanity domain in Office 365
6. Same as above, just add as vanity domain
7. Any added domains need to be setup as per Office 365 documentation, nothing special needs to be done for UM integration.
Check this out for more info - http://lyncinsider.com/instant-messaging/how-to-connect-lync-server-to-exchange-online-part-1/
Andrew Morpeth
Lync Server Specialist - Auckland, NZ
Check out my blog

Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Portal integration with Exchange SSO issue

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain. The latest Kerbmap filter is configured in the Exchange back end server. Everything works fine when we do User Mapping.
The SSO for Outlook Web Access works fine when pointed to the exchange back end server directly.
The SSO for groupware functionality such as appointments doesn't work. The error message is "No logon data found for system Exchange". The Exchange system is configured for SAPlogontickets and so i don't understand why its looking for user mapping.
Anyone faced a similar problem? does anyone made this to work using SSO?
Thanks,
~Yasin

hi Mannings,
there will be a new business package for SEM which will be relased and will be based on Web Dynpro. They will create views for integrating BPS, BSC etc for you by default and with the Portal Look and Feel too. But you might have to wait a while for that. AS for SSO - SSO tickets are absolutely supported and fine.
Currently you can use BSP iviews to integrate SEM BSP applications into the portal.
For Integrating BW in portal, the steps you have mentined are for information boradcasting from BW. A very simple way would be to create BW reports based iviews and just supply the query string for the bw report to be integrated. For transactions and other areas you can use the internal ITS provided with 640.

Cisco Unified Communications integration with Exchange cloud service

Has anyone integrated Presence and/or Unity Connection with an Cloud based Exchange provider service? Presence would be for calendar integration and Unity Connection would be for Unified Messaging (Single inbox for vmail and email)?
Thanks,
Mark

Yes, BPOS is supported in CUC 8.5
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg010.html

SharePoint 2010 User Integration with Exchange 2010 New Users Created as Hidden and Later Unhidden not receiving email from SharePoint

When we have a new employee transfer to us from another department, their email is created and hidden until they actually make the transfer so they don't have two different email addresses in our global address list. When the transfer is made, the
email address is unhidden, but then we are unable to send emails to them from sharepoint 2010 without doing an IISReset. We are using Exchange 2010. Does anyone have suggestions on how to alleviate this issue?

Hi,
I have done a test, no matter the email address is hidden or not, we can both send email to the email address in the same domain.
How was the new employee from another department transferred to your department?
Whether sending emails to them need do an IIS Reset everytime.
Here is a similar post, you can take a look at:
https://social.technet.microsoft.com/forums/sharepoint/en-US/6a9043bb-2055-46a9-8e76-8b2698c1dbe5/user-not-receiving-sharepoint-emails
Best Regards,
Lisa Chen

CUCM 8.6.2.20000-2 integrated with Office 365?

Hi people,
VOICE MAIL APPLICATION:
Does anybody knows something like that? How to integrate with Cisco Unified Communication Manager 8.6? It is similar the integration with Exchange 2010?
Best regards,
Daniel

Unless you can create a SIP trunk on Office 365 and allow traffic to pass between CUCM and Office 365 across the SIP trunk it would not work. Cisco never supported any Exchange UM for voicemail, it works, but if you have issues Cisco is not going to help you there. No different here, if you can get it to work based on the above, then support is on you.
HTH,
Chris

CUC 8.5 UM integration with multiple AD Forest

Hi Guys,
I need to do a unity connection 8.5 UM integration with exchange 2003 and 2010 in two different AD Forest. AD 2003/exchange 2003 is in one Forest (Account Forest) with 2003 mailboxes on a corporate network AND AD 2008/exchange 2010 is in second Forest (Resource Forest) with 2010 mailboxes in the CLOUD. There is also a trust relationship between 2 AD Forest. As per unity connection 8.x SRND, we must create separate unified messaging services account (AD account) for each Forest.
Given the above scenario, I think we need 2 AD accounts, one on AD 2003 (for exchange 2003 mailboxes) and second one on AD 2008 (for exchange 2010 mailboxes). However, in this configuration if mailboxes are moved from 2003 to 2010 we will have to manually disassociate the unity connection subscriber mailbox with unified messaging service account (AD 2003 account) and re-associate it with unified messaging service account (AD 2008 account), is that correct? or is there a way to automate this if the mailboxes are moved to 2010 unity connection automatically detects the change?
Any pointers in the right direction would be much appreciated.
Thanks

Can any one comment on this please? Perhaps TAC engineers might be able to provide some insight?
Thanks

Forte Integration With Exchange or Netscape CalendarServer

Similar Messages

Maybe you are looking for