Forte on Intel Solaris

Hi,
Has anyone maybe tried to run Forte on Solaris for the Intel Platform? I
you have, I would like to hear your comments, also what version:
Solaris 7 (Intel Platform Edition)
Solaris 2.6 (Intel Platform Edition)
Solaris 2.5/2.5.1 x86
Solaris 2.4 x86
The Forte 3.0.G documentation I have, does not include Intel Solaris as
a supported platform, but I was just curious.
Thanks
Riaan
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

What is the code to increment that static variable?
I assume there is a function in the same translation
unit that performs this increment.
You can trace it in dbx (or with dtrace) to check if
it is ever called.Yes the static variable does get incremented in the same file and the function doing the increment get's called.. Remember this all works fine under Solaris 8.
I'd love to use dbx but we found that we needed to make one huge so file to get dbx running usefully before. Dloading files under dbx didn't seem to work. Remember that this is a huge app and we have modules from all over the place each with a different build strategy.
Something seems to be clobbering my static variables. I'm think that maybe a structure size has changed since Solaris 8 and maybe that's overwriting stuff. Or maybe we did have a memory issue that Solaris 8 ignores. I remember we had plenty of those when upgrading from Solaris 4/6.
But it looks like I may need to roll up my sleeves and try a full recompile. Deep sigh.
Any more help would be appreciated.

Similar Messages

  • Weblogic on Intel Solaris(x86)

    How to install weblogic 5.0 on intel solaris ..
    I have weblogic 5.0 for sparc ..
    And I am not finding any weblogic for intel solaris in platform sections at weblogic site...
    Can I use sparc's weblogic for intel..
    Please suggest me..
    thanks,
    Laxman.

    Weblogic 6.1 SP1 & SP2 works more or less on
    solaris 8 for intel if you switch of native
    ssl and are not trying to use clustering.
    Note: this is my personal experience, bea
    does NOT support such a configuration
    Michael Young <[email protected]> wrote:
    Hi.
    For WLS 5.1 the zip installation for unix machines is the same, but more
    importantly we do not
    support Solaris/Intel platforms. Even if you install ok the native libs
    for solaris are all for
    sparc platforms so I don't know if it will run.
    Your best bet is to run on one of our supported platforms per
    http://edocs.bea.com/wls/platforms/index.html.
    Regards,
    Michael
    Laxman wrote:
    How to install weblogic 5.0 on intel solaris ..
    I have weblogic 5.0 for sparc ..
    And I am not finding any weblogic for intel solaris in platform sectionsat weblogic site...
    Can I use sparc's weblogic for intel..
    Please suggest me..
    thanks,
    Laxman.--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • 9i for intel solaris

    from where to download oracle 9i for intel solaris version 5.8
    please help
    thanks in advance.

    Hai,
    This is chandra sekaran from singapore, actually i want intel based soaris oracle free cd any verson. Please if you have send one copy by shipping i pay and collect or where i can download. I need very urgently, help me to get as soon as possible. Is there any possible to download from website. please mention the website name. I may download it.
    thanking u
    my address
    S.Chandra sekaran
    Blk 84 # 07-93
    Commonwealth close
    singapore 140084
    by chandran.s

  • How to recompile the Intel Solaris kernel

    HI,
    I installed Intel solaris on x86 system. As per the manual U should change parameters in /etc/system file to configure semaphores and kernel memory . After updating the /etc/system file ,restart is required to take parameters in effect. But even after reboot the system is not getting configured as per the /etc/system settings.
    Is there any other way to recompile the kernel?
    Please let me know on [email protected]
    Thanks in Advance,
    Sagar

    You never recompile the Solaris kernel. Exactly what are you putting in /etc/system? How are you determining whether or not the changes took effect? What release of Solaris?

  • Native Performance pack for Intel Solaris

    Do we have native performance pack for Intel Solaris? We are using
    Weblogic 4.5.1
    Thanks
    Nagaraj

    You have to add that directory to you LD_LIBRARY_PATH, not PATH
    K.P. Patel <[email protected]> wrote in message
    news:[email protected]..
    never mind... I got it.. For some odd reason, I restarted weblogic few
    times...and it picked up....
    thanks
    "K.P. Patel" <[email protected]> wrote in message
    news:3ad64fb6$[email protected]..
    yep, these property was set to true already....still doesn't load
    performance pack
    "Kumar Allamraju" <[email protected]> wrote in message
    news:[email protected]..
    Add the following property in weblogic.properties file.
    weblogic.system.nativeIO.enable=true
    Kumar
    "K.P. Patel" wrote:
    How do I include/install performance pack on my Solaris system for
    WLS
    5.1
    I included $WAS_HOME/lib/solaris in my PATH in the startup script
    which
    didn't help any
    thanks
    kp

  • Popular NIC for Intel Solaris 8

    Hi List,
    Can anyone of you give me the model and name of popular NIC which has a driver in Intel Solaris 8.
    I checked out the HCL and it really does not help.
    Thanks
    Vasanth

    Intel(R) PRO/100B PCI Adapter (TX) came up without issue.
    Lee

  • Where can I find Oracle 8i intel solaris ver.?

    I installed intel-solaris on my PC. and I need to install oracle DB for study,
    but I can't find it. Should I buy oracle 8i?
    Thanks for your help.

    I got Oracle8i, I believe 8.1.5, from Sun as a part of the package, when I got my Solaris8 for Intel.
    I had to go to the Oracle Store to get Oracle8i 8.1.7. (http://oraclestore.oracle.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=11539)
    I ordered the CD Pack.
    Sorry I do not know where it can be downloaded.

  • Ftp is very slow locally with intel solaris 8 with 98 se buffalo ( 100mps)

    why? what to check? ping ok.
    3 com 3c905b card installed with solaris 8 connected with linksys router.
    Buffalo installed in 98 se 100 mps
    cable modem with dynamic ip.
    I have tried FTP in 98 SE with LINUX 6.0 RH via LINKSYS router with ver 1.37 ( 1.37 is even worser than 1.36-because the status is not refresh but itself) is ok.
    but 98SE with intel solaris 8 is very slow with wu-ftp(ipswitch) 1%, then 1%....etc an hour later still 1%. I shut down the solaris try a few times, then it is ok. all connection is tight.
    some one said::
    The most common mistake that causes bad throughput is mixing
    full-duplex and half-duplex stations on the same LAN.
    HOWTO solve full-duplex and half -duplex??
    thanks for your attention!
    SUN learner.

    why? what to check? ping ok.
    3 com 3c905b card installed with solaris 8 connected with linksys router.
    Buffalo installed in 98 se 100 mps
    cable modem with dynamic ip.
    I have tried FTP in 98 SE with LINUX 6.0 RH via LINKSYS router with ver 1.37 ( 1.37 is even worser than 1.36-because the status is not refresh but itself) is ok.
    but 98SE with intel solaris 8 is very slow with wu-ftp(ipswitch) 1%, then 1%....etc an hour later still 1%. I shut down the solaris try a few times, then it is ok. all connection is tight.
    some one said::
    The most common mistake that causes bad throughput is mixing
    full-duplex and half-duplex stations on the same LAN.
    HOWTO solve full-duplex and half -duplex??
    thanks for your attention!
    SUN learner.

  • Forte/UDS and SOlaris running on Intel platforms

    I am interested in knowing your experiences about Forte/UDS running on Solaris/Intel, specially DELL boxes. Please, you can email me at [email protected] Information about problems and known bugs will be highly appreciated.
    Thanks for your help.

    I am interested in knowing your experiences about Forte/UDS running on Solaris/Intel, specially DELL boxes. Please, you can email me at [email protected]. Information about problems and known bugs will be highly appreciated.
    Thanks for your help.

  • Oracle 8i download for intel solaris

    Hi guys,
    I need oracle 8i software for solaris but its a intel machine not sparc.can anybody guide me to get it on the download center??.

    This download is not available on the OTN site. We recommend that if you live within the United States or Canada to check with the Oracle Store for product availability:http://otn.oracle.com/software/store/discount.html
    Best Regards, OTN Team

  • OS metrics for Intel Solaris

    where can i find the Solaris Intel OS metrics?
    Best Regards,
    Guruprasad S

    Solaris x86 download of 7.0 update 2 is available:
    http://wwws.sun.com/software/download/products/3f7df408.html
    7.1 will also be available on Solaris x86.

  • AppServer for Intel Solaris

    How about an Intel/x86 platform Solaris version of Sun ONE Application Server?

    Solaris x86 download of 7.0 update 2 is available:
    http://wwws.sun.com/software/download/products/3f7df408.html
    7.1 will also be available on Solaris x86.

  • Problems withh Floopy on Intel Solaris 8

    I am not geeting to mount my floppy on Solaris Intel 8
    When I try to access the Floppy i receive the message:
    Floppy has no media
    When I run volcheck
    Floppy has no media
    When I try to access /vol/dev/aliases/floppy/floppy0
    The directory does not exists
    Somebody experimented this problem, please help me

    I did not find solution yet, as soon I discover I will explain the process.
    Thanks
    Bobby.Galla

  • Using Intel Solaris 8 with 2 monitors

    We are developping an application under Solaris 8 Intel that will use 2 monitors. We have learn that Matrox and Colorgraphics provide twin head boards that, when driven by a XiGraphics driver, will manage the 2 monitors.
    Did anyone have this experience? How did it work out? Any suggestion?
    Thanks for the help!

    I have those setting and I still don't know how to have the video playback in one PC display and the look controls in another.
    I can move the entire Sg program to either monitor fine, but when I unlock, say the waveform monitor, it is not visible when I drag it into the other monitor.
    I have dual HD HDMI PC monitors: 1920 x 1080
    My settings:
    Dual Display Output: Enable
    Widow size
    Left: 1920
    Top: 0
    Width: 1920
    Height: 1080

  • Forte Installation on Solaris 2.6

    Hi ,
    I am unable to install ForteCE on Solaris 2.6 .
    Can you please tell me if i need any patches to Install forte on Solaris .
    Thanx and Rgds,
    Preeti

    The official statement could be obtained by a search at the main web site http://www.sun.com
    ldapv2 patch "solaris 2.6"
    http://docs.sun.com/source/819-1814-10/relnotes_ds51sp4.html
    ===
    This release of Directory Server is not supported on Sun Solaris 2.6 or Sun Solaris 7. You must upgrade to Sun Solaris 8 before upgrading to or installing Directory Server 5.1 Service Pack 4.
    ===
    If this happens to DS5.2, it should apply to DS5.2 also, I reckon.
    Gary

Maybe you are looking for

  • Can no longer change bit rate in AAC custom import settings

    I've been re-ripping all my CDs at the new higher bit rate. My import settings were AAC Encoder -- custom, originally set to 256 kbps, VBR, and auto for the other two settings. However, some CDs I wanted at a lower setting, so I would go change the b

  • Photo gallery navigation Master/Detail

    I am trying to make a photo gallery with Master/Detail pages in one - which is working up to a point. I have 2 recordsets: - A: one with all records which displays thumbnail icons in a horizontal looper. - B: another with a single url-parsed value. W

  • ISE 1.2 Timezones

    Hi everybody Does anyone know how to change the time displayed in the GUI (Monitoring/Authentication)? On the Commandline we did set the timezone when installig the ISE, but when troubleshooting in the GUI the time is displayed with "wrong" timezone.

  • How Do You Display the key in the F4 Value Help

    I have setup a characteristic variable for Ship-To party as a Select Option. However when displaying the possible list of entries using the F4 key, the key to the table ie the Customer number is NOT displayed. Instead the search help starts with the

  • Can't connect to my database problem with listener or tnsname help urgent

    Hi here are the problems i get sqlplus scott/tiger@CHUCKY SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 13:51:24 2006 Copyright (c) 1982, 2005, Oracle. All rights reserved. ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory rea